322
Views
Views
9
Favorites
Favorites
Category
All / Fanart
Species Unspecified / Any
Gender Any
Size 987 x 987
File Size 1.01 MB
★
See more from Nathahniel
Listed in Folders
Sky CotL - Rythm Greeter 3D Printable Mask
https://etsy.me/3OPRLoT
Please use the following measurements as a guide when printing, and measure the wearer's head prior to printing to ensure you get a good size for wearing, everyone's sizes are a little different. Especially if you have a wider or bigger head!
This was modeled around my own head as reference:
About 21 in / 53.5 cm diameter
About 9 in / 23 cm from top of head to chin
This mask is VERY WIDE and should be "one size fits all" for most teen and adults.
It may need to be scaled down for children (at it's default scale it may be too large.)
DEFAULT MEASUREMENTS:
Please see measurements.png included in the files
With the mask in upright orientation (as if being worn)
Height: 266.0691 mm
Width: 272.3207 mm
Depth: 234.6877 mm
If you purchase this file and believe it needs modifications before printing please contact me so I can update the files for you!~
This file is intended for large printers, but if you need me to chop it up into smaller pieces for your printer, just message me with your print bed size and I'll happily cut it into smaller parts you can glue together!
**Any changes made to update this file for easier printing or use will be redistributed to buyers free of charge, simply show proof of ownership and allow for me to contact you or you can contact me on any of my social media!
Contact Info:
twt: https://twitter.com/nathahniel
e-mail: nathahnielartist [!at] gmail.com
Etsy: https://www.etsy.com/shop/Nathahniel
Ko-Fi: https://ko-fi.com/nathanier
Gumroad: https://nathahniel.gumroad.com/
***RULES:***
DO NOT sell or distribute this .stl file
DO NOT upload this file to sites like thingiverse, sketchfab, etc.
You may send these .stl files to an artist to request or commission an edit. The artist is not required to purchase the file if you are providing it.
You are welcome to use this for crafts other than fursuit heads.
***SELLING BASED ON THESE FILES:***
You may sell up to 20 finished prints of this file per year.
You may not sell the digital files or reupload them elsewhere.
Please use the following measurements as a guide when printing, and measure the wearer's head prior to printing to ensure you get a good size for wearing, everyone's sizes are a little different. Especially if you have a wider or bigger head!
This was modeled around my own head as reference:
About 21 in / 53.5 cm diameter
About 9 in / 23 cm from top of head to chin
This mask is VERY WIDE and should be "one size fits all" for most teen and adults.
It may need to be scaled down for children (at it's default scale it may be too large.)
DEFAULT MEASUREMENTS:
Please see measurements.png included in the files
With the mask in upright orientation (as if being worn)
Height: 266.0691 mm
Width: 272.3207 mm
Depth: 234.6877 mm
If you purchase this file and believe it needs modifications before printing please contact me so I can update the files for you!~
This file is intended for large printers, but if you need me to chop it up into smaller pieces for your printer, just message me with your print bed size and I'll happily cut it into smaller parts you can glue together!
**Any changes made to update this file for easier printing or use will be redistributed to buyers free of charge, simply show proof of ownership and allow for me to contact you or you can contact me on any of my social media!
Contact Info:
twt: https://twitter.com/nathahniel
e-mail: nathahnielartist [!at] gmail.com
Etsy: https://www.etsy.com/shop/Nathahniel
Ko-Fi: https://ko-fi.com/nathanier
Gumroad: https://nathahniel.gumroad.com/
***RULES:***
DO NOT sell or distribute this .stl file
DO NOT upload this file to sites like thingiverse, sketchfab, etc.
You may send these .stl files to an artist to request or commission an edit. The artist is not required to purchase the file if you are providing it.
You are welcome to use this for crafts other than fursuit heads.
***SELLING BASED ON THESE FILES:***
You may sell up to 20 finished prints of this file per year.
You may not sell the digital files or reupload them elsewhere.
Category All / Fanart
Species Unspecified / Any
Gender Any
Size 987 x 987px
File Size 1.01 MB
Get FA 
Merch Store
Comments