DesignGyan’s Post

Check out the model here https://lnkd.in/gWr4xv7q

Know about a new CAD tool in every 10 days ! #10daysofCatia #5thday Boomrang made by Anant Gandole in Catia tool Click the link in the comments. 👋 Follow us for more CAD content! #learningeveryday

Know about a new CAD tool in every 10 days ! #10daysofCatia #8thday Surfacing_model made by  Prathamesh Khadse in Catia tool Click the link in the comments. 👋 Follow us for more CAD content! #learningeveryday

Know about a new CAD tool in every 10 days ! #10daysofCatia #4thday C-Clamp Assembly made by Prathamesh Khadse in Catia tool Click the link in the comments. 👋 Follow us for more CAD content! #learningeveryday

In this course I learnt to create high quality freeform surfaces with different surface analysis in CATIA V5 such as connect checker to check the continuity in the surface, highlight and distance analysis, feature modelling, harmonization different types of blends and much more about good surfacing techniques. I also learnt about different considerations for making A class surface and creating blends in free form surfaces.

Know about a new CAD tool in every 10 days ! #10daysofCAD #5thday Car seat made by  Shashank Kaithwas in Creo Click the link in the comments. 👋 Follow us for more CAD content! #learningeveryday

Excited to share the key components of the Radial Engine Assembly in Catia- V5: - 01 MASTER ROD - 02 LINK PIN - 03 MASTER ROD BEARING - 04 PISTON - 05 CONNECTING ROD - 06 ROD BUSH UPPER - 07 PISTON PIN - 08 ROD BUSH LOWER - 09 PISTON PIN PLUG - 10 PISTON RING Through  In the top-down assembly design approach, components are created inside the Assembly Design workbench. Therefore, there is no need to create separate part files for the components. This design approach is completely different from the bottom-up design approach. Here you have to start the product file first and thereafter all the components will be created one by one. Note that even though the components are created inside the product file, they are saved as individual part files, which can be separately opened later. Adopting the top-down assembly design approach gives the user a distinctive advantage of using the geometry of one component to define the geometry of the other component. In these cases, the construction and assembly takes place simultaneously. As a result, the user can view the development of the product in real time. This design approach is highly preferred while working on a conceptual design or a tool design where a reference of the previously created parts is required to develop a new part. #Engineering #CatiaV5 #RadialEngine #AssemblyComponents

Did you know you can now adjust simplified beam lattices using the Warp feature in Creo?

Low Degree Curves in Creo 11 give you greater control of the Style feature, allowing curves with a degree of 2 or 1 while working in Control Point mode. This gives you improved curves in Style and greater control over your low degree curves.

Know about a new CAD tool in every 10 days ! #10daysofCAD #10thday Surfacing model made by Prasad Magi in CATIA Click the link in the comments. 👋 Follow us for more CAD content! #learningeveryday