1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 863 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1863 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727
|
/*
** THIS SOFTWARE IS SUBJECT TO COPYRIGHT PROTECTION AND IS OFFERED ONL
** PURSUANT TO THE 3DFX GLIDE GENERAL PUBLIC LICENSE. THERE IS NO RIGH
** TO USE THE GLIDE TRADEMARK WITHOUT PRIOR WRITTEN PERMISSION OF 3DF
** INTERACTIVE, INC. A COPY OF THIS LICENSE MAY BE OBTAINED FROM THE
** DISTRIBUTOR OR BY CONTACTING 3DFX INTERACTIVE INC([email protected]).
** THIS PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
** EXPRESSED OR IMPLIED. SEE THE 3DFX GLIDE GENERAL PUBLIC LICENSE FOR
** FULL TEXT OF THE NON-WARRANTY PROVISIONS.
**
** USE, DUPLICATION OR DISCLOSURE BY THE GOVERNMENT IS SUBJECT T
** RESTRICTIONS AS SET FORTH IN SUBDIVISION (C)(1)(II) OF THE RIGHTS I
** TECHNICAL DATA AND COMPUTER SOFTWARE CLAUSE AT DFARS 252.227-7013
** AND/OR IN SIMILAR OR SUCCESSOR CLAUSES IN THE FAR, DOD OR NASA FA
** SUPPLEMENT. UNPUBLISHED RIGHTS RESERVED UNDER THE COPYRIGHT LAWS O
** THE UNITED STATES.
**
** COPYRIGHT 3DFX INTERACTIVE, INC. 1999, ALL RIGHTS RESERVE
**
** $Header: /cvsroot/glide/glide3x/h5/glide3/src/gpci.c,v 1.4 2001/03/05 15:02:18 alanh Exp $
** $Log:
** 44 3dfx 1.34.1.2.1.511/08/00 Drew McMinn Create initialise read and
** use useAppGamma flag, to allow us to disable applications changing gamma
** values.
** 43 3dfx 1.34.1.2.1.410/11/00 Brent Forced check in to enforce
** branching.
** 42 3dfx 1.34.1.2.1.309/26/00 Andy Hanson Add environment variable of
** glide group so they can do wacky things safely.
** 41 3dfx 1.34.1.2.1.208/29/00 Jonny Cochrane Some 8x FSAA code
** 40 3dfx 1.34.1.2.1.108/01/00 Andy Hanson Fixed issue with source
** ignoring setting of GLIDE_SPLASH define.
** Fixed issue with setting of splash state when it wasn't going to be run.
** 39 3dfx 1.34.1.2.1.006/28/00 troy thornton added initialization of
** correct jitter values
** 38 3dfx 1.34.1.2 06/20/00 Joseph Kain Fixed errors introduced in
** merge.
** 37 3dfx 1.34.1.1 06/20/00 Joseph Kain Changes to support the
** Napalm Glide open source release. Changes include cleaned up offensive
** comments and new legal headers.
** 36 3dfx 1.34.1.0 06/15/00 Bill White Merged changes to support
** Linux.
**
** 35 3dfx 1.34 04/21/00 Kenneth Dyke Magic FX_GLIDE_NO_HW
** support.
** 34 3dfx 1.33 04/13/00 Kenneth Dyke Added support for new style
** 2-sample AA mode.
** 33 3dfx 1.32 04/10/00 Kenneth Dyke Added magical screenshot
** hotkey.
** 32 3dfx 1.31 03/30/00 Kenneth Dyke Changed defaults for column
** band width and SLI band height.
** 31 3dfx 1.30 03/25/00 Adam Briggs added support for
** SSTH3_SLI_AA_CONFIGURATION (the env var the control panel uses to force AA
** modes)
** 30 3dfx 1.29 03/24/00 Chris Dow Added code to fence every n
** writes (not to exceed 0x10000) where n is either 0x10000 or indicated by
** the environment variable FX_GLIDE_FENCE_LIMIT
**
** 29 3dfx 1.28 03/23/00 Kenneth Dyke Change 2PPC band height
** default to 2.
** 28 3dfx 1.27 03/21/00 Kenneth Dyke Performance tweaks to
** default env vars. Added env for disabling SLI band height clamp.
** 27 3dfx 1.26 03/16/00 Adam Briggs default FX_GLIDE_WAX_ON to
** 1
** 26 3dfx 1.25 03/16/00 Kenneth Dyke User-adjustable LOD bias
** value.
** 25 3dfx 1.24 03/14/00 Adam Briggs enable analog sli in 2X
** modes or when forced
** 24 3dfx 1.23 03/08/00 Kenneth Dyke New use isMapped boardInfo
** flag instead of broken gc flag.
** 23 3dfx 1.22 03/06/00 Kenneth Dyke Added backdoor hack to
** toggle AA on and off on the fly.
** 22 3dfx 1.21 02/18/00 Adam Briggs added FX_GLIDE_WAX_ON var
** which must be set to 1 to enable the newly uncommented SLI WAX buffer
** clears
** 21 3dfx 1.20 02/08/00 Kenneth Dyke Initialize sliBandHeight in
** the proper place.
** 20 3dfx 1.19 01/31/00 Adam Briggs changed the IS_NAPALM macro
** to cooperate with the display driver version of the same
** 19 3dfx 1.18 01/31/00 Adam Briggs Changed all device ID magic
** numbers to use those defined in fxhal.h & added IS_NAPALM macro to test
** against device ID range
** 18 3dfx 1.17 01/23/00 Adam Briggs set & recognize the SSTTYPE
** var for Voodoo4
** 17 3dfx 1.16 01/21/00 Adam Briggs some changes to get the
** correct linear mappings for slave regs and use them to sync the fifos in
** sli mode
** 16 3dfx 1.15 01/18/00 Kenneth Dyke Added environment variables
** for configuring AA jitter offsets.
** 15 3dfx 1.14 01/16/00 Kenneth Dyke Triangle column width
** tweaking.
** 14 3dfx 1.13 01/16/00 Kenneth Dyke Changed defaults for 32-bit
** and AA environment variables.
** 13 3dfx 1.12 01/07/00 Adam Briggs Moved freeThreadStorage
** from grShutdown to the DllMain process detach code. This fixes PRS#12190,
** 12192 and 12196.
** 12 3dfx 1.11 12/10/99 Kenneth Dyke Ugh. Undid some changes
** for backwards compatibility.
**
** 11 3dfx 1.10 12/08/99 Kenneth Dyke Fixed stupid macro problem.
** 10 3dfx 1.9 12/08/99 Kenneth Dyke Environment variable
** checking is now actually sane and based on the value of the variable and
** not just its presence.
** 9 3dfx 1.8 12/03/99 Adam Briggs set sli bandheight to
** FX_GLIDE_SLI_BAND_HEIGHT instead of zero(!)
** 8 3dfx 1.7 11/11/99 Adam Briggs My bad: Apparently V3
** cards have zero chips on them, so don't even bother with the first step
** through the SLI slave reg loops.
** 7 3dfx 1.6 11/09/99 Larry warner Make the world safe for h3.
** 6 3dfx 1.5 11/09/99 Adam Briggs Added support for reading
** the Status reg on slave chips in order to form a more perfect flush
** function.
** 5 3dfx 1.4 11/05/99 Anthony tai added
** FX_GLIDE_SWAPPENDINGCOUNT. Default=1. Range 0-3
** 4 3dfx 1.3 10/08/99 Adam Briggs Supported FX_GLIDE_BPP &
** FX_GLIDE_AA_SAMPLE environment vars so the user can override the pixel
** format in grSstWinOpen calls
** 3 3dfx 1.2 09/22/99 Larry warner Created download procedures
** for FXT1 format.
** 2 3dfx 1.1 09/13/99 Anthony tai added napalm tmu case
** 1 3dfx 1.0 09/11/99 StarTeam VTS Administrator
** $
**
**
** 74 8/31/99 5:48p Atai
** fixed chip count
**
** 73 8/19/99 7:55p Larryw
** FXT1 Tsplit changes.
**
** 72 8/05/99 5:03p Larryw
** FXT1 format works now.
**
** 71 8/04/99 10:27a Atai
** hack to enable chip count
**
** 70 7/29/99 7:07p Larryw
** Pave the way for FXT1 (but not quite there yet).
**
** 69 7/26/99 12:11p Atai
** initialize pci registers for sli/aa
**
** 68 7/21/99 3:59p Atai
** added sliBandHeight env var
**
** 67 7/18/99 11:11a Atai
** added 2 pixel per clock
**
** 66 7/14/99 9:39a Atai
** direct register write for glide3x
** test04 can do 4 sample aa (2 chips)
**
** 65 7/06/99 5:00p Atai
** sync with tot csim
**
** 64 7/06/99 2:46p Atai
** initailize gbc env var
**
** 63 6/24/99 7:13p Atai
** initialize combine_ext_mode with 0
**
** 62 6/18/99 10:39p Atai
** added csim env var to specify chip #
**
** 61 6/14/99 5:16p Larryw
** Added 32-bit texture format support.
**
** 60 6/08/99 6:04p Stb_sbrooks
** Added fifoSize environment var
**
** 59 6/03/99 5:23p Russp
** Add in some ifdef'd code to allow variable texture alignment
**
** 58 6/03/99 12:15p Kcd
** PowerPC still uses C vertex routines when C triangle setup is turned
** off.
**
** 57 6/03/99 11:18a Atai
** force deviceID to 7 for code development
**
** 56 5/28/99 3:45p Atai
** added base_ptr value for grTexMaxAddress
**
** 55 5/21/99 9:22a Stb_gkincade
** Put in check for : is GETENV(SSTH3_ALPHADITHERMODE) a null string?
**
** 53 5/20/99 9:03a Atai
** is GETENV("SSTH3_ALPHADITHERMODE") a null string?
**
** 52 5/13/99 2:38p Stb_gkincade
** Added user support for turning on/off dither substraction
**
** 51 4/29/99 10:17p Atai
** disable context code in csim
**
** 50 4/22/99 3:53p Dow
** Alt-Tab on NT
**
** 49 4/16/99 2:55p Kcd
** PowerPC PCI Bump & Grind
**
** 48 4/10/99 2:21p Atai
** fixed sstRegs
**
** 47 4/10/99 1:54p Atai
** added ioReg, cReg, gReg, and rawLfb
**
** 46 4/07/99 7:18p Atai
** added uma extension
**
** 45 4/01/99 7:55p Peter
** made names and comments more meaningful
**
** 44 3/31/99 9:02p Dow
** context loosing means no writing to hw
**
** 43 3/30/99 3:21p Atai
** use hwcGetenv if hwc is used
**
** 42 3/17/99 5:08p Peter
** removed whacky stuff now that the command fifo threshold stuff appears
** to make all happy (including the k7)
**
** 41 3/14/99 1:48p Peter
** cmd's bng optimization
**
** 40 3/12/99 2:24p Dow
** Remove 3DNow for K7 (temp workaround)
**
** 39 2/18/99 3:59p Kcd
** Fixed _grGlideInitEnvironment to build on non-Win32 systems.
**
** 38 2/17/99 6:38p Atai
** Fixed hack which broke grGet(GR_NUM_BOARDS,,)
**
** 37 2/11/99 1:38p Atai
** sync buffer swap pending code, the right way.
**
** 36 1/25/99 6:33p Peter
** removed some cruft I saw when cleaning up tiled textures
**
** 35 1/20/99 10:54a Dow
** Voodoo 3 id for apps
**
** 34 12/14/98 2:20p Dow
** $#@!
**
** 33 12/07/98 11:33a Peter
** norbert's re-fixes of my merge
**
** 32 12/03/98 11:12p Dow
** added GLIDE_FGETENV for floating-point
**
** 31 12/03/98 10:39p Dow
** Removed registry code
**
** 30 12/02/98 2:06p Dow
** Fixed Control Panel stuff for W95 & WNT
**
** 29 12/02/98 1:00p Atai
** Hack. Setup up triangle and vertex array routine
**
** 28 12/02/98 11:11a Dow
** Fixed Control Panel
**
** 27 12/02/98 10:38a Dow
** Fixed Registry path for NT
**
** 26 11/18/98 7:50p Atai
** use env var FX_GLIDE_NUM_TMU
**
** 25 11/17/98 7:03p Atai
** added env var "FX_GLIDE_DISABLE_TMU1"
**
** 24 11/15/98 3:21a Atai
** first attempt to make 2 tmus work in H4 glide3x full screen mode, just
** in time check-in for comdex demo. warning: the code is not completed
** yet.
**
** 23 11/09/98 3:34p Mikec
** Glide read registry on NT.
**
** 22 11/02/98 5:34p Peter
** tls per thread for fullscreen contexts
**
** 21 10/16/98 1:24p Peter
** c trisetup fixes
**
** 20 10/14/98 3:38p Dow
** Gamma stuff
**
** 19 10/12/98 9:51a Peter
** dynamic 3DNow!(tm)
**
** 18 9/04/98 11:35a Peter
** re-open fix for nt (thanks to taco/rob/nt bob)
**
** 17 8/29/98 4:35p Dow
** Thread Optimization stuff
**
** 16 8/27/98 9:27p Atai
** fix env variable for glide3x
**
** 15 8/21/98 3:48p Jdt
** Added DLLMAIN function to restore desktop during critical failure.
**
** 14 8/03/98 6:40a Jdt
** multi-thread changes
**
** 13 7/01/98 12:41p Jdt
** Removed global p6FenceVar
**
** 12 5/28/98 2:07p Peter
** banshee merge
**
** 11 5/06/98 1:51p Peter
** more real banshee for glide3
**
** 10 5/05/98 2:22p Peter
** banshee is really banshee
**
** 9 4/30/98 5:01p Peter
** first pass glide3 merge
**
** 7 4/22/98 4:57p Peter
** glide2x merge
**
** 6 2/10/98 7:04p Atai
** change module name
**
** 5 1/30/98 4:51p Peter
** fixed sli-detect for multiple pairs
**
** 4 1/30/98 4:29p Peter
** no uswc for sli slave
**
** 3 1/20/98 11:03a Peter
** env var to force triple buffering
*
* 2 1/16/98 5:41p Peter
* fixed sense of lod_dither
*
* 1 1/16/98 4:29p Atai
* create glide 3 src
*
* 92 1/14/98 10:22a Peter
* no more hacks
*
* 91 1/08/98 7:09p Peter
* real hw stuff modulo makefile change
*
* 90 1/07/98 11:18a Atai
* remove GrMipMapInfo and GrGC.mm_table in glide3
*
* 89 1/07/98 10:22a Peter
* lod dithering env var
*
* 88 12/17/97 10:08a Peter
* fast system comdex twiddling
*
* 87 12/09/97 4:20p Peter
* 0x100 fbiRev ofset for v2
*
* 86 12/09/97 12:20p Peter
* mac glide port
*
* 85 12/05/97 4:26p Peter
* watcom warnings
*
* 84 12/03/97 2:36p Peter
* upped comdex reset defaults
*
* 83 12/02/97 9:48a Dow
* Removed some spurious code I inadvertantly added.
*
* 82 11/21/97 6:24p Dow
* Banshee Lying about being Rush stuf
*
* 81 11/21/97 11:19a Dow
* Made Banshee report Voodoo2
*
* 80 11/20/97 6:39p Peter
* fixed direct_exec w/ csim
*
* 79 11/19/97 2:49p Peter
* env vars in registry for win32
*
* 78 11/17/97 4:55p Peter
* watcom warnings/chipfield stuff
*
* 77 11/15/97 7:43p Peter
* more comdex silliness
*
* 76 11/14/97 11:10p Peter
* open vs hw init confusion
*
* 75 11/14/97 5:02p Peter
* more comdex stuff
*
* 74 11/14/97 12:09a Peter
* comdex thing and some other stuff
*
* 73 11/12/97 9:54p Peter
* fixed all the effage from new config
*
* 72 11/12/97 9:37p Dow
* Textures on Banshee half work
*
* 71 11/12/97 9:22a Dow
* h3 mods
*
* 70 11/08/97 3:34p Peter
* fixed stupid gdbg_info crasher
*
* 69 11/04/97 4:00p Dow
* Banshee Mods
*
* 68 11/03/97 3:43p Peter
* h3/cvg cataclysm
*
* 67 11/01/97 12:11p Pgj
* glide.dll ---> glide2x.dll
*
* 66 10/31/97 8:53a Peter
* last lying change, really
*
* 65 10/30/97 3:42p Peter
* protected the last bit of nonsense
*
* 64 10/30/97 3:37p Peter
* spoof sst1 stuff
*
* 63 10/29/97 2:45p Peter
* C version of Taco's packing code
*
* 62 10/23/97 5:28p Peter
* sli fifo thing
*
* 61 9/15/97 7:31p Peter
* more cmdfifo cleanup, fixed normal buffer clear, banner in the right
* place, lfb's are on, Hmmmm.. probably more
*
* 60 9/10/97 10:13p Peter
* fifo logic from GaryT, non-normalized fp first cut
*
* 59 9/05/97 5:29p Peter
* changes for direct hw
*
* 58 9/01/97 3:18p Peter
* correct integer rounding for pts
*
* 57 8/30/97 5:59p Tarolli
* init and hal fixups
*
* 56 8/30/97 1:19p Peter
* first cut at using blit to clear, more to come to do inner rects
*
* 55 8/18/97 3:52p Peter
* pre-hw arrival fixes/cleanup
*
* 54 7/30/97 2:42p Peter
* shared and sanitized
*
* 53 7/28/97 2:41p Peter
* turned sli code back on for cvg, but waiting for hal
*
* 52 7/25/97 11:40a Peter
* removed dHalf, change field name to match real use for cvg
*
* 51 7/08/97 2:47p Peter
* fixed merge stupidity from last checkin
*
* 50 7/02/97 12:28p Peter
* removed spurious NOP, tex dl
*
* 49 6/24/97 4:02p Peter
* proper cmd fifo placement
*
* 48 6/23/97 4:46p Peter
* fixed my effage
* 47 6/23/97 4:43p Peter
* cleaned up #defines etc for a nicer tree
**
*/
#include <stdio.h>
#include <string.h>
#include <3dfx.h>
#include <glidesys.h>
#define FX_DLL_DEFINITION
#include <fxdll.h>
#include <glide.h>
#include "fxglide.h"
#if GLIDE_PLATFORM & GLIDE_OS_WIN32
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#endif
#if (GLIDE_PLATFORM & GLIDE_SST_SIM)
#ifdef HAL_CSIM
#if H3
#include <h3regs.h>
#endif
#include <csim.h>
#elif HSIM
#include <gsim.h>
#endif
#endif /* (GLIDE_PLATFORM & GLIDE_SST_SIM) */
#if GLIDE3
#define kRevisionOffset 0x00UL
#else
#define kRevisionOffset 0x100UL
#endif
#ifdef GLIDE_TEST_TEXTURE_ALIGNMENT
FxU32 SST_TEXTURE_ALIGN;
#endif
/* null function procs that will get called when !gc->contextP. */
static FxI32 FX_CALL
_trisetup_null(const void* a, const void* b, const void* c)
{
/* Not really accurate, but pretend its been culled for some reason */
return 0;
}
static void FX_CALL
_grDrawVertexList_null(FxU32 pkType, FxU32 type, FxI32 mode, FxI32 count, void* ptrs)
{
/* Do Nothing */
}
static void FX_CALL
_grDrawTriangles_null(FxI32 mode, FxI32 count, void* vPtrs)
{
/* Do Nothing */
}
static void FX_CALL
_grTexDownload_null(struct GrGC_s* gc, const FxU32 tmuBaseAddr,
const FxI32 maxS, const FxI32 minT, const FxI32 maxT,
void* texData)
{
/* Do Nothing */
}
/* Collection of all of the known procs for a given system.
* - arch specialization
* - grState valid checking
* - coordinate system (window/clip)
* - culling mode (nocull/cull)
*/
static GrTriSetupProc _triSetupProcs[][2][2][2] =
{
/* Default arch procs */
{
/* Window coords */
{
{ _trisetup_Default_win_nocull_valid, _trisetup_Default_win_cull_valid },
{ _trisetup_Default_win_nocull_invalid, _trisetup_Default_win_cull_invalid },
},
/* Clip coordinates */
{
{ _vptrisetup_cull, _vptrisetup_cull },
{ _vptrisetup_cull, _vptrisetup_cull },
},
},
#if GL_AMD3D
/* 3DNow!(tm) Procs */
{
/* Window coords */
{
{ _trisetup_3DNow_win_nocull_valid, _trisetup_3DNow_win_cull_valid },
{ _trisetup_3DNow_win_nocull_invalid, _trisetup_3DNow_win_cull_invalid },
},
/* Clip coordinates */
{
{ _trisetup_clip_coor_thunk, _trisetup_clip_coor_thunk },
{ _trisetup_clip_coor_thunk, _trisetup_clip_coor_thunk },
},
},
#endif /* GL_AMD3D */
/* null arch procs */
{
/* Window coords */
{
{ (GrTriSetupProc) _trisetup_null, (GrTriSetupProc) _trisetup_null },
{ (GrTriSetupProc) _trisetup_null, (GrTriSetupProc) _trisetup_null },
},
/* Clip coordinates */
{
{ (GrTriSetupProc) _trisetup_null, (GrTriSetupProc) _trisetup_null },
{ (GrTriSetupProc) _trisetup_null, (GrTriSetupProc) _trisetup_null },
},
},
};
/* NB: This is the only set of asm specializations taht needs to be
* unset for C_TRISETUP. Currently, teh grDrawTriangle code will only
* vector to the asm code if C_TRISETUP is not set.
*/
#if GLIDE_USE_C_TRISETUP || __alpha__ || __POWERPC__
static GrVertexListProc _vertexListProcs[][2] = {
{ _grDrawVertexList, _grDrawVertexList },
#if GL_AMD3D
{ _grDrawVertexList, _grDrawVertexList },
#endif /* GL_AMD3D */
{ _grDrawVertexList_null, _grDrawVertexList_null },
};
#else /* Use asm code */
static GrVertexListProc _vertexListProcs[][2] = {
{ _drawvertexlist, _vpdrawvertexlist },
#if GL_AMD3D
{ _grDrawVertexList_3DNow_Window, _grDrawVertexList_3DNow_Clip },
#endif /* GL_AMD3D */
{ _grDrawVertexList_null, _grDrawVertexList_null },
};
#endif /* Use asm code */
static GrTexDownloadProc _texDownloadProcs[][4][5] =
{
/* Default Procs */
{
{
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_WideS
},
{
_grTexDownload_Default_8_1,
_grTexDownload_Default_8_2,
_grTexDownload_Default_8_4,
_grTexDownload_Default_8_WideS,
_grTexDownload_Default_8_WideS
},
{
_grTexDownload_Default_16_1,
_grTexDownload_Default_16_2,
_grTexDownload_Default_16_WideS,
_grTexDownload_Default_16_WideS,
_grTexDownload_Default_16_WideS
},
{
_grTexDownload_Default_32_1,
_grTexDownload_Default_32_WideS,
_grTexDownload_Default_32_WideS,
_grTexDownload_Default_32_WideS,
_grTexDownload_Default_32_WideS
}
},
#if GL_AMD3D
{
{
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_8,
_grTexDownload_Default_4_WideS
},
{
_grTexDownload_Default_8_1,
_grTexDownload_Default_8_2,
_grTexDownload_Default_8_4,
_grTexDownload_3DNow_MMX,
_grTexDownload_3DNow_MMX,
},
{
_grTexDownload_Default_16_1,
_grTexDownload_Default_16_2,
_grTexDownload_3DNow_MMX,
_grTexDownload_3DNow_MMX,
_grTexDownload_3DNow_MMX,
},
{
_grTexDownload_Default_32_1,
_grTexDownload_Default_32_WideS,
_grTexDownload_Default_32_WideS,
_grTexDownload_Default_32_WideS,
_grTexDownload_Default_32_WideS
}
},
#endif /* GL_AMD3D */
/* NULL download procs */
{
{
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null
},
{
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null
},
{
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null
},
{
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null,
_grTexDownload_null
}
},
};
/* Some macros to prevent RSI */
#define GC _GlideRoot.GCs[ctx]
#define SST _GlideRoot.hwConfig.SSTs[ctx]
#define REGSTR_PATH_3DFXSW "Software\\3Dfx Interactive\\Voodoo2"
#define REGSTR_PATH_GLIDE REGSTR_PATH_3DFXSW"\\Glide"
#if !defined(GLIDE_INIT_HAL)
#ifdef GETENV
#undef GETENV
#endif
#define GETENV(a) hwcGetenv(a)
#endif
/*-------------------------------------------------------------------
Function: _grSstDetectResources
Date: --
Implementor(s): Dow, Gmt, Jdt
Library: Glide
Description:
Discover devices on the PCI bus.
Discover configuration of detected devices.
Initialize all Glide GC's
Recognized devices depend upon compile time flags
This code should NOT initialize the hardware
any more than is necessary for discovery of
configuration
Arguments: none
Return:
FXTRUE - at least one device was detected
FXFALSE - no devices were detected.
-------------------------------------------------------------------*/
FxBool
_grSstDetectResources(void)
{
static FxBool calledP = FXFALSE;
FxBool rv = FXFALSE;
FxU32 ctx;
GDBG_INFO(280, "_grSstDetectResources()\n");
if (!calledP) {
#if GLIDE_INIT_HAL
FxU32 count = HAL_MAX_BOARDS;
FxU32 chipCount = 1;
/* The first time through the init code we need to map
* all of the boards. Future calls can just grab this
* info out of the halInfo that we have here.
*/
FxU32 device;
HalInfo* halInfo = fxHalInit(0);
if (halInfo == NULL) goto __errExit;
{
/*
** hack alert!!
** by default, there is no device around so we hack the device
** number in here (copy code from diag).
*/
char* envChipNum = GETENV("FX_GLIDE_NUM_CHIPS");
FxBool useMultiFunctionDevices=FXFALSE;
FxU32 busNumber, deviceNumber, functionNumber;
FxU32 counter;
if (envChipNum)
chipCount = atoi(envChipNum);
switch(chipCount) {
case 4:
busNumber = 3;
deviceNumber = 2;
functionNumber = 0;
halInfo->boardInfo[2].pciBusNumber = busNumber;
halInfo->boardInfo[2].pciDeviceNumber = deviceNumber;
halInfo->boardInfo[2].pciFunctionNumber = functionNumber;
halInfo->boardInfo[2].deviceNumber = busNumber * 32 deviceNumber;
busNumber = 3;
deviceNumber = 2;
functionNumber = 1;
halInfo->boardInfo[3].pciBusNumber = busNumber;
halInfo->boardInfo[3].pciDeviceNumber = deviceNumber;
halInfo->boardInfo[3].pciFunctionNumber = functionNumber;
halInfo->boardInfo[3].deviceNumber = busNumber * 32 deviceNumber;
case 2:
busNumber = 2;
deviceNumber = 1;
functionNumber = 1;
halInfo->boardInfo[1].pciBusNumber = busNumber;
halInfo->boardInfo[1].pciDeviceNumber = deviceNumber;
halInfo->boardInfo[1].pciFunctionNumber = functionNumber;
halInfo->boardInfo[1].deviceNumber = busNumber * 32 deviceNumber;
useMultiFunctionDevices=FXTRUE;
case 1:
default:
busNumber = 2;
deviceNumber = 1;
functionNumber = 0;
halInfo->boardInfo[0].pciBusNumber = busNumber;
halInfo->boardInfo[0].pciDeviceNumber = deviceNumber;
halInfo->boardInfo[0].pciFunctionNumber = functionNumber;
halInfo->boardInfo[0].deviceNumber = busNumber * 32 deviceNumber;
break;
}
/* Initialize the csim boards/chips */
for(counter=0; counter<chipCount; counter ) {
halInfo->boardInfo[counter].sstCSIM = csimInit(counter);
if(useMultiFunctionDevices)
csimMakeMultiFunctionDevice(halInfo->boardInfo[counter].sstCSIM);
CSIM_PRIVATE(halInfo->boardInfo[counter].sstCSIM)->environment.chipCount = chipCount;
CSIM_PRIVATE(halInfo->boardInfo[counter].sstCSIM)->environment.sliBandHeight
= _GlideRoot.environment.sliBandHeight;
}
}
#if (GLIDE_PLATFORM & GLIDE_SST_SIM)
/* The simulator can support any number of boards through
* successive calls to fxHalMapBoard.
*/
{
const char* envBoardNum = GETENV("FX_SIM_BOARDS");
FxU32 temp;
count = (((envBoardNum != NULL) && (sscanf(envBoardNum, "%ld", &temp) == 1))
? temp
: 1);
if (count > HAL_MAX_BOARDS) {
GDBG_INFO(0, "Error: FX_SIM_BOARDS(%ld) > %d. Using %d.\n",
count, HAL_MAX_BOARDS, HAL_MAX_BOARDS);
count = HAL_MAX_BOARDS;
}
count *= chipCount;
}
#endif /* (GLIDE_PLATFORM & GLIDE_SST_SIM) */
for(ctx = device = 0; device < count; device ) {
SstRegs* devRegs;
devRegs = fxHalMapBoard(device);
}
for(ctx = device = 0; device < count; device ) {
/* See RSI-prevention macros for usage of [ctx] */
const FxDeviceInfo* curDev = NULL;
FxBool regInitP = FXFALSE;
SstRegs* devRegs;
devRegs = fxHalMapBoard(device);
if ((device % chipCount) == 0)
GC.is_master = FXTRUE;
else
GC.is_master = FXFALSE;
GC.chipCount = chipCount;
GC.sliBandHeight = _GlideRoot.environment.sliBandHeight;
curDev = halInfo->boardInfo device;
GC.halInfo = halInfo;
if (devRegs != NULL) {
FxU32 tmuMem = 0x00;
SST.type = GR_SSTTYPE_Banshee;
if (!fxHalInitRegisters(curDev->virtAddr[0])) goto __errRegFailure;
#if USE_PACKET_FIFO && GLIDE_DEBUG && HAL_CSIM
if ((halInfo->csim == 1) && (GETENV("FX_FIFO_DIRECT_EXEC") != NULL)) {
// halInfo->csim = -1;
GDBG_INFO(80, "Turning on direct fifo execution\n");
}
#endif /* USE_PACKET_FIFO && GLIDE_DEBUG && HAL_CSIM */
#ifdef DIRECT_IO
GC.sstRegs = (SstRegs *) (curDev->physAddr[0] 0x200000);
GC.ioRegs = (SstIORegs *) (curDev->physAddr[0]);
GC.cRegs = (SstCRegs *) (curDev->physAddr[0] 0x80000);
GC.rawLfb = (FxU32 *) curDev->physAddr[1];
#endif /* DIRECT_IO */
/* This device is ready to go. */
regInitP = FXTRUE;
/* Set up pointers to the various address spaces within the hw */
GC.base_ptr = (FxU32*)SST_BASE_ADDRESS(curDev->physAddr[0]);
GC.reg_ptr = (FxU32*)devRegs;
GC.lfb_ptr = (FxU32*)SST_LFB_ADDRESS(curDev->physAddr[0]);
GC.tex_ptr = (FxU32*)SST_TEX_ADDRESS(curDev->physAddr[0]);
GC.sstRegs = devRegs;
GC.ioRegs = (SstIORegs *) SST_IO_ADDRESS(devRegs);
GC.cRegs = (SstCRegs *) SST_CMDAGP_ADDRESS(devRegs);
GC.gRegs = (SstGRegs *) SST_GUI_ADDRESS(devRegs);
#define SST_RAW_LFB_ADDRESS(sst) (SST_RAW_LFB_OFFSET SST_BASE_ADDRESS(sst))
GC.rawLfb = (FxU32 *) SST_RAW_LFB_ADDRESS(devRegs);
/* GC.rawLfb = (FxU32 *) SST_LFB_ADDRESS(devRegs); */
#ifdef FX_GLIDE_NAPALM
/* force the deviceID to 7 for code development */
{
static hwcBoardInfo tmpbInfo;
GC.bInfo = &tmpbInfo;
GC.bInfo->pciInfo.deviceID = SST_DEVICE_ID_AP_OEM ;
}
#endif
/* Video parameters */
GC.grSstRez = GR_RESOLUTION_NONE;
GC.grSstRefresh = curDev->fbiVideoRefresh;
/* Chip configuration */
GC.num_tmu = curDev->numberTmus;
GC.fbuf_size = curDev->fbiMemSize;
_GlideRoot.hwConfig.num_sst ;
SST.sstBoard.SST96Config.fbRam = curDev->fbiMemSize;
SST.sstBoard.SST96Config.nTexelfx = curDev->numberTmus;
{
const FxU32 curTmuMemSize = 0x2;
SST.sstBoard.SST96Config.tmuConfig.tmuRev = (2 kRevisionOffset);
SST.sstBoard.SST96Config.tmuConfig.tmuRam = curTmuMemSize;
tmuMem = curTmuMemSize;
/* Clear the tmu state */
memset(&GC.tmu_state[0], 0, sizeof(GC.tmu_state[0]));
GC.tmu_state[0].total_mem = (curTmuMemSize << 20);
GC.tmu_state[0].ncc_mmids[0] =
GC.tmu_state[0].ncc_mmids[1] = GR_NULL_MIPMAP_HANDLE;
}
rv = FXTRUE;
ctx ;
}
__errRegFailure:
/* Either this is not the hw we're expecting, or we could not
* init/map the board for some reason. Either way try to cleanup.
*/
if (!regInitP && (devRegs != NULL)) {
fxHalShutdown(devRegs);
}
}
/* Done setting up. Don't do the silly mapping thing again. */
#else /* GLIDE_INIT_HWC */
/* There's a left brace before the #if */
hwcBoardInfo
*bInfo;
hwcInfo
*hInfo; /* Info about all the relavent boards */
int tmu;
FxU32 chipCount = 1;
/*
** hack alert!!
** the chipCount should come from the minivdd
*/
char* envChipNum = GETENV("FX_GLIDE_NUM_CHIPS");
if (envChipNum)
chipCount = atoi(envChipNum);
#ifndef __linux__
if ((hInfo = hwcInit(0x121a, 0x3)) == NULL)
goto __errExit;
#else /* defined(__linux__) */
if ((hInfo = hwcInit(0x121a, 0x9)) == NULL)
goto __errExit;
#endif /* defined(__linux__) */
/* Iterate through boards found */
for (ctx = 0; ctx < hInfo->nBoards; ctx ) {
bInfo = &hInfo->boardInfo[ctx];
GC.bInfo = bInfo;
if (bInfo->pciInfo.deviceID == SST_DEVICE_ID_H3)
SST.type = GR_SSTTYPE_Banshee;
#ifdef FX_GLIDE_NAPALM
else if (IS_NAPALM(bInfo->pciInfo.deviceID))
SST.type = GR_SSTTYPE_Voodoo4;
#endif
else
SST.type = GR_SSTTYPE_Voodoo3;
if (!hwcMapBoard(bInfo, HWC_BASE_ADDR_MASK)) {
GrErrorCallback(hwcGetErrorString(), FXTRUE);
}
if (!hwcInitRegisters(bInfo)) {
GrErrorCallback(hwcGetErrorString(), FXTRUE);
}
/* NB: We cannot fail to map this board after this point */
//GC.hwInitP = FXTRUE;
_GlideRoot.hwConfig.num_sst ;
GC.base_ptr = (FxU32 *) bInfo->regInfo.sstBase;
GC.sstRegs = (SstRegs *) bInfo->regInfo.sstBase;
GC.ioRegs = (SstIORegs *) bInfo->regInfo.ioMemBase;
GC.cRegs = (SstCRegs *) bInfo->regInfo.cmdAGPBase;
GC.lfb_ptr = (FxU32 *) bInfo->regInfo.lfbBase;
GC.rawLfb = (FxU32 *) bInfo->regInfo.rawLfbBase;
GC.chipCount = bInfo->pciInfo.numChips;
/* KCD: This can't be done here, since the environment variables
may not have been set up yet! */
/* GC.sliBandHeight = _GlideRoot.environment.sliBandHeight; */
#ifdef FX_GLIDE_NAPALM
/* AJB- Point at slave chip regs
*/
{
FxU32 chip ;
if (GC.chipCount)
for (chip = 0 ;
chip < GC.chipCount - 1 ;
chip )
{
GC.slaveSstRegs[chip] = (SstRegs *) bInfo->regInfo.slaveSstBase[chip] ;
GC.slaveCRegs[chip] = (SstCRegs *)bInfo->regInfo.slaveCmdBase[chip] ;
}
}
#endif
/* Video Parameters */
GC.grSstRez = GR_RESOLUTION_NONE;
GC.grSstRefresh = 0L;
/*
** Hack. Setup up triangle and vertex array routine
*/
if (_GlideRoot.deviceArchProcs.curTriProcs) {
GC.archDispatchProcs.coorModeTriVector = (*_GlideRoot.deviceArchProcs.curTriProcs) 0;
GC.archDispatchProcs.drawVertexList = _GlideRoot.deviceArchProcs.curVertexListProcs[0];
}
/* This is a uma device */
switch (hInfo->boardInfo[ctx].pciInfo.deviceID) {
case SST_DEVICE_ID_H3: /* Banshee */
GC.num_tmu = 1;
GC.fbuf_size = (bInfo->h3Mem - 2);
break;
case SST_DEVICE_ID_H4: /* Avenger low speed */
case SST_DEVICE_ID_H4_OEM: /* Avenger high speed */
/*
** For 8M board, we may only use one tmu for higher resolution.
** Need to re-visit the issue. 11/5/98
*/
GC.num_tmu = 2;
GC.fbuf_size = (bInfo->h3Mem - 4);
break;
default:
if ((hInfo->boardInfo[ctx].pciInfo.deviceID >= SST_DEVICE_ID_L_AP) &&
(hInfo->boardInfo[ctx].pciInfo.deviceID <= SST_DEVICE_ID_H_AP))
{
GC.num_tmu = 2;
GC.fbuf_size = (bInfo->h3Mem - 4);
}
else
{
GC.num_tmu = 1;
GC.fbuf_size = (bInfo->h3Mem - 2);
}
break;
}
if (bInfo->h3Mem == 4) {
GC.num_tmu = 1;
GC.fbuf_size = (bInfo->h3Mem - 2);
}
if (GETENV("FX_GLIDE_NUM_TMU")) {
int num_tmu = atoi(GETENV("FX_GLIDE_NUM_TMU"));
switch (num_tmu) {
case 1:
GC.num_tmu = 1;
GC.fbuf_size = (bInfo->h3Mem - 2);
break;
case 2:
GC.num_tmu = 2;
GC.fbuf_size = (bInfo->h3Mem - 4);
break;
}
}
GC.state.grEnableArgs.texture_uma_mode = GR_MODE_DISABLE;
GC.state.grEnableArgs.combine_ext_mode = GR_MODE_DISABLE;
SST.sstBoard.SST96Config.fbRam = GC.fbuf_size;
SST.sstBoard.SST96Config.nTexelfx = GC.num_tmu;
SST.sstBoard.SST96Config.tmuConfig.tmuRev = (2 kRevisionOffset);
SST.sstBoard.SST96Config.tmuConfig.tmuRam = 0x0;
/* Clear the tmu state */
for (tmu = 0; tmu < GC.num_tmu; tmu ) {
memset(&GC.tmu_state[0], 0, sizeof(GC.tmu_state[0]));
GC.tmu_state[0].total_mem = (0x2 << 20);
GC.tmu_state[0].ncc_mmids[0] = GC.tmu_state[0].ncc_mmids[1] = GR_NULL_MIPMAP_HANDLE;
}
} /* iterate through boards found */
#endif
}
/* Did we previously find boards? */
rv = (_GlideRoot.hwConfig.num_sst != 0);
calledP = FXTRUE;
goto __errExit; /* Keep warnings happy */
__errExit:
return rv;
} /* _grSstDetectResources */
static void
displayBoardInfo(int i, GrHwConfiguration *hwc)
{
if ((hwc->SSTs[i].type == GR_SSTTYPE_VOODOO) ||
(hwc->SSTs[i].type == GR_SSTTYPE_Voodoo2)) {
int tmuNum;
GDBG_INFO(80,"SST board %d: 3Dfx Voodoo%s\n",
i, ((hwc->SSTs[i].type == GR_SSTTYPE_VOODOO) ? " Graphics" : "^2"));
if (hwc->SSTs[i].sstBoard.VoodooConfig.sliDetect) {
GDBG_INFO(80,"\tScanline Interleaved\n");
}
GDBG_INFO(80,"\tPixelfx rev 0x%lX with %d MB Frame Buffer\n",
hwc->SSTs[i].sstBoard.VoodooConfig.fbiRev,
hwc->SSTs[i].sstBoard.VoodooConfig.fbRam);
GDBG_INFO(80,"\t%d Texelfx chips:\n",
hwc->SSTs[i].sstBoard.VoodooConfig.nTexelfx);
for (tmuNum = 0;
tmuNum < hwc->SSTs[i].sstBoard.VoodooConfig.nTexelfx;
tmuNum ) {
GDBG_INFO(80,"\t\tTexelfx %d: Rev 0x%lX, %d MB Texture\n", tmuNum,
hwc->SSTs[i].sstBoard.VoodooConfig.tmuConfig[tmuNum].tmuRev,
hwc->SSTs[i].sstBoard.VoodooConfig.tmuConfig[tmuNum].tmuRam);
}
} else if (hwc->SSTs[i].type == GR_SSTTYPE_SST96) {
GDBG_INFO(80,"SST board %d: 3Dfx Voodoo Rush\n", i);
GDBG_INFO(80,"\tFBI Jr. with %d MB Frame Buffer\n",
hwc->SSTs[i].sstBoard.SST96Config.fbRam);
GDBG_INFO(80,"\tTexelfx chips: 1\n");
} else if (hwc->SSTs[i].type == GR_SSTTYPE_Voodoo2) {
GDBG_INFO(80,"SST board %d: 3Dfx Voodoo2\n", i);
} else if (hwc->SSTs[i].type == GR_SSTTYPE_Banshee) {
GDBG_INFO(80,"SST board %d: 3Dfx Banshee\n", i);
} else if (hwc->SSTs[i].type == GR_SSTTYPE_Voodoo3) {
GDBG_INFO(80,"SST board %d: 3Dfx Voodoo3\n", i);
} else if (hwc->SSTs[i].type == GR_SSTTYPE_Voodoo4) {
GDBG_INFO(80,"SST board %d: 3dfx Voodoo4\n", i);
} else {
GDBG_INFO(80,"error: SSTs %d: unknown type\n",i);
}
} /* displayBoardInfo */
void
_GlideInitEnvironment(void)
{
#define FN_NAME "_GlideInitEnvironment"
int i;
FxU32 ditherMode;
const char* envStr;
#if (GLIDE_PLATFORM & GLIDE_OS_WIN32)
OSVERSIONINFO ovi;
#endif
if (_GlideRoot.initialized) /* only execute once */
return;
GDBG_INIT(); /* init the GDEBUG libraray */
GDBG_INFO(80,"%s()\n", FN_NAME);
GDBG_INFO(0,"GLIDE DEBUG LIBRARY\n"); /* unconditional display */
#if (GLIDE_PLATFORM & GLIDE_OS_WIN32)
ovi.dwOSVersionInfoSize = sizeof ( ovi );
GetVersionEx ( &ovi );
if (ovi.dwPlatformId == VER_PLATFORM_WIN32_NT)
_GlideRoot.OSWin95 = 0;
else
_GlideRoot.OSWin95 = 1;
GDBG_INFO(80, "%s: OS = %s\n", FN_NAME, _GlideRoot.OSWin95 ? "W9X" : "WNT");
#if defined(FX_DLL_ENABLE) && (GLIDE_PLATFORM & GLIDE_OS_WIN32)
{ /* GMT: display the DLL pathname for sanity checking */
char buf[132] = "failed";
GetModuleFileName(GetModuleHandle("glide3x.dll"), buf, sizeof(buf));
GDBG_INFO(0,"DLL path: %s\n",buf);
}
#endif
#endif
/* Check for user environment tweaks */
#define GLIDE_GETENV(__envVar, __defVal) \
(((envStr = GETENV(__envVar)) == NULL) ? (__defVal) : atol(envStr))
#define GLIDE_FGETENV(__envVar, __defVal) \
(((envStr = GETENV(__envVar)) == NULL) ? (__defVal) : (float) atof(envStr))
#define GLIDE_34GETENV(__envVar, __defVal) \
(((signed char)(atof(((envStr = GETENV(__envVar)) == NULL) ? (__defVal) : (envStr))*16.0f) 8)&0x7f)
#ifdef GLIDE_TEST_TEXTURE_ALIGNMENT
SST_TEXTURE_ALIGN = GLIDE_GETENV("FX_GLIDE_TEX_ALIGN", 0x10UL);
#endif
_GlideRoot.environment.triBoundsCheck = GETENV("FX_GLIDE_BOUNDS_CHECK") != NULL;
GDBG_INFO(80," triBoundsCheck: %d\n",_GlideRoot.environment.triBoundsCheck);
#ifdef GLIDE_SPLASH
_GlideRoot.environment.noSplash = GETENV("FX_GLIDE_NO_SPLASH") != NULL;
#else
_GlideRoot.environment.noSplash = 1;
#endif
GDBG_INFO(80," noSplash: %d\n",_GlideRoot.environment.noSplash);
_GlideRoot.environment.shamelessPlug = GETENV("FX_GLIDE_SHAMELESS_PLUG") != NULL;
GDBG_INFO(80," shamelessPlug: %d\n",_GlideRoot.environment.shamelessPlug);
_GlideRoot.environment.ignoreReopen = GETENV("FX_GLIDE_IGNORE_REOPEN") != NULL;
GDBG_INFO(80," ignoreReopen: %d\n",_GlideRoot.environment.ignoreReopen);
_GlideRoot.environment.disableDitherSub = GETENV("FX_GLIDE_NO_DITHER_SUB") != NULL;
GDBG_INFO(80," disableDitherSub: %d\n",_GlideRoot.environment.disableDitherSub);
_GlideRoot.environment.fifoSize = GETENV("FX_GLIDE_FIFO_SIZE") != NULL;
GDBG_INFO(80," fifoSize: %d\n",_GlideRoot.environment.fifoSize);
_GlideRoot.environment.noHW = GETENV("FX_GLIDE_NO_HW") != NULL;
GDBG_INFO(80," noHW: %d\n",_GlideRoot.environment.noHW);
/* set default glide state to not openGL app */
_GlideRoot.environment.is_opengl=FXFALSE;
/* note - glide now uses a string representation for the AA jitter values */
/* This is the "old" way of doing two-sample AA, where each chip does two samples. */
_GlideRoot.environment.aaXOffset[1][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaXOffset[1][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaXOffset[1][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaXOffset[1][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[1][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[1][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[1][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[1][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_DEF);
/* This is a nasty evil hack! This rearranges the sample offsets to deal with the new way of doing two sample AA */
_GlideRoot.environment.aaXOffset[2][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaXOffset[2][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaXOffset[2][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaXOffset[2][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[2][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[2][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[2][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_DEF);
_GlideRoot.environment.aaYOffset[2][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_DEF);
/* This is the "normal" layout for 4-sample AA */
_GlideRoot.environment.aaXOffset[3][0] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X0",PRIBUFVTXOFFX_4SMPL_CHP0_DEF);
_GlideRoot.environment.aaXOffset[3][1] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X1",SECBUFVTXOFFX_4SMPL_CHP0_DEF);
_GlideRoot.environment.aaXOffset[3][2] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X2",PRIBUFVTXOFFX_4SMPL_CHP1_DEF);
_GlideRoot.environment.aaXOffset[3][3] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X3",SECBUFVTXOFFX_4SMPL_CHP1_DEF);
_GlideRoot.environment.aaYOffset[3][0] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y0",PRIBUFVTXOFFY_4SMPL_CHP0_DEF);
_GlideRoot.environment.aaYOffset[3][1] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y1",SECBUFVTXOFFY_4SMPL_CHP0_DEF);
_GlideRoot.environment.aaYOffset[3][2] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y2",PRIBUFVTXOFFY_4SMPL_CHP1_DEF);
_GlideRoot.environment.aaYOffset[3][3] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y3",SECBUFVTXOFFY_4SMPL_CHP1_DEF);
/* these are the correct jitter vaules */
_GlideRoot.environment.aaXOffset[4][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[4][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[4][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[4][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[4][4] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[4][5] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[4][6] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[4][7] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][4] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][5] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][6] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[4][7] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][4] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][5] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X0",PRIBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][6] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[5][7] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_X1",SECBUFVTXOFFX_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][0] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][1] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][2] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][3] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][4] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][5] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y0",PRIBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][6] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[5][7] = GLIDE_34GETENV("FX_GLIDE_AA2_OFFSET_Y1",SECBUFVTXOFFY_2SMPL_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][0] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X0",PRIBUFVTXOFFX_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][1] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X1",SECBUFVTXOFFX_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][2] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X2",PRIBUFVTXOFFX_4SMPL_CHP1_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][3] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X3",SECBUFVTXOFFX_4SMPL_CHP1_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][4] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X0",PRIBUFVTXOFFX_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][5] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X1",SECBUFVTXOFFX_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][6] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X2",PRIBUFVTXOFFX_4SMPL_CHP1_CORRECT_DEF);
_GlideRoot.environment.aaXOffset[6][7] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_X3",SECBUFVTXOFFX_4SMPL_CHP1_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][0] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y0",PRIBUFVTXOFFY_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][1] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y1",SECBUFVTXOFFY_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][2] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y2",PRIBUFVTXOFFY_4SMPL_CHP1_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][3] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y3",SECBUFVTXOFFY_4SMPL_CHP1_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][4] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y0",PRIBUFVTXOFFY_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][5] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y1",SECBUFVTXOFFY_4SMPL_CHP0_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][6] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y2",PRIBUFVTXOFFY_4SMPL_CHP1_CORRECT_DEF);
_GlideRoot.environment.aaYOffset[6][7] = GLIDE_34GETENV("FX_GLIDE_AA4_OFFSET_Y3",SECBUFVTXOFFY_4SMPL_CHP1_CORRECT_DEF);
/* jcochrane 4 chip offsets */
/* 4chip 2xaa */
_GlideRoot.environment.aaXOffset[7][0] = 0x04;
_GlideRoot.environment.aaXOffset[7][1] = 0x00;
_GlideRoot.environment.aaXOffset[7][2] = 0x0c;
_GlideRoot.environment.aaXOffset[7][3] = 0x00;
_GlideRoot.environment.aaXOffset[7][4] = 0x04;
_GlideRoot.environment.aaXOffset[7][5] = 0x00;
_GlideRoot.environment.aaXOffset[7][6] = 0x0c;
_GlideRoot.environment.aaXOffset[7][7] = 0x00;
_GlideRoot.environment.aaYOffset[7][0] = 0x04;
_GlideRoot.environment.aaYOffset[7][1] = 0x00;
_GlideRoot.environment.aaYOffset[7][2] = 0x0c;
_GlideRoot.environment.aaYOffset[7][3] = 0x00;
_GlideRoot.environment.aaYOffset[7][4] = 0x04;
_GlideRoot.environment.aaYOffset[7][5] = 0x00;
_GlideRoot.environment.aaYOffset[7][6] = 0x0c;
_GlideRoot.environment.aaYOffset[7][7] = 0x00;
/* 4chip 4xaa */
_GlideRoot.environment.aaXOffset[8][0] = 0x06;
_GlideRoot.environment.aaXOffset[8][1] = 0x00;
_GlideRoot.environment.aaXOffset[8][2] = 0x0e;
_GlideRoot.environment.aaXOffset[8][3] = 0x00;
_GlideRoot.environment.aaXOffset[8][4] = 0x02;
_GlideRoot.environment.aaXOffset[8][5] = 0x00;
_GlideRoot.environment.aaXOffset[8][6] = 0x0a;
_GlideRoot.environment.aaXOffset[8][7] = 0x00;
_GlideRoot.environment.aaYOffset[8][0] = 0x02;
_GlideRoot.environment.aaYOffset[8][1] = 0x00;
_GlideRoot.environment.aaYOffset[8][2] = 0x06;
_GlideRoot.environment.aaYOffset[8][3] = 0x00;
_GlideRoot.environment.aaYOffset[8][4] = 0x0a;
_GlideRoot.environment.aaYOffset[8][5] = 0x00;
_GlideRoot.environment.aaYOffset[8][6] = 0x0e;
_GlideRoot.environment.aaYOffset[8][7] = 0x00;
/* 4chip 8xaa */
_GlideRoot.environment.aaXOffset[9][0] = 0x06;
_GlideRoot.environment.aaXOffset[9][1] = 0x04;
_GlideRoot.environment.aaXOffset[9][2] = 0x0e;
_GlideRoot.environment.aaXOffset[9][3] = 0x0a;
_GlideRoot.environment.aaXOffset[9][4] = 0x02;
_GlideRoot.environment.aaXOffset[9][5] = 0x0c;
_GlideRoot.environment.aaXOffset[9][6] = 0x0a;
_GlideRoot.environment.aaXOffset[9][7] = 0x06;
_GlideRoot.environment.aaYOffset[9][0] = 0x02;
_GlideRoot.environment.aaYOffset[9][1] = 0x06;
_GlideRoot.environment.aaYOffset[9][2] = 0x06;
_GlideRoot.environment.aaYOffset[9][3] = 0x04;
_GlideRoot.environment.aaYOffset[9][4] = 0x0a;
_GlideRoot.environment.aaYOffset[9][5] = 0x0a;
_GlideRoot.environment.aaYOffset[9][6] = 0x0e;
_GlideRoot.environment.aaYOffset[9][7] = 0x0c;
/*
* AJB- Support the slightly silly way the DirectX gang controls
* SLI & AA from the 3dfx tools control panel, just to make
* life a little easier for Reid.
*
* Here is a breakdown of the bizarre table of magic numbers:
*
* 0 - SLI & AA disable
* 1 - SLI disabled, 2 sample AA enabled
* 2 - 2-way SLI enabled, AA disabled
* 3 - 2-way SLI enabled, 2 sample AA enabled
* 4 - SLI disabled, 4 sample AA enabled
* 5 - 4-way SLI enabled, AA disabled
* 6 - 4-way SLI enabled, 2 sample AA enabled
* 7 - 2-way SLI enabled, 4 sample AA enabled
* 8 - SLI disabled, 8 sample AA enabled
*
* to add to the silliness:
*
* settings 0 & 1 are valid for all configurations
* settings 2, 3 & 4 are valid for 2 chip boards only
* settings 5, 6 & 7 are valid for 4 chip boards only
*
* to make life easier on everyone, we won't enforce the board
* type restriction and we will default to use whatever SLI
* is available with no AA if the variable cannot be found.
*/
_GlideRoot.environment.forceSingleChip = 0 ;
_GlideRoot.environment.aaSample = 0 ;
switch(GLIDE_GETENV("SSTH3_SLI_AA_CONFIGURATION", 2))
{
case 1:
_GlideRoot.environment.aaSample = 2 ;
case 0:
_GlideRoot.environment.forceSingleChip = 1 ;
break ;
case 3:
case 6:
_GlideRoot.environment.aaSample = 2 ;
break ;
case 4:
case 7:
_GlideRoot.environment.aaSample = 4 ;
break;
//8xaa
case 8:
_GlideRoot.environment.aaSample = 8 ;
break ;
default:
break ;
}
/*
** AJB- This lets Joe bag-o-donuts force 32bpp & AA rendering
** for apps that call grSstWinOpen.
*/
_GlideRoot.environment.outputBpp = GLIDE_GETENV("FX_GLIDE_BPP", 0L) ;
/* Note- If the old school Glide env. vars for AA sample & Num chips
* are active, they should ALWAYS override the control panel variable
*/
if (GETENV("FX_GLIDE_AA_SAMPLE"))
_GlideRoot.environment.aaSample = atol(GETENV("FX_GLIDE_AA_SAMPLE")) ;
if (GLIDE_GETENV("FX_GLIDE_NUM_CHIPS", 0) > 1)
_GlideRoot.environment.forceSingleChip = 0 ;
/*
** CHD - This let's Joe bag-o-croissant force rendering-column width.
*/
_GlideRoot.environment.columnWidth = GLIDE_GETENV("FX_GLIDE_COLUMN_WIDTH",
32L) ;
/*
* AJB- This lets those lucky people with non-flaky SLI slave chips
* enable the WAX functions that cause us unlucky folks to hang.
*/
_GlideRoot.environment.waxon = GLIDE_GETENV("FX_GLIDE_WAX_ON", 1L) ;
/*
* KCD- Let user toggle AA on and off on the fly to impress their friends.
*/
_GlideRoot.environment.aaToggleKey = GLIDE_GETENV("FX_GLIDE_AA_TOGGLE_KEY", 0L) ;
/* Save off 32-bit screenshots from four-sample 16-bit AA buffers */
_GlideRoot.environment.aaScreenshotKey = GLIDE_GETENV("FX_GLIDE_SCREENSHOT_KEY", 0L) ;
/* Which way to do 2-sample AA? */
_GlideRoot.environment.forceOldAA = GLIDE_GETENV("FX_GLIDE_FORCE_OLD_AA", 0L);
/*
* AJB- 1= Always analog sli, 0= Glide decides, -1= always digital
*/
_GlideRoot.environment.analogSli = GLIDE_GETENV("FX_GLIDE_ANALOG_SLI", 0L) ;
_GlideRoot.environment.lodBias = GLIDE_GETENV("FX_GLIDE_LOD_BIAS", 0L) ;
/******************************************************************
* 5/4/99 gregk
* Adding user support for turning on/off dither substraction
* According to Alpha Blending Quality Tab of control panel choices
* Optimal/Sharper -> disable dither subtraction
* Smoother -> enable dither subtraction
******************************************************************/
ditherMode = GLIDE_GETENV("SSTH3_ALPHADITHERMODE", 1L);
switch(ditherMode)
{
default:
case OPTIMAL: /* Or Automatic? */
case SHARPER:
_GlideRoot.environment.disableDitherSub = FXTRUE;
break;
case SMOOTHER:
_GlideRoot.environment.disableDitherSub = FXFALSE;
break;
}
GDBG_INFO(80," disableDitherSub: %d\n",_GlideRoot.environment.disableDitherSub);
_GlideRoot.environment.texLodDither = GLIDE_GETENV("FX_GLIDE_LOD_DITHER", 0L) ? SST_TLODDITHER : 0;
GDBG_INFO(80," texLodDither: %d\n",_GlideRoot.environment.texLodDither);
_GlideRoot.environment.nColorBuffer = GLIDE_GETENV("FX_GLIDE_ALLOC_COLOR", -1L);
GDBG_INFO(80," nColorBuffer: %d\n",_GlideRoot.environment.nColorBuffer);
_GlideRoot.environment.tmuMemory = GLIDE_GETENV("FX_GLIDE_TMU_MEMSIZE", -1L);
GDBG_INFO(80,"\ttmuMemory: %d\n",_GlideRoot.environment.tmuMemory);
_GlideRoot.environment.nAuxBuffer = GLIDE_GETENV("FX_GLIDE_ALLOC_AUX", -1L);
GDBG_INFO(80," nAuxBuffer: %d\n",_GlideRoot.environment.nAuxBuffer);
_GlideRoot.environment.swFifoLWM = GLIDE_GETENV("FX_GLIDE_LWM", -1L);
GDBG_INFO(80," swFifoLWM: %d\n",_GlideRoot.environment.swFifoLWM);
_GlideRoot.environment.swapInterval = GLIDE_GETENV("FX_GLIDE_SWAPINTERVAL", 0);
GDBG_INFO(80," swapInterval: %d\n",_GlideRoot.environment.swapInterval);
_GlideRoot.environment.snapshot = GLIDE_GETENV("FX_SNAPSHOT", -1L);
GDBG_INFO(80," snapshot: %d\n",_GlideRoot.environment.snapshot);
_GlideRoot.environment.guardbandclipping = GLIDE_GETENV("FX_GLIDE_GBC", 1L);
GDBG_INFO(80," guardbandclipping: %d\n",_GlideRoot.environment.guardbandclipping);
_GlideRoot.environment.do2ppc = GLIDE_GETENV("FX_GLIDE_2PPC", 1L);
GDBG_INFO(80," do2ppc : %d\n",_GlideRoot.environment.do2ppc);
_GlideRoot.environment.band2ppc = GLIDE_GETENV("FX_GLIDE_2PPC_BAND", 2L);
GDBG_INFO(80," band2ppc : %d\n",_GlideRoot.environment.band2ppc);
_GlideRoot.environment.sliBandHeight = GLIDE_GETENV("FX_GLIDE_SLI_BAND_HEIGHT", 0L);
GDBG_INFO(80," sliBandHeight : %d\n",_GlideRoot.environment.sliBandHeight);
_GlideRoot.environment.sliBandHeightForce = GLIDE_GETENV("FX_GLIDE_FORCE_SLI_BAND_HEIGHT", 0L);
GDBG_INFO(80," sliBandHeightForce : %d\n",_GlideRoot.environment.sliBandHeightForce);
_GlideRoot.environment.swapPendingCount = GLIDE_GETENV("FX_GLIDE_SWAPPENDINGCOUNT", 1L);
if (_GlideRoot.environment.swapPendingCount > 3)
_GlideRoot.environment.swapPendingCount = 3;
if (_GlideRoot.environment.swapPendingCount < 0)
_GlideRoot.environment.swapPendingCount = 0;
GDBG_INFO(80," swapPendingCount : %d\n",_GlideRoot.environment.swapPendingCount);
_GlideRoot.environment.gammaR = GLIDE_FGETENV("SSTH3_RGAMMA", -1.f);
_GlideRoot.environment.gammaG = GLIDE_FGETENV("SSTH3_GGAMMA", -1.f);
_GlideRoot.environment.gammaB = GLIDE_FGETENV("SSTH3_BGAMMA", -1.f);
_GlideRoot.environment.useAppGamma = GLIDE_GETENV("FX_GLIDE_USE_APP_GAMMA", 1L);
_GlideRoot.CPUType = GLIDE_GETENV("FX_CPU", _cpu_detect_asm() );
GDBG_INFO(0," cpu: 0x%x\n",_GlideRoot.CPUType);
/* Setup the basic proc tables based on the cpu type. */
{
/* Default case - rasterization routines */
_GlideRoot.deviceArchProcs.curTriProcs = _triSetupProcs 0;
_GlideRoot.deviceArchProcs.curDrawTrisProc = _grDrawTriangles_Default;
_GlideRoot.deviceArchProcs.curVertexListProcs = _vertexListProcs[0];
/* Default case - texture download procs */
_GlideRoot.deviceArchProcs.curTexProcs = _texDownloadProcs 0;
/* null proc case */
#define ARRAY_LAST(__array) ((sizeof(__array) / sizeof((__array)[0])) - 1)
_GlideRoot.deviceArchProcs.nullTriProcs = _triSetupProcs ARRAY_LAST(_triSetupProcs);
_GlideRoot.deviceArchProcs.nullDrawTrisProc = _grDrawTriangles_null;
_GlideRoot.deviceArchProcs.nullVertexListProcs = _vertexListProcs[ARRAY_LAST(_vertexListProcs)];
_GlideRoot.deviceArchProcs.nullTexProcs = _texDownloadProcs ARRAY_LAST(_texDownloadProcs);
#undef ARRAY_LAST
/* Check for vendor specific optimization cases */
switch((_GlideRoot.CPUType & 0xFFFF0000UL) >> 16UL) {
case kCPUVendorIntel:
break;
#if GL_AMD3D
case kCPUVendorAMD:
case kCPUVendorCyrix:
case kCPUVendorIDT:
if ((_GlideRoot.CPUType & 0x2L) == 0x2UL) { /* MMX and 3DNow! feature bits set */
_GlideRoot.deviceArchProcs.curTriProcs = _triSetupProcs 1;
_GlideRoot.deviceArchProcs.curDrawTrisProc = _grDrawTriangles_3DNow;
_GlideRoot.deviceArchProcs.curVertexListProcs = _vertexListProcs[1];
_GlideRoot.deviceArchProcs.curTexProcs = _texDownloadProcs 1;
}
break;
#endif /* GL_AMD3D */
case kCPUVendorUnknown:
default:
break;
}
}
#if __POWERPC__ && PCI_BUMP_N_GRIND
_GlideRoot.environment.autoBump = FXFALSE;
#else
_GlideRoot.environment.autoBump = GETENV("FX_GLIDE_BUMP") == NULL;
#endif
GDBG_INFO(80, "\tautoBump: %s\n",
_GlideRoot.environment.autoBump ? "FXTRUE" : "FXFALSE");
if (GETENV("FX_GLIDE_BUMPSIZE"))
sscanf(GETENV("FX_GLIDE_BUMPSIZE"), "%x",
&_GlideRoot.environment.bumpSize);
else
#if __POWERPC__
_GlideRoot.environment.bumpSize = 0x1000;
#else
_GlideRoot.environment.bumpSize = 0x10000;
#endif
_GlideRoot.environment.fenceLimit =
GLIDE_GETENV("FX_GLIDE_FENCE_LIMIT", 0x10000);
if (_GlideRoot.environment.fenceLimit > 0x10000)
_GlideRoot.environment.fenceLimit = 0x10000;
/* Pre-convert the bump size from bytes to words */
_GlideRoot.environment.bumpSize >>= 2UL;
GDBG_INFO(80, "\tbumpSize: 0x%x\n", _GlideRoot.environment.bumpSize);
/* constant pool */
_GlideRoot.pool.f0 = 0.0F;
_GlideRoot.pool.fHalf= 0.5F;
_GlideRoot.pool.f1 = 1.0F;
_GlideRoot.pool.f255 = 255.0F;
#if GLIDE_PACKED_RGB
_GlideRoot.pool.fBiasHi = (float)(0x01 << 15);
_GlideRoot.pool.fBiasLo = (float)(0x01 << 23);
#endif /* GLIDE_PACKED_RGB */
_GlideRoot.current_sst = 0; /* make sure there's a valid GC */
grErrorSetCallback(_grErrorDefaultCallback);
if ( !_grSstDetectResources() ) {
#ifdef GLIDE_INIT_HWC
GrErrorCallback( hwcGetErrorString(), FXTRUE );
#endif
}
for (i = 0; i < _GlideRoot.hwConfig.num_sst; i ) {
displayBoardInfo(i, &_GlideRoot.hwConfig);
}
_GlideRoot.initialized = FXTRUE; /* save this for the end */
} /* _GlideInitEnvironment */
#if (GLIDE_PLATFORM & GLIDE_OS_WIN32)
BOOL WINAPI
DllMain(HANDLE hInst, ULONG ul_reason_for_call, LPVOID lpReserved)
{
switch( ul_reason_for_call ) {
case DLL_PROCESS_DETACH:
GDBG_INFO(80, "DllMain: DLL_PROCESS_DETACH\n");
grGlideShutdown();
#ifdef GLIDE_INIT_HWC
hwcUnmapMemory();
hwcClearContextData();
#endif
/* A clear thinking person might assume that this should go
* in grGlideShutdown, however Microsoft claims it should
* go here in DLL_PROCESS_DETACH... More importantly, moving
* this call to here fixes PRS#12190, 12192 and 12196
* (several games that like to do wacky crap with threads).
*/
freeThreadStorage();
break;
case DLL_PROCESS_ATTACH:
GDBG_INFO(80, "DllMain: DLL_PROCESS_ATTACH\n");
break;
case DLL_THREAD_ATTACH:
GDBG_INFO(80, "DllMain: DLL_THREAD_ATTACH\n");
/* If we're in the fullscreen case it is legal to call into glide
* from multiple threads, but the application is required to do
* their own thread syncronization w/ glide as a single resource.
* If we've already checked for the hw and they have called
* grSstWinOpen at least once to open a fullscreen context then we
* need to attach the current context (eg. the gc) to the current tls.
*/
if (_GlideRoot.initialized && /* scanned for hw? */
(_GlideRoot.windowsInit > 0)) { /* outstanding fullscreen contexts? */
GR_DCL_GC;
/* If there is no current gc in tls then set the current context. */
if (gc == NULL) setThreadValue((AnyPtr)&_GlideRoot.GCs[_GlideRoot.current_sst]);
}
break;
case DLL_THREAD_DETACH:
GDBG_INFO(80, "DllMain: DLL_THREAD_DETACH\n");
break;
default:
GDBG_INFO(80, "DllMain: Unhandled message.\n");
break;
}
return TRUE;
} /* DllMain */
#endif
|