Saludos ofrezco licencias o venta de la patente por país, es la WO2024/123169 link: https://patentscope.wipo.int/search/es/detail.jsf?docId=WO2024123169&_cid=P11-LXWM4H-16420-1 para que puedan fabricar y vender la turbina eólica plegable la cual es muy eficiente pues no se le escapa el viento por entre sus palas, es muy duradera y económica puede ser construida de acero y también sus palas, que al estar la turbina con su centro de gravedad en equilibrio que termina en punta en la parte de abajo, es fácil de mover, los rodamientos duran mucho pues no sostienen a la turbina solo la guían, y con un adecuado mantenimiento de pintura cada ciertos años puede durar un siglo o más. La turbina es de eje vertical plegable y multi configurable toma la fuerza del viento con la forma cóncava cerrada y cuando viene contra el viento con forma convexa abierta, no desperdicia la fuerza como la turbina Savonius. En las publicaciones de mi perfil aquí en Linkedin usuario: Jorge Fletes esta la información, videos de prototipos y la patente en español e inglés, también información de contacto. Gracias
IOGP 624 - Technical specification for calibration and verification of offshore surface survey and positioning systems
This document provides a global common industry technical specification for surface positioning sensor and system calibration and verification, during mobilization and on an ongoing basis. It covers the Online Survey and Positioning System, Global Navigation Satellite Systems (GNSS), Attitude and Heading Reference Systems (AHRS) and Inertial Navigation System (INS). It is intended to be included in contract documentation throughout the offshore energy industry, including relevant renewables activities. This includes seismic, site, and route surveys, rig and well positioning, asset inspection, and the full range of construction survey and positioning (S&P) support. A supporting guideline to this document provides additional technical guidance and recommendations, to assist with delivery of projects according to this specification.
Copyright IOGP
#offshoreoilandgas#geomatics#geomaticsengineering#gps#drillingcontractor#oilandgascompanies#calibrationservices#rigmove#seismic#oilandgasindustry#oilandgasexploration#iogp
Pioneering exploratory geotechnical surveys for the construction of offshore wind farm Ossian have recently been completed, involving Ocean Infinity's new Infinity CPT 250. Read more >> https://hubs.la/Q0294fKq0
Ossian will have the potential to produce up to 3.6 gigawatts (GW) of energy, enough to power up to six million homes. Once completed, it will be one of the largest floating offshore wind farms in the world.
Since spring 2023, Ocean Infinity has supported with detailed geotechnical surveys to assess the engineering properties of the seabed across the expansive site. Its scope included 90 seabed cone penetration tests (CPT), 45 seabed seismic cone penetration tests, and 20 vibrocores.
Deep push seabed CPTs were carried out remotely in a significant industry first operation of its kind. ‘Over-the-horizon’ commands were sent via a remote-control system, which directed the successful operations of the Infinity CPT 250.
Learn more at the Ocean Science & Technology website.
#subsea#survey#geotechnicalsurvey#unmanned#geotechnical#renewableenergy#environment#automation#oceanscience#oceantech#wind#windfarm#sustainability
Service Operations Vessels (SOVs) are essential parts of puzzles named maintaining offshore wind turbines and oil platforms. Without them, optimal function cannot be guaranteed. Due to the unstable nature of ocean conditions, operating these vessels demands a combination of skilled expertise, historical knowledge, and advanced technology. The most important? The safety. Of all the crew, equipment, and operations. In just a bit, we'll chat about why emergency preparedness is important for SOVs, leaning on top-notch safety tips.
Learn more: https://bit.ly/47mgYyA#offshoresafety#walktowork#BecauseItWorks
Beneath the Surface: Navigating Subsea Production Systems
Ever marveled at the intricacies of offshore energy production? 😁 Look no further than subsea production systems, the silent workhorses powering our underwater energy endeavors. Let's dive into the depths and unravel the mysteries of their installation and operation processes.
📌 Installation: Picture a ballet of colossal machinery and meticulous planning beneath the ocean's surface. Installing subsea production systems requires precision engineering and logistical finesse. From subsea trees to manifolds, each component is carefully lowered, positioned, and secured to the seabed, often in challenging environments.
📌 Operation Processes: Once installed, these systems come alive, orchestrating a symphony of production beneath the waves. Subsea production systems harness the raw energy of underwater reservoirs, extracting oil and gas through a network of pipelines and control umbilicals. Remote-operated vehicles (ROVs) play a crucial role, conducting maintenance and inspections in the unforgiving depths.
Curious to Know More? Witness the mesmerizing process of subsea pipeline installation firsthand: https://lnkd.in/dtyR9izh
Challenges and Innovations:
Operating in the harsh subsea environment poses unique challenges. Corrosion, hydrates, and equipment failure are constant threats. Yet, the industry continues to innovate, pushing the boundaries of technology to enhance reliability, efficiency, and environmental stewardship.
Why It Matters 🤔 :
Subsea production systems represent the frontier of offshore energy extraction, enabling access to untapped reserves and reducing environmental impact. Understanding their installation and operation processes is key to ensuring safe, sustainable energy production for generations to come.
OTC is dedicated to fueling knowledge in the oil and gas industry. Check out our training courses to quench your thirst for knowledge in this dynamic field.
#OffshoreEnergy#SubseaProduction#InnovationInOilAndGas#EngineeringExcellence
It is not an exaggeration if we claim that #windenergy production is #inherentlysafer than O&G production. Despite this, every operation in an offshore #windpark needs to be carefully planned and executed. One of these operation is travel to and from a #WTG.
#Helicopter transport to offshore wind turbine follows the same safe and proven-in-use techniques, procedures and machineries developed for the offshore O&G installations.
However, there are some differences. Video shows a technician is hoisted down to #nascell of an offshore wind turbine to perform critical maintenance work. Such risky operation requires among others proper training, clear communication, parking of wind turbine in the correct position, state of the art helicopters and experienced pilots. Nothing will be left to chance or luck!
Subsea Installation concept
The challenges and the issues of subsea installation may be classified in the following general areas:
1- Lifting and lowering technology - Those issues directly related to the weight of the loads to be lowered to the deep seabed, the dynamic responses that can augment these loads, and the capability of the lifting systems.
2- Load control and positioning - Issues related to placing the load in the desired location, at the correct compass heading, and at a stable attitude on the seabed.
3- Metocean (meteorological and oceanographic) effects and weather window requirements
In order to design and operate offshore installations in a safe and efficient manner it is essential that a good knowledge is available of the met ocean (meteorological and oceanographic) conditions to which the installation may be exposed. Of most importance is the wind, wave current and tidal conditions at the location of the installation. However, at some locations and for specific types of operations, other parameters may be important (e.g. air and sea temperature, visibility and ice conditions).
#subsea#subseaengineering#offshore#offshoreoilandgas#oilandgasindustry
Hey all!
A few years ago, while I was working at the Numerical Offshore Tank (TPN-USP), we started doing wave basin tests of floating offshore wind turbines to validate our numerical models. The main challenge of such tests is that you cannot physically scale both the hydrodynamic and the aerodynamic aspects of the problem at the same time — the waves like to hang out with Froude, but aerodynamics prefers Reynolds.
The solution we adopted was to use a software-in-the-loop approach (SIL) to account for both hydrodynamic and aerodynamic loads at the same time. The whole thing is explained in our recent Ocean Engineering paper (https://lnkd.in/eV3iG6E2 free access until August 09, 2024). In short, the idea is to split the problem into two parts: (i) a Froude-scaled floating platform in the wave basin, and (ii) a numerical model that is responsible for solving the aerodynamic loads in real time. The aerodynamic loads are applied on the floating platform using a set of actuators — in our case, a pair of wind propellers located at hub height. The resulting motions, due to both wind and waves, are measured and fed to the numerical model to account for the instantaneous position of the rotor and for the relative wind velocity at the virtual blades. Hopefully, the diagrams and explanations in the paper can make that clearer!
The underlying assumption is that we trust the aerodynamic model, which is fine in our case. As a wave basin, our goal is to investigate hydrodynamic phenomena — wind tunnels can do the opposite and use hybrid models where they focus on aerodynamic phenomena. In that paper, we use this experimental capability to investigate three important aspects of hydrodynamic numerical models: the importance of considering directional drag coefficients for the pontoons of the floating platform; the relevance of second-order resonant motions in both the horizontal and vertical planes; and the influence of floater tilt on the wave-induced dynamics. We also discuss the capabilities and limitations of the experimental method. Feel free to get in touch if you have any questions!
This work was developed under a R&D project in partnership with Petrobras to investigate and develop floating offshore wind turbines in deep waters. Many thanks to Petrobras, USP - Universidade de São Paulo, Numerical Offshore Tank (TPN-USP), and my co-authors Pedro Cardozo de Mello, Renato Monaro, Jordi Mas-Soler, Alexandre N. Simos, and Daniel Carvalho!
Director | Certificado en Empresa, gestión, marketing, investigación y desarrollo
2wSaludos ofrezco licencias o venta de la patente por país, es la WO2024/123169 link: https://patentscope.wipo.int/search/es/detail.jsf?docId=WO2024123169&_cid=P11-LXWM4H-16420-1 para que puedan fabricar y vender la turbina eólica plegable la cual es muy eficiente pues no se le escapa el viento por entre sus palas, es muy duradera y económica puede ser construida de acero y también sus palas, que al estar la turbina con su centro de gravedad en equilibrio que termina en punta en la parte de abajo, es fácil de mover, los rodamientos duran mucho pues no sostienen a la turbina solo la guían, y con un adecuado mantenimiento de pintura cada ciertos años puede durar un siglo o más. La turbina es de eje vertical plegable y multi configurable toma la fuerza del viento con la forma cóncava cerrada y cuando viene contra el viento con forma convexa abierta, no desperdicia la fuerza como la turbina Savonius. En las publicaciones de mi perfil aquí en Linkedin usuario: Jorge Fletes esta la información, videos de prototipos y la patente en español e inglés, también información de contacto. Gracias