Drinking Water Utilities

For Water Infrastructure: Supplied Water

Water sources such as rivers and lakes, which provide clean water,
are important elements that support people's lives. Highly accurate measuring instruments are required for managing the quality of drinking water.
Based on the technology it has developed through industrial water quality instruments, HORIBA provides a wide range of measurement systems, including a lineup of more highly sensitive water quality analyzers for supplied water,
and systems for monitoring water quality, which offer a package of measuring instruments for sites that require environmental monitoring.

In this application note, the authors present a novel, rapid method for identifying low concentrations of oil contamination in process water using Fluorescence Excitation Emission Matrix (FEEM) combined with Parallel Factor Analysis (PARAFAC). This method allows for quick detection and analysis of oil contaminants in process water, offering a practical solution for industries where timely intervention is crucial.

This application note describes a rapid, sensitive nondestructive disinfection byproducts (DBP) prediction method using patented simultaneous Absorbance-Transmittance and fluorescence Excitation-Emission Matrix (A-TEEM) spectroscopy.

This application note describes the use of the Aqualog for monitoring regulated Dissolved Organic Matter (DOM) and disinfection by-product issues for drinking water treatment.

This study describes the application of simultaneous absorbance and fluorescence excitation-emission matrix (EEM) analysis for the purpose of identification and classification of freshwater planktonic algal species.

Water travels through the environment carrying dissolved organic matter (DOM), made up of various chemical compounds, which have entered the water column from many sources.

The concern of water contamination from nanoplastics (≤ 1 µm) is a study receiving close scrutiny from FDA and EPA alike. Nanoparticles can gain access through inhalation, ingestion, or dermal exposure and have greater cellular uptake than those bigger in size. Nanoparticles subsequently pose a greater impact on health.

The analysis of Br, Cl, and I is possible with ICP-AES at low limits of detection due to an adaptation of the instrument. This adaptation doesn't affect the determination of other elements and will generally improve analytical performance for any elemental lines below 200 nm for example, Pb at 168 nm.

Global drinking water sources remain prone to carcinogenic petroleum product contaminations due to lack of detection capacity at or before treatment plant intake. The Aqualog A-TEEM method provides a reliable optical detection of these compounds at low quantities discriminating from the highly absorbing and fluorescent backgrounds of natural Dissolved Organic Matter (DOM) components.

제품 문의

HORIBA제품의 자세한 정보를 원하시면, 아래의 양식에 내용을 입력을 부탁드립니다.

이름

성 *

회사/단체 *

우편번호 *

주소

국가/지역 *

도

이메일 *

연락처/휴대폰

HORIBA Department

문의 내용 *

개인 정보 제출 시, 당사의 개인 정보 보호 정책을 읽고 동의해 주시기 바랍니다.

* 는 필수입력항목입니다.

Related Products

LAQUA 21 CFR Part 11 Software

Ammonia Electrode Filling Solution

Chloride ion electrode (combination) 6560S-10C

9425-10C (for general-purpose use)

Reference Electrode 2060A-10T

Standard type

Aqualog Datastream

For Instant Water Quality Reports

Calcium Electrode Filling Solution

Chloride Electrode Filling Solution

Reference Electrode 2565A-10T

Double-junciton type

ICP Software

9300-10D ORP Electrode

5402 DO Electrode Tip

2.50 mmol/L Calcium Ion Standard Solution Y052H

Nitrate Electrode Filling Solution

1.25 mmol/L Calcium Ion Standard Solution Y052L

Potassium Electrode Filling Solution

Powder for ORP Standard Solution 160-51

Powder for ORP Standard Solution 160-22

Conductivity Standard Solution Kit

3551-10D Conductivity Cell (Submersible Type)

Chloride ion electrode tip 7660S

3552-10D Conductivity Cell (Submersible Type)

Fluoride ion electrode (combination) 6561S-10C

84 uS/cm Conductivity Standard Solution

NIST pH Buffer Solution Kit

7541 DO Electrode Tip

3553-10D Conductivity Cell (Submersible Type)

Fluoride ion electrode tip 7661S

1413 uS/cm Conductivity Standard Solution

USA pH Buffer Solution Kit

9551-20D DO Electrode

9382-10D Conductivity Cell (Submersible Type)

Ammonia electrode (combination) 5002S-10C

100 mg/L Ammonium Ion Standard Solution

pH 1.68 Buffer Solution

9551-100D DO Electrode

3561-10D Conductivity Cell (Flow Type)

1000 mg/L Ammonium Ion Standard Solution

12.88 mS/cm Conductivity Standard Solution

Ammonia electrode membrane caps

5401 DO Electrode Tip

3562-10D Conductivity Cell (Flow Type)

Nitrate ion electrode (combination) 6581S-10C

100 mg/L Calcium Ion Standard Solution

pH 4.01 Buffer Solution

111.8 mS/cm Conductivity Standard Solution

3573-10C Conductivity Cell (Flow Type)

1000 mg/L Calcium Ion Standard Solution

Nitrate ion electrode tip 7681S

3574-10C Conductivity Cell (Flow Type)

Potassium ion electrode (combination) 6582S-10C

100 mg/L Chloride Ion Standard Solution

1000 mg/L Chloride Ion Standard Solution

Potassium ion electrode tip 7682S

pH 6.86 Buffer Solution

Calcium ion electrode (combination) 6583S-10C

100 mg/L Fluoride Ion Standard Solution

pH 7.00 Buffer Solution

1000 mg/L Fluoride Ion Standard Solution

Calcium ion electrode tip 7683S

pH 9.18 Buffer Solution

100 mg/L Nitrate Ion Standard Solution

pH 10.01 Buffer Solution

Cyanide ion electrode 8001-10C

1000 mg/L Nitrate Ion Standard Solution

pH 12.46 Buffer Solution

Ammonia Ionic Strength Adjustor

Calcium Ionic Strength Adjustor

Chloride Ionic Strength Adjustor

Fluoride Ionic Strength Adjustor

Nitrate Ionic Strength Adjustor

9480-10C Long ToupH electrode (for large containers and long test tubes)

Electrode protector cap (3 pcs/pack)

9481-10C Sleeve ToupH electrode (for viscous and non-aqueous samples)

Chloride ion electrode 8002-10C

Potassium Ionic Strength Adjustor

9418-10C Micro ToupH electrode (for low-volume samples)

9415-10C Standard ToupH electrode (for general laboratory application)

Sulfide ion electrode 8003-10C

Printer (for GLP/GMP compliance)

Iodide ion electrode 8004-10C

Powder for pH Standard Solution 150-4

Bromide ion electrode 8005-10C

Copper ion electrode 8006-10C

Field-installation type water quality measuring instruments

Cadmium ion electrode 8007-10C

Digital simulator X-51

Lead ion electrode 8008-10C

9618S-10D Micro ToupH electrode (for low-volume samples)

Digital simulator X-52

Thiocyanate ion electrode 8009-10C

9680S-10D Long ToupH electrode (for large containers and long tubes)

Fluoride ion electrode 8010-10C

9651-10D (for field testing)

Silver ion electrode 8011-10C

9681S-10D Sleeve ToupH electrode (for viscous and non-aqueous samples)

Sodium ion electrode 1512A-10C

AC adapter cable set

Nitrate ion electrode 8201-10C

LCD protection sheet

9625-10D (for general-purpose use)

Potassium ion electrode 8202-10C

Protection cover

Calcium ion electrode 8203-10C

Electrode hook for D-70 Series, ES-71, and OM-71

9630-10D (for low conductivity samples)

FA-70A Integrated Electrode Stand

9631-10D (for hydrofluoric acid or HF samples)

9632-10D (for strong alkali samples)

FA-70S Electrode stand (adjustable type)

DP-50S Electrode stand

6367-10D (for high accuracy pH measurement)

DP-70S Electrode Stand

6252-10D (for food samples)

Glass Electrode 1066A-10C

Standard type

Glass Electrode 1076A-10C

For measurement of low-conductivity water and non-aqueous solvents.

6069-10C (for very slender test tubes)

6261-10C (for flat surface measurement)