General Spectrometer Specifications* | |
---|---|
Spectral Coverage | 200 - 1050 nm with double-blazed 365 l/mm grating, 190 – 850 nm with 477 l/mm grating, ≤ 400 – ≥ 800 nm with 582 l/mm grating |
Spectral Resolution | 2 nm for 365 l/mm grating, 1 nm for 477 l/mm grating, 0.8 nm for 582 l/mm grating (25 μm slit for all) |
Average Spectral Dispersion | 30.9 nm/mm for 365 l/mm grating, 23.7 nm/mm for 477 l/mm grating, |
Focal Length | 70 mm |
Options | Selection of high grade sensors: CMOS, B.I. CCD, PDA Input port: SMA, FC, free space, custom input |
F/# | ~ F/3.8 |
Wavelength Accuracy | <0.25 nm (using multi-area wavelength calibration) |
Stray Light | < 0.1% |
Software | LabVIEW™ acquisition software for initial evaluation (DLLs provided for software integration) |
Detector Options and Specifications | |||
---|---|---|---|
Linear front illuminated CMOS sensor with high speed and UV extension | Linear back-illuminated CCD with large active area with high sensitivity | ||
Sensor Type | Hamamatsu CMOS linear image sensor S11639 with active pixel structure and global e-shutter | Hamamatsu CCD sensor S11071 with high spectral acquisition speed | Hamamatsu CCD sensor S10420 with high dynamic range |
Sensor Format | 2048 x 1 pixels | 2048 x 70 pixels, shorter version available on request | 2048 x 70 pixels, shorter version available on request |
Active Area | 28.7 x 0.2 mm | 28.7 x 1 mm | 28.7 x 1 mm |
Pixel Size | 14 x 200 μm | 14 x 14 μm | 14 x 14 μm |
QE | > 60% for 450 - 750 nm | ||
Full Well Capacity | 100,000 e¯ (typical) 80,000 e¯ (minimum) | >240,000 e¯ (typical) >175,000 e¯ (minimum) | >375,000 e¯ (high FW mode) |
Readout Noise | 16 e¯ (typical) 20 e¯ (maximum) | 35 e¯ (typical) 45 e¯ (maximum) | 50 e¯ (typical) & 75 e¯ maximum) in high full well mode |
Maximum Spectral Rate | 1400 spectra/s and higher | 770 spectra/s | 223 spectra/s |
ADC | 16-bit | 16-bit | 16-bit |
Dynamic Range (FW/RN) | 6250:1 (typical) | 6800:1 (typical) | 7500:1 (high FW mode) (typical) |
Non-linearity | <0.1% (corrected) | <0.4% (corrected) | <0.4% (corrected) |
Dark Current (@25° C) | 375 e¯/pixel/s (typical) 500 e¯/pixel/s (maximum) | 50 e¯/pixel/s (typical) 500 e¯/pixel/s (maximum) | 50 e¯/pixel/s (typical) 500 e¯/pixel/s (maximum) |
Communication | USB 2 | ||
Environmental Conditions | Operating temperature 15° C to 45° C ambient Relative humidity <70% (non-condensing); Storage temperature -20° C to 60° C | ||
Power Requirements | Through USB 2 | Y Cable (5 VDC) |
Other detector options, such as CMOS-PDAs with passive pixel structure and full well up to 1Ge- available.
Linear CMOS-PDA Options (other sensors available upon request) | ||
---|---|---|
Sensor type | S1012X Series (High Performance) | S837X Series (Low Cost) |
Pixel Format | 25 or 50 μm pixel pitch; 0.5 or 2.5 mm pixel height; 512 pixels or 1024 pixels | |
Detector QE | Refer to graphs below | |
Full Well (e-) | From 94 Me¯ to 1 Ge¯ (typical) | From 43 Me¯ to 430 Me¯ (typical) |
Readout Noise (e-) | 5200 e¯ (typical) | 3370 e¯ (typical) |
Spectrometer housing will be slightly different depending on CMOS-PDA options |