Subject: Fix many typos in the documentation
Last-Update: 2010-05-12
--- a/doc/README
    b/doc/README
@@ -303,7  303,7 @@
  Included utilities:
  ===================
 
- 1. floppycontrol. This program sets the various error tresholds
  1. floppycontrol. This program sets the various error thresholds
 (error reporting, operation abortion, and read track), prints out
 drive drive types, and flushes buffers. There is a -h help option.
  This program provides examples on how to use the new ioctl's.
--- a/doc/fdrawcmd.1
    b/doc/fdrawcmd.1
@@ -81,7  81,7 @@
 .in  0.3i
 \&\fR\&\f(CWfdrawcmd [\fR\&\f(CWdrive=\fIdrive\fR\&\f(CW] [\fR\&\f(CWrate=\fIrate\fR\&\f(CW]
 [\fR\&\f(CWlength=\fIlength\fR\&\f(CW] [\fR\&\f(CWrepeat=\fIrepeat\fR\&\f(CW]
-[\fR\&\f(CWcylinder=\fIphysical-cyl\fR\&\f(CW] \fIcommand\fR\&\f(CW [\fIparamters\fR\&\f(CW \&...] [\fImode\fR\&\f(CW]
 [\fR\&\f(CWcylinder=\fIphysical-cyl\fR\&\f(CW] \fIcommand\fR\&\f(CW [\fIparameters\fR\&\f(CW \&...] [\fImode\fR\&\f(CW]
 .fi
 .in -0.3i
 .ft R
@@ -233,12  233,12 @@
 Sets the perpendicular mode.  Use 0 for normal, 2 for 500kb/s
 perpendicular, and 3 for 1 Mb/s perpendicular.
 .TP
-\&\fR\&\f(CWseek-out\ \fIdrvsel\ n\fR\&\f(CW\fR\ 
 \&\fR\&\f(CWseek_out\ \fIdrvsel\ n\fR\&\f(CW\fR\ 
 does a relative seek of
 \&\fIn\fR
 cylinders towards cylinder 0.
 .TP
-\&\fR\&\f(CWseek-in\ \ \fIdrvsel\ n\fR\&\f(CW\fR\ 
 \&\fR\&\f(CWseek_in\ \ \fIdrvsel\ n\fR\&\f(CW\fR\ 
 does a relative seek of \fIn\fR cylinders away from cylinder 0.
 .PP
 .SS Commands\ available\ on\ 82077AA\ and\ later
--- a/doc/fdrawcmd.texi
    b/doc/fdrawcmd.texi
@@ -8,7  8,7 @@
 @example
 @code{fdrawcmd} [@code{drive=}@var{drive}] [@code{rate=}@var{rate}]
 [@code{length=}@var{length}] [@code{repeat=}@var{repeat}]
-[@code{cylinder=}@var{physical-cyl}] @var{command} [@var{paramters} @dots{}] [@var{mode}]
 [@code{cylinder=}@var{physical-cyl}] @var{command} [@var{parameters} @dots{}] [@var{mode}]
 @end example
 
 @code{fdrawcmd}
@@ -158,12  158,12 @@
 Sets the perpendicular mode.  Use 0 for normal, 2 for 500kb/s
 perpendicular, and 3 for 1 Mb/s perpendicular.
 
-@item seek-out @var{drvsel n}
 @item seek_out @var{drvsel n}
 does a relative seek of
 @var{n}
 cylinders towards cylinder 0.
 
-@item seek-in  @var{drvsel n}
 @item seek_in  @var{drvsel n}
 does a relative seek of @var{n} cylinders away from cylinder 0.
 @end table
 
--- a/doc/floppycontrol.1
    b/doc/floppycontrol.1
@@ -578,28  578,28 @@
 are performed at the next retry. The counter is reset when the read or
 write finally terminates, whether successfully or not.
 .TP
-\&\fR\&\f(CW-a\ \fIoperation-abort-trshld\fR\&\f(CW\ \fR\ 
 \&\fR\&\f(CW-a\ \fIoperation-abort-threshold\fR\&\f(CW\ \fR\ 
 .TQ
-\&\fR\&\f(CW--abort\ \fI\ operation-abort-trshld\fR\&\f(CW\fR
 \&\fR\&\f(CW--abort\ \fI\ operation-abort-threshold\fR\&\f(CW\fR
 Tell the floppy driver to stop trying to read/write a sector after
-\&\fIoperation-abort-trshld\fR
 \&\fIoperation-abort-threshold\fR
 retries, and signal the I/O error to the user.
 .TP
-\&\fR\&\f(CW-t\ \fIread-track-trshld\fR\&\f(CW\ \fR\ 
 \&\fR\&\f(CW-t\ \fIread-track-threshold\fR\&\f(CW\ \fR\ 
 .TQ
-\&\fR\&\f(CW--readtrack\ \fI\ read-track-trshld\fR\&\f(CW\fR
 \&\fR\&\f(CW--readtrack\ \fI\ read-track-threshold\fR\&\f(CW\fR
 Tell the floppy driver to switch from track-reading mode to
 sector-at-a-time-mode after
-\&\fIread-track-trshld\fR
 \&\fIread-track-threshold\fR
 retries.
 .TP
-\&\fR\&\f(CW-r\ \fIrecalibrate-trshld\fR\&\f(CW\ \fR\ 
 \&\fR\&\f(CW-r\ \fIrecalibrate-threshold\fR\&\f(CW\ \fR\ 
 .TQ
-\&\fR\&\f(CW--recalibrate\ \fI\ recalibrate-trshld\fR\&\f(CW\fR
 \&\fR\&\f(CW--recalibrate\ \fI\ recalibrate-threshold\fR\&\f(CW\fR
 Tell the floppy driver to recalibrate the drive after
-\&\fIrecalibrate-trshld\fR retries.
 \&\fIrecalibrate-threshold\fR retries.
 .TP
-\&\fR\&\f(CW-R\ \fIreset-treshold\fR\&\f(CW\ \fR\ 
 \&\fR\&\f(CW-R\ \fIreset-threshold\fR\&\f(CW\ \fR\ 
 .TQ
 \&\fR\&\f(CW--reset\ \fI\ reset-threshold\fR\&\f(CW\fR
 Tell the floppy driver to reset the controller after
@@ -607,11  607,11 @@
 driver also recalibrates all drives connected to that controller.
 .IP
 .TP
-\&\fR\&\f(CW-e\ \fIerror-report-trshld\fR\&\f(CW\ \fR\ 
 \&\fR\&\f(CW-e\ \fIerror-report-threshold\fR\&\f(CW\ \fR\ 
 .TQ
-\&\fR\&\f(CW--reporting\ \fI\ error-report-trshld\fR\&\f(CW\fR
 \&\fR\&\f(CW--reporting\ \fI\ error-report-threshold\fR\&\f(CW\fR
 Tell the floppy driver to start printing error messages to the console
-after \fIerror-report-trshld\fR retries.
 after \fIerror-report-threshold\fR retries.
 .PP
 .SH Write\ error\ reporting
 .PP
--- a/doc/floppycontrol.texi
    b/doc/floppycontrol.texi
@@ -504,34  504,34 @@
 are performed at the next retry. The counter is reset when the read or
 write finally terminates, whether successfully or not.
 @table @code
-@item -a @var{operation-abort-trshld} 
-@itemx --abort @var{ operation-abort-trshld}
 @item -a @var{operation-abort-threshold} 
 @itemx --abort @var{ operation-abort-threshold}
 Tell the floppy driver to stop trying to read/write a sector after
-@var{operation-abort-trshld}
 @var{operation-abort-threshold}
 retries, and signal the I/O error to the user.
 
-@item -t @var{read-track-trshld} 
-@itemx --readtrack @var{ read-track-trshld}
 @item -t @var{read-track-threshold} 
 @itemx --readtrack @var{ read-track-threshold}
 Tell the floppy driver to switch from track-reading mode to
 sector-at-a-time-mode after
-@var{read-track-trshld}
 @var{read-track-threshold}
 retries.
-@item -r @var{recalibrate-trshld} 
-@itemx --recalibrate @var{ recalibrate-trshld}
 @item -r @var{recalibrate-threshold} 
 @itemx --recalibrate @var{ recalibrate-threshold}
 Tell the floppy driver to recalibrate the drive after
-@var{recalibrate-trshld} retries.
 @var{recalibrate-threshold} retries.
 
-@item -R @var{reset-treshold} 
 @item -R @var{reset-threshold} 
 @itemx --reset @var{ reset-threshold}
 Tell the floppy driver to reset the controller after
 @var{reset-threshold} retries. After a controller reset, the floppy
 driver also recalibrates all drives connected to that controller.
 
 
-@item -e @var{error-report-trshld} 
-@itemx --reporting @var{ error-report-trshld}
 @item -e @var{error-report-threshold} 
 @itemx --reporting @var{ error-report-threshold}
 Tell the floppy driver to start printing error messages to the console
-after @var{error-report-trshld} retries.
 after @var{error-report-threshold} retries.
 @end table
 
 
--- a/doc/floppymeter.1
    b/doc/floppymeter.1
@@ -111,7  111,7 @@
 issued many times in a row. During this phase, the number of rotations
 til the start of the test, the average time per rotation til the start,
 and a sliding average of the times of the last 30 rotations is printed,
-and updated continously.
 and updated continuously.
 .PP
 The data transfer rate is deduced from the two parameters above.
 .PP
@@ -149,7  149,7 @@
 .TP
 \&\fR\&\f(CW-f\fR\ 
 Runs the measurement non interactively.  With this option, the program
-doesn't ask for confirmation, and doesn't display the continously
 doesn't ask for confirmation, and doesn't display the continuously
 updated values during the rotation speed measurement.
 .TP
 \&\fR\&\f(CW-W\ \fIWindow\fR\&\f(CW\fR\ 
--- a/doc/floppymeter.texi
    b/doc/floppymeter.texi
@@ -33,7  33,7 @@
 issued many times in a row. During this phase, the number of rotations
 til the start of the test, the average time per rotation til the start,
 and a sliding average of the times of the last 30 rotations is printed,
-and updated continously.
 and updated continuously.
 
 The data transfer rate is deduced from the two parameters above.
 
@@ -72,7  72,7 @@
 
 @item -f
 Runs the measurement non interactively.  With this option, the program
-doesn't ask for confirmation, and doesn't display the continously
 doesn't ask for confirmation, and doesn't display the continuously
 updated values during the rotation speed measurement.
 
 @item -W @var{Window}
--- a/doc/makefloppies.1
    b/doc/makefloppies.1
@@ -1,4  1,4 @@
-.TH makefloppies 1 "03Mar05" fdutils-5.5
 .TH makefloppies 8 "03Mar05" fdutils-5.5
 .SH Name
 MAKEFLOPPIES - Creates the default floppy device nodes.
 '\" t
--- a/doc/superformat.1
    b/doc/superformat.1
@@ -102,7  102,7 @@
 \&\fR\&\f(CWmformat\fR in order to put an MS-DOS filesystem on it. You may
 ignore this filesystem, if you don't need it.
 .PP
-Supeformat allows to format 2m formats.  Be aware, however, that these
 Superformat allows to format 2m formats.  Be aware, however, that these
 \&\fR\&\f(CW2m\fR formats were specifically designed to hold an MS-DOS
 filesystem, and that they take advantage of the fact that the MS-DOS
 filesystem uses redundant sectors on the first track (the FAT, which is
@@ -293,7  293,7 @@
  
 \&\fR
 .PP
-N.B. For simplicitie's sake, this example expresses skews in units of
 N.B. For simplicity's sake, this example expresses skews in units of
 sectors. In reality, superformat expects the skews to be expressed in
 raw bytes.
 .PP
--- a/doc/superformat.texi
    b/doc/superformat.texi
@@ -24,7  24,7 @@
 @code{mformat} in order to put an MS-DOS filesystem on it. You may
 ignore this filesystem, if you don't need it.
 
-Supeformat allows to format 2m formats.  Be aware, however, that these
 Superformat allows to format 2m formats.  Be aware, however, that these
 @code{2m} formats were specifically designed to hold an MS-DOS
 filesystem, and that they take advantage of the fact that the MS-DOS
 filesystem uses redundant sectors on the first track (the FAT, which is
@@ -216,7  216,7 @@
 track 2 head 1: 3,4,5,6,1,2	(skew=4)
 @end example
 
-N.B. For simplicitie's sake, this example expresses skews in units of
 N.B. For simplicity's sake, this example expresses skews in units of
 sectors. In reality, superformat expects the skews to be expressed in
 raw bytes.
 
--- a/doc/utilities.texi
    b/doc/utilities.texi
@@ -6,7  6,7 @@
 @table @code
 @item floppycontrol
 
-This program sets the various error tresholds (error reporting,
 This program sets the various error thresholds (error reporting,
 operation abortion, and read track), prints out drive drive types, and
 flushes buffers. There is a -h help option.
 This program provides examples on how to use the new ioctl's.