Added the ability to toggle any machine to use parts per minute vs the number of machines. Parts per minute are in italics and number of machines are bolded. This effects both the entered limit and the displayed value. New "Machine Defaults" section in the settings allows you to toggle the default for placing new building of certain types. There is also an apply button to apply that default to certain sections of already placed machines, such as everything, current outpost, or selected.

Added the ability to specify Miner types, Mk.1, Mk.2, and Mk.3. These choices are reflected when calculating values in the summary panel and for entered limits when not in parts per minute mode.

Added the ability to set node purities for machines put on nodes with varying purities. They effect the calculations similar to changing machines.

Added the ability to set the belt input type for the awesome sink as the belt speed defines how many awesome sinks you would need.

Default limits are now customizable. This can also be found in the "Machine Defaults" section in the settings. The limit value depends on if parts per minute mode is set or not, so a limit of 60 you might want to change to a limit of 1 if you toggle off parts per minute. Clear the value entirely to have no default value for that machine type.

Added the Resource Well Pressurizer. Does nothing except looks pretty and is used for calculations in the summary panel such as power.

Geothermal Generators now how changeable purities instead of different recipes per purity. Sadly this change is not backwards compatible with old saves and any Geothermal Generators you have down will disappear and need to be replaced.

Alien Power Augmenters, unlike all other buildings, do not assume it has the inputs when nothing is connected. If the calculated value is less than the max entered, unlike all other buildings, it assumes you have built what you entered because they still generate power even with no inputs.

And as always, various small bug fixes.

Summary Panel:

New button in the bottom left of the main window brings up a summary panel.

This summary panel has several different sections which you can customize. It also has a selector at the top to change what you are summarizing, such as everything, the current outpost, or just what is selected. There is even a button in the bottom right of the summary panel to pop it out into a new window if you want.

Power: Shows a summary of the power created and used, including averages and max used and min produced, net power, and even power boosts from Alien Power Augmenters.

Overclock: See the number of Power Shards and Somersloops needed. This rounds the number of machines up when calculating.

Output: See how many parts you are outputting. You can customize this to show Unused outputs (outputs that are highlighted in green). Used outputs (outputs that go to another machine that is not in your current summary selection). And Sunk (what is going to Awesome Sinks).

Output Sink Points: The same as output, but it shows the total sink values for each part.

Inputs: See how many parts you are inputting. You can customize this to show Unmade inputs (inputs that are highlighted in red). Made inputs (inputs that come from another machine that is not in your current summary selection). And Mined (parts that come from machines that have no inputs).

Input Sink Points: The same as input, but it shows the total sink values for each part.

Machines: The number of each type of machine needed (rounded up for each one placed).

Cost To Build: The total cost to build all the machines listed in the Machines section.


Improvements:

* Improved calculation times in some scenarios. Specifically, adding a splitter with overflow to something with no limit, like an awesome sink prevents parts from backing up further up the line in game. If all connections between two sections have an overflow like this, the algorithm can now detect that the second section cannot backup into the first and thus the first section can be calculated independently of the second section, greatly improving calculation times.

* Changed mouse sensitivity. Previously if the mouse moved more than 1 pixel between button pressed and released it would count as a drag. This made it difficult to click sometimes as it would often register as a drag instead. Changed to have a buffer of 25 pixels. This also means that in order to drag something less than 25 pixels, you need to drag out at least 25 pixels to trigger the drag, then drag back.

* Added CMD keybinds in addition to CTRL for Macs. Added CTRL Insert and SHIFT Insert to copy and paste. Can paste at a location with middle mouse button.

* Approximate Tier information can be found on recipe descriptions.

* Buttons now have rounded corners


Bug Fixes:

* Added somersloop overclocking to smelters

* Numerous small bug fixes