Stamicarbon’s Post

PID Control of ABB Drives PID (Proportional-Integral-Derivative) control is a widely used technique in industrial automation to achieve precise control of various processes. In process PID control, a process reference (setpoint) is connected to the drive instead of a speed reference. An actual value (process feedback) is also brought back to the drive. The process PID control adjusts the drive speed in order to keep the measured process quantity (actual value) at the desired level (setpoint). This means that user does not need to set a frequency/speed/torque reference to the drive but the drive adjust its operation according to the process PID. In this video, we will explain the basic principles of PID control and demonstrate how to set up and tune the PID parameters using the ACS180 and ACS380 drives.

COMPACT SAFETY ⚠️ Set new standards in safe machine automation with the samos® PRO COMPACT; a modular,space-saving & programmable safety controller from Wieland Electric. samos® PRO COMPACT can be flexibly scaled for different machine and plant sizes with up to 116 safe inputs and 56 outputs with 12 I/O modules, as well as facilitating usage of safe and standard I/O modules in one system. Safety functions are parameterised in compliance with standards via the intuitive and license-free samos ® PLAN 6 software with a focus on user-friendly, standards-compliant implementation and simple integration into higher-level systems. What about communication? 🧐 All common #IndustrialEthernet protocols are supported including, PROFINET, EtherNet/IP and Modbus TCP integrated on the base module ✅ External gateways are also available for CANopen, PROFIBUS and EtherCAT with the ability to operate two external gateways and one integrated gateway in parallel. This modular safety controller can also take some heat with an operating temperature range from range from -25°C to 65°C 🌡️ COMPACT - INTEGRATED -SCALABLE 👍 #FunctionalSafety #MachineSafety #SafetyEngineering #PLC #AutomationSafety

How to improve Modbus data trasnsfer speeds? Any solutions, Currently bits some time receives immediately and some times abt 10 secs. PLC - Siemens S7 DCS - Delta V Comms - RS-485 (serial) Distance - abt 500 mts

Explore the process to Read / Write the holding registers of your PLC through Modbus Poll and EcoStruxure Control Expert Simulator. #PLC #IndustrialAutomation #ModbusPoll #ModbusTCP #Communication #Simulator

Every system and machine places its own unique demands on system performance and application complexity. It is important that drive devices and #automation components interact perfectly with one another. 💯 #SINAMICS #V20 can be easily linked to #SIMATIC PLC: Easy system configuration with harmonized PLC libraries and predefined macros in the converter ✔️ Just one cable is required to connect SINAMICS V20 with USS or MODBUS RTU ✔️ Integrated communication interface ✔️ You benefit from easy commissioning using standard libraries and connection macros and also by being able to easily integrate SINAMICS V20 into existing automation systems! 🎯 #WhatDrivesYou #simplymydrive #motioncontrol #vfds

#20 PLC Best Practices – Identify Critical Alerts #plc #PLCprogramming #PLCtraining #PLCtutorials https://lnkd.in/g9VeEPXE

I'm excited to announce that I had an opportunity to conduct a introductory session for our newly joined GET and PGET-2024 batch on simulation testing. During the session, we have covered the basic concept of substation related data flow: 🔍 Substation reporting data and how data flows from field-level devices to the process bus. 🔄 Data flow from the process bus to the station bus over the IEC-61850 protocol, and how the substation reports to the control center SCADA over the IEC-104 protocol. 💡 As part of the hands-on demonstration, we simulated a substation database to simulate breaker status data signals over both IEC-61850 and IEC-104 protocols. Powerful tools and applications we have used for this demonstration are as follows: DS-Agile gateway SCE configurator Equipment Simulator S-Bus Agency VINCI IED-Scout It was a highly interactive session showcasing the valuable insights into the practical aspects of substation reporting and the importance of effective data communication protocols. #SubstationAutomation #SimulationTesting #IEC61850 #IEC104 #SCADA #PowerSystems #EngineeringExcellence #TrainingSession #ProfessionalDevelopment

#20 PLC Best Practices – Identify Critical Alerts #plc #PLCprogramming #PLCtraining #PLCtutorials https://lnkd.in/g9VeEPXE

16) Project (Logixpro Simulator) Batch Simulator A tank in which water is pumped through two pumps that work in exchange with each other. If stop is pressed, then start. Second, it continues the process it was doing before stopping #PLC #Classic_Control #Motor_Drive #Automation