Stuart Pease (Fibreglass) Ltd

GRP components for the Rail Industry We have manufactured various components of different shapes, sizes and complexities for the rail industry for many years. The product range includes components such as shrouds, valances, litter bins, speaker covers, guards, sink units etc. The products are manufactured from a variety of fire retardant and low smoke emission materials to meet specific fire retardant standards, for example – class 2, class 1, class 0, HL1, HL2 and HL3. Please contact us for all your GRP requirements. Stuart Pease (Fibreglass) Ltd www.stuartpease.co.uk 01709 527761 07717 482548 #grp #fibreglass #mouldings #rail #railindustry #railwayengineering #repairandmaintenance

Stormforce 10 refurbishments A number of log-boats from the ‘Stormforce 10’ ride at Drayton Manor needed refurbishment, as due to their age the bottom of the boats were beginning to lose their non-slip surface, and hence were struggling to travel-up the conveyor. New patterns and GRP moulds were manufactured, the existing bottoms were removed and replaced with new, and various other components were also replaced at the same time. The customer was delighted with the outcome. #grp #fibreglass #mouldings #refurbishment #leisureindustry #themepark #repairs #moulding

Large GRP sectional enclosure This enclosure is approx. 3.1m long x 2.2m wide x 2.6m high. It has double lockable doors, sloping roof, air vents, and an internal flange for fixing purposes. It was made in sections because not only was it quite large, but access to the site was limited and hence problematic. Please be advised that we can manufacture a wide range of GRP cabinets and enclosures of various shapes and sizes, utilising either general purpose or fire-retardant materials. #grp #fibreglass #mouldings #electricalcontractor #cabinets #enclosures #electricalmaintenance

GRP light fittings We were commissioned to manufacture 3 off large light fittings for a bar in Sunderland. To minimise the tooling cost a quarter-section of a timber pattern was manufactured, we then manufactured 4 off GRP production moulds from this pattern, joined the GRP moulds together and then manufactured the one-piece products. The products were then worked-on to remove the joint lines so that the products appeared as a one-piece moulding. The client, ‘Pulp Studios Design House’, was delighted with the end result - as were we! #grp #mouldings #fibreglass #architecture #architectural #architecturedesign #architectureanddesign