halstrup-walcher ’s Post

Impresses with its robustness and high degree of protection

Just an inch or two can make all the difference! Our laser marker has been a home run from day one. Thanks Ilene C. and Joe Gurley for the great find! 2 years later and it's still running like a champ! This automation for marking our boards has been a complete game changer. It has moved locations as we brought in new equipment and repositioned things, and the exhaust system wasn't working as well in a new location. There were a couple of contributing factors that I could find, and addressed each one. First, the exhaust hose had a couple tears near the hose clamp. Second, I had noticed the smoke would not immediately disappear through the vacuum hose. Sometimes it would hover and appear to dissipate more on its own. It was a simple fix. Just had to loosen two screws and slide the arm holding the vacuum hose closer to the marking zone. After a number of tests to ensure it could never cause an obstruction at its new location, happy to report zero odor can be detected and the smoke is almost gone before you can see it! Sometimes these little fixes are the most rewarding. It didn't take much time at all, but it makes a big impact. The odors produced from laser marking on PCB substrates are not just unpleasant, they can be dangerous if not extracted properly. It took roughly the same amount of time to make the improvement as it did to write this post. Please share quick and simple improvements you have been able to make at your workplace! #smt #processimprovement #continuousimprovement #maintenance #lasermarking

Take a look at our newest industrial part washer! This system is a testament to Better Engineering's dedication to tackling difficult part-cleaning challenges using our extensive experience and innovative approaches. The T-5000 Purifier top-loading part washer was created with customized fixtures that clean, rinse, and dry all inaccessible holes and crevices that cannot be cleaned manually. The standout feature of this industrial cleaning system is a universal clamp that accommodates not only the part it was designed for but also other parts to the same degree of cleanliness.    Interested in learning more? Contact BE for the case study or to request the full video. https://lnkd.in/ehZcyFEs #CustomSolution #BetterEngineering #Manufacturing #IndustrialCleaning #PartWashing #PrecisionCleaning #Sustainability

REDUCE DEFLECTION - Welker's Wedge Lock has a steel body that maximizes side load capacity for securing location. Ideal for applications that need to reduce deflection in lift and locate processes. Learn more here: https://lnkd.in/ehxqtSta #ManufacturingExcellence #Automation #Manufacturing #IndustrialAutomation #WelkerEngineeredProducts

HM 3000 GLASS HOT MELT The Advance Systems Hotmelt HM 3000 is a cutting-edge solution tailored for constant production, offering efficient production capabilities for glass sealed units. With a focus on reliability and performance, this machine is designed to produce up to 350 units within an 8-hour shift, ensuring optimal productivity for your business. Key Features: Average Production: Designed to produce up to 350 sealed units per 8-hour shift, meeting the demands of medium-scale operations. Hopper Capacity: Equipped with a spacious 50 KG hopper, minimising downtime for refills and ensuring continuous operation. Variable Output: Offers a versatile output range of 0-3500 Grammes/min, allowing for precise control over adhesive application based on specific requirements. Five separate heated zones Over temperature: Alarm and cut out One-touch setting for all sealants Constant scrolling display on all zones Standby mode: Protecting the material Calibration programme Timer: Built in Low Temperature Cut Out: Incorporates a low temperature cut out mechanism, Display: Features a user-friendly interface with three display panels, facilitating easy monitoring of machine parameters and operational status. Power Rating: Operates efficiently with a power rating of 415v 16 amps per phase balancing performance and energy consumption effectively.

HM 2000 GLASS HOT MELT The Advance Systems Hotmelt HM 2000 is a cutting-edge solution tailored for the small - medium users looking for the flexibility gf the bigger machines, offering efficient production capabilities for glass sealed units. With a focus on reliability and performance, this machine is designed to produce up to 200 units within an 8-hour shift, ensuring optimal productivity for your business. Key Features: Average Production: Designed to produce up to 200 sealed units per 8-hour shift, meeting the demands of medium-scale operations. Hopper Capacity: Equipped with a spacious 45 KG hopper, minimizing downtime for refills and ensuring continuous operation. Variable Output: Offers a versatile output range of 0-2000 Grammes/min, allowing for precise control over adhesive application based on specific requirements. Five separate heated zones Over temperature: Alarm and cut out One-touch setting for all sealants Constant scrolling display on all zones Standby mode: Protecting the material Calibration programme Timer: Built in Low Temperature Cut Out: Incorporates a low temperature cut out mechanism, Display: Features a user-friendly interface with three display panels, facilitating easy monitoring of machine parameters and operational status. Power Rating: Operates efficiently with a power rating of 10 amps / 2kw, balancing performance and energy consumption effectively. #AdvanceSystems #Hotmelt #HM2000 #GlassSealedUnits #EfficientProduction #SmallMediumUsers #CuttingEdgeSolution #Flexibility #BigMachines #InnovativeTechnology #ImprovedEfficiency #SealedUnitProduction #GlassIndustry #HotMeltTechnology #EnhancedProductivity #SealantApplication #QualityManufacturing #EasyOperation #IndustrialEquipment #GlazingSolutions #SealedUnitMachinery #ModernTechnology #ManufacturingProcess #EfficientSealingSystem #InnovativeDesigns #QualityMaterials #GlassManufacturing #ProductionEfficiency

Regarding the service life of #thermocouples. This is difficult to define because it can vary depending on factors such as sensor #construction, operating conditions, and #maintenance. Generally speaking, if used and maintained properly, thermocouples can last for years or even decades. However, harsher operating conditions or lack of maintenance may shorten its service life. To ensure accurate #temperature #measurements, thermocouples should be inspected regularly and replaced if they show signs of wear or damage.

Moisture measurement with high accuracy and without safety precautions Our newly improved side/center/side microwave measurement technology for moisture, coating, application / add-on and dye pick-up measurement offers several benefits for an even more efficient and comfortable usage: 💡New and easier adjustment of the side heads with improved precision of adjustment at AF 310 💡Improved sensitivity and accuracy by more than 30% 💡Automatic and fast adjustment of measuring range 💡Quick and easy commissioning and maintenance 💡Interfaces: analog (0/4...20 mA), RS485 (Modbus), CAN (option), Profinet (option) 💡Enhanced protection of measuring heads for robust use in even the harshest environmental conditions The non-hazardous microwave measurement technology means that no safety precautions are required, which offers a considerable advantage compared to other contract measurement systems. 👉 For more information and all areas of application, contact us via [email protected]! #pleva #plevasensorsandcontrols #textile #textileindustry #qualityassurance #dyeing #coating #dyepickup #textiledyeing #padder #coating #chemicalsavings #productquality #sensortechnology #sensors #textileexcellence #processoptimization #energyefficiency #measurement #measurementsolutions #textilemachinery #textileinnovation #sustainability #sustainabletextiles

🌟 Boosting Production Efficiency, Ensuring Product Quality! Introducing: Relay Automatic Enclosure Dust Blower 🌟 In the realm of electronic component production, cleanliness and quality are paramount. However, traditional manual dust blowing operations often suffer from low efficiency, making it difficult to ensure the cleanliness and electrical performance of products before and after enclosure. With technology continuously advancing, we present a revolutionary solution: the Relay Automatic Enclosure Dust Blower! 🔹 Automated Dust Removal: Leveraging high-voltage ionization technology, our blower thoroughly removes dust and debris from the surface of products, ensuring the highest cleanliness standards. 🔹 Precision Enclosure: Integrated with an automated control system, our equipment precisely completes the enclosure process after dust blowing, without the need for manual intervention, ensuring consistent product quality. 🔹 Efficient Production: Not only does it improve production efficiency and reduce labor costs, but it also significantly reduces product defect rates, bringing new benefits to your production line. 🔹 Environmental Sustainability: Committed to green production, our equipment adopts energy-saving and environmentally friendly design and technology, saving energy and reducing emissions for your enterprise. Stay ahead of the curve with the Relay Automatic Enclosure Dust Blower, revitalizing your production line and safeguarding the quality of your products! Contact us to learn more details! product link：https://lnkd.in/dsMpCQaa #SmartManufacturing #EfficientProduction #QualityAssurance #IndustrialAutomation #HighTechEquipment #InnovativeTechnology #ProductionEfficiency #EnvironmentalTechnology #EnergyEfficiency #ElectronicsManufacturing #IndustrialEngineering #ModernManufacturing #AutomatedProduction #HighQualityProduction #ProductionLineOptimization #EnterpriseBenefits #GreenProduction #AdvancedTechnology #IndustrialRevolution #SustainableDevelopment 🚀🔧✨

HM 5000 GLASS HOT MELT The Advance Systems Hotmelt HM 5000 is a cutting-edge solution tailored for constant production, offering efficient production capabilities for glass sealed units. With a focus on reliability and performance, this machine is designed to produce up to 350 units within an 8-hour shift, ensuring optimal productivity for your business. Key Features: Average Production: Designed to produce over 350 sealed units per 8-hour shift, meeting the demands of largest scale operations. Hopper Capacity: Equipped with a spacious 200 KG hopper, minimising downtime for refills and ensuring continuous operation. Variable Output: Offers a versatile output range of 0-5000 Grammes/min, allowing for precise control over adhesive application based on specific requirements. Six separate heated zones Over temperature: Alarm and cut out One-touch setting for all sealants Constant scrolling display on all zones Standby mode: Protecting the material Calibration programme Timer: Built in Low Temperature Cut Out: Incorporates a low temperature cut out mechanism, Display: Features a user-friendly interface with three display panels, facilitating easy monitoring of machine parameters and operational status. Power Rating: Operates efficiently with a power rating of 415V 20 amps per phase 4kw balancing performance and energy consumption effectively. #HM5000 #GlassHotMelt #AdvanceSystems #HotmeltMachine #GlassSealedUnits #EfficientProduction #Reliability #Performance #HighProductivity #LargeScaleOperations #HopperCapacity #ContinuousOperation #VariableOutput #AdhesiveApplication #HeatedZones #OverTemperatureAlarm #OneTouchSetting #ScrollingDisplay #StandbyMode #MaterialProtection #CalibrationProgramme #TimerControl