b-plus Group 𝐚𝐧𝐝 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 𝐩𝐨𝐨𝐥 𝐞𝐱𝐩𝐞𝐫𝐭𝐢𝐬𝐞 𝐟𝐨𝐫 𝐩𝐫𝐞𝐜𝐢𝐬𝐞 𝐝𝐚𝐭𝐚 𝐚𝐜𝐪𝐮𝐢𝐬𝐢𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐬𝐭𝐨𝐫𝐚𝐠𝐞
Both companies rely on high-speed communication and comprehensive interface expertise
München, 2024/06/17 – Two Bavarian companies are working together to enable high-speed recording of large volumes of data, covering both the raw data streams from the sensors and the bus and network communication in the vehicle.
The capture modules from Technica Engineering were developed to record vehicle communication technologies (e.g. CAN, FlexRay, LIN and Automotive Ethernet) in a distributed, modular and scalable manner. This allows users maximum flexibility and cost efficiency through reusability.
At the same time, the data recorder from b-plus not only impresses with its high performance and robust hardware, but with AVETO.dps also offers a software solution that makes it possible to log data rates of over 100 Gbit/s precisely and synchronously.
𝑯𝒐𝒘 𝒅𝒐𝒆𝒔 𝒕𝒉𝒊𝒔 𝒄𝒐𝒎𝒃𝒊𝒏𝒂𝒕𝒊𝒐𝒏 𝒐𝒇 𝒔𝒐𝒍𝒖𝒕𝒊𝒐𝒏𝒔 𝒃𝒆𝒏𝒆𝒇𝒊𝒕 𝒖𝒔𝒆𝒓𝒔?
The volume of data has increased dramatically in recent years, particularly in the ADAS/AD environment. In addition, the communication technologies used, such as the SerDes solutions used, are changing. A modular and powerful complete solution is therefore essential in order to protect the customer's investment and at the same time achieve high data quality.
The increased use of SDV (Software Defined Vehicle) architectures will further intensify the trend towards more data with increasing demands on data quality over the next few years. The use of the new and open protocol standard ASAM CMP will play a key role in future-proofing the system. It provides the basis for modern, distributed and time-synchronized data recording and is supported by b-plus and Technica Engineering.
Thanks to its outstanding scalability, it can be used cost-effectively in test vehicles, vehicles, functional tests and complex test benches (HiL, system network test benches, LabCar, etc.) and in practically all vehicle domains.
Johannes Zangerle, Business Developer at b-plus Group said:
"I am delighted about the collaboration with Technica, as together we can integrate an extended variety of interfaces into the vehicle. This collaboration expands our portfolio and offers our customers a comprehensive overall solution."
Erick Parra, Business Development Director of Technica Engineering GmbH said:
"This solution simplifies fault diagnosis for the engineer. Development scopes can be simplified and development cycles can be further shortened. We are thus preparing vehicle development for the future."
More information about b-plus and Technica Engineering can be found on the websites https://bit.ly/3xkTFsJ and https://bit.ly/4er4ZEb
#TechnicaEngineering #b-plus #AutomotiveEthernet #OneStepAhead
