ACCEL COMPRESSION INC’s Post

In the fluid systems industry, it is now a standard practice to incorporate two consecutive block valves for safety when releasing pressure from a live system. Employing a double block valve sequence is considered one of the most secure methods to achieve a state of zero pressure and zero flow. Learn more at: https://buff.ly/3UPhxxm #FluidSystems #SafetyStandard #swageloktips #swagelokproducts

When operating Enclosed Vapour Combustors in a reduced spacing application, we need to ensure any vent gas that may be in the area is pulled into the combustion chamber through a properly tested Air Intake Flame Arrestor. Air Intake Flame Arrestors will cool and extinguish any flame as it tries to pass back through on its way to its source, such as a tank truck, storage tank, leaking flange, etc. The results of not using Air Intake Flame Arrestors can be catastrophic. Find out more about Rush Industries' Enclosed Vapour Combustors and Air Intake Flame Arrestors: bit.ly/CRC-AIFAANN #EmissionReduction #ReducedSpacing #EnclosedCombustors

Just a Pinch LPV series is a 2-port solenoid in normally closed or normally open pinch valve for fluid control. It has a fully encased body that is highly resistant to contamination and corrosion. Find out more at https://ow.ly/BehJ50QhW14

Just a Pinch LPV series is a 2-port solenoid in normally closed or normally open pinch valve for fluid control. It has a fully encased body that is highly resistant to contamination and corrosion. Find out more at https://ow.ly/BehJ50QhW14

Spray with confidence with New Reactor 3 series. Have we ever noticed the viscosity of Part A and Part B of hybrid Polyurea’s are no more the same. In most of the cases differences is more than 400 mPa.s in viscosity . With impingement gun used at the end it’s imperative to balance the pressure by adjusting with viscosity of the part A and B. With independent heated hoses and simplified temperature control in R3 it becomes more easy to balance the pressure. #polyurea #Pufoam #Gracoreactor https://lnkd.in/gVkFtcU2

An electrostatic precipitator aka ESP is an electro-mechanical tool. The device filters out particles such as fumes, fly ash and suspended dirt from the gas stream before releasing them out of the chimney. The key principle of the devices is to use a very high voltage negative charged electrostatic force.

New article: Corrosion resistance of NbCrFeNiCoMoX coating applied by laser cladding on GTD-111 superalloy: Application of gas turbine blade https://lnkd.in/dPaZFuHd

Pressure transmitters renown for reliability and high accuracy. The Kobold PAD and PAS series of pressure transmitters provide reliable and accurate measurement of absolute, gauge and differential pressure. Approved for explosion -proof areas like Ex db, Ex tb and Ex ia and suitable for the most difficult applications. Read more - https://buff.ly/49rbyUz Contact JSG to find out more - https://buff.ly/3Q214Cm #instrumentationandcontrol #pressuremeasurement #levelmeasurement #flowmeasurement #temperaturemonitoring #processmanagement

Pressure transmitters renown for reliability and high accuracy. The Kobold PAD and PAS series of pressure transmitters provide reliable and accurate measurement of absolute, gauge and differential pressure. Approved for explosion -proof areas like Ex db, Ex tb and Ex ia and suitable for the most difficult applications. Read more - https://lnkd.in/g6Tk4gAU Contact JSG to find out more - https://buff.ly/3Q214Cm #instrumentationandcontrol #pressuremeasurement #levelmeasurement #flowmeasurement #temperaturemonitoring #processmanagement