[Unicode]  Technical Reports
 

Unicode® Technical Standard #18

Unicode Regular Expressions

Version 23
Editors Mark Davis
Date 2022-02-08
This Version https://www.unicode.org/reports/tr18/tr18-23.html
Previous Version https://www.unicode.org/reports/tr18/tr18-21.html
Latest Version https://www.unicode.org/reports/tr18/
Latest Proposed Update https://www.unicode.org/reports/tr18/proposed.html
Revision 23

Summary

This document describes guidelines for how to adapt regular expression engines to use Unicode.

Status

This document has been reviewed by Unicode members and other interested parties, and has been approved for publication by the Unicode Consortium. This is a stable document and may be used as reference material or cited as a normative reference by other specifications.

A Unicode Technical Standard (UTS) is an independent specification. Conformance to the Unicode Standard does not imply conformance to any UTS.

Please submit corrigenda and other comments with the online reporting form [Feedback]. Related information that is useful in understanding this document is found in the References. For the latest version of the Unicode Standard, see [Unicode]. For a list of current Unicode Technical Reports, see [Reports]. For more information about versions of the Unicode Standard, see [Versions].

Contents


0 Introduction

Regular expressions are a powerful tool for using patterns to search and modify text. They are a key component of many programming languages, databases, and spreadsheets. Starting in 1999, this document has supplied guidelines and conformance levels for supporting Unicode in regular expressions. The following issues are involved in supporting Unicode.

There are three fundamental levels of Unicode support that can be offered by regular expression engines:

In particular:

  1. Level 1 is the minimally useful level of support for Unicode. All regex implementations dealing with Unicode should be at least at Level 1.
  2. Level 2 is recommended for implementations that need to handle additional Unicode features. This level is achievable without too much effort. However, some of the subitems in Level 2 are more important than others: see Level 2.

One of the most important requirements for a regular expression engine is to document clearly what Unicode features are and are not supported. Even if higher-level support is not currently offered, provision should be made for the syntax to be extended in the future to encompass those features.

Note: The Unicode Standard is constantly evolving: new characters will be added in the future. This means that a regular expression that tests for currency symbols, for example, has different results in Unicode 2.0 than in Unicode 2.1, which added the euro sign currency symbol.

At any level, efficiently handling properties or conditions based on a large character set can take a lot of memory. A common mechanism for reducing the memory requirements—while still maintaining performance—is the two-stage table, discussed in Chapter 5 of The Unicode Standard [Unicode]. For example, the Unicode character properties required in RL1.2 Properties can be stored in memory in a two-stage table with only 7 or 8 Kbytes. Accessing those properties only takes a small amount of bit-twiddling and two array accesses.

Note: For ease of reference, the section ordering for this document is intended to be as stable as possible over successive versions. That may lead, in some cases, to the ordering of the sections being less than optimal.

0.1 Notation

In order to describe regular expression syntax, an extended BNF form is used:

Syntax Meaning
x y the sequence consisting of x then y
x* zero or more occurrences of x
x? zero or one occurrence of x
x | y either x or y
( x ) for grouping
"XYZ" terminal character(s)

The text also uses the following notation for sets in describing the behavior of Character Classes.

Symbol Description Example Equivalent
α, β, γ, … A code point or multi-code-point string a, ab, 👧🏿 n/a
A, B, C, … A set of code points and/or strings A n/a
{…} A set of literal items, comma delimited {α, β} n/a
The set of all code points
(= strings with single code points)
ℙ ∩ {a, ab, 👧🏿 } {a}
𝕊 The set of all strings
(zero or more codepoints)
𝕊 ∩ {a, ab, 👧🏿 } {a, ab, 👧🏿 }
A ∪ B Union {α, β} ∪ {β, γ} {α, β, γ}
A ∩ B Intersection {α, β} ∩ {β, γ} {β}
A ∖ B Set Difference {α, β} ∖ {β, γ} {α}
A ⊖ B Symmetric Difference {α, β} ⊖ {β, γ} {α, γ}
𝕊A Full Complement
(all strings except those in A)
∁A
(= ∁𝕊A)
𝕊 ∖ A
A Code Point Complement
(all code points except those in A)
A ℙ ∖ A

The Full Complement of a finite set results in an infinite set. Because that is not useful for regular expressions, the complement operations such as [^...] are interpreted as Code Point Complement.

0.1.1 Character Classes

A Character Class represents a set of characters. When a regex implementation follows Section 2.2.1 Character Classes with Strings the set can include sequences of characters as well. The following syntax for Character Classes is used and extended in successive sections. This syntax is not normative: regular expression implementations may need to use different syntax to be consistent with their current syntax.

Nonterminal Production Rule Comments & Constraints
CHARACTER_CLASS := '[' COMPLEMENT? SEQUENCE ']' If complement is present, it is ∁A, the set of all code points except those in SEQUENCE.
SEQUENCE
:= ITEM union of items: A∪B… This is replaced with operators in RL1.3Subtraction and Intersection
ITEM := LITERAL ('-' LITERAL)?
:= CHARACTER_CLASS
Constraint: parse error if in range with 1st literal > 2nd literal (some Regex Engines may allow them to be identical without an error)
[a] s = a
[a-j] len(s) == 1 AND s ≥ a AND s ≤ j
LITERAL := ESCAPE (SYNTAX_CHAR | SPECIAL_CHAR)
:= NON_SYNTAX_CHAR
Different variants of SYNTAX_CHAR, SPECIAL_CHAR, and NON_SYNTAX_CHAR can be used for particular contexts to maintain compatibility
COMPLEMENT := '^'
 
ESCAPE := '\'
 
SYNTAX_CHAR := [\- \[ \] \{ \} / \\ \^ |]
 
SPECIAL_CHAR := [abcefnrtu]
The exact set of SPECIAL_CHAR may vary across Regex engines
NON_SYNTAX_CHAR := [^SYNTAX_CHAR]
[^SYNTAX_CHAR] means all valid Unicode code points except for those in SYNTAX_CHAR
SP := ' '  

The EBNF can be enhanced with other features. For example, to allow ignored spaces for readability, it can add \u{20} to SYNTAX_CHAR, and add SP? around various elements, change ITEM to SP? ITEM (SP? ITEM) , etc. In this document, SP is allowed between any elements in examples, but to simplify the presentation those changes are omitted from the EBNF.

In subsequent sections of this document, additional EBNF lines will be added for additional features. In one case, marked in a comment, one of the above lines will be replaced.

Complementing affects the entire value in square brackets. That is, [^abcm-z] = [^[abcm-z]]. It is defined to be the Code Point Complement = ℙ ∖ A, and consists of the set of all code points that are not in the enclosed character class. Using syntax introduced below, [^A] is equivalent to [\p{any}--[A]] or to an expression with the equivalent literal, [[\u{0}-\u{10FFFF}]--[A]].

See Annex D: Resolving Character Classes with Strings and Complement for details.

For the purpose of regular expressions, in this document the terms “character” and “code point” are used interchangeably. Similarly, the terms “string” and “sequence of code points” are used interchangeably. Typically the code points of interest will be those representing characters. A Character Class is also referred to as the set of all characters specified by that Character Class.

In addition, for readability the simple parentheses are used where in practice a non-capturing group would be used. That is, (ab|c) is written instead of (?:ab|c).

Code points that are syntax characters or whitespace are typically escaped. For more information see [UAX31]. In examples, the syntax "\s" is sometimes used to indicate whitespace. See also Annex C: Compatibility Properties. Also, in many regex implementations, the first position after the opening '[' or '[^' is treated specially, with some syntax chars treated as literals.

Note: This is only a sample syntax for the purposes of examples in this document. Regular expression syntax varies widely: the issues discussed here would need to be adapted to the syntax of the particular implementation. However, it is important to have a concrete syntax to correctly illustrate the different issues. In general, the syntax here is similar to that of Perl Regular Expressions [Perl].) In some cases, this gives multiple syntactic constructs that provide for the same functionality.

The following table gives examples of Character Classes:

Character Class Matches
[a-z || A-Z || 0-9] ASCII alphanumerics
[a-z A-Z 0-9]
[a-zA-Z0-9]
[^a-z A-Z 0-9] all code points except ASCII alphanumerics
[\] \- \ ] the literal characters ], -, <space>

Where string offsets are used in examples, they are from zero to n (the length of the string), and indicate positions between characters. Thus in "abcde", the substring from 2 to 4 includes the two characters "cd".

The following additional notation is defined for use here and in other Unicode specifications:

Syntax Meaning Note
\n
As used within regular expressions, expands to the text matching the nth parenthesized group in the regular expression. (à la Perl) n is an ASCII digit. Implementations may impose limits on the number of digits.
$n As used within replacement strings for regular expressions, expands to the text matching the nth parenthesized group in a corresponding regular expression. (à la Perl) The value of $0 is the entire expression.

Because any character could occur as a literal in a regular expression, when regular expression syntax is embedded within other syntax it can be difficult to determine where the end of the regex expression is. Common practice is to allow the user to choose a delimiter like '/' in /ab(c)*/. The user can then simply choose a delimiter that is not in the particular regular expression.

0.1.2 Property Examples

All examples of properties being equivalent to certain literal character classes are illustrative. They were generated at a point in time, and are not updated with each release. Thus when an example contains “\p{sc=Hira} = [ぁ-ゖゝ-ゟ𛀁🈀]”, it does not imply that that identity expression would be true for the current version of Unicode.

0.2 Conformance

The following section describes the possible ways that an implementation can claim conformance to this Unicode Technical Standard.

All syntax and API presented in this document is only for the purpose of illustration; there is absolutely no requirement to follow such syntax or API. Regular expression syntax varies widely: the features discussed here would need to be adapted to the syntax of the particular implementation. In general, the syntax in examples is similar to that of Perl Regular Expressions [Perl], but it may not be exactly the same. While the API examples generally follow Java style, it is again only for illustration.

C0. An implementation claiming conformance to this specification at any Level shall identify the version of this specification and the version of the Unicode Standard.
 
C1. An implementation claiming conformance to Level 1 of this specification shall meet the requirements described in the following sections:
RL1.1 Hex Notation
RL1.2 Properties
RL1.2a Compatibility Properties
RL1.3 Subtraction and Intersection
RL1.4 Simple Word Boundaries
RL1.5 Simple Loose Matches
RL1.6 Line Boundaries
RL1.7 Supplementary Code Points
C2. An implementation claiming conformance to Level 2 of this specification shall satisfy C1, and meet the requirements described in the following sections:
RL2.1 Canonical Equivalents
RL2.2 Extended Grapheme Clusters and Character Classes with Strings
RL2.3 Default Word Boundaries
RL2.4 Default Case Conversion
RL2.5 Name Properties
RL2.6 Wildcards in Property Values
RL2.7 Full Properties
C3. This conformance clause has been removed.
C4. An implementation claiming partial conformance to this specification shall clearly indicate which levels are completely supported (C1-C2), plus any additional supported features from higher levels.

For example, an implementation may claim conformance to Level 1, except for Subtraction and Intersection.

A regular expression engine may be operating in the context of a larger system. In that case some of the requirements may be met by the overall system. For example, the requirements of Section 2.1 Canonical Equivalents might be best met by making normalization available as a part of the larger system, and requiring users of the system to normalize strings where desired before supplying them to the regular-expression engine. Such usage is conformant, as long as the situation is clearly documented.

A conformance claim may also include capabilities added by an optional add-on, such as an optional library module, as long as this is clearly documented.

For backwards compatibility, some of the functionality may only be available if some special setting is turned on. None of the conformance requirements require the functionality to be available by default.


1 Basic Unicode Support: Level 1

Regular expression syntax usually allows for an expression to denote a set of single characters, such as [a-z A-Z 0-9]. Because there are a very large number of characters in the Unicode Standard, simple list expressions do not suffice.

1.1 Hex Notation

The character set used by the regular expression writer may not be Unicode, or may not have the ability to input all Unicode code points from a keyboard.

RL1.1 Hex Notation
To meet this requirement, an implementation shall supply a mechanism for specifying any Unicode code point (from U 0000 to U 10FFFF), using the hexadecimal code point representation.

The syntax must use the code point in its hexadecimal representation. For example, syntax such as \uD834\uDD1E or \xF0\x9D\x84\x9E does not meet this requirement for expressing U 1D11E ( 𝄞 ) because "1D11E" does not appear in the syntax. In contrast, syntax such as \U0001D11E, \x{1D11E} or \u{1D11E} does satisfy the requirement for expressing U 1D11E.

A sample notation for listing hex Unicode characters within strings uses "\u" followed by four hex digits or "\u{" followed by any number of hex digits and terminated by "}", with multiple characters indicated by separating the hex digits by spaces. This would provide for the following addition:

Nonterminal Production Rule Comments & Constraints
LITERAL := HEX Adds to previous LITERAL rules.
HEX := '\u' HEX_CHAR{4}                 
:= '\u{' CODEPOINT (SP CODEPOINT)* '}'
\u{3b1 3b3 3b5 3b9}
==
\u{3b1}\u{3b3}\u{3b5}\u{3b9}
HEX_CHAR := [0-9A-Fa-f]  
CODEPOINT := '10' HEX_CHAR{4} | HEX_CHAR{1,5}  
Note: \u{​​3b1 3b3 3b5 3b9} is semantic sugar — useful for readability and concision but not a requirement. It can be used anywhere the equivalent individual hex escapes could be, thus [a-\u{3b1 3b3}-ζ] behaves like [a-\u{3b1}\u{3b3}-ζ] == [a-αγ-ζ]

The following table gives examples of this hex notation:

Syntax Matches
[\u{3040}-\u{309F} \u{30FC}] Hiragana characters, plus prolonged sound sign
[\u{B2} \u{2082}] superscript ² and subscript ₂
[a \u{10450}] "a" and U 10450 SHAVIAN LETTER PEEP
ab\u{63 64} "abcd"

More advanced regular expression engines can also offer the ability to use the Unicode character name for readability. See 2.5 Name Properties.

For comparison, the following table shows some additional examples of escape syntax for Unicode code points:

Type Escaped Characters Escaped String
Unescaped 👽 £ a <tab> 👽€£a<tab>
Code Point† U 1F47D U 20AC U 00A3 U 0061 U 0009 U 1F47D U 20AC U 00A3 U 0061 U 0009
UTS18, Ruby \u{1F47D} \u{20AC} \u{A3} \u{61} \u{9} \u{1F47D 20AC A3 61 9}
Swift, Javascript (ECMAScript) \u{1F47D} \u{20AC} \u{A3} \u{61} \u{9} \u{1F47D}\u{20AC}\u{A3}\u{61}\u{9}
Perl, Java, ICU* \x{1F47D} \x{20AC} \x{A3} \x{61} \x{9} \x{1F47D}\x{20AC}\x{A3}\x{61}\x{9}
C , Python \U0001F47D \u20AC \u00A3 \u0061 \u0009 \U0001F47D\u20AC\u00A3\u0061\u0009
XML, HTML &#x1F47D; &#x20AC; &#xA3; &#x61; &#x9; &#x1F47D;&#x20AC;&#xA3;&#x61;&#x9;
CSS† \1F47D \20AC \A3 \61 \9 \1F47D \20AC \A3 \61 \9

† Following whitespace is consumed.
* ICU4C regex ICU UnicodeSet

1.1.1 Hex Notation and Normalization

The Unicode Standard treats certain sequences of characters as equivalent, such as the following:

u grave U 0075 ( u ) LATIN SMALL LETTER U
U 0300 ( ◌̀ ) COMBINING GRAVE ACCENT
u_grave U 00F9 ( ù ) LATIN SMALL LETTER U WITH GRAVE

Literal text in regular expressions may be normalized (converted to equivalent characters) in transmission, out of the control of the authors of that text. For example, a regular expression may contain a sequence of literal characters 'u' and grave, such as the expression [aeiou◌̀◌́◌̈] (the last three characters being U 0300 ( ◌̀ ) COMBINING GRAVE ACCENT, U 0301 ( ◌́ ) COMBINING ACUTE ACCENT, and U 0308 ( ◌̈ ) COMBINING DIAERESIS. In transmission, the two adjacent characters in Row 1 might be changed to the different expression containing just one character in Row 2, thus changing the meaning of the regular expression. Hex notation can be used to avoid this problem. In the above example, the regular expression should be written as [aeiou\u{300 301 308}] for safety.

A regular expression engine may also enforce a single, uniform interpretation of regular expressions by always normalizing input text to Normalization Form NFC before interpreting that text. For more information, see UAX #15, Unicode Normalization Forms [UAX15].

1.2 Properties

Because Unicode is a large character set that is regularly extended, a regular expression engine needs to provide for the recognition of whole categories of characters as well as simply literal sets of characters and strings; otherwise the listing of characters becomes impractical, out of date, and error-prone. This is done by providing syntax for sets of characters based on the Unicode character properties, as well as related properties and functions. Examples of such syntax are \p{Script=Greek} and [:Script=Greek:], which both stand for the set of characters that have the Script value of Greek. In addition to the basic syntax, regex engines also need to allow them to be combined with other sets defined by properties or with literal sets of characters and strings. An example is [\p{Script=Greek}--\p{General_Category=Letter}], which stands for the set of characters that have the Script value of Greek and that do not have the General_Category value of Letter.

Many character properties are defined in the Unicode Character Database (UCD), which also provides the official data for mapping Unicode characters (and code points) to property values. See UAX #44, Unicode Character Database [UAX44] and Chapter 4 in The Unicode Standard [Unicode]. For use in regular expressions, properties can also be considered to be defined by Unicode definitions and algorithms, and by data files and definitions associated with other Unicode Technical Standards, such as UTS #51, Unicode Emoji. For example, this includes the Basic_Emoji definition from UTS #51. The full list of recommended properties is in Section 2.7, Full Properties.

UAX #44, Unicode Character Database [UAX44] divides character properties into several types: Catalog, Enumeration, Binary, String, Numeric, and Miscellaneous. Those categories are not all precisely defined or immediately relevant to regular expressions. Some are more pertinent to the maintenance of the Unicode Character Database.

1.2.1 Domain of Properties

For regular expressions, it is more helpful to divide up properties by the treatment of their domain (what they are properties of) and their codomain (the values of the properties). Most properties are properties of Unicode code points; thus their domains are simply the full set of Unicode code points. Typically the important information is for the subset of the code points that are characters; therefore, those properties are often also called properties of characters.

In addition to properties of characters, there are also properties of strings (sequences of characters). A property of strings is more general than a property of characters. In other words, any property of characters is also a property of strings; its domain is, however, limited to strings consisting of a single character.

Data, definitions, and properties defined by the Unicode Standard and other Unicode Technical Standards, which map from strings to values, can thus be specified in this document as defining regular-expression properties.

A complement of a property of strings or a Character Class with strings may not be valid in regular expressions. For more information, see Annex D: Resolving Character Classes with Strings and Complement and Section 2.2.1 Character Classes with Strings.

1.2.2 Codomain of Properties

The values (codomain) of properties of characters (or strings) have the following simple types: Binary, Enumerated, Numeric, Code Point, and String. Properties can also have multivalued types: a Set or List of other types.

The Binary type is a special case of an Enumerated type limited to precisely the two values "True" and "False". In general, a property of Enumerated type has a longer list of defined values. Those defined values are abstractions, but they are identified in the Unicode Character Database with labels known as aliases. Thus, the Script value "Devanagari" may also be identified by the abbreviated alias "Deva"—both refer to the same enumerated value, even though the exact label for that value may differ.

The Code Point type is a special case of a String type where the values are always limited to single-code point strings.

The UCD "Catalog" type is the same as Enumerated (the name differs for historical reasons).

1.2.3 Examples of Properties

The following tables provide some examples of property values for each domain type.

Examples of Properties of Characters

Type Property Name Code Point Character Value Regex Literal
Binary White_Space U 0020 " " True
Emoji U 231A True
Enumerated Script U 3032 Common
Code point Simple_Lowercase_Mapping U 0041 A "a" \u{61}
String Name U 0020 " " "SPACE" \u{53 50 41 43 45}
Set Script_Extensions U 3032 {Hira, Kana}

Note: The Script_Extensions property maps from code points to a set of enumerated Script property values.

Expressions involving Set properties, which have multiple values, are most often tested for containment, not equality. An expression like \p{Script_Extensions=Hira} is interpreted as containment: matching each code point cp such that Script_Extensions(cp) ⊇ {Hira}. Thus, \p{Script_Extensions=Hira} will match both U 3032 〲 VERTICAL KANA REPEAT WITH VOICED SOUND MARK (with value {Hira Kana}) and U 3041 ぁ HIRAGANA LETTER SMALL A (with value {Hira}). That also allows the natural replacement of the regular expression \p{Script=Hira} by \p{Script_Extensions=Hira} — the latter just adds characters that may be either Hira or some other script. For a more detailed example, see Section 1.2.6 Script and Script Extensions Properties.

Expressions involving List properties may be tested for containment, but may have different semantics for the elements based on position. For example, each value of the kMandarin property is a list of up to two String values: the first being preferred for zh-Hans and the second for zh-Hant (where the preference differs).

Examples of Properties of Strings

Type Property Name Code Point(s) Character(s) CLDR Name Value
Binary Basic_Emoji U 231A watch True
U 23F2 U FE0F ⏲️ timer clock True
U 0041 A False
U 0041 U 0042 "AB" False
RGI_Emoji_Flag_Sequence U 1F1EB U 1F1F7 🇫🇷 flag: France True

Note: Properties of strings can always be “narrowed” to just contain code points. For example, [\p{Basic_Emoji} && \p{any}] is the set of characters in Basic_Emoji.

1.2.4 Property Syntax

The recommended names (identifiers) for UCD properties and property values are in PropertyAliases.txt and PropertyValueAliases.txt. There are both abbreviated names and longer, more descriptive names. It is strongly recommended that both names be recognized, and that loose matching of property names and values be implemented following the guidelines in Section 5.9 Matching Rules in [UAX44].

Note: It may be a useful implementation technique to load the Unicode tables that support properties and other features on demand, to avoid unnecessary memory overhead for simple regular expressions that do not use those properties.

Where a regular expression is expressed as much as possible in terms of higher-level semantic constructs such as Letter, it makes it practical to work with the different alphabets and languages in Unicode. The following is an example of a syntax addition that permits properties. Following Perl Syntax, the p is lowercase to indicate a positive match, and uppercase to indicate a complemented match.

Nonterminal Production Rule Comments & Constraints
CHARACTER_CLASS := '\' [pP] '{' PROP_SPEC '}'
:= '[:' COMPLEMENT? PROP_SPEC ':]'
Adds to previous CHARACTER_CLASS rules.
[:X:] is older notation, and is defined to be identical to \p{X}
\P{X} and [:^X:] are defined to be identical to [^\p{X}], that is, the Code Point Complement of \p{X}.
PROP_SPEC := PROP_NAME (RELATION  PROP_VALUE)?  
PROP_NAME := ID_CHAR Constraint: PROP_NAME = valid Unicode property name or alias (RL1.2 Properties2.7 Full PropertiesRL2.7 Full Properties), or optional property name or alias (2.8 Optional Properties)
ID_CHAR := [A-Za-z0-9\ \-_]  
RELATION := '=' | '≠' | '!='  
PROP_VALUE := LITERAL* Constraint: PROP_VALUE = valid Unicode property value for that PROP_NAME

The following table shows examples of this extended syntax to match properties:

Syntax Matches
[\p{L} \p{Nd}] all letters and decimal digits
[\p{letter} \p{decimal number}]
[\p{letter|decimal number}]
[\p{L|Nd}]
\P{script=greek} all code points except those with the Greek script property
\P{script=greek}
\p{script≠greek}
[:^script=greek:]
[:^script:greek:]
[:script≠greek:]
\p{East Asian Width:Narrow} anything that has the enumerated property value East_Asian_Width = Narrow
\p{Whitespace} anything that has binary property value Whitespace = True
\p{scx=Kana} The match is to all characters whose Script_Extensions property value includes the specified value(s). So this expression matches U 30FC, which has the Script_Extensions value {Hira, Kana}

Some properties are binary: they are either true or false for a given code point. In that case, only the property name is required. Others have multiple values, so for uniqueness both the property name and the property value need to be included.

For example, Alphabetic is a binary property, but it is also a value of the enumerated Line_Break property. So \p{Alphabetic} would refer to the binary property, whereas \p{Line Break:Alphabetic} or \p{Line_Break=Alphabetic} would refer to the enumerated Line_Break property.

There are two exceptions to the general rule that expressions involving properties with multiple value should include both the property name and property value. The Script and General_Category properties commonly have their property name omitted. Thus \p{Unassigned} is equivalent to \p{General_Category = Unassigned}, and \p{Greek} is equivalent to \p{Script=Greek}.

RL1.2 Properties
To meet this requirement, an implementation shall provide at least a minimal list of properties, consisting of the following: The values for these properties must follow the Unicode definitions, and include the property and property value aliases from the UCD. Matching of Binary, Enumerated, Catalog, and Name values must follow the Matching Rules from [UAX44] with one exception: implementations are not required to ignore an initial prefix string of "is" in property values.
RL1.2a Compatibility Properties
  To meet this requirement, an implementation shall provide the properties listed in Annex C: Compatibility Properties, with the property values as listed there. Such an implementation shall document whether it is using the Standard Recommendation or POSIX-compatible properties.

In order to meet requirements RL1.2 and RL1.2a, the implementation must satisfy the Unicode definition of the properties for the supported version of The Unicode Standard, rather than other possible definitions. However, the names used by the implementation for these properties may differ from the formal Unicode names for the properties. For example, if a regex engine already has a property called "Alphabetic", for backwards compatibility it may need to use a distinct name, such as "Unicode_Alphabetic", for the corresponding property listed in RL1.2.

Implementers may add aliases beyond those recognized in the UCD. For example, in the case of the Age property an implementation could match the defined aliases "3.0" and "V3_0", but also match "3", "3.0.0", "V3.0", and so on. However, implementers must be aware that such additional aliases may cause problems if they collide with future UCD aliases for different values.

Ignoring an initial "is" in property values is optional. Loose matching rule UAX44-LM3 in [UAX44] specifies that occurrences of an initial prefix of "is" are ignored, so that, for example, "Greek" and "isGreek" are equivalent as property values. Because existing implementations of regular expressions commonly make distinctions based on the presence or absence of "is", this requirement from [UAX44] is dropped.

For more information on properties, see UAX #44, Unicode Character Database [UAX44].

Of the properties in RL1.2, General_Category and Script have enumerated property values with more than two values; the other properties are binary. An implementation that does not support non-binary enumerated properties can essentially "flatten" the enumerated type. Thus, for example, instead of \p{script=latin} the syntax could be \p{script_latin}.

1.2.5 General Category Property

The most basic overall character property is the General_Category, which is a basic categorization of Unicode characters into: Letters, Punctuation, Symbols, Marks, Numbers, Separators, and Other. These property values each have a single letter abbreviation, which is the uppercase first character except for separators, which use Z. The official data mapping Unicode characters to the General_Category value is in UnicodeData.txt.

Each of these categories has different subcategories. For example, the subcategories for Letter are uppercase, lowercase, titlecase, modifier, and other (in this case, other includes uncased letters such as Chinese). By convention, the subcategory is abbreviated by the category letter (in uppercase), followed by the first character of the subcategory in lowercase. For example, Lu stands for Uppercase Letter.

Note: Because it is recommended that the property syntax be lenient as to spaces, casing, hyphens and underbars, any of the following should be equivalent: \p{Lu}, \p{lu}, \p{uppercase letter}, \p{Uppercase Letter}, \p{Uppercase_Letter}, and \p{uppercaseletter}

The General_Category property values are listed below. For more information on the meaning of these values, see UAX #44, Unicode Character Database [UAX44].

Abb. Long form
L Letter
Lu Uppercase Letter
Ll Lowercase Letter
Lt Titlecase Letter
Lm Modifier Letter
Lo Other Letter
M Mark
Mn Non-Spacing Mark
Mc Spacing Combining Mark
Me Enclosing Mark
N Number
Nd Decimal Digit Number
Nl Letter Number
No Other Number
Abb. Long form
S Symbol
Sm Math Symbol
Sc Currency Symbol
Sk Modifier Symbol
So Other Symbol
P Punctuation
Pc Connector Punctuation
Pd Dash Punctuation
Ps Open Punctuation
Pe Close Punctuation
Pi Initial Punctuation
Pf Final Punctuation
Po Other Punctuation
Abb. Long form
Z Separator
Zs Space Separator
Zl Line Separator
Zp Paragraph Separator
C Other
Cc Control
Cf Format
Cs Surrogate
Co Private Use
Cn Unassigned
- Any*
- Assigned*
- ASCII*

Starred entries in the table are not part of the enumeration of General_Category values. They are explained below.

Value Matches Equivalent to Notes
Any all code points, that is: ℙ [\u{0}-\u{10FFFF}] In some regular expression languages, \p{Any} may be expressed by a period ("."), but that usage may exclude newline characters.
Assigned all assigned characters (for the target version of Unicode) \P{Cn} This also includes all private use characters. It is useful for avoiding confusing double complements. Note that Cn includes noncharacters, so Assigned excludes them.
ASCII all ASCII characters [\u{0}-\u{7F}]  

1.2.6 Script and Script Extensions Properties

A regular-expression mechanism may choose to offer the ability to identify characters on the basis of other Unicode properties besides the General Category. In particular, Unicode characters are also divided into scripts as described in UAX #24, Unicode Script Property [UAX24] (for the data file, see Scripts.txt). Using a property such as \p{sc=Greek} allows implementations to test whether letters are Greek or not.

Some characters, such as U 30FC ( ー ) KATAKANA-HIRAGANA PROLONGED SOUND MARK, are regularly used with multiple scripts. For such characters the Script_Extensions property (abbreviated as scx) identifies the set of associated scripts. The following shows some sample characters with their Script and Script_Extensions property values:

Code Char Name sc scx
U 3042 HIRAGANA LETTER A Hira {Hira}
U 30FC KATAKANA-HIRAGANA PROLONGED SOUND MARK Zyyy = Common {Hira, Kana}
U 3099 COMBINING KATAKANA-HIRAGANA VOICED SOUND MARK Zinh = Inherited {Hira, Kana}
U 30FB KATAKANA MIDDLE DOT Zyyy = Common {Bopo, Hang, Hani, Hira, Kana, Yiii}

The expression \p{sc=Hira} includes those characters whose Script value is Hira, while the expression \p{scx=Hira} includes all the characters whose Script_Extensions value contains Hira. The following table shows the difference:

Expression Contents of Set
\p{sc=Hira} [ぁ-ゖゝ-ゟ𛀁🈀]
\p{scx=Hira} [、-〃〆〈-】〓-〟〰-〵〷〼-〿ぁ-ゖ ゙-゠・ー㆐-㆟㇀-㇣㈠-㉃㊀-㊰㋀-㋋㍘-㍰ ㍻-㍿㏠-㏾﹅﹆。-・ー゙゚𛀁🈀]

See Section 0.1.2 Property Examples for information about updates to the contents of a literal set across versions.

The expression \p{scx=Hira} contains not only the characters in \p{script=Hira}, but many other characters such as U 30FC ( ー ), which are either Hiragana or Katakana.

In most cases, script extensions are a superset of the script values (\p{scx=X}\p{sc=X}). However, in some cases that is not true. For example, the Script property value for U 30FC ( ー ) is Common, but the Script_Extensions value for U 30FC ( ー ) does not contain the script value Common. In other words, \p{scx=Common}\p{sc=Common}.

The usage model for the Script and Script_Extensions properties normally requires that people construct somewhat more complex regular expressions, because a great many characters (Common and Inherited) are shared between scripts. Documentation should point users to the description in [UAX24]. The values for Script_Extensions are likely be extended over time as new information is gathered on the use of characters with different scripts. For more information, see The Script_Extensions Property in UAX #24, Unicode Script Property [UAX24].

1.2.7 Age

As defined in the Unicode Standard, the Age property (in the DerivedAge data file in the UCD) specifies the first version of the standard in which each character was assigned. It does not refer to how long it has been encoded, nor does it indicate the historic status of the character.

In regex expressions, the Age property is used to indicate the characters that were in a particular version of the Unicode Standard. That is, a character has the Age property of that version or less. Thus \p{age=3.0} includes the letter a, which was included in Unicode 1.0. To get characters that are new in a particular version, subtract off the previous version as described in 1.3 Subtraction and Intersection. For example: [\p{age=3.1} -- \p{age=3.0}].

1.2.8 Blocks

Unicode blocks have an associated enumerated property, the Block property. However, there are some very significant caveats to the use of Unicode blocks for the identification of characters: see Annex A: Character Blocks. If blocks are used, some of the names can collide with Script names, so they should be distinguished, with syntax such as \p{Greek Block} or \p{Block=Greek}.

1.3 Subtraction and Intersection

As discussed earlier, character properties are essential with a large character set. In addition, there needs to be a way to "subtract" characters from what is already in the list. For example, one may want to include all non-ASCII letters without having to list every character in \p{letter} that is not one of those 52.

RL1.3 Subtraction and Intersection
To meet this requirement, an implementation shall supply mechanisms for union, intersection and set-difference of sets of characters within regular expression character class expressions.

The following is an example of a syntax extension to handle set operations:

Nonterminal Production Rule Comments & Constraints
SEQUENCE := ITEM (SEQ_EXTEND)* Replaces SEQUENCE definition above (which has just ITEM )
SEQ_EXTEND := OPERATOR CHARACTER_CLASS | ITEM Constraint: the last entity before the OPERATOR can also be required to be a CHARACTER_CLASS. See the notes below.
OPERATOR := '||'
:= '&&'
:= '--'
:= '~~'
union: A∪B (explicit operator where desired for clarity)
intersection: A∩B
set difference: A∖B
symmetric difference: A⊖B = (A∪B)\(A∩B)

The symmetric difference of two sets is defined as being the union minus the intersection, that is (A∪B)\(A∩B), or equivalently, the union of the asymmetric differences (A\B)∪(B\A).

For discussions of support by various engines, see:

Either set difference or symmetric difference can be used with union to produce all combinations of sets that can be used in regular expressions. They cannot be replaced by [^...], because it is defined to be Code Point Complement. For example, you cannot express [A--B] as [A&&[^B]]: the following are not equivalent if A contains a string s that is not in B.

Expression

Contains s?

Comment
[A--B] Yes Remove everything in B from A. Because s is not in B, it remains in A
[A&&[^B]] No Retain only code points that are not in B. So s is removed from A.

Code point complement can also be expressed using the property \p{any} or the equivalent literal [\u{0}-\u{10FFFF}]. Thus [^A] is equivalent to [\p{any}--A] and to [[\u0}-\u{10FFFF}]--A].

See Annex D: Resolving Character Classes with Strings and Complement for details.

For clarity, it is common to use doubled symbols, and require a CHARACTER_CLASS on both sides of the OPERATOR, such as [[abc]--[cde]]. Thus [abc--cde] or [abc--[cde]] or [[abc]--cde] would be illegal syntax, and cause a parse error. This also decreases the risk that the meaning of an older regular expression accidentally changes.

Note: There is no exact analog between arithmetic operations and the set operations. The operator || adds items to the current results, the operators && and -- remove items, and the operator ~~ both adds and removes items.

This specification does not require any particular operator precedence scheme. The illustrative syntax puts all operators on the same precedence level, similar to how in arithmetic expressions work with and -, where a b - c d - e is the same as ((((a b) - c) d) - e). That is, in the absence of brackets, each operator combines the following CHARACTER_CLASS with the current accumulated results. Using the same precedence level also works well in parsing (see Annex F. Parsing Character Classes).

Binding or precedence may vary by regular expression engine, so as a user it is safest to always disambiguate using brackets to be sure. In particular, precedence may put all operators on the same level, or may take union as binding more closely. For example, where A..F stand for expressions, not characters:

Expression Precedence Interpreted as Interpreted as
[AB--CD&&EF] Union, intersection, and difference bind at the same level [[[[[AB]--C]D]&&E]F] clone(A).add(B)
.remove(C).add(D)
.retain(E).add(F)
Union binds more closely than difference or intersection [[[AB]--[CD]]&&[EF]] clone(A).add(B)
.remove(clone(C).add(D))
.retain(clone(E).add(F))

Binding at the same level is used in this specification.

The following table shows various examples of set subtraction:

Expression Matches
[\p{L}--[QW]] all letters but Q and W
[\p{N}--[\p{Nd}--[0-9]]] all non-decimal numbers, plus 0-9
[\u{0}-\u{7F}--\P{letter}] all letters in the ASCII range, by subtracting non-letters
[\p{Greek}--\N{GREEK SMALL LETTER ALPHA}] Greek letters except alpha
[\p{Assigned}--\p{Decimal Digit Number}--[a-fA-Fa-fA-F]] all assigned characters except for hex digits (using a broad definition)
[\p{letter}~~\p{ascii}] either letter or ascii, but not both. Equivalent to
[[\p{letter}\p{ascii}]--[\p{letter}&&\p{ascii}]]

The boolean expressions can also involve properties of strings or Character Classes with strings. Thus the following matches all code points that neither have a Script value of Greek nor are in Basic_Emoji:

[^[\p{Script=Greek} && \p{Basic_Emoji}]]

For more information, see Annex D: Resolving Character Classes with Strings and Complement and Section 2.2.1 Character Classes with Strings.

1.4 Simple Word Boundaries

Most regular expression engines allow a test for word boundaries (such as by "\b" in Perl). They generally use a very simple mechanism for determining word boundaries: one example of that would be having word boundaries between any pair of characters where one is a <word_character> and the other is not, or at the start and end of a string. This is not adequate for Unicode regular expressions.

RL1.4 Simple Word Boundaries
To meet this requirement, an implementation shall extend the word boundary mechanism so that:
  1. The class of <word_character> includes all the Alphabetic values from the Unicode character database, from UnicodeData.txt, plus the decimals (General_Category=Decimal_Number, or equivalently Numeric_Type=Decimal), and the U 200C ZERO WIDTH NON-JOINER and U 200D ZERO WIDTH JOINER (Join_Control=True). See also Annex C: Compatibility Properties.
  2. Nonspacing marks are never divided from their base characters, and otherwise ignored in locating boundaries.

Level 2 provides more general support for word boundaries between arbitrary Unicode characters which may override this behavior.

1.5 Simple Loose Matches

Most regular expression engines offer caseless matching as the only loose matching. If the engine does offer this, then it needs to account for the large range of cased Unicode characters outside of ASCII.

RL1.5 Simple Loose Matches
To meet this requirement, if an implementation provides for case-insensitive matching, then it shall provide at least the simple, default Unicode case-insensitive matching, and specify which properties are closed and which are not.

To meet this requirement, if an implementation provides for case conversions, then it shall provide at least the simple, default Unicode case folding.

In addition, because of the vagaries of natural language, there are situations where two different Unicode characters have the same uppercase or lowercase. To meet this requirement, implementations must implement these in accordance with the Unicode Standard. For example, the Greek U 03C3 "σ" small sigma, U 03C2 "ς" small final sigma, and U 03A3 "Σ" capital sigma all match.

Some caseless matches may match one character against two: for example, U 00DF "ß" matches the two characters "SS". And case matching may vary by locale. However, because many implementations are not set up to handle this, at Level 1 only simple case matches are necessary. To correctly implement a caseless match, see Chapter 3, Conformance of [Unicode]. The data file supporting caseless matching is [CaseData].

To meet this requirement, where an implementation also offers case conversions, these must also follow Chapter 3, Conformance of [Unicode]. The relevant data files are [SpecialCasing] and [UData].

Matching case-insensitively is one example of matching under an equivalence relation:

A regular expression R matches under an equivalence relation E whenever for all strings S and T:

If S is equivalent to T under E, then R matches S if and only if R matches T.

In the Unicode Standard, the relevant equivalence relation for case-insensitivity is established according to whether two strings case fold to the same value. The case folding can either be simple (a 1:1 mapping of code points) or full (with some 1:n mappings).

In practice, regex APIs are not set up to match parts of characters. For this reason, full case equivalence is difficult to handle with regular expressions. For more information, see Section 2.1, Canonical Equivalents.

For case-insensitive matching:

  1. Each string literal is matched case-insensitively. That is, it is logically expanded into a sequence of OR expressions, where each OR expression lists all of the characters that have a simple case-folding to the same value.
    • For example, /Dåb/ matches as if it were expanded into /(?:d|D)(?:å|Å|\u{212B})(?:b|B)/.
      (The \u{212B} is an angstrom sign, identical in appearance to Å.)
    • Back references are subject to this logical expansion, such as /(?i)(a.c)\1/, where \1 matches what is in the first grouping.
  2. (optional) Each character class is closed under case. That is, it is logically expanded into a set of code points, and then closed by adding all simple case equivalents of each of those code points.
    • For example, [\p{Block=Phonetic_Extensions} [A-E]] is a character class that matches 133 code points (under Unicode 6.0). Its case-closure adds 7 more code points: a-e, Ᵽ, and Ᵹ, for a total of 140 code points.

For condition #2, in both property character classes and explicit character classes, closing under simple case-insensitivity means including characters not in the set. For example:

Conformant implementations can choose whether and how to apply condition #2: the only requirement is that they declare what they do. For example, an implementation may:

  1. uniformly apply condition #2 to all property and explicit character classes
  2. uniformally not apply condition #2 to any property or explicit character classes
  3. apply condition #2 only within the scope of a switch
  4. apply condition #2 to just specific properties and/or explicit character classes

1.6 Line Boundaries

Most regular expression engines also allow a test for line boundaries: end-of-line or start-of-line. This presumes that lines of text are separated by line (or paragraph) separators.

RL1.6 Line Boundaries
To meet this requirement, if an implementation provides for line-boundary testing, it shall recognize not only CRLF, LF, CR, but also NEL (U 0085), PARAGRAPH SEPARATOR (U 2029) and LINE SEPARATOR (U 2028).

Formfeed (U 000C) also normally indicates an end-of-line. For more information, see Chapter 3 of [Unicode].

These characters should be uniformly handled in determining logical line numbers, start-of-line, end-of-line, and arbitrary-character implementations. Logical line number is useful for compiler error messages and the like. Regular expressions often allow for SOL and EOL patterns, which match certain boundaries. Often there is also a "non-line-separator" arbitrary character pattern that excludes line separator characters.

The behavior of these characters may also differ depending on whether one is in a "multiline" mode or not. For more information, see Anchors and Other "Zero-Width Assertions" in Chapter 3 of [Friedl].

A newline sequence is defined to be any of the following:

\u{A} | \u{B} | \u{C} | \u{D} | \u{85} | \u{2028} | \u{2029} | \u{D A}

  1. Logical line number
    • The line number is increased by one for each occurrence of a newline sequence.
    • Note that different implementations may call the first line either line zero or line one.
  2. Logical beginning of line (often "^")
    • SOL is at the start of a file or string, and depending on matching options, also immediately following any occurrence of a newline sequence.
    • There is no empty line within the sequence \u{D A}, that is, between the first and second character.
    • Note that there may be a separate pattern for "beginning of text" for a multiline mode, one which matches only at the beginning of the first line. For example, in Perl this is \A.
  3. Logical end of line (often "$")
    • EOL at the end of a file or string, and depending on matching options, also immediately preceding a final occurrence of a newline sequence.
    • There is no empty line within the sequence \u{D A}, that is, between the first and second character.
    • SOL and EOL are not symmetric because of multiline mode: EOL can be interpreted in at least three different ways:
      1. EOL matches at the end of the string
      2. EOL matches before final newline
      3. EOL matches before any newline
  4. Arbitrary character pattern (often ".")
    • Where the 'arbitrary character pattern' matches a newline sequence, it must match all of the newline sequences, and \u{D A} (CRLF) should match as if it were a single character. (The recommendation that CRLF match as a single character is, however, not required for conformance to RL1.6.)
    • Note that ^$ (an empty line pattern) should not match the empty string within the sequence \u{D A}, but should match the empty string within the reversed sequence \u{A D}.

It is strongly recommended that there be a regular expression meta-character, such as "\R", for matching all line ending characters and sequences listed above (for example, in #1). This would correspond to something equivalent to the following expression. That expression is slightly complicated by the need to avoid backup.

(?:\u{D A}|(?!\u{D A})[\u{A}-\u{D}\u{85}\u{2028}\u{2029}]

Note: For some implementations, there may be a performance impact in recognizing CRLF as a single entity, such as with an arbitrary pattern character ("."). To account for that, an implementation may also satisfy R1.6 if there is a mechanism available for converting the sequence CRLF to a single line boundary character before regex processing.

For more information on line breaking, see [UAX14].

1.7 Code Points

A fundamental requirement is that Unicode text be interpreted semantically by code point, not code units.

RL1.7 Supplementary Code Points
To meet this requirement, an implementation shall handle the full range of Unicode code points, including values from U FFFF to U 10FFFF. In particular, where UTF-16 is used, a sequence consisting of a leading surrogate followed by a trailing surrogate shall be handled as a single code point in matching.

UTF-16 uses pairs of 16-bit code units to express code points above FFFF16, while UTF-8 uses from two to four 8-bit code units to represent code points above 7F16. Surrogate pairs (or their equivalents in other encoding forms) are to be handled internally as single code point values. In particular, [\u{0}-\u{10000}] will match all the following sequence of code units:

Code Point UTF-8 Code Units UTF-16 Code Units UTF-32 Code Units
7F 7F 007F 0000007F
80 C2 80 0080 00000080
7FF DF BF 07FF 000007FF
800 E0 A0 80 0800 00000800
FFFF EF BF BF FFFF 0000FFFF
10000 F0 90 80 80 D800 DC00 00010000

For backwards compatibility, some regex engines allow for switches to reset matching to be by code unit instead of code point. Such usage is discouraged. For example, in order to match 👎  it is far better to write \u{1F44E) rather than \uD83D\uDC4E (using UTF-16) or \xF0\x9F\x91\x8E (using UTF-8).

Note: It is permissible, but not required, to match an isolated surrogate code point (such as \u{D800}), which may occur in Unicode 16-bit Strings. See Unicode String in the Unicode [Glossary].


2 Extended Unicode Support: Level 2

Level 1 support works well in many circumstances. However, it does not handle more complex languages or extensions to the Unicode Standard very well. Particularly important cases are canonical equivalence, word boundaries, extended grapheme cluster boundaries, and loose matches. (For more information about boundary conditions, see UAX #29, Unicode Text Segmentation [UAX29].)

Level 2 support matches much more what user expectations are for sequences of Unicode characters. It is still locale-independent and easily implementable. However, for compatibility with Level 1, it is useful to have some sort of syntax that will turn Level 2 support on and off.

The features comprising Level 2 are not in order of importance. In particular, the most useful and highest priority features in practice are:

2.1 Canonical Equivalents

The equivalence relation for canonical equivalence is established by whether two strings are identical when normalized to NFD.

For most full-featured regular expression engines, it is quite difficult to match under canonical equivalence, which may involve reordering, splitting, or merging of characters. For example, all of the following sequences are canonically equivalent:

  1. o horn dot_below
    1. U 006F ( o ) LATIN SMALL LETTER O
    2. U 031B ( ◌̛ ) COMBINING HORN
    3. U 0323 ( ◌̣ ) COMBINING DOT BELOW
  2. o dot_below horn
    1. U 006F ( o ) LATIN SMALL LETTER O
    2. U 0323 ( ◌̣ ) COMBINING DOT BELOW
    3. U 031B ( ◌̛ ) COMBINING HORN
  3. o-horn dot_below
    1. U 01A1 ( ơ ) LATIN SMALL LETTER O WITH HORN
    2. U 0323 ( ◌̣ ) COMBINING DOT BELOW
  4. o-dot_below horn
    1. U 1ECD ( ọ ) LATIN SMALL LETTER O WITH DOT BELOW
    2. U 031B ( ◌̛ ) COMBINING HORN
  5. o-horn-dot_below
    1. U 1EE3 ( ợ ) LATIN SMALL LETTER O WITH HORN AND DOT BELOW

The regular expression pattern /o\u{31B}/ matches the first two characters of A, the first and third characters of B, the first character of C, part of the first character together with the third character of D, and part of the character in E.

In practice, regex APIs are not set up to match parts of characters or handle discontiguous selections. There are many other edge cases: a combining mark may come from some part of the pattern far removed from where the base character was, or may not explicitly be in the pattern at all. It is also unclear what /./ should match and how back references should work.

It is feasible, however, to construct patterns that will match against NFD (or NFKD) text. That can be done by:

  1. Putting the text to be matched into a defined normalization form (NFD or NFKD).
  2. Having the user design the regular expression pattern to match against that defined normalization form. For example, the pattern should contain no characters that would not occur in that normalization form, nor sequences that would not occur.
  3. Applying the matching algorithm on a code point by code point basis, as usual.

2.2 Extended Grapheme Clusters and Character Classes with Strings

One or more Unicode characters may make up what the user thinks of as a character. To avoid ambiguity with the computer use of the term character, this is called a grapheme cluster. For example, "G" acute-accent is a grapheme cluster: it is thought of as a single character by users, yet is actually represented by two Unicode characters. The Unicode Standard defines extended grapheme clusters that treat certain sequences as units, including Hangul syllables and base characters with combining marks. The precise definition is in UAX #29, Unicode Text Segmentation [UAX29]. However, the boundary definitions in CLDR are strongly recommended: they are more comprehensive than those defined in [UAX29] and include Indic extended grapheme clusters such as ksha.

RL2.2 Extended Grapheme Clusters and Character Classes with Strings
To meet this requirement, an implementation shall provide a mechanism for matching against an arbitrary extended grapheme cluster, Character Classes with Strings, and extended grapheme cluster boundaries.

For example, an implementation could interpret \X as matching any extended grapheme cluster, while interpreting "." as matching any single code point. It could interpret \b{g} as a zero-width match against any extended grapheme cluster boundary, and \B{g} as the complement of that.

More generally, it is useful to have zero width boundary detections for each of the different kinds of segment boundaries defined by Unicode ([UAX29] and [UAX14]). For example:

Syntax Zero-width Match at
\b{g} a Unicode extended grapheme cluster boundary
\b{w} a Unicode word boundary. Note that this is different than \b alone, which corresponds to \w and \W. See Annex C: Compatibility Properties.
\b{l} a Unicode line break boundary
\b{s} a Unicode sentence boundary

Thus \X is equivalent to . ?\b{g}; proceed the minimal number of characters (but at least one) to get to the next extended grapheme cluster boundary.

2.2.1 Character Classes with Strings

Regular expression engines should also provide some mechanism for easily matching against Character Classes with Strings, because they are more likely to match user expectations for many languages. One mechanism for doing that is to have explicit syntax for strings in Character Classes, as in the following addition to the syntax of Section 0.1.1 Character Classes:

Nonterminal Production Rule Comments & Constraints
ITEM := '\q{' LITERAL* ('|' LITERAL*)*'}' Adds to previous ITEM rules.
Represents one or more literal strings of characters.

The '|' separator is used to make an expression more readable. Some implementations may choose to drop the \q, although many will choose to retain it for backwards compatibility.

Compact Notation [a-z🧐\q{ch|sch|🇧🇪|🇧🇫|🇧🇬 }]
Equivalent Expanded Notation [a-z🧐\q{ch}\q{sch}\q{🇧🇪 }\q{🇧🇫 }\q{🇧🇬 }]

The following table shows examples of use of the \q syntax:

Expression Matches
[a-z\q{x\u{323}}] The characters a-z, and the string x with an under-dot (used in American Indian languages)
[a-z\q{aa}] The characters a-z, and the string aa (treated as a single character in Danish)
[a-z ñ \q{ch|ll|rr}] Some lowercase characters in traditional Spanish
[a-z \q{🧐|🇫🇷 }] Characters a-z and two emoji. Note that this is equivalent to [a-z 🧐\q{🇫🇷 }] because the first emoji is a single code point, while the second is two codepoints and thus requires the \q syntax. However, users of regex can not be expected to always know which sequences are single code points,

In implementing Character Classes with strings, the expression /[a-m \q{ch|chh|rr|} β-ξ]/ should behave as the alternation /(chh | ch | rr | [a-mβ-ξ] | )/. Note that such an alternation must have the multi-code point strings ordered as longest-first to work correctly in arbitrary regex engines, because some regex engines try the leftmost matching alternative first. Therefore it does not work to have shorter strings first. The exception is where those shorter strings are not initial substrings of longer strings.

String literals in character classes are especially useful in combination with a property of strings. String literals can be used to modify the property by removing exceptions. Such exceptions cannot be expressed by other means. The only workaround would be to hard-code the result in an alternation, creating a large expression that loses the automatic updates of properties. For example, the following could not be expressed with alternation, except by replacing the property by hard-coded current contents (that would get out of date):

[p\{RGI_Emoji}--[a-z🧐\q{ch|sch|🇧🇪|🇧🇫|🇧🇬 }]]

If the implementation supports empty alternations, such as (ab|[ac-m]|), then it can also handle empty strings: [\q{ab}[ac-m]\q{}].

Of course, such alternations can be optimized internally for speed and/or memory, such as (ab|[ac-m]|) → ((ab?)|[c-m]|).

Like properties of strings, complemented Character Classes with strings need to be handled specially: see Annex D: Resolving Character Classes with Strings and Complement.

2.3 Default Word Boundaries

RL2.3 Default Word Boundaries
To meet this requirement, an implementation shall provide a mechanism for matching Unicode default word boundaries.

The simple Level 1 support using simple <word_character> classes is only a very rough approximation of user word boundaries. A much better method takes into account more context than just a single pair of letters. A general algorithm can take care of character and word boundaries for most of the world's languages. For more information, see UAX #29, Unicode Text Segmentation [UAX29].

Note: Word boundaries and "soft" line-break boundaries (where one could break in line wrapping) are not generally the same; line breaking has a much more complex set of requirements to meet the typographic requirements of different languages. See UAX #14, Line Breaking Properties [UAX14] for more information. However, soft line breaks are not generally relevant to general regular expression engines.

A fine-grained approach to languages such as Chinese or Thai—languages that do not use spaces—requires information that is beyond the bounds of what a Level 2 algorithm can provide.

2.4 Default Case Conversion

RL2.4 Default Case Conversion
To meet this requirement, if an implementation provides for case conversions, then it shall provide at least the full, default Unicode case folding.

Previous versions of RL2.4 included full default Unicode case-insensitive matching. For most full-featured regular expression engines, it is quite difficult to match under code point equivalences that are not 1:1. For more discussion of this, see 1.5 Simple Loose Matches and 2.1 Canonical Equivalents. Thus that part of RL2.4 has been retracted.

Instead, it is recommended that implementations provide for full, default Unicode case conversion, allowing users to provide both patterns and target text that has been fully case folded. That allows for matches such as between U 00DF "ß" and the two characters "SS". Some implementations may choose to have a mixed solution, where they do full case matching on literals such as "Strauß", but simple case folding on character classes such as [ß].

To correctly implement case conversions, see [Case]. For ease of implementation, a complete case folding file is supplied at [CaseData]. Full case mappings use the data files [SpecialCasing] and [UData].

2.5 Name Properties

RL2.5 Name Properties
To meet this requirement, an implementation shall support individually named characters.

When using names in regular expressions, the data is supplied in both the Name (na) and Name_Alias properties in the UCD, as described in UAX #44, Unicode Character Database [UAX44], or computed as in the case of CJK Ideographs or Hangul Syllables. Name matching rules follow Matching Rules from [UAX44#UAX44-LM2].

The following provides examples of usage:

Syntax Set Note
\p{name=ZERO WIDTH NO-BREAK SPACE} [\u{FEFF}] using the Name property
\p{name=zerowidthno breakspace} [\u{FEFF}] using the Name property, and Matching Rules [UAX44]
\p{name=BYTE ORDER MARK} [\u{FEFF}] using the Name_Alias property
\p{name=BOM} [\u{FEFF}] using the Name_Alias property (a second value)
\p{name=HANGUL SYLLABLE GAG} [\u{AC01}] with a computed name
\p{name=BEL} [\u{7}] the control character
\p{name=BELL} [\u{1F514} the graphic symbol 🔔

Certain code points are not assigned names or name aliases in the standard. With the exception of "reserved", these should be given names based on Code Point Label Tags table in [UAX44], as shown in the following examples:

Syntax Set Note
\p{name=private-use-E000} [\u{E000}]  
\p{name=surrogate-D800} [\u{D800}] would only apply to isolated surrogate code points
\p{name=noncharacter-FDD0} [\u{FDD0}]  
\p{name=control-0007} [\u{7}]  

Characters with the <reserved> tag in the Code Point Label Tags table of [UAX44] are excluded: the syntax \p{reserved-058F} would mean that the code point U 058F is unassigned. While this code point was unassigned in Unicode 6.0, it is assigned in Unicode 6.1 and thus no longer "reserved".

Implementers may add aliases beyond those recognized in the UCD. They must be aware that such additional aliases may cause problems if they collide with future character names or aliases. For example, implementations that used the name "BELL" for U 0007 broke when the new character U 1F514 ( 🔔 ) BELL was introduced.

Previous versions of this specification recommended supporting ISO control names from the Unicode 1.0 name field. These names are now covered by the name aliases (see NameAliases.txt). In four cases, the name field included both the ISO control name as well as an abbreviation in parentheses.

U 000A LINE FEED (LF)
U 000C FORM FEED (FF)
U 000D CARRIAGE RETURN (CR)
U 0085 NEXT LINE (NEL)

These abbreviations were intended as alternate aliases, not as part of the name, but the documentation did not make this sufficiently clear. As a result, some implementations supported the entire field as a name. Those implementations might benefit from continuing to support them for compatibility. Beyond that, their use is not recommended.

The \p{name=...} syntax can be used meaningfully with wildcards (see Section 2.6 Wildcards in Property Values). For example, in Unicode 6.1, \p{name=/ALIEN/} would include a set of two characters:

The namespace for the \p{name=...} syntax is the namespace for character names plus name aliases.

2.5.1 Individually Named Characters

The following provides syntax for specifying a code point by supplying the precise name. This syntax specifies a single code point, which can thus be used wherever \u{...} can be used. Note that \N and \p{name} may be extended to match sequences if NamedSequences.txt is supported as in Section 2.7 Full Properties.

Nonterminal Production Rule Comments & Constraints
LITERAL := '\N{' ID_CHAR '}' Adds to previous LITERAL rules.
Constraint: ID_CHAR = valid Unicode name or alias

The \N syntax is related to the syntax \p{name=...}, but there are important distinctions:

  1. \N matches a single character, while \p matches a set of characters (when using wildcards).
  2. The \p{name=<character_name>} may silently fail, if no character exists with that name. The \N syntax should instead cause a syntax error for an undefined name.

The namespace for the \N{name=...} syntax is the namespace for character names plus name aliases. Name matching rules follow Matching Rules from [UAX44#UAX44-LM2].

The following table gives examples of the \N syntax:

Expression Equivalent to
\N{WHITE SMILING FACE} \u{263A}
\N{whitesmilingface}
\N{GREEK SMALL LETTER ALPHA} \u{3B1}
\N{FORM FEED} \u{C}
\N{SHAVIAN LETTER PEEP} \u{10450}
[\N{GREEK SMALL LETTER ALPHA}-\N{GREEK SMALL LETTER BETA}] [\u{3B1}-\u{3B2}]

2.6 Wildcards in Property Values

RL2.6 Wildcards in Property Values
To meet this requirement, an implementation shall support wildcards in Unicode property values.

Instead of a single property value, this feature allows the use of a regular expression to pick out a set of characters (or strings) based on whether the property values match the regular expression. The regular expression must support at least wildcards; other regular expressions features are recommended but optional.

Nonterminal Production Rule Comments & Constraints
PROP_VALUE := ‘/’ <regex expression> ‘/’
\p{PROP_NAME=/<regex expression>/} is set of all characters (or strings) whose property value matches the regular expression. See below for examples.
  := ‘@’ PROP_NAME ‘@’ \p{PROP_NAME1=@PROP_NAME2@} is set of all characters (or strings) whose property value for PROP_NAME1 is identical to the property value for PROP_NAME2. See below for examples.

Notes:

The @…@ syntax is used to compare property values, and is primarily intended for string properties. It allows for expressions such as [:^toNFKC_Casefold=@toNFKC@:], which expresses the set of all and only those code points CP such that toNFKC_Casefold(CP) = toNFKC(CP). The value identity can be used in this context. For example, \p{toLowercase≠@identity@} expresses the set of all characters that are changed by the toLowercase mapping.

The following table shows examples of the use of wildcards.

Expression Matched Set
Characters whose NFD form contains a "b" (U 0062) in the value:
\p{toNfd=/b/} U 0062 ( b ) LATIN SMALL LETTER B
U 1E03 ( ḃ ) LATIN SMALL LETTER B WITH DOT ABOVE
U 1E05 ( ḅ ) LATIN SMALL LETTER B WITH DOT BELOW
U 1E07 ( ḇ ) LATIN SMALL LETTER B WITH LINE BELOW
Characters with names containing "SMILING FACE" or "GRINNING FACE":
\p{name=/(SMILING|GRINNING) FACE/} U 263A ( ☺️ ) WHITE SMILING FACE
U 263B ( ☻ ) BLACK SMILING FACE
U 1F601 ( 😁 ) GRINNING FACE WITH SMILING EYES
U 1F603 ( 😃 ) SMILING FACE WITH OPEN MOUTH
U 1F604 ( 😄 ) SMILING FACE WITH OPEN MOUTH AND SMILING EYES
U 1F605 ( 😅 ) SMILING FACE WITH OPEN MOUTH AND COLD SWEAT
U 1F606 ( 😆 ) SMILING FACE WITH OPEN MOUTH AND TIGHTLY-CLOSED EYES
U 1F607 ( 😇 ) SMILING FACE WITH HALO
U 1F608 ( 😈 ) SMILING FACE WITH HORNS
U 1F60A ( 😊 ) SMILING FACE WITH SMILING EYES
U 1F60D ( 😍 ) SMILING FACE WITH HEART-SHAPED EYES
U 1F60E ( 😎 ) SMILING FACE WITH SUNGLASSES
U 1F642 ( 🙂 ) SLIGHTLY SMILING FACE
U 1F929 ( 🤩 ) GRINNING FACE WITH STAR EYES
U 1F92A ( 🤪 ) GRINNING FACE WITH ONE LARGE AND ONE SMALL EYE
U 1F92D ( 🤭 ) SMILING FACE WITH SMILING EYES AND HAND COVERING MOUTH
U 1F970 ( 🥰 ) SMILING FACE WITH SMILING EYES AND THREE HEARTS
Characters with names containing "VARIATION" or "VARIANT":
\p{name=/VARIA(TION|NT)/} U 180B (  ) MONGOLIAN FREE VARIATION SELECTOR ONE
… U 180D (  ) MONGOLIAN FREE VARIATION SELECTOR THREE
U 299C ( ⦜ ) RIGHT ANGLE VARIANT WITH SQUARE
U 303E ( 〾 ) IDEOGRAPHIC VARIATION INDICATOR
U FE00 (  ) VARIATION SELECTOR-1
… U FE0F (  ) VARIATION SELECTOR-16
U 121AE ( 𒆮 ) CUNEIFORM SIGN KU4 VARIANT FORM
U 12425 ( 𒐥 ) CUNEIFORM NUMERIC SIGN THREE SHAR2 VARIANT FORM
U 1242F ( 𒐯 ) CUNEIFORM NUMERIC SIGN THREE SHARU VARIANT FORM
U 12437 ( 𒐷 ) CUNEIFORM NUMERIC SIGN THREE BURU VARIANT FORM
U 1243A ( 𒐺 ) CUNEIFORM NUMERIC SIGN THREE VARIANT FORM ESH16
… U 12449 ( 𒑉 ) CUNEIFORM NUMERIC SIGN NINE VARIANT FORM ILIMMU A
U 12453 ( 𒑓 ) CUNEIFORM NUMERIC SIGN FOUR BAN2 VARIANT FORM
U 12455 ( 𒑕 ) CUNEIFORM NUMERIC SIGN FIVE BAN2 VARIANT FORM
U 1245D ( 𒑝 ) CUNEIFORM NUMERIC SIGN ONE THIRD VARIANT FORM A
U 1245E ( 𒑞 ) CUNEIFORM NUMERIC SIGN TWO THIRDS VARIANT FORM A
U E0100 (  ) VARIATION SELECTOR-17
… U E01EF (  ) VARIATION SELECTOR-256
Characters in the Letterlike symbol block with different toLowercase values:
\p{Block=Letterlike Symbols}
--\p{toLowercase=@identity@}
U 2126 ( Ω ) OHM SIGN
U 212A ( K ) KELVIN SIGN
U 212B ( Å ) ANGSTROM SIGN
U 2132 ( Ⅎ ) TURNED CAPITAL F
Greek characters whose toLowercase and toUppercase values are different, excluding decomposable characters
\p{script=Grek}
--\p{toLowercase=@toUppercase@}
--\p{nfkdqc=n}
[αΑ βΒ γΓ δΔ εΕ ϝϜ ͷͶ ϛϚ ζΖ ͱͰ ηΗ θΘ ιΙ ϳͿ κΚ ϗϏ λΛ μΜ νΝ ξΞ οΟ πΠ ϻϺ ϟϞ ϙϘ ρΡ σςΣ ͼϾ ͻϽ ͽϿ τΤ υΥ φΦ χΧ ψΨ ωΩ ϡϠ ͳͲ ϸϷ]

See Section 0.1.2 Property Examples for information about updates to the contents of a literal set across versions.

The lists in the examples above were extracted on the basis of Unicode 5.0; different Unicode versions may produce different results.

The following table some additional samples, illustrating various sets. A click on the link will use the online Unicode utilities on the Unicode website to show the contents of the sets. Note that these online utilities curently use single-letter operations.

Expression Description
[[:name=/CJK/:]-[:ideographic:]] The set of all characters with names that contain CJK that are not Ideographic
[:name=/\bDOT$/:] The set of all characters with names that end with the word DOT
[:block=/(?i)arab/:] The set of all characters in blocks that contain the sequence of letters "arab" (case-insensitive)
[:toNFKC=/\./:] the set of all characters with toNFKC values that contain a literal period

2.7 Full Properties

RL2.7 Full Properties
To meet this requirement, an implementation shall support all of the properties listed below that are in the supported version of the Unicode Standard (or Unicode Technical Standard, respectively), with values that match the Unicode definitions for that version.

To meet requirement RL2.7, the implementation must satisfy the Unicode definition of the properties for the supported version of Unicode (or Unicode Technical Standard, respectively), rather than other possible definitions. However, the names used by the implementation for these properties may differ from the formal Unicode names for the properties. For example, if a regex engine already has a property called "Alphabetic", for backwards compatibility it may need to use a distinct name, such as "Unicode_Alphabetic", for the corresponding property listed in RL1.2.

The list excludes provisional, contributory, obsolete, and deprecated properties. It also excludes specific properties: Unicode_1_Name, Unicode_Radical_Stroke, and the Unihan properties. The properties shown in the table with a gray background are covered by RL1.2 Properties. For more information on properties, see UAX #44, Unicode Character Database [UAX44].

Property Domains: All listed properties marked with * are properties of strings. All other listed properties are properties of code points. The domain of these properties (strings vs code points) will not change in subsequent versions.

General Case Shaping and Rendering
Name (Name_Alias) Uppercase Join_Control
Block Lowercase Joining_Group
Age Simple_Lowercase_Mapping Joining_Type
General_Category Simple_Titlecase_Mapping Vertical_Orientation
Script (Script_Extensions) Simple_Uppercase_Mapping Line_Break
White_Space Simple_Case_Folding Grapheme_Cluster_Break
Alphabetic Soft_Dotted Sentence_Break
Hangul_Syllable_Type Cased Word_Break
Noncharacter_Code_Point Case_Ignorable East_Asian_Width
Default_Ignorable_Code_Point Changes_When_Lowercased Prepended_Concatenation_Mark
Deprecated Changes_When_Uppercased  
Logical_Order_Exception Changes_When_Titlecased Bidirectional
Variation_Selector Changes_When_Casefolded Bidi_Class
  Changes_When_Casemapped Bidi_Control
Numeric   Bidi_Mirrored
Numeric_Value Normalization Bidi_Mirroring_Glyph
Numeric_Type Canonical_Combining_Class Bidi_Paired_Bracket
Hex_Digit Decomposition_Type Bidi_Paired_Bracket_Type
ASCII_Hex_Digit NFC_Quick_Check  
  NFKC_Quick_Check Miscellaneous
Identifiers NFD_Quick_Check Math
ID_Continue NFKD_Quick_Check Quotation_Mark
ID_Start NFKC_Casefold Dash
XID_Continue Changes_When_NFKC_Casefolded Sentence_Terminal
XID_Start   Terminal_Punctuation
Pattern_Syntax Emoji Diacritic
Pattern_White_Space Emoji Extender
Identifier_Status Emoji_Presentation Grapheme_Base
Identifier_Type Emoji_Modifier Grapheme_Extend
  Emoji_Modifier_Base Regional_Indicator
CJK Emoji_Component  
Ideographic Extended_Pictographic  
Unified_Ideograph Basic_Emoji*  
Radical Emoji_Keycap_Sequence*  
IDS_Binary_Operator RGI_Emoji_Modifier_Sequence*  
IDS_Trinary_Operator RGI_Emoji_Flag_Sequence*  
Equivalent_Unified_Ideograph RGI_Emoji_Tag_Sequence*  
  RGI_Emoji_ZWJ_Sequence*  
  RGI_Emoji*  

The properties that are not in the UCD provide property metadata in their data file headers that can be used to support property syntax. That information is used to match and validate properties and property values for syntax such as \p{pname=pvalue}, so that they can be used in the same way as UCD properties. These include the Identifier_Status and Identifier_Type, and the Emoji sequence properties.

The Name and Name_Alias properties are used in \p{name=…} and \N{…}. The data in NamedSequences.txt is also used in \N{…}. For more information see Section 2.5, Name Properties. The Script and Script_Extensions properties are used in \p{scx=…}. For more information, see Section 1.2.6, Script and Script Extensions Properties.

To test whether a string is in a normalization format such as NFC requires special code. However, there are "quick-check" properties that can detect whether characters are allowed in a normalization format at all. Those can be used for cases like the following, which removes characters that cannot occur in NFC: [\p{Alphabetic}--\p{NFC_Quick_Check=No}]

The Emoji properties can be used to precisely parse text for valid emoji of different kinds, while the Equivalent_Unified_Ideograph can be used to find radicals for unified ideographs (or vice versa): \p{Equivalent_Unified_Ideograph=⼚} matches [⼚⺁厂].

See also 2.5 Name Properties and 2.6 Wildcards in Property Values.

2.8 Optional Properties

Implementations may also add other regular expression properties based on Unicode data that are not listed above. Some possible candidates include the following. These are optional, and are not required by any conformance clauses in this document, nor is the example syntax required.

Source Example Description
[UTS46] [\p{UTS46_Status=deviation}
&&\p{IDNA2008_Status=Valid}
Characters valid under both UTS46 and IDNA2008
[UTS35] \p{Exemplar_Main=fil} The main exemplar characters for Filipino:
[a-nñ \q{ng} o-z]
[UTS10] \p{Collation_Primary_el=η} Characters that sort as 'η' on a primary level in Greek according to CLDR:
[η 𝞰 𝛈 𝜂 𝜼 𝝶 Η 𝜢 𝚮 𝛨 𝝜 𝞖 ἠ Ἠ ἤ Ἤ ᾔ ᾜ ἢ Ἢ ᾒ ᾚ ἦ Ἦ ᾖ ᾞ ᾐ ᾘ ἡ Ἡ ἥ Ἥ ᾕ ᾝ ἣ Ἣ ᾓ ᾛ ἧ Ἧ ᾗ ᾟ ᾑ ᾙ ή ή Ή Ή ῄ ὴ Ὴ ῂ ῆ ῇ ῃ ῌ]
Named­
Sequences.txt
\p{Named_Sequence=TAMIL CONSONANT K}
The matching named sequence:
\u{0B95 0BCD}
These should match any name according to the Name property, NamedAliases.txt, and NamedSequences.txt, so that \p{Named_Sequence=X} is a drop-in for \p{Name=X}.
Standardized­
Variants.txt
\p{Standardized_Variant} The set of all standardized variant sequences.
UCD \p{Indic_Positional_Category=Left_And_Right} See UCD description
UCD \p{Indic_Syllabic_Category=Avagraha} See UCD description
  \p{identity=a} The identity property maps each code point to itself. For example, this expression is a character class containing the one character ‘a’. It is primarily useful in wildcard property values.

See Section 0.1.2 Property Examples for information about updates to the contents of a literal set across versions.


3 Tailored Support: Level 3

This section has been retracted. It last appeared in version 19.


Annex A: Character Blocks

The Block property from the Unicode Character Database can be a useful property for quickly describing a set of Unicode characters. It assigns a name to segments of the Unicode codepoint space; for example, [\u{370}-\u{3FF}] is the Greek block.

However, block names need to be used with discretion; they are very easy to misuse because they only supply a very coarse view of the Unicode character allocation. For example:

The following table illustrates the mismatch between writing systems and blocks. These are only examples; this table is not a complete analysis. It also does not include common punctuation used with all of these writing systems.

Writing Systems Versus Blocks

Writing System Associated Blocks
Latin Basic Latin, Latin-1 Supplement, Latin Extended-A, Latin Extended-B, Latin Extended-C, Latin Extended-D, Latin Extended-E, Latin Extended Additional, Combining Diacritical Marks
Greek Greek, Greek Extended, Combining Diacritical Marks
Arabic Arabic, Arabic Supplement, Arabic Extended-A, Arabic Presentation Forms-A, Arabic Presentation Forms-B
Korean Hangul Jamo, Hangul Jamo Extended-A, Hangul Jamo Extended-B, Hangul Compatibility Jamo, Hangul Syllables, CJK Unified Ideographs, CJK Unified Ideographs Extension A, CJK Compatibility Ideographs, CJK Compatibility Forms, Enclosed CJK Letters and Months, Small Form Variants
Yi Yi Syllables, Yi Radicals
Chinese CJK Unified Ideographs, CJK Unified Ideographs Extension A, CJK Unified Ideographs Extension B, CJK Unified Ideographs Extension C, CJK Unified Ideographs Extension D, CJK Unified Ideographs Extension E, CJK Compatibility Ideographs, CJK Compatibility Ideographs Supplement, CJK Compatibility Forms, Kangxi Radicals, CJK Radicals Supplement, Enclosed CJK Letters and Months, Small Form Variants, Bopomofo, Bopomofo Extended, CJK Unified Ideographs Extension F, CJK Unified Ideographs Extension G, ...

For the above reasons, Script values are generally preferred to Block values. Even there, they should be used in accordance with the guidelines in UAX #24, Unicode Script Property [UAX24].

Annex B: Sample Collation Grapheme Cluster Code

This annex was retracted at the same time that Level 3 was retracted.

Annex C: Compatibility Properties

The following table shows recommended assignments for compatibility property names, for use in Regular Expressions. The standard recommendation is shown in the column labeled "Standard"; applications should use this definition wherever possible. If populated with a different value, the column labeled "POSIX Compatible" shows modifications to the standard recommendation required to meet the formal requirements of [POSIX], and also to maintain (as much as possible) compatibility with the POSIX usage in practice. That modification involves some compromises, because POSIX does not have as fine-grained a set of character properties as in the Unicode Standard, and also has some additional constraints. So, for example, POSIX does not allow more than 20 characters to be categorized as digits, whereas there are many more than 20 digit characters in Unicode.

Compatibility Property Names

Property Standard POSIX Compatible Comments
alpha \p{Alphabetic} Alphabetic includes more than gc = Letter. Note that combining marks (Me, Mn, Mc) are required for words of many languages. While they could be applied to non-alphabetics, their principal use is on alphabetics. See DerivedCoreProperties for Alphabetic. See also DerivedGeneralCategory. Alphabetic should not be used as an approximation for word boundaries: see word below.
lower Lowercase includes more than gc = Lowercase_Letter (Ll). See DerivedCoreProperties.
upper \p{Uppercase} Uppercase includes more than gc = Uppercase_Letter (Lu).
punct \p{gc=Punctuation} \p{gc=Punctuation}
\p{gc=Symbol}
-- \p{alpha}
POSIX adds symbols. Not recommended generally, due to the confusion of having punct include non-punctuation marks.
digit (\d) \p{gc=Decimal_Number} [0..9] Non-decimal numbers (like Roman numerals) are normally excluded. In U4.0 , the recommended column is the same as gc = Decimal_Number (Nd). See DerivedNumericType.
xdigit
\p{gc=Decimal_Number}
\p{Hex_Digit}
[0-9 A-F a-f] Hex_Digit contains 0-9 A-F, fullwidth and halfwidth, upper and lowercase.
alnum \p{alpha}
\p{digit}
Simple combination of other properties
space (\s) \p{Whitespace} See PropList for the definition of Whitespace.
blank \p{gc=Space_Separator}
\N{CHARACTER TABULATION}
"horizontal" whitespace: space separators plus U 0009 tab. Engines implementing older versions of the Unicode Standard may need to use the longer formulation:
\p{Whitespace} --
[\N{LF} \N{VT} \N{FF} \N{CR} \N{NEL} \p{gc=Line_Separator} \p{gc=Paragraph_Separator}]
cntrl \p{gc=Control} The characters in \p{gc=Format} share some, but not all aspects of control characters. Many format characters are required in the representation of plain text.
graph Warning: the set shown here is defined by excluding space, controls, and so on with ^.
print \p{graph}
\p{blank}
-- \p{cntrl}
Includes graph and space-like characters.
word (\w) \p{alpha}
\p{gc=Mark}
\p{digit}
\p{gc=Connector_Punctuation}
\p{Join_Control}
n/a This is only an approximation to Word Boundaries (see b below). The Connector Punctuation is added in for programming language identifiers, thus adding "_" and similar characters.
\X Extended Grapheme Clusters n/a See [UAX29]. Other functions are used for programming language identifier boundaries.
\b Default Word Boundaries n/a If there is a requirement that \b align with \w, then it would use the approximation above instead. See [UAX29]. Note that different functions are used for programming language identifier boundaries. See also [UAX31].

Annex D: Resolving Character Classes with Strings and Complement

The operators and contents of a character class correspond to a set of strings. With full complement, the normal set-theoretic equivalences are maintained:

See https://en.wikipedia.org/wiki/Set_(mathematics)#Basic_operations for more examples. (Note that that page uses one of the alternate notations for complement: A′.)

However, the full complement turns a finite set into an infinite set. This is a problem for regular expressions. If [^a] were defined to be the full complement of [a], then it would include every string except for 'a'. Matching a finite set of strings can be represented in regular expression implementations using alternation, in a straightforward way. Matching an infinite set of strings fails badly: [^a] would match "ab", since the string "ab" is not in [a]. So [^a] cannot be interpreted as full complement, since that would break well-established behavior.

This is not a problem for the other set operations: A ∪ B, A ∩ B, A \ B, A ⊖ B. None of them can produce an infinite set from finite sets. Moreover, the operator for full complement of strings is not necessary for regular expressions: that is, with the operations A ∪ B, A ∩ B, A \ B, A ⊖ B, all combinations of character classes resulting in a finite set of strings can be formed.

For this reason, [^...] remains as code point complement even when other regular expression syntax is extended to allow for strings. The normal set-theoretic equivalences still hold for all operations, except that those involving code point complement are qualified, so:

These can be derived by converting ∁A to the equivalent ( ℙ \ A ). For example, ∁(∁(A)) = ℙ \ (ℙ \ A) = ℙ ∩ A.

Note: Some implementations may choose to throw exceptions when complement is applied to an expression that contains (or could contain) strings. For those implementations, [^A] would not always be equivalent to [\p{any}--[A]], since the former could throw an exception, while the latter would always resolve to the code point complement.

However, the full complement of a Character Class with strings or of a property of strings could be allowed internal to a character class expression as long as the fully resolved version of the outermost expression does not contain an infinite number of strings. If an implementation is to support Full Complement, then the following section describes how this can be done. First is to provide an additional operator for Full Complement:

Nonterminal Production Rule Comments & Constraints
ITEM := '[' FULL_COMPLEMENT CHARACTER_CLASS ']' Adds to ITEM definition above. Forms the full complement:
𝕊 ∖ CHARACTER_CLASS
FULL_COMPLEMENT := '!!'  

For example, suppose that C is a Character Class without strings or property of characters, and S is a Character Class with strings or property of strings.

A narrowed set of single characters can always be represented by intersecting with the set of single characters, such as [\p{Basic_Emoji}&&\p{any}].

The following describes how a boolean expression can be resolved to a Character Class with only characters, a Character Class with strings, or a full-complemented Character Class with only characters. As usual, this is a logical expression of the process; implementations can optimize as long as they get the same results.

When incrementally parsing and building a resolved boolean expression, the process can be analyzed in terms of a series of core operations. In parsing Character Classes, the intermediate objects are logically enhanced sets of strings, such as A and B. The enhancement is the addition of a flag to indicate whether the internal set is full-complemented or not. The symbol ➕ stands for the flag value = normal. The symbol ➖  stands for the flag value = full-complemented. Thus:

➕ means that the internal set is treated normally; the enhanced set is the same as the internal set.

➖ means that the internal set is full-complemented; the logical contents of the enhanced set are every possible string except those in the internal set. Where 𝕊 stands for the set of all strings, and {α, β} is the internal set, then the semantics is: (𝕊 ∖ {α, β}), that is, the set of all strings except for {α, β}.

When the flag is full-complemented, adding or removing from the enhanced set has the reverse effect on the internal set.

For brevity in the table below, ∁𝕊{α, β} is used to express (𝕊 ∖ {α, β}).

While logically the enhanced set can contain an infinite set of strings, internally there is only ever a finite set.

Creation and Unary Operations

[!!A] where A is an enhanced set with (set, flag) results in the flag being toggled: ➕ ⇔ ➖

Binary Operations

The table shows how to process binary operations on enhanced sets, with each result being the internal set plus flag. Examples are provided with two overlapping sets: A = {α, β} and B = {β, γ}.

Syntax Flag of A Flag of B Result Set Flag of Result Example Input Example Result
A || B
(union)
setA ∪ setB {α, β} ∪ {β, γ} {α, β, γ}
setB ∖ setA {α, β} ∪ ∁{β, γ} ∁{γ}
setA ∖ setB ∁{α, β} ∪ {β, γ} ∁{α}
setA ∩ setB ∁{α, β} ∪ ∁{β, γ} ∁{β}
 
A && B
(intersection)
setA ∩ setB {α, β} ∩ {β, γ} {β}
setA ∖ setB {α, β} ∩ ∁{β, γ} {α}
setB ∖ setA ∁{α, β} ∩ {β, γ} {γ}
setA ∪ setB ∁{α, β} ∩ ∁{β, γ} {α, β, γ}
 
A -- B
(set difference)
setA ∖ setB {α, β} ∖ {β, γ} {α}
setA ∩ setB {α, β} ∖ ∁{β, γ} {β}
setA ∪ setB ∁{α, β} ∖ {β, γ} ∁{α, β, γ}
setB ∖ setA ∁{α, β} ∖ ∁{β, γ} {γ}
 
A ~~ B
(symmetric difference)
setA ∖ setB {α, β} ⊖ {β, γ} {α, γ}
setA ∩ setB {α, β} ⊖ ∁{β, γ} ∁{α, γ}
setA ∪ setB ∁{α, β} ⊖ {β, γ} ∁{α, γ}
setB ∖ setA ∁{α, β} ⊖ ∁{β, γ} {α, γ}

The normal set equivalences hold, such as ∁𝕊(A ∪ B) = ∁𝕊A ∩ ∁𝕊B

Annex E: Notation for Properties of Strings

Properties of strings are properties that can apply to, or match, sequences of two or more characters (in addition to single characters). This is in contrast to the more common case of properties of characters, which are functions of individual code points only. Those properties marked with an asterisk in the Full Properties table are properties of strings. See, for example, Basic_Emoji.

The preferred notation for properties of strings is \p{Property_Name}, the same as for the traditional properties of characters. For regular expressions, properties of strings may appear both within and outside of character class expressions. As described in Annex D, some character class expressions are invalid when they contain properties of strings. Detection of such invalid expressions should happen early, when the regular expression is first compiled or processed.

Implementations that are constrained in that they do not support strings in character classes may use \m{Property_Name} as an alternate notation for properties of strings appearing outside of character class expressions. However:

Annex F. Parsing Character Classes

It is reasonably straightforward to build a parser for Character Classes. While there are many ways to do this, the following describes one example of a logical process for building such a parser. Implementations can use optimized code, such as a DFA (Deterministic Finite Automaton) for processing.

Storage

The description uses Java syntax to illustrate the code, but of course would be expressed in other programming languages. At the core is a class (here called CharacterClass) that stores the information that is being built, typically a set of strings optimized for compact storage of ranges of characters, such as ICU’s UnicodeSet (C ).

The methods needed are the following:

Method Meaning
CharacterClass create(); A = {}
void addAll(CharacterClass other); A = A ∪ other
void retainAll(CharacterClass other); A = A ∩ other
void removeAll(CharacterClass other); A = A ∖ other
void symmetricDiffAll(CharacterClass other); A = A ⊖ other
void add(int cp); A = A ∪ {cp}
void addRange(int cpStart, int cpEnd); A = A ∪ {cpStart .. cpEnd}
void addString(String stringToAdd); A = A ∪ {stringToAdd}
void codePointComplement(); A = ∁A
void setToProperty(String propertyString); A = propertySet

Building

At the top level a method parseCharacterClass can recognize and branch on ‘\p{’, ‘\P{’, ‘[’, and ‘[^’ . For ‘\p{’ and ‘\P{’, it calls a parseProperty method that parses up to an unescaped ‘}’, and returns a set based on Unicode properties. See RL1.2 Properties, 2.7 Full Properties, RL2.7 Full Properties, and 2.8 Optional Properties.

For ‘[’, and ‘[^’, it calls a parseSequence method that parses out items, stopping when it hits ‘]’. The type of each item can be determined by the initial characters. There is a special check for ‘-’ so that it can be interpreted according to context. The targetSet is set to the first item. All successive items at that level are combined with the targetSet, according to the specified operation (union, intersection, etc.). Note that other binding/precedence options would require somewhat more complicated parsing.

For the Character Class item, a recursive call is made on the parseCharacterClass method. The other initial characters that are branched on are ‘\u{’, ‘\u’, ‘\q{’, ‘\N{’, ‘\’, the operators, and literal and escaped characters.

Examples

In the following examples, ➗  is a cursor marking how the parsing progresses. For brevity, intermediate steps that only change state are omitted. The two examples are the same, except that in the right-hand example the second and third character classes are grouped.

Input Action Result
➗[[abc] -- [bcd] && [c-e]] A = create() A = []
[[a➗bc] -- [bcd] && [c-e]] A.add('a') A = [a]
[[ab➗c] -- [bcd] && [c-e]] A.add('b') A = [ab]
[[abc➗] -- [bcd] && [c-e]] A.add('c') A = [a-c]
[[abc] -- ➗[bcd] && [c-e]] B = create() A = [a-c]
[[abc] -- [b➗cd] && [c-e]] B.add('b')  
[[abc] -- [bc➗d] && [c-e]]  B.add('c') B = [b-c]
[[abc] -- [bcd➗] && [c-e]]  B.add('d') B = [b-d]
[[abc] -- [bcd]➗ && [c-e]]  A.removeAll(B) A = [a]
[[abc] -- [bcd] && ➗[c-e]] B.clear() B = []
[[abc] -- [[bcd] && [c➗-e]]] B.add('c') B = [c]
[[abc] -- [[bcd] && [c-e➗]]] B.addRange('d', 'e') B = [c-e]
[[abc] -- [[bcd] && [c-e]➗]]  A.retainAll(C) A = []
     
Input Action Result
➗[[abc] -- [[bcd] && [c-e]]] A = create() A = []
[[a➗bc] -- [[bcd] && [c-e]]] A.add('a') A = [a]
[[ab➗c] -- [[bcd] && [c-e]]] A.add('b') A = [ab]
[[abc➗] -- [[bcd] && [c-e]]] A.add('c') A = [a-c]
[[abc] -- ➗[[bcd] && [c-e]]] B = create() A = [a-c]
[[abc] -- [[b➗cd] && [c-e]]] B.add('b')  
[[abc] -- [[bc➗d] && [c-e]]]  B.add('c') B = [b-d]
[[abc] -- [[bcd➗] && [c-e]]]  B.add('d') B = [b-d]
[[abc] -- [[bcd]➗ && [c-e]]]    
[[abc] -- [[bcd] && ➗[c-e]]] C = create() C = []
[[abc] -- [[bcd] && [c➗-e]]] C.add('c') C = [c]
[[abc] -- [[bcd] && [c-e➗]]] C.addRange('d', 'e') C = [c-e]
[[abc] -- [[bcd] && [c-e]➗]]  B.retainAll(C) B = [cd]
[[abc] -- [[bcd] && [c-e]]]➗ A.removeAll(B) A = [ab]

References

[Case] Section 3.13, Default Case Algorithms in [Unicode]
[CaseData] https://www.unicode.org/Public/UCD/latest/ucd/CaseFolding.txt
[Friedl] Jeffrey Friedl, "Mastering Regular Expressions", 2nd Edition 2002, O'Reilly and Associates, ISBN 0-596-00289-0
[Glossary] Unicode Glossary
https://www.unicode.org/glossary/

For explanations of terminology used in this and other documents.
[Perl] https://perldoc.perl.org/
See especially:
https://perldoc.perl.org/charnames.html
https://perldoc.perl.org/perlre.html
https://perldoc.perl.org/perluniintro.html
https://perldoc.perl.org/perlunicode.html
[POSIX] The Open Group Base Specifications Issue 6, IEEE Std 1003.1, 2004 Edition, "Locale" chapter
https://pubs.opengroup.org/onlinepubs/009695399/basedefs/xbd_chap07.html
[Prop] https://www.unicode.org/Public/UCD/latest/ucd/PropertyAliases.txt
[PropValue] https://www.unicode.org/Public/UCD/latest/ucd/PropertyValueAliases.txt
[ScriptData] https://www.unicode.org/Public/UCD/latest/ucd/Scripts.txt
[SpecialCasing] https://www.unicode.org/Public/UCD/latest/ucd/SpecialCasing.txt
[UAX14] UAX #14, Unicode Line Breaking Algorithm
https://www.unicode.org/reports/tr14/
[UAX15] UAX #15, Unicode Normalization Forms
https://www.unicode.org/reports/tr15/
[UAX24] UAX #24, Unicode Script Property
https://www.unicode.org/reports/tr24/
[UAX29] UAX #29, Unicode Text Segmentation
https://www.unicode.org/reports/tr29/
[UAX31] UAX #31, Unicode Identifier and Pattern Syntax
https://www.unicode.org/reports/tr31/
[UAX38] UAX #38, Unicode Han Database (Unihan)
https://www.unicode.org/reports/tr38/
[UAX44] UAX #44, Unicode Character Database
https://www.unicode.org/reports/tr44/
[UData] https://www.unicode.org/Public/UCD/latest/ucd/UnicodeData.txt
[Unicode] The Unicode Standard
For the latest version, see:
https://www.unicode.org/versions/latest/
[UTR50] UTR #50, Unicode Vertical Text Layout
https://www.unicode.org/reports/tr50/
[UTR51] UTR #51, Unicode Emoji
https://www.unicode.org/reports/tr51/
[UTS10] UTS #10, Unicode Collation Algorithm (UCA)
https://www.unicode.org/reports/tr10/
[UTS35] UTS #35, Unicode Locale Data Markup Language (LDML)
https://www.unicode.org/reports/tr35/
[UTS39] UTS #39, Unicode Security Mechanisms
https://www.unicode.org/reports/tr39/
[UTS46] UTS #46, Unicode IDNA Compatibility Processing
https://www.unicode.org/reports/tr46/

Acknowledgments

Mark Davis created the initial version of this annex and maintains the text, with significant contributions from Andy Heninger. Andy also served as co-editor for many years.

Thanks to Julie Allen, Mathias Bynens,Tom Christiansen, David Corbett, Michael D’Errico, Asmus Freytag, Jeffrey Friedl, Norbert Lindenberg, Peter Linsley, Alan Liu, Kent Karlsson, Jarkko Hietaniemi, Ivan Panchenko, Michael Saboff, Gurusamy Sarathy, Markus Scherer, Xueming Shen, Henry Spencer, Kento Tamura, Philippe Verdy, Tom Watson, Ken Whistler, Karl Williamson, and Richard Wordingham for their feedback on the document.

Modifications

The following summarizes modifications from the previous revision of this document.

Revision 23

Summary:

The main focus in this release is on handling the complement of properties of strings. The distinction is drawn between code point complement and full complement, followed by explicitly defining the complement operator [^...] to be code point complement, and providing the reasons for doing so in an annex. The important difference between [A--B] and [A&&[^B]] is outlined — setting out the reasons why the latter is insufficient to represent set difference.

For the EBNF in general, and for character classes with strings in particular, examples were added and the text clarified. A new annex provides examples for how character classes can be parsed.

Modifications for previous versions are listed in those respective versions.