Particle Analysis of Chocolate

Food

HORIBA provides solutions for many aspects of the Food and Beverage industry. From food safety to quality assurance, our systems and instruments can provide you with the analytical data and precision control you need.

Applications

Products

Webinars

Videos

Browse Application Notes

This application note summarizes a groundbreaking study in the world of food safety and conservation that delves into the aggregation-induced emission (AIE) phenomenon of nonconjugated rhodamine derivatives, sheds light on the underlying mechanism driving their luminescent properties and unlocks their potential in food spoilage detection.

Rice mainly consists of starch, but it also contains inorganic nutrients, and it has been reported that different inorganic elements have different distributions in a rice grain. We carried out elemental distribution imaging of inorganic nutrients with the HORIBA XGT-9500 X-ray analytical microscope. The result successfully visualized that P and K were accumulated in specific areas of a rice grain, while S and Zn were uniformly distributed within a rice grain.

In this application note, a method for accurately predicting the amounts of major constituents of kava root from spectroscopic absorbance and fluorescence measurements made with the HORIBA Aqualog® and the A-TEEM technique is presented.

A wide range of elements are present in plants. Some elements exist to play important roles as plant nutrients or enzymes, and some elements accumulate unexpectedly due to environmental pollution. While it is important to understand the bulk concentrations of individual elements from a nutritional and ecotoxicological perspective, the distribution of elements is also important for a better understanding of the mechanisms of metabolism and uptake in plants.

We introduced a fast and non-destructive imaging method for inorganic minerals on a multivitamin supplement tablet containing various essential minerals to body functions. We used the HORIBA XGT-9500 X-ray Analytical Microscope for the imaging, and we could visualize the distribution of the key inorganic elements on the tablet less than 20 minutes even though the concentration of the elements are tens of mg or less per tablet.

Saffron is a target for adulteration due to its high price. Other compounds can be added, such as minerals, oils or synthetic colorants. The two in one Duetta spectrometer was used to rapidly acquire Excitation Emission spectra for different saffron samples from different suppliers.

The use of time‐resolved fluorescence has expanded as the relative cost of instrumentation has decreased in recent years. One area where this is especially true is in the food industry, where time‐resolved fluorescence has been applied in the characterization of food stuffs as well as aspects related to food safety and degradation.

Individual rice grains are analyzed by micro-XRF to examine the effect of grain polishing. The concentration of mineral elements found on a grain can be related to the degree of polish.

This application note introduces foreign matter analysis in food products using the XGT 9500. There are three analyses as follows: Foreign particles on an oily salami, foreign matter inside a laminated ham and sausage, and a fly found in a drink product.

Edible insects have received attention as a possible solution as a supplemental source to reduce food insecurity because of their nutritional benefits such as protein, fat, and minerals. Micro-XRF can be used to understand the elemental distributions in insects non-destructively. In this application note, we carried out elemental map imaging on edible crickets using a HORIBA XGT-9500 X-ray analytical microscope and revealed the rich source of zinc in their jaws.

Raman analysis of a 50 μm section of a wheat grain kernel has allowed spectral features corresponding to starch, lipid and proteins to be identified. The distribution of these components on the micron scale has been studied using a Raman mapped image. Decomposition of the Amide I band allows a correlation between protein structures and grain hardness.

Flavor emulsions are concentrates used for food products. The flavor could be a natural product or a synthesized material, emulsified to make delivery easier. Analysis would require the concentrated emulsion to be diluted in to water. Additional surfactant may be required to stabilize the emulsion upon dilution.

Bean paste is a milled bean product containing large sections of the seed coat along with varying sizes of ground cotyledons, the fleshy section of the bean. Particle size of these components has a direct effect on mouth feel, flavor, and consistency of the final product. To ensure a consistent product, a company should have some procedure to monitor and control size from batch to batch and facility to facility.

Flour is the product of milled grains. Typically the distribution is wide and the size varies depending on the desired final product. Flour particles have a tendency to swell when run wet. The solution is to use ethanol and a sequence program to automate the process as much as possible. When flours are run dry they will closely match wet data without the threat of the particles swelling.

Particle size determination is an important parameter for any particulate system and it plays a vital role in the quality of diverse products manufactured by the food industry as well. In this study, particle size of wheat flour is measured by laser diffraction technology that has emerged as the most important and effective technique in the world of particle size analysis.

In this Application Note, we will focus on the importance of monitoring particle size and distribution range throughout two different processing technologies used to improve shelf-life and efficacy of CBD products.

Mayonnaise is one of the most popular condiments world-wide and is prepared in many different ways. As health conscious consumers begin to scrutinize the ingredients on nutrition labels, there is growing pressure on manufacturers to create a mayonnaise product with lower cholesterol, lower calories, and healthier oil content while maintaining the consistent taste and mouthfeel of regular mayonnaise.

This study focuses on the critical particle diameter of dry sugar granules as particle diameter is an indicator of: Flowability, Dissolution and mixing, and Powder uniformity.

Foods we love rely on flavorings (or flavorants) to enhance their taste. Flavorants can reduce the costs of food processing while allowing a healthier diet. For maximum impact, particle size is important. Chefs and food scientists look beyond the name of the flavor and consider how it behaves during cooking and manufacturing. Much of this depends on particle size.

Quality control is an essential part of the sugar production. Sugar particle size specifications affect product dissolution rate, flowability, dust generation, and directly affects applications such as the spread of cookie dough or compaction strength of a chewable tablet. Traditionally, sugar manufacturers have chosen to use sieving analysis due to its low initial cost and its seemingly simple operating procedure. In this study, the LA-960V2’s ability to rapidly analyze particle separation and the particle size of powdered sugar at its de-agglomerated state is demonstrated.

Many food products exist in particulate form ranging from powders to emulsions, suspensions and pellets. The size distribution of the particulates can affect the taste, appearance, stability, processability, and functionality of the final product.

The chocolate production process today is a marriage between technology and craftsmanship. Generally, the presence of particles above 30 µm leads to poor mouth-feel. It is perceived as gritty. Meanwhile, particles below 20 µm feels silky and smooth. Below 30 µm, 2-3 µm of a particle size difference can be detected by the tongue as a different level of smoothness. Therefore, monitoring, standardizing and setting specifications for particle size testing is a critical and necessary measure for quality control across chocolate plants.

Back to top.

Explore our Products

Aqualog - Water Treatment Plant Analyzer

Automated Organic Analysis & Early Warning Sentinel

LAQUA 21 CFR Part 11 Software

Ammonia Electrode Filling Solution

Chloride ion electrode (combination) 6560S-10C

9425-10C (for general-purpose use)

Reference Electrode 2060A-10T

Standard type

Calcium ion sensor S051

TDM - The Time-Domain Monochromator

Ultra Fast TCSPC Lifetime Fluorometer

Calcium Electrode Filling Solution

Steady State and Lifetime Benchtop Spectrofluorometer

Chloride Electrode Filling Solution

Reference Electrode 2565A-10T

Double-junciton type

9300-10D ORP Electrode

5402 DO Electrode Tip

Temperature Compensation Electrode 4163-10T

2.50 mmol/L Calcium Ion Standard Solution Y052H

Nitrate Electrode Filling Solution

1.25 mmol/L Calcium Ion Standard Solution Y052L

Aqualog - A-TEEM Industrial QC/QA Analyzer

A Simple, Fast, “Column Free” Molecular Fingerprinting Technology

Potassium Electrode Filling Solution

Powder for ORP Standard Solution 160-51

Powder for ORP Standard Solution 160-22

Large Flow Liquid Source Vaporization Control System

Salt electrode S021

Conductivity Standard Solution Kit

LAQUAtwin pH-33

Pocket Water Quality Meters

Sodium ion electrode S022

Field-installation type electric conductivity meter (conductivity meter)

Potassium Ion Sensor S030

TCSPC Lifetime Kit

LAQUAtwin pH-22

Pocket Water Quality Meters

Capacitance Manometer

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

Nitrate ion electrode S040

TCSPC Lifetime Fluorometer

Fluorescence and Absorbance Spectrometer

Panel-mount type conductivity meter

3551-10D Conductivity Cell (Submersible Type)

LAQUAtwin pH-11

Pocket Water Quality Meters

Calcium Ion Sensor S050

Chloride ion electrode tip 7660S

3552-10D Conductivity Cell (Submersible Type)

TCSPC/MCS Fluorescence Lifetime System

Fluoride ion electrode (combination) 6561S-10C

84 uS/cm Conductivity Standard Solution

NIST pH Buffer Solution Kit

7541 DO Electrode Tip

3553-10D Conductivity Cell (Submersible Type)

Panel-mount type conductivity meter (conductivity meter)

Fluoride ion electrode tip 7661S

1413 uS/cm Conductivity Standard Solution

USA pH Buffer Solution Kit

9551-20D DO Electrode

9382-10D Conductivity Cell (Submersible Type)

Ammonia electrode (combination) 5002S-10C

100 mg/L Ammonium Ion Standard Solution

pH 1.68 Buffer Solution

9551-100D DO Electrode

3561-10D Conductivity Cell (Flow Type)

1000 mg/L Ammonium Ion Standard Solution

12.88 mS/cm Conductivity Standard Solution

Ammonia electrode membrane caps

5401 DO Electrode Tip

3562-10D Conductivity Cell (Flow Type)

Panel-mount type conductivity meter (conductivity meter)

Nitrate ion electrode (combination) 6581S-10C

100 mg/L Calcium Ion Standard Solution

pH 4.01 Buffer Solution

111.8 mS/cm Conductivity Standard Solution

3573-10C Conductivity Cell (Flow Type)

Field-installation type electrical conductivity meter (conductivity meter)

1000 mg/L Calcium Ion Standard Solution

Nitrate ion electrode tip 7681S

LAQUAtwin Na-11

Pocket Water Quality Meters

3574-10C Conductivity Cell (Flow Type)

Potassium ion electrode (combination) 6582S-10C

100 mg/L Chloride Ion Standard Solution

1000 mg/L Chloride Ion Standard Solution

Potassium ion electrode tip 7682S

LAQUAtwin Salt-22

Pocket Water Quality Meters

pH 6.86 Buffer Solution

Calcium ion electrode (combination) 6583S-10C

100 mg/L Fluoride Ion Standard Solution

pH 7.00 Buffer Solution

LAQUAtwin Salt-11

Pocket Water Quality Meters

Field-installation type electric conductivity meter

1000 mg/L Fluoride Ion Standard Solution

Calcium ion electrode tip 7683S

pH 9.18 Buffer Solution

LAQUAtwin EC-33

Pocket Water Quality Meters

100 mg/L Nitrate Ion Standard Solution

pH 10.01 Buffer Solution

Laser Scattering Particle Size Distribution Analyzer

Cyanide ion electrode 8001-10C

1000 mg/L Nitrate Ion Standard Solution

LAQUAtwin EC-22

Pocket Water Quality Meters

pH 12.46 Buffer Solution

LAQUAtwin EC-11

Pocket Water Quality Meters

pH Standard Solution 100-2

Ammonia Ionic Strength Adjustor

pH Standard Solution 100-4

Calcium Ionic Strength Adjustor

pH Standard Solution 100-7

Chloride Ionic Strength Adjustor

Benchtop Water Quality Meters

pH Standard Solution 100-9

Handheld Water Quality Meters

Fluoride Ionic Strength Adjustor

pH Standard Solution 100-10

Nanopartica Series Instruments

Nitrate Ionic Strength Adjustor

9480-10C Long ToupH electrode (for large containers and long test tubes)

Electrode protector cap (3 pcs/pack)

Sanitary Conductivity Sensor (Ferrule Clamp type) FES-210L

Insertion sensor type for wide-range conductivity meter HE-960HI

9481-10C Sleeve ToupH electrode (for viscous and non-aqueous samples)

Condensed pH Standard Solution 110-4

Chloride ion electrode 8002-10C

Potassium Ionic Strength Adjustor

9418-10C Micro ToupH electrode (for low-volume samples)

9415-10C Standard ToupH electrode (for general laboratory application)

Benchtop Water Quality Meters

Condensed pH Standard Solution 110-7

Sulfide ion electrode 8003-10C

Printer (for GLP/GMP compliance)

Condensed pH Standard Solution 110-10

Iodide ion electrode 8004-10C

Powder for pH Standard Solution 150-4

Bromide ion electrode 8005-10C

Copper ion electrode 8006-10C

9615S-10D Standard ToupH electrode (for general laboratory application)

Field-installation type water quality measuring instruments

Powder for pH Standard Solution 150-7

Cadmium ion electrode 8007-10C

Digital simulator X-51

Powder for pH Standard Solution 150-9

Lead ion electrode 8008-10C

9618S-10D Micro ToupH electrode (for low-volume samples)

Digital simulator X-52

Thiocyanate ion electrode 8009-10C

Benchtop Water Quality Meters

9680S-10D Long ToupH electrode (for large containers and long tubes)

Fluoride ion electrode 8010-10C

9651-10D (for field testing)

Silver ion electrode 8011-10C

9681S-10D Sleeve ToupH electrode (for viscous and non-aqueous samples)

Benchtop Water Quality Meters

Sodium ion electrode 1512A-10C

AC adapter cable set

Nitrate ion electrode 8201-10C

LCD protection sheet

9625-10D (for general-purpose use)

Handheld Water Quality Meters

Potassium ion electrode 8202-10C

Handheld Water Quality Meters

Benchtop Water Quality Meters

Protection cover

Handheld pH/ORP/Dissolved Oxygen/Temperature Meter

Calcium ion electrode 8203-10C

Handheld pH/ORP/Dissolved Oxygen/Temperature Meter

Benchtop Water Quality Meters

Electrode hook for D-70 Series, ES-71, and OM-71

Handheld pH/ORP/Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

Handheld pH/ORP/Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

Handheld Conductivity/Resistivity/Salinity/Total Dissolved Solids/Temperature Meter

Benchtop Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

9630-10D (for low conductivity samples)

Handheld Conductivity/Resistivity/Salinity/Total Dissolved Solids/Temperature Meter

FA-70A Integrated Electrode Stand

Benchtop pH/ORP/Ion/Conductivity/Resistivity/Total Dissolved Solids/Salinity/Temperature Meter

Handheld Dissolved Oxygen/Temperature Meter

LF-F/LV-F Series

Digital Liquid Mass Flow Meters / Controllers

9631-10D (for hydrofluoric acid or HF samples)

Handheld Dissolved Oxygen/Temperature Meter

Benchtop pH/ORP/Ion/Temperature Meter

Handheld pH/ORP/Temperature Meter

9632-10D (for strong alkali samples)

FA-70S Electrode stand (adjustable type)

Handheld pH/ORP/Temperature Meter

Benchtop pH/ORP/Ion/Temperature Meter

DP-50S Electrode stand

6367-10D (for high accuracy pH measurement)

DP-70S Electrode Stand

6252-10D (for food samples)

SEC-Z500X Series

Multi Range/Multi Gas Digital Mass Flow Controller

Glass Electrode 1066A-10C

Standard type

Glass Electrode 1076A-10C

For measurement of low-conductivity water and non-aqueous solvents.

6069-10C (for very slender test tubes)

6261-10C (for flat surface measurement)

Back to top.

Watch Webinars and Videos

Fast auto sampling. Auto fast sampling. Auto sampling, fast

Two tools for the entirely seamless, automated Aqualog package

A-TEEM™ stands for simultaneous Absorbance, Transmission, and Fluorescence Excitation-Emission-Matrix (EEMs) Acquisition.

A-TEEM for quick & complete molecular fingerprints

Back to top.

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

Prénom

Nom *

Société ou établissement *

Code postal *

Ville

Pays/Région *

Etat

Adresse e-mail *

Téléphone

Service HORIBA

Votre message *

J'ai pris connaissance et accepté la politique de confidentialité HORIBA

* These fields are mandatory.