Entering our final week of #NationalSafetyMonth, it is important to remember the dangerous impact that slips, trips and falls can have on every employee within a working environment. According to the National Safety Council (NSC), “In 2022, 865 workers died in falls, and hundreds of thousands were injured badly enough to require days off of work.” These accidents are 100% preventable. When working with construction equipment, be sure to keep in mind the following tips: 1. Make sure you have level ground to set up the equipment. 2. Discuss the task with coworkers and determine what safety equipment is needed for the project. 3. Make sure you are professionally trained in how to use the equipment before beginning the project. 4. Scan the work area for potential hazards before starting the job. Always stay cautious and be mindful of your surroundings and the objects around you that could be dangerous if not handled properly. Remember, your safety is always the top priority! #SlipsTripsFalls #SafetyTips #GemmaPowerSystems #EPC #ElectricalContractors #PowerIndustry
Gemma Power Systems, LLC’s Post
More Relevant Posts
-
Safety is one of the most important aspects when entering construction areas because they may contain potential hazards such as sharp edges on equipment or substances that could harm someone. It’s necessary to remember Safety1st because it can ultimately save lives! For example, it also applies in the workplace, where safety must always come before production. If we were not safe, then there would have been many accidents and possible fatalities at work. #Safety #industry #work #job #equipment #miningsafety #equipcare #perfectindiagroup https://lnkd.in/dbU5jv8E
To view or add a comment, sign in
-
The 2024 Safety Stand-Down is a voluntary event for employers to talk directly to employees about safety. Any workplace can hold a stand-down by taking a break to focus on "Fall Hazards" and reinforcing the importance of "Fall Prevention". Employers of companies not exposed to fall hazards, can also use this opportunity to have a conversation with employees about the other job hazards they face, protective methods, and the company's safety policies and goals. It can also be an opportunity for employees to talk to management about fall and other job hazards they see.
To view or add a comment, sign in
-
Falls from heights are a significant concern in construction because they often result in severe injuries or fatalities. Several factors contribute to this risk: 1. Gravity and Impact: Falls from elevated surfaces involve a direct impact on the ground, leading to more severe consequences compared to some other types of accidents. 2. Work Environment: Construction sites often involve working at heights, such as on scaffolding, ladders, or rooftops. These environments increase the likelihood of falls. 3. Human Factors: Factors like lack of proper training, improper use of equipment, negligence, or inadequate safety measures can contribute to falls. 4. Complexity of Tasks: Construction work often requires complex tasks, making it crucial for workers to navigate various heights. Lack of proper planning or failure to follow safety protocols can lead to accidents. 5. Equipment Issues: Malfunction or improper use of safety equipment, such as harnesses and fall arrest systems, can contribute to falls. Addressing this issue involves implementing stringent safety measures, providing proper training, using reliable safety equipment, and fostering a safety culture within the construction industry. Regular inspections, hazard assessments, and adherence to safety regulations are essential to mitigating the risk of falls from heights. For any fall protection needs from inspections to installations, please contact our height safety department https://lnkd.in/eTebfjUr #heightsafety #fallprotection #fallsprevention #workingatheight #onega #sheqman
To view or add a comment, sign in
-
#workatheight #safetyfirst #safetytips #safetysolutions #fallarrest #ppe #Safetyharnesses are important for several reasons: 1. Fall Protection: Safety harnesses are designed to prevent falls from heights. They distribute the force of a fall across the body, reducing the risk of injury. 2. Personal Protection: They provide a secure attachment point for workers to connect to anchor points, ensuring they stay safely connected to structures or lifelines while working at heights. 3. Compliance: Many industries and workplaces have safety regulations that require the use of safety harnesses when working at heights. Compliance is essential to avoid legal and financial consequences. 4. Reduces Risk: Safety harnesses help reduce the risk of accidents and injuries, making them an essential part of occupational safety programs. 5. Versatility: They can be used in a variety of industries, including construction, mining, manufacturing, and more, making them versatile tools for worker safety. 6. Emergency Situations: In emergency situations, safety harnesses can be used for rescue operations, allowing for safe retrieval of individuals from hazardous areas. 7. Peace of Mind: Wearing a safety harness can provide workers with peace of mind, knowing that they are taking precautions to protect their well-being while working at heights. Overall, safety harnesses are crucial for ensuring the safety and well-being of individuals who work in environments where falls from heights are a potential hazard.⬤
To view or add a comment, sign in
-
-
CSP®, CRSP®, NCSO®, CMIOSH, IDip NEBOSH, MSc. in Safety and Risk Engineering, PMP®, RMP®, FIIRSM, MBA in HSE Leadership, IASP|CSM, ISO Lead Auditor, COR™ Auditor, 6 Sigma practitioner, HACCP certified
🚧 Ensuring Safety: Preventing Falling Objects 🚧 In the fast-paced world of construction, the threat of falling objects is ever-present. It's not just about protecting the equipment—it's about safeguarding lives. Every year, countless accidents occur due to falling objects on construction sites, posing serious risks to workers and bystanders alike. But these incidents are not inevitable. With the right controls in place, we can mitigate these risks and create safer environments for all. Here are some essential controls to prevent falling objects: 1️⃣ Secure Tool Tethers: Implementing tethering systems for tools and equipment ensures they remain securely attached to workers, reducing the risk of accidental drops. 2️⃣ Barricades and Signage: Clearly marked exclusion zones and warning signs alert workers and visitors to potential hazards, helping to minimize the risk of injury from falling objects. 3️⃣ Overhead Protection: Erecting protective structures, such as scaffolding or netting, shields workers below from objects dropped from above. 4️⃣ Regular Inspections: Routine inspections of equipment and structures can identify potential hazards before they lead to accidents, allowing for timely intervention. 5️⃣ Training and Awareness: Proper training equips workers with the knowledge and skills to recognize and mitigate falling object risks, empowering them to take proactive measures for safety. By prioritizing these controls and fostering a culture of safety awareness, we can significantly reduce the incidence of falling object accidents on construction sites. Remember, safety is everyone's responsibility—let's work together to keep each other safe. #FallingObjects #SafetyControls #PreventionIsKey #WorkplaceSafety #SafetyFirst #ConstructionSafety #StaySafe
To view or add a comment, sign in
-
I’ve heard more and more discussion lately around the use of helmets vs hard hats. To me, it seems employers will be best served by getting ahead of this and making the shift to helmets as soon as possible. The last thing any organization needs is to be dealing with a negligence claim and possible lawsuits for failing to use more advanced technology to protect employees. My two cents - it’s likely much cheaper to switch to helmets compared to potential litigation costs.
Ladies and gentlemen, gather 'round as we witness an epic showdown like never before! In the blue corner, weighing in with rugged resilience and unyielding toughness, we have the undisputed champion of construction, the hard hat! But hold onto your seats, folks, because in the red corner, we have the safety sensation, the guardian of caution and protection – the safety helmet! All joking aside, OSHA has just announced that the agency is replacing traditional hard hats used by its employees with more modern safety helmets to protect them better when they are on inspection sites. The agency recommends safety helmets be used by people working in the construction industry and the oil and gas industry; in high-temperature, specialized work, and low-risk environments; performing tasks involving electrical work and working from heights; and when required by regulations or industry standards. OSHA wants employers to make safety and health a core value in their workplaces and is committed to doing the same by leading by example and embracing the evolution of head protection. #naspsafety #PPE #OSHA #safetyprofessional #safetyprofessionals
To view or add a comment, sign in
-
-
Everyone pay Attention:
Ladies and gentlemen, gather 'round as we witness an epic showdown like never before! In the blue corner, weighing in with rugged resilience and unyielding toughness, we have the undisputed champion of construction, the hard hat! But hold onto your seats, folks, because in the red corner, we have the safety sensation, the guardian of caution and protection – the safety helmet! All joking aside, OSHA has just announced that the agency is replacing traditional hard hats used by its employees with more modern safety helmets to protect them better when they are on inspection sites. The agency recommends safety helmets be used by people working in the construction industry and the oil and gas industry; in high-temperature, specialized work, and low-risk environments; performing tasks involving electrical work and working from heights; and when required by regulations or industry standards. OSHA wants employers to make safety and health a core value in their workplaces and is committed to doing the same by leading by example and embracing the evolution of head protection. #naspsafety #PPE #OSHA #safetyprofessional #safetyprofessionals
To view or add a comment, sign in
-
-
Ladies and gentlemen, gather 'round as we witness an epic showdown like never before! In the blue corner, weighing in with rugged resilience and unyielding toughness, we have the undisputed champion of construction, the hard hat! But hold onto your seats, folks, because in the red corner, we have the safety sensation, the guardian of caution and protection – the safety helmet! All joking aside, OSHA has just announced that the agency is replacing traditional hard hats used by its employees with more modern safety helmets to protect them better when they are on inspection sites. The agency recommends safety helmets be used by people working in the construction industry and the oil and gas industry; in high-temperature, specialized work, and low-risk environments; performing tasks involving electrical work and working from heights; and when required by regulations or industry standards. OSHA wants employers to make safety and health a core value in their workplaces and is committed to doing the same by leading by example and embracing the evolution of head protection. #naspsafety #PPE #OSHA #safetyprofessional #safetyprofessionals
To view or add a comment, sign in
-
-
⚠️ Excavation Safety: 5 Essential Tips for a Safer Worksite ⚠️ 1️⃣ Plan and Assess: Careful planning is key! Thoroughly assess the excavation site, identify utilities, and establish a safe zone. 2️⃣ Contact 811: Before you dig! Notifying utility operators to have the lines marked avoids accidental strikes and protect workers. 3️⃣ Protective Systems: Prevent cave-ins! Implement shielding, shoring, or sloping techniques, and ensure proper PPE. 4️⃣ Competent Personnel: Safety first! Assign experienced individuals to monitor and identify hazards throughout the project. 5️⃣ Constant Vigilance: Stay alert! Regularly inspect the site and encourage a safety-focused culture. Remember, safety is everyone's responsibility. Let's dig smart and work safe! 💪🚧 #ExcavationSafety #WorksiteSafety #DigSmartWorkSafe #SafetyFirst #ProtectWorkers #ConstructionSafety #DamagePreventionAcademy #EnergyWorldnet #EWN
To view or add a comment, sign in
-