VIP全球网络研讨会

In this introductory webinar for Partica CENTRIFUGE Centrifugal Nanoparticle Analyzer, Dr. Mike Pohl will discuss the innovations made that allow a long-established sedimentation technique to extend its measurement down to 10 nanometers and up to 40 microns. The talk will dive into practical case studies to demonstrate CENTRIFUGE’s unique ability to deconvolute individual peaks of very close multimodal particle mixtures. Various applications will also be presented. A Q&A session will follow.

From Material Sciences to Life Sciences, from Environment to Earth Sciences, Raman microscopy can now easily reach unknown worlds. The brand new, award-winning LabRAM Soleil™ and its built-in intuitive software have been developed to allow the characterization of all types of samples.

This presentation will provide exciting results in the areas of wine and spirits phenolics, pharmaceutical analysis, olive oil adulteration, water and trace PAH oil analysis.

A method for quantitation of fulvic fraction (FF) and sulphonated humic acid (SHA) in commercial humic products using A-TEEM technology combined with PARAFAC, PCA and PLS analyses will be presented.

The webinar will be an overview of the A-TEEM technique and some specific applications for which information is gained relevant to pharmaceutical development and process analysis. Addressing such applications requires a set of tools for A-TEEM spectroscopy to help adopt the technique into labs that require Good Manufacturing Practices (GMP) and are also focused on efficiency and ease-of-use.

We show that the A-TEEM’s ability to acquire absorbance, transmittance and excitation-emission matrices simultaneously along with the ability to correct for inner filter effects provides a more quantitative method.

This presentation will focus on the principles of enhanced darkfield optics and optical hyperspectral imaging. It will also include example applications in areas including nanotoxicology, nanomedicine and SERS related research.

In this webinar, Dr. Anderson Bonon and Dr. Matthieu Chausseau will use laser diffraction, image analysis, X-ray fluorescence and elemental analysis (C/S, O/N and H) to demonstrate effective control of the raw material as well as recycled powder. Case studies obtained from various powders commonly used in processes will be discussed with a Q&A session to follow.

In this webinar, guest speaker Matt Creedon will discuss particle size analysis of ceramics and the particular challenge of determining a suitable refractive index. Topics to be discussed include: Ceramic Formulations, Importance of particle size, Problems in particle sizing, and Approaches to index determination.

We will show how Glow Discharge Optical Emission Spectroscopy (GD-OES) can perform advanced materials characterization for all these materials within minutes and provide fast answers to scientists working on the development of these materials or for manufacturing process control.

This joint webinar of PureNanoTech and HORIBA, will introduce the latest innovation in nanobubble technology, validated using an improved nanoparticle tracking analysis (NTA) and explore different bubble generation techniques, providing insights into nanobubbles’ fundamental principles and unique characteristics.

This webinar will give a general overview of spectroscopic ellipsometry, including a description of the how the technique works, the modeling process, the information obtained, and the different types of ellipsometers available for measurement with pros and cons of each type.

In this webinar, the technique of particle correlated Raman spectroscopy (PCRS) will be presented, and will be illustrated by representative application examples from fields including forensics, pharmaceuticals/cosmetics, and microplastics.

In this webinar, Drs. Jeff Bodycomb and Sergey Mamedov talk about particle analysis and spectroscopic techniques (Raman and XRF) for evaluating these important components that power 21st century technology. They describe a range of techniques and give examples of their practical application.

The need for fluorescent bioprobes has exploded in the last decades in the Life Sciences and Medical domains for applications such as bioimaging, lab-on-chip diagnostics, drug development or cell sorting.

This webinar will provide a general overview of Raman spectroscopy and HORIBA Scientific’s MacroRAM Raman spectrometer. Select application examples and measurement demonstrations will be presented for pharmaceutical, microplastic, and polymer samples.

This presentation will show the spectra from bulk material and small pieces and a comparative analysis of the concentration profiles.

In this presentation, we will show several micro-Raman applications: • Polymorphs identification • Crystallographic analysis of Orpiment and comparison of XRD to Raman data • Crystalline lattice deformation in Zircon • Studying of fluid and gas inclusions • Reconstruction of 3D images of different titanium polymorphs and their distribution in solid inclusions

This presentation will provide exciting new results in the areas of wine chemistry, olive oil chemistry and other food and natural products including dietary supplements.

This presentation will detail on how the A-TEEM features provides true, traceable molecular fingerprints, as well as precise quantification for compounds of interest.

At NeoVentures we have developed aptamers for several viral proteins including but not limited to the spike and nucleoprotein of SARS-CoV-2 and theP24 coat protein of HIV.

Experts in multiparticulate applications from Colorcon and Innopharma Technology will discuss how computational design and PAT can help build more robust formulations, predict multiparticulate performance, and accelerate development by reducing traditional iterative trial and testing practices in development. Discover how the best practices and technology presented here will accelerate formulation development and improve quality outcomes for your multiparticulate formulations.

Surface area is an important physical property that influences the reactivity, dissolution, catalysis, and separation of materials. The surface area often must be carefully engineered and measured to optimize specific functions. This webinar will explain BET theory, Sample preparation, Calculating specific surface area from gas adsorption on solid surfaces, and Troubleshooting.

In this webinar we will describe the different techniques and their interest for Life Science and Pharma applications, then we will illustrate their potential through different applications on bacteria and protein analysis.

While seemingly simple, blending can provide many surprising challenges. Each type of process; including dry blending, powder blending with added liquids, or the blending of micro ingredients, contains unique issues. In this webinar, Dr. Willie Hendrickson of AVEKA, Inc. will include an overview of segregation during blending, types of mixers used, and a number of practical examples of blending issues and challenges.

In this presentation we describe a novel, Multispectral Advanced Nanoparticle Tracking Analysis (MANTA) system for particle visualization and routine determination of particle concentrations and their sizes. These capabilities combined in one instrument, enable first-of-their-kind measurements of particle kinetic processes which will also be demonstrated.

In this webinar, Dr. Willie Hendrickson will take a closer look into the fundamentals of spray drying, how the industry uses engineering solutions to help with consistency and outline the gaps in our understanding of processing with food-grade and industrial materials.

As the requirements for analyses evolve, analysts need to run more and more complex samples, such as how to analyze impurities in graphite without any digestion needed for fabrication of rechargeable batteries? This, and other examples of analyses where high resolution is needed, will be discussed during this webinar. See how easily you can manage these complex analyses using our ICP-OES.

This presentation will demonstrate how the combination of different bulk measurements with depth profile analysis will provide fully quantified depth profile (concentration vs depth).

In this webinar, we will highlight how Photoluminescence and Raman microscopies can address semiconductor challenges. We will also show how the combination of micro-spectroscopies with AFM (Atomic Force Microscopy) can provide nano resolution and deeper understanding of these structures.

In this joint webinar, Adam Gilmore and Jeffrey Bodycomb will discuss characterizing single-walled carbon nanotubes using fluorescence and particle analysis.

For years, Lithium-ion batteries have been of great interest as the rechargeable counterpart to traditional Lithium batteries.

by Prof. Ji-Xin Cheng, Moustakas Chair Professor of Photonics and Optoelectronics, Professor of BME, ECE, MSE, Chemistry, Physics, Boston University, in partnership with Wiley Analytical Science Virtual Conference 2021

In this webinar, Thibault Brulé and Jocelyne Marciano will demonstrate how the combination of these two unique techniques can fully characterize the organic and inorganic layout over samples such as tablets, rocks, or pollutant particles on filter.

The A-TEEM Compliance Package is now available from HORIBA and enables A-TEEM to be used in a GMP environment. Discussion points will be around both the pharmaceutical applications of A-TEEM and the details of the compliance package for GMP labs.

Drinking water treatment faces challenges both due to infectious microorganisms in raw water and varying levels of dissolved organic carbon (DOC) from decomposed plant material from watershed sources. Disinfecting water, often with chlorine that reacts with DOC, can lead to carcinogenic disinfection byproducts (DBPs).

With this webcast, discover how correlated TERS, TEPL & SPM measurements are possible using an AFM-Raman instrument.

This webinar will introduce the concept of combining an Enhanced Darkfield with Hyperspectral imaging on a Raman microscope.

This webinar will present the history, structure, and current research program of the International Fine Particle Research Institute (IFPRI). We will also look at the benefits of IFPRI membership including access to over 700 papers and reviews, focused workshops on particle science and technology areas, and a new emphasis on continuing education in particle science and technology.

We present the Duetta, a 2-in-1 absorbance and fluorescence spectrometer for various ways to characterize novel fluorescence probes. This includes absorbance and fluorescence spectral detection for the characterization of novel molecules in relation to temperature, concentration, pH, solvent, and viscosity, among other physical parameters.

In order to lead to a better understanding of the electrical transport properties of PSCs, Dr. Arthur Marronnier, will present a comparison between the linear response (DFPT) approach of Density Functional Theory (DFT) and spectroscopic ellipsometry measurements on the hybrid CH3NH3PbI3 perovskite material.

This presentation will detail these new features and explore some special NIR enhancements for Rare Earth studies.

Physical characterization is central to the development of small molecule pharmaceutics, but focusing on particle size can sometimes be right or wrong. Our guest speaker, Dr. Mick Hurrey of SteadyMed Therapeutics shares his experience on solid oral dosage characterization.

Dynamic light scattering (DLS) is a common technique to determine size and zeta potential of colloidal particles in a suspension. In this webinar, Prof. Iryna Zenyuk and Prantik Saha will discuss how DLS helps prepare catalyst inks with high electrochemical performance required for optimal design of these systems, and thus, help build a zero-carbon emissions society.

This presentation reports on patented A-TEEM spectroscopy which primarily uses fluorescence excitation emission matrix data that are corrected for inner-filter effects (IFE) to eliminate spectral distortion.

As fluorescence EEM user you could be interested in this webinar which focuses on 3D fluorescence combined with simultaneous absorbance-transmittance spectroscopy.

Emulsion behavior is often determined by droplet size. Evaluation of droplet size by laser scattering is a time-tested method for checking product quality or performance. Surface charge is often a factor in predicting emulsion stability and can be measured by scattering as well. Whether you're trying to create emulsions for food, pharmaceutical, or other purposes or trying to break emulsions for water treatment, this webinar is for you.

Carbon, Sulfur, Oxygen, Nitrogen and Hydrogen have a huge impact on the quality and properties of materials. They affect hardness, weldability, ductility, strength, and corrosion resistance to name a few.

Nanotechnology was seeded by the idea of versatile material synthesis by direct manipulationand assembly of atoms or elementary entities. It has unraveled nanosize-related enhanced oreven unique mechanical, catalytic, electrical, and optical properties; and has led to anexponential growth of new engineered nanomaterials and their applications in microelectronics, medicine, energy, etc.

In this webinar, Julie Nguyen will share her view on the particle science behind the emerging food trend and buzzwords. She'll be using laser diffraction and dynamic imaging techniques to explore how physical properties of food ingredients effect product quality, stability, flavor while reviewing available FDA guidance for food manufacturers.

After more than 10 years, HORIBA has released a new EMGA series of analyzers: The EMGA Pro and EMGA Pro/Expert! In a world where helium consumption is becoming an economical challenge, these new ONH analyzers couples frugality and cost savings, guaranteeing a faster analysis, an easier maintenance and a user-friendly interface.

SignatureSPM, the first multimodal characterization system built on an automated Atomic Force Microscope platform and integrating a Raman/Photoluminescence spectrometer, enables true colocalized measurements of physical and chemical properties. Raman spectroscopy, within this colocalized approach, provides essential data about the molecular structures and compositions, including potential contaminants at microscale. Simultaneously, AFM contributes information about the topographical and mechanical properties of the samples, offering detailed data into their surface textures, surface adhesion, roughness, and stiffness at nanoscale.

In this talk, we discuss the topic of EV isolation with a focus on the most popular method of size exclusion chromatography and the challenges in characterizing their size distribution. Additionally, Ya-Hong Xie from UCLA will share his perspective of how this line of research could lead to deepening our understanding of exosomal biology pertaining to their diagnostic and therapeutic promises.

Research on exosomes and other forms of extracellular vesicles (EVs) have rapidly expanded over the last two decades. These lipid-enclosed, nanoscale messengers are released from cells packed with diverse cargo and can travel long distances to modify the function of target cells. Learn more about what exosomes are, how researchers study them, and what challenges remain.

Dr. Nicole Comfort of Columbia University discusses the approach her team uses for comparing the efficiency of two previously published CNS-EV isolation methods. The use of blood-isolated CNS-EVs are biomarkers of metal exposure and disease progression in amyotrophic lateral sclerosis (ALS). In this webinar, learn about Dr. Comfort’s exciting research and the important role of nanoparticle tracking analysis (NTA).

Professor Dan Lark gives a talk through the WebEVTalk series focusing on their findings in extracellular vesicles (EVs) secretion between skeletal muscle and white adipose tissue. This study uses transgenic fluorescent reporter mice and various analytical techniques including multi-laser Nanoparticle Tracking Analysis to collectively demonstrate improved understanding of EV secretion by different tissues and their biodistribution.

Are you tired of slow and expensive surface area measurements slowing down your production or research? Join us for a webinar introducing HORIBA's all-new SA-9650 dynamic surface area analyzer. This innovative instrument utilizes flowing gas to dramatically accelerate analysis times, providing you with fast and reliable results.

The presentation, entitled, “Fast Characterization of nm Thin to Thick Coatings using Pulsed-RF Glow Discharge Optical Emission Spectrometry,” will show this technique’s ability to characterize both conductive and non-conductive layers and coatings from nm to 100 microns thickness.

This presentation summarizes exciting new results including accurate quantification of phenolic and anthocyanin compounds, tannins, oak and smoke volatiles and glycoconjugates, as well as pH, sulfites and other basic chemistry parameters in a single scan.

We are proud to introduce our latest Forensics Light sources – HandScope LASER which integrates our family of unique Forensics Light Sources.

Fabrication of commercial integrated circuits depends critically on the physical and chemical properties of the abrasive slurry particles used to polish silicon wafer surfaces via chemical-mechanical planarization. The particle size distribution of the abrasive particles is a key factor in the CMP process. In this presentation, the use of fluorescence correlation spectroscopy in conjunction with particle tracking using the Viewsizer 3000 is described.

This webinar covers RUVIS fundamentals, how and why RUVIS works and operation of both analog and digital RUVIS devices.

Fluid bed drying is a process by which particles are fluidized and dried. For the material to become fluidized, the particulates are placed under conditions that cause it to behave like a fluid. In this webinar, Willie Hendrickson, Founder and CEO of the AVEKA Group and President of IFPRI, will discuss in detail the advantages of fluid bed drying and what instances this technique should be used over other drying processes.

We will present several examples to highlight the capabilities of the fluorescence A-TEEM method, a novel approach which combines UV/Vis with fluorescence EEM spectroscopy. The benefit of this approach is the ability to provide robust and rapid spectroscopic characterization of vaccine components and vaccine formulations, samples that are extremely challenging to traditional spectroscopies, such as Raman and NIR.

In this webinar, see how much HORIBA contributes to the growth of the industry by supporting the development of cutting-edge materials based on the latest analysis systems and application development.

This webinar will introduce the unique concept and key features of ViewSizer3000, an innovative Multispectral Advanced Nanoparticle Tracking Analyzer.

Forensic Light Sources are important tools to aid in evidence detection both at the crime scene and in the laboratory.

This webinar will cover a brief light source fundamentals review, proper wavelength and filter/goggle combinations.

In this webinar, Dr. Jeff Bodycomb introduces, compares, and contrasts the three main techniques for nanoparticle analysis: Dynamic Light Scattering (DLS), Laser Diffraction, and Nanoparticle Tracking Analysis (NTA), including the latest advances. He includes applications and information to help you think about the best way to get the answers you need.

See examples of macroscopic and microscopic Raman and X-ray fluorescence spectroscopy for various applications in forensic science, including the identification and characterization of pharmaceutical products, paint pigments and gemstones.

Nanobubbles in water exhibit many appealing characteristics, such as a long residence time of bubbles in water due to their low buoyancy and stability against coalesces, collapse or burst. Long retention times in water potentially enhance chemical reactions and mass transfer in processes such as ozonation or aeration. This presentation will give an overview of the common generation processes of nanobubbles and their respective principles.

Surface charge on the particle is typically discussed in terms of zeta potential; the potential at the shear plane. Determining the effect of suspension properties on zeta potential allows deliberate design of suspensions and is a critical tool to manipulating nanoparticle behavior. In other words, suspension stability can be effectively manipulated for our benefit.

Centrifugal sedimentation technique are gaining attention as an evaluation tool for materials study field especially nanomaterials. In this talk, we discuss the several case study by centrifugal nanoparticle analyzer Parica CENTRIFUGE covered the application of CMP slurry, battery materials and so on.

Join Dr. Kevin Dahl of Particlese LLC and Dr. Linda Kidder of HORIBA Scientific provide tips and alternative solutions for better vaccine development and quality. They will discuss the application of multi-laser nanoparticle analysis (NTA) in determining vaccine degradation and total particle count. They will also present a new analytical approach, fluorescence A-TEEM method for rapid screening of similar but different vaccine final formulations.

This webinar introduces the fundamentals of TERS through the history of near-field spectroscopic optics. From the great idea of Synge over 90 years ago to the technical progress of scanning probe microscopy, the history of near-field optics crosses the emerging plasmonics field and the discovery of the amplification of the Raman signal by Van Duyne.

This webinar will introduce the plastic recycling markets requirements and challenges related to new packaging materials and how some newtechnologies based on spectroscopic analysis, or with Artificial intelligence, canhelp to sort better, faster, and contribute in a healthier environment.

In this webinar, Dr. Jeff Bodycomb of HORIBA Scientific discusses particle analysis of ceramic particles, including electronic materials and common oxides. He will cover the basic principles of analysis, practical methods for obtaining good data, and example data.

Obtaining a very good Raman spectrum or image is not always very easy. Many parameters must be considered to get the ideal result. During this webinar we will describe the impact of each acquisition parameter and demonstrate how they can be easily optimized, especially in LabSpec6. Thus, Raman spectra and Raman maps acquisitions will become a child’s play for you.

Join Dr. Willie Hendrickson as he discusses the use of multiple characterization techniques to enhance process understanding. Practical examples will include materials such as ceramics, glasses, polymers, food ingredients, and carbon blacks as they are used in the specialty chemical, food, animal feed, personal care, or automotive industries.

Glenn Evers, international titanium dioxide consultant and former DuPont TiO2 research scientist & inventor will reveal pigment properties needed for the most valuable next generation paint. In this webinar, you will learn: basic properties of white TiO2 pigment for paints, particle size properties of resins and pigments to optimize water-based paints, how to achieve a high ROI using a particle size instrument, and why one-coat paints have room for improvement.

Raman microscopy couples both submicron-scale spatial resolution and high spectral resolution. Thus, achieving the best performances is dependent on a good calibration in both spatial and spectral dimensions. During this webinar, we detailed the different calibration routines applied on Raman microscopy to achieve ideal measurements while remaining compliant with regulations. We also explained how these routines work and why they are important to consider.

Raman microscopy provides both molecular and morphological information of the analyzed sample. However, sometimes it is not enough to fully understand a physical or chemical process. That's why the Raman information has to be coupled with complementary information. During this webinar, we will present the different solutions existing to combine Raman with other microscopy techniques in this aim, like SEM, AFM, or all other microscopy techniques.

Join us and listen to the webinar to understand how the new CN-300 measures your polydisperse particles in a highly concentrated medium with high resolution over a wide measurement range.

Dr. Kuba Tatarkiewicz will examine methods for particle size distributions as obtained by particle tracking analysis, fluorescence, as well as micro-sedimentation. Methods for comparison of particle size distributions will be presented and explained in practical terms.

During this webinar, we will explain impact of processing on Raman spectra and the solutions for Raman image analysis, including multivariate analyzes.

Dr. Jeff Bodycomb discusses the process HORIBA uses to select the best possible refractive index. This information is valuable for anyone using any type of laser diffraction particle size analyzer regardless of manufacturer or model.

Raman microscopy is more and more becoming a standard method in many application domains. This transforms Raman microscopy from a high-end technique to one that is widely used. Consequently, it has to come with tips-and-tricks, but also with dedicated tools to support these different applications. These supporting tools can be accessories or software dedicated apps. During this webinar, we detailed the tools and accessories supporting Raman microscopy for specific applications.

Quantitative imaging techniques, such as FRET-FLIM, FCS and FCCS, and RICS are powerful tools to monitor the dynamics and interactions of proteins in live cells.

izabela possui graduação em Engenharia de Alimentos pela Universidade Federal de Viçosa, mestrado e doutorado em Alimentos e Nutrição pela Universidade Estadual de Campinas. Vem desenvolvendo pesquisas em microencapsulação desde 2008, voltadas a aplicação em produtos alimentícios, no Centro de Tecnologia de Cereais e Chocolates, no Instituto de Tecnologia de Alimentos com foco na proteção e liberação controlada de substâncias diversas.

The ViewSizer® 3000 offers the ability to visualize nanoparticle colloids without requiring calibration standards or knowledge of any particle material properties, such as refractive index. It offers the user an unprecedented ability to count and size highly polydispersed samples, such as milk, sea water, or blood plasma.

Handling powders and bulk solids is an essential element of many manufacturing processes. During these processes, key considerations are controlling and predicting the particle size and shape data, as collected in situ. In this webinar, Darren McHugh will provide a demonstration of the Eyecon2 real-time imaging particle size analyzer, then review in-depth how the results compare to sieve and other correlation methods.

This webinar will take a closer look into the fundamentals of solids processing, how the industry uses engineering solutions to help with consistency and outline the gaps in our understanding of industrial processing. Practical examples featuring blending, size separation, drying and particle formation using polymer, food and ceramic materials will be used to illustrate these challenges.

The first generation of resistive memory based of phase-change materials (Phase Change Memory or PCM) is already in production for standalone market and is being qualified for the automotive market, which is highly demanding in terms of reliability standards.

The demand of plastic recycling is increasing drastically since few years as only a tiny proportion of them are collected and then recycled. Nowadays, plastics that can be recycled are issued of different polymers type such as PE, PVC, PET, ... During this webinar, HORIBA will introduce some new technologies or solutions that can be considered for polymers applications and how they could contribute in a “greener” environment.

Drs. Katherine Y. Bell, (Director of Water Strategy), and Martha J.M. Wells (Chemical Consultant to Brown and Caldwell) will co-present this webinar. Kati will provide an overview of water treatment at Brown and Caldwell and what services are offered. Martha will provide the fundamentals of the technologies applied and a discussion of our current understanding of organic matter aggregation in water.

Equipped with only qualitative knowledge of particle shape, the particle analyst can resolve this inherent ambiguity and use laser diffraction to obtain quantitative information (such as aspect ratio) about non-spherical particles. This webinar explains the origin of this effect, describes how to interpret PSD data in such cases, and demonstrates several practical applications for measurements of crystals, bacteria, and clays.

During this webinar, we will cover the InverTau specifications and features, demonstrate the EzTime Image software platform’s ease-of-use and the FLIMera’s remarkable FLIM-video capabilities for capturing dynamic-FLIM and quickly scanning samples for regions of interest.

Here, Dr. Graham Fairhurst introduces the NEW Mageleka MagnoMeter XRS spectrometer, a bench-top NMR instrument, and shows how it can provide particle characterization insights that are not otherwise available from traditional techniques such as particle sizing, zeta potential, and rheology.

This webinar will give an introduction to AFM technique, instrumentation, and describe basic operating principles behind AFM.

In this webinar, we present a flexible and modular CL system that can be added to most common SEM instruments.

Dr. Jeff Bodycomb introduces dynamic light scattering (DLS), a fast, repeatable, and accurate size determination for nanoparticles and large molecules. Here Jeff introduces and reviews the technique while also discussing method development, application results, data interpretation, and comparison with other nanoparticle analysis techniques.

This presentation will begin with the fundamental building blocks for this technique and illustrate the basics so that scientists and technicians who are new to this method or even those who are well versed can better familiarize themselves with the basics. Then, this presentation will primarily focus upon the calculation of surface area from gas adsorption raw data using the BET (Brunauer, Emmett and Teller) method.

Analyzing particles over a size range of 10's of nm to millimeters? Looking for a high throughput particle sizing technique to support development or manufacturing QA? Need a simple method to ensure you can focus on your problem, not the finer points of scattering theory? Laser diffraction has evolved to meet all of these requirements. Join Dr. Jeff Bodycomb as he introduces laser diffraction to get you started or as a refresher.

Analyzing particles over a size range of 10's of nm to millimeters? Looking for a high throughput particle sizing technique to support development or manufacturing QA? Need a simple method to ensure you can focus on your problem, not the finer points of scattering theory? Laser diffraction has evolved to meet all of these requirements. Join HORIBA session and we will introduce laser diffraction to get you started or as a refresher.

In this webinar you will learn about the fundamentals of X-ray fluorescence spectroscopy and instrumentation as well as the application of micro-XRF for characterization of batteries and fuel cells

In this webinar, you will learn basic principles of applied Raman imaging and the importance of spectral resolution to image rendering. The effects of chemical bonding, strain and crystallite size will be addressed and we will show you how to image these characteristics.

In this webinar, we present a novel concept that adds various spectroscopies to any optical microscope – the so-called Standard Microscope Spectroscopy Systems or SMS.

In many cases such as catalysis, particle surface area is more interesting than particle size. Specific surface area (surface area per unit mass of material) can be determined over the range of about 0.01 to 2,000 square meters per gram. This webinar provides an introduction to core surface area analysis concepts.

In this webinar we will introduce you to the various subcategories of VUV spectroscopy, the various challenges involved in implementing these type of spectroscopy and the array of related products available from HORIBA for VUV applications.

Representative application examples of the use of XRF spectroscopy in industry, art, and forensics will also be shown and discussed.

Do you need help finding the best method to grind or classify your product to the correct particle size and shape? With constantly advancing technology demands, many are looking for answers on how to create unique particles. Let us introduce you to jet milling and air classification as means to manipulate particle size and shape.

The focus of this presentation will be on jet milling and air classification, starting with a description of the processes. Comparison examples to other grinding processes with different types of materials and their grinding characteristics, as well as examples showing how jet milling and air classification can be optimized for particle size and range, will be featured.

In this webinar, we cover the important factors to consider when developing a method with your LA-960 laser diffraction system. Topics covered include choosing appropriate accessories, selecting the best dispersing medium, assessing the effect of circulation pump speed, and evaluating the impact of using different imaginary refractive index values.

Choosing an appropriate particle measurement approach is often more thought-provoking than it seems. For laser diffraction, there are many dispersion accessories and instrument options. In this webinar, Dr. Jeff Bodycomb will present a range of options that will lead to easy and successful analyses and the considerations behind each choice.

Sample preparation and instrument setup are crucial parts of obtaining good data. Method development is thinking through and testing sample preparation and instrument setup to ensure optimal results. That is, variations due to sample preparation should be minimized. Questions include: Should the sample be run in suspension or as a dry powder? What salts or surfactants are needed for the suspension? How much energy should be applied and how?

During this webinar we will show how combining Raman and µ-XRF characterization with this co-localization tool generates valuable information for a range of applications.

During this webinar, we will demonstrate the use of a two-in-one fluorescence and absorbance spectrometer for highly sensitive and rapid A-TEEM molecular fingerprinting, applied to cell culture media component analysis and vaccine production endpoint QC/QA.

Raman microscopy can have the reputation of being difficult to handle. But with all our recent developments...it has become much easier for non-experts to access!

In this webinar, we will discuss some of the key features of Lumetta and show how this compact spectrograph is a good solution for your spectroscopy needs that require performance in a compact footprint.

The circular economy of food contact materials requires a thorough review of risk management: construction of an observatory, reference materials, rapid identification and measurements, generalization of migration modeling for unknown substances, evaluation of mixed substances, safe design for recycling, emerging risks due to aging, etc. The presentation provides an update on research priorities.

Dr. Willie Hendrickson will explain the development process for particles with specific attributes that can cause problems during production. His talk will focus on alternative processing methods, the importance of understanding the materials being used, and what can happen when you do not understand the functional properties that you are designing for.

We will introduce the GD-OES technique and features that help to overcome limitations and drawbacks: direct depth measurement without sample preparation, ability to characterize inorganic and organic layers, pulsed RF for the characterization of fragile materials, depth profiling from the first nanometers down to 150 µm in minutes.

In this webinar, Jeff Bodycomb will discuss measuring the IsoElectric Point (IEP), a topic within the area of zeta potential. Additional topics include: What is the Isoelectric Point and why is it important, What is Zeta Potential, How do Surfaces Acquire Charge, How to Measure & Determine Zeta Potential, and Uses and Applications.

Particles or emulsion droplets can be removed from dirty water in a settling pond or tank. The process can be accelerated by adding coagulants. Zeta potential measurements help save (green) money and improve treatment results (for a green environment). Learn how zeta potential measurement helps determine the most effective or economical additives for wastewater processing.

Using a variety of fundamental techniques - plasmas, optics, emission spectrometry, near infrared absorption or XRF, HORIBA proposes a large range of instruments for QC and Applied Research.

Dr. Jeff Bodycomb discusses method development for sizing by dynamic light scattering (DLS) and the SZ-100 Nanoparticle Analyzer. This presentation will be useful for those who use DLS to determine nanoparticle size. Topics to be covered include preparing suspensions, sample filtration (clarification), and particle concentration.

In this webcast, Iddo Pinkas will be describing several recent projects that I have worked on in the not distant past in his lab serving the community of the Weizmann Institute of Science in Israel. These projects focus specifically on the use of micro‐Raman spectroscopy, and span the fields of Biomineralization, Organic Chemistry, Material Science, Environmental Science, Forensic Science and Archeology.

The production of nanoparticles and performing cell disruption are important for many applications. The Microfluidizer® high shear processor offers robust, scalable, cGMP compatible solutions to these challenges. In this webinar, Yang Su of Microfluidics, discusses high shear technology and its application to nanoparticle manufacturing.

Microplastics are nowadays considered ubiquitous contaminants and hence it is not surprising to find their presence even in human organs and tissues.

Microplastics are becoming the 21st century environmental scourge. To control it, more and more regulations are being set in all countries worldwide to monitor the amount of microparticles released in the environment. Thus, some techniques have been identified as reference methods: Pyrolysis GC-MS, Infrared microscopy, and Raman microscopy. This last one provides the best combination of information in both morphological and chemical characterization of each particle down to the micron. During this webinar, we will present how Raman microscopy is becoming the best reference method for microplastics characterization.

Surface area is an important physical property that influences the reactivity, dissolution, catalysis, and separation of materials. The surface area often must be carefully engineered and measured to optimize specific functions. In this webinar, our applications lab will help explain BET theory, the theory behind surface area as well as how to ensure good BET measurements.

Suspensions are two-phase systems implying that an interface exists between the surface of the material and the liquid in which it is dispersed. The bulk properties of any suspension are dependent upon – and controlled by - two fundamental parameters: the extent of the particle-liquid interface which is characterized by, for example, particle size; and the nature of that interface, characterized by, for example, surface charge.

This webinar is the beginning of a series reviewing a number of modern measurement techniques. Dr. Michael Pohl, Vice President of HORIBA Scientific, describes some common ideas in particle characterization along with common questions to ask when selecting a technique. Mike will also give a very brief overview of some modern techniques before subsequent webinars go into detail.

An introduction to basic experimental considerations when choosing laser diffraction for particle size analysis. The presentation will explain what makes laser diffraction a “modern technique.” Both wet and dry case studies will be shown along with brief demonstration videos. Learn about method development, choosing an appropriate refractive index, and understanding the analysis results.

Dynamic light scattering (DLS) is a fast, accurate, and popular method for analyzing nanoparticles and large molecules such as proteins and polymers. In this webinar Dr. Jeff Bodycomb reviews the technique along with comments on method development, application results, and data interpretation.

Multi-laser Nanoparticle Tracking Analysis (NTA) is an advanced patented technology featuring three simultaneously operating lasers with independently adjustable power. In this webinar, Dr. Jeff Bodycomb will offer a broad overview on how multi-laser NTA technique fits into the gene therapy space and where we and our collaborators see the applications going in the near future.

Image analysis can be used for particles with sizes ranging from about a micron to tens of millimeters. Learn about this powerful technology for high resolution particle size and shape measurement. This webinar will cover the basics of the technique and some considerations for obtaining reliable data.

This webinar will explain how HORIBA’s patented Aqualog® with A-TEEM technology can affordably, rapidly and effectively monitor the Biochemical Oxygen Demand (BOD) and membrane fouling components associated with municipal wastewater (WW) and WW recycling membrane processes.

In this webinar, we show the relevance of applying spectroscopic tools such Raman, Photoluminescence, Time-Resolved Photoluminescence and Cathodoluminescence in characterizing key wafer performance parameters for wide bandgap materials.

The simultaneous need to increase performance and reduce cost for today's semiconductor devices means using ever larger wafers, while reducing the size of device structures, thereby increasing their complexity. This combination of requirements means the metrology tools for characterizing such wafers need to evolve to handle such large wafers – up to 300mm in diameter. At the same time, these tools need to increase in sophistication to unravel the complexity in the ever-smaller device structures.

As with all materials, if you work with nanoparticles a few minutes of thought about safety will help you avoid problems later. Join Dr. Dominick Fazarro of the University of Texas at Tyler as he discusses nanoparticle safety. This talk provides a reasonable discussion of the potential hazards of nanoparticles and steps that can be taken to reduce these hazards. This talk is useful for those who work with nanoparticles or manage a facility that handles nanoparticles.

Switching between microscopes has never been so fast and accurate. Sometimes you would like to access a microscope that is not available in your own lab, don’t you? nanoGPS allows fast relocalisation of points of interest between different microscopes and modalities: Raman, SEM, EDX, EBSD, cathodoluminescence, optical microscope, AFMs and more!

This is the first webinar of our Nanoparticle Tracking Analysis series. Here Dr. Jeff Bodycomb introduces the technique in detail along with recent advances in the field. For perspective, Jeff compares NTA with dynamic light scattering (DLS) with practical examples. Join us for this introduction to a (very) small world.

For submicronic particles characterization, different technologies can be of interest. This webinar will focus on three technologies such as Dynamic light scattering, Nanoparticle tracking analysis and Raman microscopy combined with Hyperspectral imaging.

In this webinar, attendees will learn: • How new furnace design reduces maintenance needs for carbon/sulfur analyzers • How resistance furnace design can improve performance for specific applications such as free carbon in ceramics • How unique devices improve performance for oxygen/nitrogen and hydrogen analyzers • How air sensitive samples can be analyzed accurately using oxygen, nitrogen, and hydrogen analyzers.

We will review several applications of GD-OES for metallurgical applications: Coated and hot-rolled steel sheets and how it can be used for zinc coating, thickness measurement, as an inspection tool to prevent issues and for failure analysis; aluminum and aluminum packaging for quality control; drill bits for the characterization of coatings; electroplating for the measurement of the depth on ball grid array package.

EyePASS 3.1 is the latest version of the Eyecon2 image analysis software. It includes several new exciting features for particle size and shape analysis. This webinar will provide an overview of the new features of EyePASS 3.1 and how they can be used to provide more insight into determining particle size and shape.

We propose here an SPR tool adapted to work on-line within the process flow path to quantify for the first time active influenza viral particles produced in cell-based production processes.

Image analysis is intuitively appealing. It reliably characterizes a large number of particles while offering high-resolution size and shape information from microns to millimeters. This introductory webinar features Dr. Günther Crolly of Fritsch and Dr. Jeff Bodycomb of HORIBA who will cover the basics of the dynamic imaging technique and highlight the features of ANALYSETTE 28.

This presentation will focus mainly on Materials Science applications and will include the use of the unique Single Shot Transient Digitizer (SSTD) technique for time-resolved PL in a broad spectral range, including NIR with the use of solid-state detectors.

Duetta is a 2-in-1 scientific instrument offering both fluorescence and absorbance/transmittance spectra, and uses a multichannel CCD detector for fluorescence spectral acquisition.

Ixaka (previously Rexgenero France) is a preclinical stage biotech company developing off-the-shelf and universal chimeric antigen receptor (CAR)-T therapy allowing in vivotargeting and transduction of T-cells.

In this presentation, Dr Arnaud Etcheberry from CNRS-UVSQ, France, will explain his strategy to perform quantitative spectroscopic ellipsometry on CIGS semiconducting thin films.

In this webinar, we will highlight how Photoluminescence and Raman microscopies can address 2D materials challenges. We will also point out how the combination of micro-spectroscopies with AFM can lead to the nano resolution and to deeper understanding of these structures.

In this webinar, Jeff Bodycomb will dicuss how to use zeta potential to optimize and improve our wastewater treatment. Wastewater contains chemical and particulate contaminants that need to be removed for safety, environmental, and aesthetic reasons. This discussion will primarily talk about particulate waste.

In this webinar, guest speaker David Fairhurst will give an overview of the concept, measurement, use and application of zeta potential. Topics to be covered include: How Particle Surfaces Acquire a Charge in Water, Calculation of the Zeta Potential, and Uses and Applications.

In this webinar you will learn how the new Circular Economy Action Plan will influence the design of the future packaging and its waste management and you will gain insights how Raman Spectroscopy/Microscopy can be the perfect tool to address these new challenges.

This webinar will provide an overview of various agglomeration techniques with a consideration of their advantages and disadvantages. The focus will be on fluid bed agglomeration, but extrusion and high-shear agglomeration examples will also be discussed. In addition, different types of materials and their wetting characteristics in correlation to particle size distribution and flowability will serve as examples.

If you're new to particle characterization, this is a webinar just for you! Dr. Jeff Bodycomb will discuss the basics of particles. Why different size definitions will give you different results, various methods used to measure particles and why the method you use matters! This webinar is the first in a series that will give you the knowledge you'll need to be the particle expert in your lab.

Particle size analysis by laser diffraction offers many advantages. The technique is fast, reliable, and can be used for analyzing a wide range of particle sizes. In laser diffraction an optical model is used to convert scattering data into a particle size distribution. This is a great introduction for someone who wants to understand the science behind the measurement.

Modern laser diffraction particle analyzers use particle refractive index to accurately model the behavior of light inside of the particle. However, this presents the analyst with the challenge of choosing the correct value. In this Webinar, Dr. Jeff Bodycomb will discuss: Why do we need a refractive index value, What is refractive index, and How do we choose refractive index values?

Confirming the performance of a particle analyzer is a critical step in ensuring and proving data quality. Join Dr. Jeff Bodycomb as he discusses performance expectations, confirming system performance, and recommended practices. Topics to be discussed include: Calibration vs. Verification, Monodisperse Standards, Polydisperse Standards, and Example Data.

The goal of a particle analysis is to understand the properties of a material, whether it is the size distribution of particles that are manufactured today or the size distribution of particles in the truck that just arrived. In this webinar, Dr. Jeff Bodycomb discusses how to improve data quality by obtaining a representative sample and effectively disperse the sample to remove or prevent agglomerates.

In this webinar, explore how Raman microscopy can be used to identify and characterize microplastics and nanoplastic samples through examples such as hand sanitizer. Plus, gain an overview of the latest HORIBA Scientific solution software: Particle Finder™.

Join Dr. Willie Hendrickson as he discusses several particle processes and characterization methods that can help you to understand and control the final product. Examples include grinding (jet and ball milling), classification (air and simple screening), biomaterial separation and purification, powder coating for flow control, and spray drying.

Emulsions and suspensions are commonly used in pharmaceutical, chemical and consumer products. The pharmaceutical industry, in particular, uses emulsions and suspensions to increase drug efficacy by controlling their particle size and size distribution. This webinar discusses ways to develop a robust homogenization process for making pharmaceutical emulsions by evaluating droplet size distribution.

Dr. Pushpendra Singh discusses the significance of liposome size characteristics in medicine, the challenges present in particle size measurement for heterogeneous size containing formulation (polydisperse), and his recently published results on polydisperse bead and liposome formulations using DLS, conventional NTA, laser diffraction and a novel multispectral NTA measurement techniques.

In this webinar, guest speaker Robert W. Lee from Particle Sciences will talk about particle size determination and raman spectroscopy. Topics to be discussed include: Background on Particle Sciences, Laser Diffraction and Image Analysis Comparison, and Examination of Raman Spectroscopic Data.

Understanding and communicating analysis results are a key part of practical particle characterization. There are a number of specialist terms that are used to precisely describe the result, but these terms can confuse the unwary. This webinar reviews communicating size analysis results and what various terms mean about your sample and specifications.

In this webinar, guest speaker Joost Strasters will discuss particle size method development and validation in support of NanoCrystal Colloidal Dispersion® formulation characterization. Topics to be discussed include: Background: NanoCrystal Colloidal Dispersion® Compositions, Relevance of particle size analysis, and Particle size method development and validation.

In this webinar, guest speaker Daniel Huang of Novartis Pharmaceuticals will discuss particle size analysis for homogenization process development using the LA-950 particle analyzer.

In this webinar, we briefly introduce the phenomenon and technique of photoluminescence spectroscopy as well as its place and range of applicability among other techniques for semiconductor material characterization.

Raman spectroscopy is a good technique for chemical and physical characterization of materials, but suffers from a few limitations like a lack of sensitivity, or its micron scale resolution. Since the 1970s, the coupling of the plasmonic effect with Raman is more and more being used to overcome these limits. This phenomena association results in two enhanced Raman spectroscopies called SERS and TERS, respectively associated to Surface and Tip origins. During this webinar, we present how the coupling of plasmonic and Raman effects results to with SERS and TERS and details some applications.

Piezoelectric ceramics are used widely, including in medical ultrasound devices, inhalers, automotive back-up sensors, aerospace SONAR, BBQ grill ignitors, and humidifiers. Because of their excellent ability to transform electrical energy into mechanical energy and vice versa, these piezoelectric powder compounds are often modified during manufacturing process to suite a variety of applications.

This webinar will discuss how to solve or prevent solids flow problems in storage vessels, measure the fundamental flow properties of powders, and design hoppers, bins, and silos for reliable flow or predict solids flow in existing storage vessels.

(Spanish Webinar) Este webinar tiene como objetivo presentar los fundamentos teóricos del análisis de seguimiento de nanopartículas (NTA), su optimización y su aplicaciones más recientes en la industria e investigación.

In this webinar, we will present the Raman spectra of commonly used metal oxides, NMC and LFP; discuss the effect of the measurement conditions; and explore chemical imaging of the electrodes (active materials, binder, carbon, etc.) You will also discover also how Raman spectroscopy may be applied for quality control (QC) of battery materials processing. We will showcase a complete workflow for analyzing the degree of carbon coating and defects in electrode materials, from sample preparation to Raman acquisition, data analysis to final reporting.  

In this webinar we’ll demonstrate how TERS and TEPL imaging can probe number of nanoscale heterogeneities in 2D crystals: growth related, including lateral and vertical heterostructures, substrate induced, and the morphological heterogeneities that appear (intentionally or not) in the process of exfoliation/ 2D crystal transfer.

More and more, Raman microscopy is being used for a wide variety of applications. As a vibrational spectroscopy, it is mainly compared with Infrared absorption. However, the origins of this Raman effect and the information provided by Raman spectroscopy are different than any other. During this webinar, we will present what the Raman effect is and what kind of information can be obtained based on a Raman spectrum.

With the global energetic transition and the move from thermic to electric cars, the improvement of battery becomes crucial. With that development, the analytical techniques used must be also adapted and developed to understand the physical and chemical processes occurring at the electrodes and electrolyte levels. Thus, Raman microscopy is an ideal method as it provides physical and chemical properties of materials in a non-invasive approach.

In this webinar, we will outline how Raman microscopy can help the pharmaceutical industry throughout the development and production process, from drug discovery to product formulation and passing post-marketed investigation.

In this webinar, join Dr. Massimiliano Rocchia to learn how Raman microscopy can be used to identify and characterize micro and nanoplastic samples, including nanoplastic samples explored via AFM-Raman co-localized analysis, and through nanoGPS navYX SEM-Raman correlative microscopy. This webinar will also provide an overview of HORIBA Scientific solutions (hardware and software) through the analysis of a range of samples.

Understanding the polymerization process, polymer structure, or identifying defects in final products is therefore very important for many laboratories. Raman microscopy is one of the most powerful techniques for obtaining accurate information when it comes to polymers.

In this webinar, Massimiliano Rocchia and Ludivine Fromentoux, HORIBA Scientific, will demonstrate Raman microscopy solutions that enable scientists to obtain full and complete characterization data for all polymer films, from defect analysis to multilayer materials characterization.

Understanding the polymerization process, polymer structure, or identifying defects in final products is therefore very important for many laboratories. Raman microscopy is one of the most powerful techniques for obtaining accurate information when it comes to polymers.

The pharmaceutical product development process involves many different steps and needs in molecular characterization. Thus, understanding API crystal forms, controlling API and excipients interactions or process optimization needs techniques that are able to manage different forms of molecules with a minimal sample preparation. As a result, Raman microscopy is so becoming a standard technique in pharmaceutical laboratories.

In this webinar we will demonstrate why Raman microscopy is the technique of the future for your labs.

Raman microscopy is the combination of the Raman effect and optical microscopy. A Raman microscope is the association of multiple components where each of them is playing a specific role to achieve highly resolved and sensitive measurements. During this webinar, we present the role of each component of a Raman microscope and detail their characteristics and limits.

In this webinar, join Dr. Adam Holland and Dr. Steven Booth to find out more about the advances in hardware and software that have made today’s instrumentation accessible to non-Raman experts.

As the dimensions of semiconductor device architectures shrink, the need for precise control and metrology of the pitch and critical dimension (CD) throughout the different processing steps becomes of paramount importance.

Ear three experts in the field of Raman Spectroscopy discuss Raman, SERS and TERS for 2D materials.

Cannabidiol (CBD) is used in a variety of commercial products, from dietary supplements, to food and beverages and cosmetics. Potency, particle size, and stability all play an important role in the quality control, regulation, and efficacy of CBD/Hemp emulsions. In this webinar, we describe current guidance from FDA, and describe novel, cost effective approaches from HORIBA that address several testing needs of emulsions.

In this webinar you will learn about: The Aqualog's A-TEEM technology that combines UV/Vis absorbance with multidimensional fluorescence. The benefits of using A-TEEM as an alternative to HPLC and GC for the analysis of dietary supplements and other natural products.

In this webinar, we will present a better way to determine cannabinoids in hemp and cannabis, using a combination of UV absorbance-transmission and fluorescence excitation emission matrix spectroscopy, called “A-TEEM.”

This webinar will introduce micro X-ray fluorescence (XRF) technique to quantify Pt distribution at the beginning of life and after aging in fuel cell catalyst layer.

In this webinar, a number of exciting developments in the tip-enhanced Raman spectroscopy (TERS) field will be discussed, including non–trivial excitation wavelength dependence of the gap-mode TERS response of transition metal dichalcogenides (TMDs) on silver that resulted in reconsidering the role of resonance effects and strong optical coupling in TERS and completely unexpected discovery of the normally forbidden Raman bands in TERS spectra of the monolayer h-BN on gold caused by the proximity of TMD monolayer to multiple layers exfoliated on top.

We will provide some insight on the pulsed RF GD-OES technique and show the information it provides on different materials involved in renewable energy: CZTS and CIGS cells, in-operando study of ionic migration in Perovskites, charge/discharge cycles study and failure analysis of lithium battery electrodes and 1D self-aligned TiO2 nanotubes.

This joint webinar of PureNanoTech and HORIBA, will introduce the latest innovation in nanobubble technology, validated using an improved nanoparticle tracking analysis (NTA) and explore different bubble generation techniques, providing insights into nanobubbles’ fundamental principles and unique characteristics.

The transport of sediments by rivers affects the environment in many ways, forming and deforming bedforms, eroding banks, and transporting pollutants to name a few. In this presentation, Dr. Yogi Agrawal, from Sequoia Scientific, will describe new instrumentation and some revealing measurements in Washington State's Cowlitz River.

During this webinar, we will present the Qnami ProteusQ, the first commercial SPM making use of NV quantum technology.

In this presentation, I will illustrate how surface enhanced Raman scattering (SERS) and Raman micro-spectroscopy can be successfully applied to different types of biomedical analysis. Among these, I will focus on the diagnosis and therapy of cancer at the single cell level using folate-based SERS-active nanosensors.

This webinar will introduce such visualization tools concept and will present some examples of applications.

Raman microspectroscopy is an excellent probe of particle composition and particle size. Laser diffraction is a workhorse technique for particle size determination and offers precision and speed. Join Dr. Jeff Bodycomb and Dr. Eunah Lee as they discuss using both of these techniques for analyzing pharmaceutical powders and emulsions and comment on how they fit together.

In this webinar, Dr. Scott Werts, an Associate Professor of Geology at Winthrop University, shares his research focusing on utilizing various aspects of soil chemistry and particle size to investigate many things, such as long-term carbon sequestration in soils using stable isotope trends in soil biological materials, investigating heating in soils from surface fires, and the geomorphology and stable isotope composition of peat cores for paleoclimate studies.

Benefits of nanotechnology depend on the fact that it is possible to tailor processes for different applications to obtain specific characterizations, such as particle size, and thus achieve desired properties. The industry leading Microfluidizer technology is a versatile technology that can address these challenges from lab to production scale volumes.

Since 2015, Atomic Layer Etching (ALE) has a real gain of interest in the semiconductor industry. This process enables to etch a material few monolayers by few monolayers using very controlled alternated steps.

This webinar will focus specifically on applications of spectroscopic ellipsometry in the field of organic electronics.

Standard spontaneous Raman scattering effect is limited by its sensitivity. Different strategies are set in place to improve the sensitivity and the mapping speed based on different physical phenomena. These approaches resulted in the development of Stimulated Raman Spectroscopy (SRS), Coherent Anti-Stokes Raman Spectroscopy (CARS), Resonant Raman spectroscopy, etc., each of which have advantages and limitations. During this webinar, we will present the concept of these different techniques, and discuss their benefits and concerns.

In this webinar, we discuss the spectroscopic capabilities of the SMS system, showing example applications for Raman, Photoluminescence (Fluorescence), Lifetime, Reflectance, Transmittance, Darkfield Scattering, and Electroluminescence.

Microplastic pollution represents a global threat to the environment, and it recently became a topic of increasing concern among media and politics.

Featuring solutions for fluorescence spectroscopy, particle analysis, atomic force microscopy (AFM), Raman and X-Ray fluorescence and dedicated accessories, HORIBA can help you to characterize your fluorescent bioprobes and fully explore their features.

This webcast describes the use of Raman spectroscopy for the characterization of microplastics and nanoplastics (plastic particulates <5 mm), which threaten the environment and potentially human health. An overview of the process of microplastic characterization will be given including a discussion of collection, extraction, detection, and identification methods, with a view to support future legislation and monitoring of microplastic contamination. The necessary high throughput requirements of microplastics analysis will also be addressed through automation of Raman spectral measurements of large quantities of microplastics.

While we all understand that there may be more steps to the successful commercialization of any idea or product, until you actually go to commercialization, the process and the new challenges are potentially confusing. Dr. Willie Hendrickson will share his experience and provide clarity into the mysteries of development (scale-up), commercialization, and the path through the Valley of Death.

Introduction to Tip-enhanced Raman scattering (TERS) imaging. Application of TERS and TEPL imaging to characterization of defects and heterogeneities in 2D materials. TERS Imaging for nanoscale spectroscopic characterization of lateral and vertical heterostructures of 2D materials.

Gain insight into how HORIBA is providing innovative development tools to help accelerate the adoption of hydrogen technologies. These tools allow engineers, researchers, and scientists to address tomorrow’s challenges and to improve performance, quality, and cost. Furthermore, explore HORIBA’s large panel of techniques such as Raman, fluorescence, glow discharge, particle size, ICP, AFM, ellipsometry, C/S and O/N/H analyzers, and impedance spectroscopy.

The presentation will compare evidence detection when using the HandScope Laser to other light source technologies and will briefly cover laser and light source fundamentals and the proper use of goggles.

The basic principles of X-ray fluorescence and instrumentation for micro-XRF spectroscopy will be discussed in this presentation.

The XGT 9500 is the new Micro XRF instrument from HORIBA. X-ray fluorescence (XRF) spectroscopy is a useful tool for the identification of substances and confirming their identity with little or no sample preparation.

The XGT 9500 is the new Micro XRF instrument from HORIBA. X-ray fluorescence (XRF) spectroscopy is a useful tool for the identification of substances and confirming their identity with little or no sample preparation.

This webinar is focused on the use of HORIBA's high-resolutive ICP-OES technique to ensure the determination of major and minor elements in cements.

In a recent report McKinsey predicts that increasing and accelerating regulation, and regulatory complexity, is one of the key factors that will shape the packaging industry in the years to come. This presentation will shine a light on the current and upcoming European packaging legislation, the so-called Brussel effect, and the impact these developments will have on the packaging sector.

This presentation will detail these new features and explore some special NIR enhancements for Rare Earth studies.

In this webinar, you will hear leading imaging experts, Darren McHugh and Girish Mallya, from Innopharma Technology illustrate what Convolutional Neural Network (CNN) is and how it offers users the ability to create a software model that emulates human vision, thereby offering robust, automated, and accurate particle segmentation. You will gain confidence in the CNN-powered image processing for features such as particle size and shape.

To create innovative cosmetic products with proven effects, a sound scientific understanding of the biological matrices (skin, hair, teeth), the development of effective and safe active ingredients, optimised formulations and instrumental performance evaluation are essential. During this webinar, we will demonstrate how HORIBA instruments cover a wide range of cosmetic testing applications.

In this webinar you will receive a full demonstration of the capabilities of the next generation laser diffraction particle size analyzer - the Partica LA-960V2. You will learn to measure ceramic powders, why accuracy is important, and see a hands-on demo direct from the HORIBA Applications Lab.

Joshua Gammon, from the University of Maryland, will present how locally controlled release vaccines demonstrate an enhanced immune response in mice and how this platform may be applied to therapeutic cancer vaccinations. If you're in the pharmaceutical industry, you'll want to hear more about this ground breaking research.

The capability to measure critical quality attributes (CQA) such as particle size in real time reveals their functional relationships with the critical process parameters (CPP). The Eyecon2™ offers a true non-product contact, a real-time imaging system that can be used with dry and wet bulk solid processing equipment affording a digital maturity competitive edge.

See how AFM, Glow Discharge, Spectroscopic Ellipsometry, Raman, CathodoLuminescence and XRF combine to provide a multidimensional information on Surfaces and Interfaces of a large range of materials. This introduction will show the range of techniques available at Horiba and present on a few applications the complementary « point of view » they offer.

This webinar is an introduction to particle size analysis for cosmetics applications. Chris Harrison of H Squared Industries (in partnership with EVIO Labs) includes a brief overview of particle size analysis and its role in product stability, effectiveness, and acceptance. We will discuss the impact of particle size and size distribution on product quality, CBD/non-CBD emulsions, and the role in cosmetics going forward.

Embark on an exciting journey into the world of nanobubbles, exploring their unique properties and growing significance across various scientific and industrial fields. Join us for an insightful exploration of nanobubbles and their role in shaping the future of agriculture.

The LA-960V2 laser diffraction particle size analyzer advances scientific knowledge for tomorrow's world through intuitive software, unique accessories, and high performance. The NEW "V2" can easily measure nanoparticles (10 nm) to 5,000 µm in less than 60 seconds with accurate, reproducible results. In addition, by adding the Imaging Unit Accessory, you can see your particles in real time when running the wet system.

In this talk, we will show how quantum sensing enables us to measure magnetic fields that have never been measurable before. We will provide an overview of the different magnetic imaging modalities of ProteusQ and put this in context of cutting-edge materials science research.

In this webinar, we show results from a multimodal microspectroscopy system from HORIBA for semiconductor characterization. The so-called SMS system is a modular and flexible system capable of accommodating up to seven different spectroscopies including Raman, Photoluminescence, Time-Resolved Photoluminescence (Lifetime), Reflectance and Transmittance, etc.

(Spanish Webinar) La medición de tamaño de partícula por difracción láser estática debe ser validada, en la industria farmacéutica según ICH Q2(R1), tomada como referencia y armonizada por USP-EP-JP. Esa guía fue reabierta para incluir los conceptos de ciclo de vida y aptitud para propósito. Esta exposición ilustra la aplicación de estos conceptos.

In this webinar, we present a novel concept that adds various spectroscopies on any optical microscope – the so-called Standard Microscope Spectroscopy Systems or SMS.

In this webinar, previously given at a Royal Society of Chemistry (RSC) and the National Physical Laboratory (NPL) symposium in the UK, Dr. Jan "Kuba" Tatarkiewicz will discuss the influence of various experimental parameters determined by different methods to measure the concentration of particles in colloids, especially in poly-dispersed and poly-material samples.

Raman microscopy is an increasingly commonly used technique in analytical labs. However, only few manufacturers can provide high quality instruments that make an appropriate balance between flexibility and ease of use. Several key performance characteristics need to be considered when deciding what makes a good Raman microscope. In this webinar we will demonstrate, how the various instrument characteristics impact on what makes a good Raman microscope.

Optical microscopy is very common technique for visualization and characterization at the micron scale. Many modalities exist to highlight different features. However, the chemical information is almost always missing. Raman spectroscopy is a complementary technique that can provide chemical information about the sample. During this webinar, we presented how these different microscopy modalities, combined with Raman spectroscopy, make Raman microscopy so powerful.

In this webinar, Materials Science and Engineering (MSE) graduate students, Michelle Katz and Tiffany Tang will demonstrate with case studies how other orthogonal methods such as optical microscopy, scanning electron microscopy and X-ray diffraction help them cross-validate their particle size and size distribution.

This webinar will highlight the latest features of PrintQuest 3, including automatic processing of ten-print cards, searching slaps/plain impressions, simplified latent prints encoding with possibility of fully automatic (lights-out) process and search, facial recognition, and much more.

A number of micro-XRF applications including glass and sand analysis, and counterfeit pharmaceutical and consumer products will be presented.

In this webinar we will first review and discuss the importance of the iso-electric point of metal-oxide polishing agents and the role of slurry pH and more.