MAX IV Laboratory’s Post

Hi LinkedIn Tribe😎, My team in#TESSOLVE#bangalore/Hyderbad looking for candidates with an experience of 2.5-12 yrs. 🚀#Physical Design (PD) 🚀#STA Engineer 🚀 #Physical Verification(PV) 🕑 Notice period: Immediate joiner Candidates share your resume to [email protected] ✅ 🏅 How to Fix a Setup Violation 🏅 ⛹♀️ Multi-Cycle Path (MCP) 🚰This method has some similarities to pipelining. Similarly, we will let the combinational path finish in multiple cycles. 🚰The difference is we won’t add pipeline registers. Instead, we will capture the data at another capture clock edge This can be done in 2 ways: 🚰Use a control circuit to mask the 1st capture edge and allow another one. 🚰 Use a divided clock for the capture FF as shown in the diagram below

Random thought. Some people in LinkedIn may notice that my technical post spread across pretty wide areas, from power MOSFET characteristic, HW development, control design, firmware programming, python applications, and lastly magnetic analysis. A few last bits that I still have yet to learn is to design following the compliance requirement, though I have recently dipping toe on EMI troubleshooting too. As a PhD candidate, before graduation, I was really hoped to work for the #1 worldwide power electronic company that is based in Taoyuan, Taiwan (where I also currently live and work, albeit with different employer). Though I actually never even received any interview call from this one company (except only one before I joined my current employer, which was also not fruitful). At times I used to compare myself with some classmates who is currently or used to be working there. But, it was hard for me to understand why all my job application was failed (not even getting any callback). Until recently I realized that, in a big corporation the working style is highly niche (I won't call it specialization, due to a few reasons I often see). Where, I won't be easy to fit into the work culture anyway with me being a big mess of generalist specialist as I will over-reach too far. It turned out to be a blessing in disguise, I guess. Quick example, I was once working as FW engineer as my title and I tell the HW engineer (and made them fuming at me) that their 1.5kW design won't go beyond 900W (perhaps ~1kW with screaming fan) and also pointed out a few fatal mistake just by checking the design before even ever write the controller code for it. At the end, my estimate was true that I need to stop at 900W as the mosfet temp goes beyond 105C at room temp in just over 5 mins.

When investing in your content creation - first consider ALL of the places and reasons you actually share... job posting announcements included! The beauty of this approach allows us to not only create your amazing video or prepare CG models of your products - you'll have paved the way to utilize and repurpose the content in unlimited ways for future needs. #investinyourcontent #marketingtips

Hi LinkedIn Tribe😎, My team in#TESSOLVE#bangalore/Hyderbad looking for candidates with an experience of 2-12 yrs. 🚀#Physical Design (PD) 🚀#STA Engineer 🚀 #Physical Verification(PV) 🕑 Notice period: Immediate joiner/ 90 days Candidates share your resume to [email protected] ✅ 🏅 How to Fix a Setup Violation 🏅 ⛹♀️ Multi-Cycle Path (MCP) 🚰This method has some similarities to pipelining. Similarly, we will let the combinational path finish in multiple cycles. 🚰The difference is we won’t add pipeline registers. Instead, we will capture the data at another capture clock edge This can be done in 2 ways: 🚰Use a control circuit to mask the 1st capture edge and allow another one. 🚰 Use a divided clock for the capture FF as shown in the diagram below 

Hello Everyone, We have an urgent Contract to Hire opening of Engineering Technician – Silicon Validation & Screening role at Palo Alto, CA location with one of our direct client! Looking for candidates who must have experience with Silicon/PCB functional testing at board-level and can setup test scripts based on H/W, execute test content and have some software / Linux / Python Script knowledge for debugging. If any one looking for change please share your profile on [email protected]. #pcb #hardware #testing #debugging #testplanning #functionaltesting #linux #python #pcbboard #pcbassembly #pythonscripting

GREAT OPPORTUNITIES

-Wait a minute, Doc. Ah... Are you telling me that you built a Radar SoC... in a DeLorean? -The way I see it, if you're gonna build a Radar SoC into a car, why not do it with some style? -Ok Doc,but we better back up. We don't have enough road to get up to 88Mph. -Roads? Where we're going, we don't need roads.   Bosch to the future 🚗 🔥 🔥 🔥 Do you want to be part of the future of automotive electronics? we have an open position, we are looking for a Senior Mixed Signal Verification Engineer. If you are interested please visit https://lnkd.in/d_EsabWQ and submit your CV. P.S. Thanks to all of you that interact and share my funny posts 😄. Any help is usefull to reach good candidates. This time my manager Miguel Chanca Martin promise me a bonus if a reach a good number of interactions and reactions, so please help me and also help your network to find a very good job in a very good place. Miguel how many reactions for the bonus? 🤣 P.S.2 Some colleagues properly pointed me that I´m losing young people and not reaching GenZ wit my posts. I promise to solve this in my next post, maybe a Frozen based post is a good option 🤣 #LikeABosch #Bosch #hiring #work

We will share insights on assessing the skills of hardware engineers. Stay tuned for expert advice on optimizing your hiring process in the dynamic field of hardware engineering. #HardwareEngineering #TechRecruitment #SkillsAssessment #EngineeringTalent #YRecruiter

"Hello, I am Mehedi Hasan, an experienced Electronics Technician with over 16 years of expertise. Today, I will demonstrate how to clone a 100-pin R5F series microcontroller." Step 1: Tools and Preparation "We need a programmer compatible with the R5F series, the original firmware, programming software, and necessary cables. Ensure all connections are secure and correctly aligned." Step 2: Reading the Original Program "Connect the original microcontroller to the programmer. Use the software to read and save the firmware." Step 3: Writing to the Target Microcontroller "Connect the target microcontroller, open the saved firmware, and program the target device using the software. Verify the written data." Step 4: Testing and Verification "Test the programmed microcontroller in a suitable environment to ensure it operates correctly." Conclusion "Thank you for watching. Connect with me on LinkedIn for more insights and opportunities." #Microcontroller #Electronics #TechSkills #MicrocontrollerProgramming #R5FSeries #TechDemonstration #ElectronicsTechnician #FirmwareCloning #EmbeddedSystems #HardwareEngineering #TechTalent #JobSeekers #Recruitment #USJobs #CanadaJobs #LinkedInVideo #TechShowcase #JobOpportunity #TechnicalExpertise

Hey LinkedIn! 👋 If you're new to following me, I talk about #hardwork, #electricalengineer, #fpgadesign, #hardwareengineer, and #trading. Each topic has its own unique challenges and rewards. As an electrical engineer, I work on designing and developing electrical systems. It's a demanding field that requires precision and attention to detail. FPGA design is another area of interest for me. It's a complex process that involves designing and programming field-programmable gate arrays (FPGAs). Hardware engineering is an exciting field that requires creativity and problem-solving skills. It's amazing to see ideas come to life in the form of physical products. Lastly, trading is a passion of mine. It's a constantly evolving industry that challenges me to stay on top of market trends and news. Let me know which topic interests you the most! ✒️ I'm always happy to share my experiences and insights. #engineering #trading #career #interests #professionaldevelopment