MW Components’ Post

Looking for a better and faster way to clean your surgical instruments? The Skytron Flex Ultrasonic Washer-Disinfector is exactly what you need! Its design can simultaneously accommodate orthopedic, robotic, cannulated, and non-cannulated surgical instruments, eliminating the risks associated with manual cleaning while supporting AAMI ST79 Standards. The Flex has triple the capacity of standard ultrasonic washer-disinfectors. That means it can clean and disinfect in less than 40 minutes! And if that’s not fast enough for you, there are also non-critical water rinse cycles available to shorten times even more. Learn more about the Flex Ultrasonic Washer-Disinfector today on our website, https://lnkd.in/gMcjFqi6. Be sure to stay tuned; later this week, we will launch our newsletter, which will cover the misconceptions surrounding the use of ultrasonics in ASCs.  #sterileprocessing #ultrasonic #decontamination #healthcareinnovation #infectionprevention

What if there was ONE solution, a TOTAL solution to daily challenges faced in every department in your facility. What if you could save over half the time in assembly, sterilization and back table setup? What if there was a system that together, could create a consistent surgery schedule avoiding wet packs and holes all while allowing for easily managed inventory? Welcome to The Total Solution. SPD/OR • 50% less instrument trays to set up and process • ONE washer cycle vs. two • ONE back table vs. two • Less loaners needed (space savings) • QR code scanning for set layout accuracy • Efficiency gain in OR set up/tear down Surgeon's • Ability to perform cases efficiently, without delays • Process instrumentation in a more cost-effective manner • Maximize OR time  • Ability to provide high quality, easily repeatable results • Your sets, your way ASC/Hospital • More efficient surgical workflow • Ability to better manage consignment/loaner needs from the OEM • Easy and accurate reproduceable standard processes • Ability to maximize space constraints as case loads increase OEM's • On-site custom layout/assembly • Less instrumentation needed • Shipping cost savings • Consolidation of cases • Shorter manufacturing lead time • Modularity vs. redesign • Consignment model These are just a few of the benefits The Total Solution can provide. Want to learn more? You can visit our products page here https://lnkd.in/e2fCqus8 or reach out to us with any questions here https://lnkd.in/eMHDctm6 #thetotalsolution #onetray #eztrax #onecart #orthopedicsurgeon #asc #hospital #sterileprocessing #operatingroom #CD355

💡Why is #Supervac becoming the go-to device for more and more plastic surgeons performing facelifts and necklifts? 🔍Because of it’s telescopic function allowing it to be used in cavities without the need to switch to a longer electrode? 💨Because of it's smoke evacuation function giving surgeons superior visibility inside the surgical site? 📉Because of it’s integrated nonstick shielded electrodes which are faster and prevent non-target injuries? ☝🏽Because of it's soft-touch buttons that increase precision and reduce finger fatigue? 📲Or because of the 10 special features that it includes? 🔝#Supervac is the top choice for facelifts and necklifts. #Supervac offers surgeons key advantages in efficiency, visibility, and ergonomics leading to a better surgical technique. 🗣️Do you want to try it? Talk to us!! #PrimaMedical #ElectrosurgeryInnovation #Supervac #SmokeEvacuation #SurgicalPlume #Electrosurgery

Patient-Specific Mandibular Reconstruction At CranioTech, we are dedicated to advancing patient-specific medical solutions. Presented is our custom mandibular reconstruction plate, an innovation designed to meet the unique anatomical needs of each patient. Our comprehensive solution includes: 1. Surgical Planning: Utilising advanced virtual surgical planning (VSP) techniques with surgeon preference to ensure precision and optimal outcomes. 2. Patient-Specific Cutting Guides: Customised guides for both the mandible and the fibula, facilitating accurate resection and reconstruction. 3. Custom Implant: A bespoke mandibular plate tailored to fit the patient's anatomy perfectly, enhancing both function and aesthetics. Our planning includes considerations for subsequent free fibula flap reconstruction by optimising the fibula and mandible cuts for vessel anastomosis. Our patient-specific approach ensures that each reconstruction is as unique as the patient it serves, providing a higher quality of life and better clinical outcomes. Join us in our mission to enhance mandibular reconstruction. For more information, visit our website or contact our team directly. #CustomImplants #3DPrinting #MandibularReconstruction #PatientSpecificSolutions #FreeFibulaFlap

Can you imagine the cut efficiency you can achieve with our outstanding CERAMIC BLADE? If PRIMA'S Ceramic Blade electrode demonstrates a cut efficiency of up to 5X higher than a non-stick blade, and the non-stick blade demonstrates a cut efficiency of up to 5X higher than traditional stainless steel blades…. Why are surgeons still using the stainless steel ones? Prima's unique ceramic blade is embedded with a fine tungsten filament at it's core, allowing for faster cutting & coagulation at much lower power settings meaning scarring and damage to the surrounding tissue is drastically minimised giving the best results for both the surgeon and patient. This small component is just a HF surgical electrode, but it can make a huge difference to your surgical performance. Watch the comparison video between a cut made in subcutaneous tissue with a non-stick blade and a Ceramic blade here: https://lnkd.in/e6XCskQW Let us know if you wanna try it? To find out more contact [email protected] #PrimaMedial #ElectrosurergyInnovation #Electrosurgery #CeramicBlade #INNOVACTION

Navigating the messy world of orthopedics can be challenging, with liquid and solid contaminants being a common hurdle when cutting through bones, muscles, and tendons. Discover how our Radix Lens™, a key component of NDI’s Polaris optical navigation technology, maintains smooth workflow and precise navigation. The Radix Lens integrates into OEM surgical instruments for use with NDI’s Polaris optical navigation system as a retroreflective, wipeable passive marker, offering particular benefits during procedures like joint replacements or bone fractures, where the surgical area is exposed to fluids and fragments. Unlike conventional markers, the wipeable, smooth plastic surface of the Radix Lens makes it less susceptible to liquid and particulate contamination, enabling it to maintain tracking accuracy even when partially occluded, ensuring uninterrupted workflow. With the Radix Lens, you can focus on the procedure at hand without worrying about maintaining your instrument's accuracy. Discover how the Radix Lens can revolutionize your surgical precision. Click here to learn more. https://lnkd.in/g2rmzTzn #orthopedic #MedTech #MedicalDevices

Microinstruments: Microsurgery — the suturing of very small anatomy such as vessels (arteries and veins), ducts or nerves — requires high visual magnification and specialized precision instruments. The Symani Surgical System® enables robotic-assisted microsurgery, a revolutionary innovation that allows physicians to complete procedures that are difficult to achieve when manually suturing extremely small vessels. We are pioneering a new surgical space, supermicrosurgery, which allows microsurgeons to address vessels under 0.8 mm in diameter. Our goal is to ensure patients have access to these complex procedures so that they may be healed more efficiently, allowing them to return to their daily activities and improve their quality of life. Symani will enable surgeons to address extremely small anatomy with increased precision and reproducibility. It is the only system that offers wristed microinstruments designed to improve a surgeon’s ability to access and suture small, delicate anatomy. The platform provides motion scaling (7-20X) and tremor reduction to allow the surgeon to perform precise micro-movements through macro gestures.Symani is a flexible platform consisting of two robotic arms that can be easily positioned over any anatomical region to facilitate surgical procedures. Unlike many surgical robotic platforms that require large rooms or dedicated space, Symani can easily be wheeled between ORs. #snsinstitutions #snsdesignthinkers #designthinking

Of all the practical applications of piezoelectricity, none is more prevalent than the generation and subsequent registration of ULTRASOUND. Piezoelectric transducers capable of emitting and receiving ultrasonic waves are used across numerous industries for a myriad of purposes such as medical diagnostics and therapeutics, flow and distance measurement, non-destructive testing and underwater acoustics.  In addition to our vast selection of piezoelectric components and materials, CTS offers both built-to-print and custom designed ULTRASONIC TRANSDUCERS, optimized for the medium in which they must operate. This includes immersion transducers for operation in fluids, contact transducers for solid body measurements and air transducers for use in low acoustic impedance mediums such as gasses. We also design transducers for high-power ultrasonics, used for non-invasive surgery, dental cleaners and ultrasonic welding and cleaning. For our custom solutions, we work closely together with our customers to determine the optimal design and material, ensuring a perfect fit for the application in question. https://lnkd.in/gqpbFcd8 #piezo #ultrasound #transducer #ndt #flowmeter #HIFU

A concise introduction of the forthcoming era of patient-specific craniofacial implants. Enhanced osteoconductive properties, improved surgical maneuverability, and reduced foreign body reactions result in decreased patient recovery duration and enhanced surgical management for the surgeons. #bone #biomedicalengineering #3dprinting #patientspecific #bioprint #tissueengineering #bone_implant #implants #mesh #biodegradable #scaffold #Adli #NIKAbioprinter #Osteoconductive #Bioresorbable #iso13485

Ultrasonic Transducers…