iPhone 14 Plus Top Speaker

Before You Begin

Warning

Read Battery Safety and follow workspace and battery handling guidelines before you begin.

Remove the following parts before you begin:

Tools

  • 6.7-inch repair tray

  • ESD-safe tweezers

  • JCIS bit

  • Nylon probe (black stick)

  • Torque driver (blue, 0.65 kgf cm)

  • Torque driver (gray, 0.55 kgf cm)

Removal

  1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.

  2. Use a torque driver and the JCIS bit to remove the crosshead screw from the sidewall of the enclosure. Keep the torque driver as perpendicular as possible to avoid stripping the screw. Set aside the screw.

  3. Use a torque driver and the JCIS bit to remove the seven crosshead screws from the top speaker. Set aside the screws.

  4. Lift the ends of the top speaker and back glass antenna flex cables from the connectors.

  5. Remove the top speaker from the enclosure.

Reassembly

  1. Position the top speaker in the enclosure.

  2. Press the ends of the top speaker and back glass antenna flex cables to the connectors.

  3. Use the gray torque driver and JCIS bit to install one new crosshead screw (923-08504) into the sidewall of the enclosure. Keep the torque driver as perpendicular as possible to avoid stripping the screw.

  4. Use the blue torque driver and JCIS bit to install four new crosshead screws (923-08506) (1) (923-08510) (5) into the top speaker.

  5. Use the gray torque driver and JCIS bit to install the following three new crosshead screws into the top speaker:

    • One crosshead screw (923-08504) (2)

    • One crosshead screw (923-08511) (3)

    • One crosshead screw (923-08505) (4)

Reinstall the following parts to complete reassembly:

Published Date: