OneSource Distributors’ Post

Pfannenberg hygrostats switch on electrical enclosure heaters or filterfans when a preset relative humidity is exceeded. This prevents condensation of water on electrical components and the corrosion of unprotected sheet metal. #protectingmachines https://hubs.ly/Q02tp30G0

PVC Transparent Electrical Tape is ideal for securing exposed wires and providing flame retardant, waterproof insulation.

💫 In order to solve the fire hazard caused by overheating and ignition of plastic parts inside electrical equipment due to poor contact, overload, short circuit during use, we developed this high glow-wire PP flame retardant T06, with the addition ratio gradually increased from 25% to 35% from GWIT glow-wire 750, 850, and 960 degrees. It has little effect on the mechanical properties of the base resin. It has a certain effect on suppressing smoke generation and is specially used for flame retardant solutions for glow-wire testing without open flames throughout the whole process. #Flameretardant

How to repair and replace cartridge heaters? When repairing or replacing the heating tube, the power supply switch must be disconnected first to ensure the safety of the operation. • After disconnection, wait until the heating tube cools to normal temperature before disassembling it, otherwise it may cause burns. • If there is foreign matter on the surface of the pipe, polish it with a dry rag or fine sandpaper. Do not hit it with sharp metal. • Check the insulation sheathing tube of the power supply wire for damage, oil stains, etc. If any abnormality is found, replace it in time. • Check whether the connection terminals are loose, black, oxidized, etc. If any abnormalities occur, please replace them in time. #CartridgeHeater #HeatingElement #PencilHeater #HeatingTube #Heatingrod #IndustrialHeater #ResistorHeater Website: https://lnkd.in/g-hRscAH For customization please contact: Wechat/WhatsApp: 86 18752641190 Email: [email protected]

🌟 Precautions for using Aluminum vapor chamber: 1.Safe Operation: Before using an aluminum vapor chamber, be sure to read and understand the manufacturer's operating manual and safety guidelines. Be sure to follow all operating procedures and precautions, including proper power supply, operating temperature range, operating environment, etc.  2.Prevent overloading: It is strictly prohibited to place heavy objects exceeding its load-bearing capacity on the aluminum vapor chamber to avoid safety accidents. Make sure to use an object of appropriate size and weight and follow the manufacturer's recommendations.  3.Avoid corrosion: During operation, the aluminum vapor chamber should be cleaned regularly, remove dust, oil stains or other dirt to ensure the heat transfer effect.  4.Avoid collisions and scratches: Be careful when handling and transporting aluminum vapor chambers to avoid surface collisions and scratches to avoid damaging the shell and affecting the heat transfer effect. 5.Avoid over-temperature use: When using aluminum vapor chambers, do not set the temperature above 200°C. There is a risk of liquid leakage and rupture above this temperature. Connect with us for more details: 📧 Email: [email protected] 📞 Call us at : 8615195958906 (WhatsApp & WeChat) 🌐 https://lnkd.in/gmaSbvWV #AluminumVaporChamber #ThermalInnovation #CoolingTechnology #Electronics #InnovationUnleashed 🚀

We have professional engineers who design and develop the most suitable customized evaporative condenser for our customers About the evaportive condenser you need,in order to give you an exact price,we need some parameters as follows: 1.Condensing medium:ammonia or freon or others 2.Total system heat rejection capacity 3.Condensing temperature 4.Wet bulb temperature 5.Material:Galvanized,SS304 or SS316 or others?

💧 Humidity, condensation and then... corrosion? Protect your electrical cabinet from these adverse conditions to maintain component effectiveness and lifespan. Check out our Anti Condensation Heaters range.

CoilSafe® coating compositions protects the heat exchanger coils of your HVAC units, prevents corrosion, and restores existing HVAC systems as close as possible to original factory KW/ton ratings. Learn more about how it works here >> bit.ly/3HqsLB7 #HVACLife #EnergyEfficiency #AntiCorrosion #HVACCoatings

insulation Thermo solution SABS 50mm