Best Small Business Thermal Analysis Software

SimScale is a cloud-based web application that plays a key part in simulation software for many kinds of industries. The platform allows the use of Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA), and Thermal Simulation. It also offers 3D simulation, continuous modeling, and motion & dynamic modeling.

Based on computational physics, Energy2D is an interactive multiphysics simulation program that models all three modes of heat transfer, conduction, convection, and radiation, and their coupling with particle dynamics. Energy2D runs quickly on most computers and eliminates the switches among preprocessors, solvers, and postprocessors typically needed to perform computational fluid dynamics simulations. It allows you to design "computational experiments" to test a scientific hypothesis or solve an engineering problem without resorting to complex mathematics. Work is also underway to incorporate other types of energy transformations and support multiple types of fluids. The conduction part of Energy2D is highly accurate, but the convection and radiation parts are not 100% accurate. Hence, in cases that involve convection and radiation, Energy2D results should be considered qualitative. More than 40 scientific papers have used Energy2D as a research tool.

FloCAD® is a fluid dynamics software add-on module for Thermal Desktop®, together they provide a complete thermohydraulic software tool for fully integrated fluid flow and heat transfer analysis. With FloCAD, the mechanics of building fluid flow models is very similar to that of building thermal models, with many of the commands applicable to both types of models. FloCAD models can be free-form (non-geometric), sketchpad style flow network modeling for abstraction and simplification, or they can be geometry-based by including objects such as pipe centerlines and cross-sections, complexly shaped vessels, or convection to finite difference of finite element representations of thermal structures. As a generalized pipe flow software tool, FloCAD captures the pressure drops in a piping network due to bends, valves, tees, changes in flow area, etc.

Ansys Sherlock is the only reliability physics-based electronics design tool that provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early stage design. Ansys Sherlock automated design analysis provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early design stages. Sherlock bypasses the ‘test-fail-fix-repeat’ cycle by empowering designers to accurately model silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. With embedded libraries containing over 500,000 parts, Sherlock rapidly converts electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each model contains accurate geometries, material properties and translates stress information.

With more than 34 years of development and user feedback, Simcenter Flotherm is the leading electronic cooling simulation software solution for electronic thermal analysis. It shortens development at IC package, PCB, and enclosure level through to large systems such as data centers. Improve electronics thermal management for reliability with fast, accurate electronics cooling CFD simulation from initial pre-CAD exploration to final verification. Simcenter Flotherm integrates with the electronics development workflow as a tool for thermal engineers to perform simulations and provide timely accurate results and feedback to other engineering functions. It supports thermal management, and simulation-based decision-making from early-stage architecture to final thermal design verification. This aids shortened development and also helps to eliminate risks of costly reliability-related warranty costs or any late-stage re-spins.

ColdStream is a cloud-native thermal simulation engineering platform that supports your entire thermal management and cooling design process, from thermal analysis to thermal design. Diabatix's thermal simulation software lets your business speed up product development using only state-of-the-art technologies. Get essential heat transfer analyses and insights into temperature distribution, heat dissipation, fluid flow, thermal resistance, thermal radiation, cooling capacity, and more. Do not spend more time looking for the best-suited heat sinks to cool your electronic devices and products, let ColdStream do this for you. You can upload the geometry, configure the thermal simulation operating conditions, and set up the design objectives of your heat sinks in just a few clicks.

Your PerkinElmer thermal analysis instruments and data come to life on the Pyris™ software platform, the benchmark in high-sensitivity thermal analysis. Pyris is the preferred choice in thermal analysis because it is intuitive and user-friendly, and provides a wide range of standard features and capabilities for maximum flexibility. Whether in a totally automated research laboratory, an automated QA/QC lab, or a stand-alone instrument, you can be sure that the Pyris software meets your operating requirements. To ensure the highest user satisfaction, we designed and continuously enhanced Pyris software based on customer feedback. A common platform for all instruments makes it easy to use and quick to learn. Pyris software is easy to use without losing capabilities. The software has been designed to allow you to conduct data acquisition and analysis in one window, and run multiple analyzers simultaneously. A wide range of analysis options, and data import/export flexibility.

An ultra-fast, oct-tree accelerated Monte-Carlo ray tracing algorithm is used by RadCAD to compute radiation exchange factors and view factors. Innovations by C&R Technologies to the ray tracing process have resulted in an extremely efficient thermal radiation software tool. Using finite difference "conics" (simple geometric objects) or curved finite elements from TD Direct®, RadCAD can accurately model diffuse or specular reflections and transmissive surfaces regardless of node density. The needs of the thermal solution dictate the number of nodes, not the accuracy requirements of the radiation. RadCAD makes use of user-defined databases of optical properties. Each surface coating defines absorptivity, transmissivity, and reflectivity along with specularity in both the solar and infrared wavelength regimes. These properties can be defined versus incident angle or even with wavelength dependence.

For decades, SINDA/FLUINT has provided users with proven and powerful heat transfer and fluids analysis capabilities that continue to expand each year. SINDA/FLUINT is a comprehensive, generalized tool for simulating complex thermal/fluid systems such as those found in the electronics, automotive, petrochemical, power generation, medical, and aerospace industries. SINDA/FLUINT saves time and money by making the design process faster and easier, letting you gain a better understanding of your complex system. You control what is important and how to get the answer to your design performance questions using the most efficient approach. Furthermore, the application is completely extensible making it perhaps the most versatile thermal and fluids software product on the market. You choose the features you want, decide what levels of accuracy and approximation are appropriate, and what outputs are needed.

6SigmaET is an electronics thermal modeling tool that uses advanced computational fluid dynamics (CFD) to create accurate models of electronic equipment. Designed specifically for the electronics industry, our thermal simulation software ushers in unparalleled intelligence, automation and accuracy to help you meet your requirements and overcome thermal design challenges. Since its inception in 2009, 6SigmaET has become the fastest-growing thermal simulation software in the electronics cooling market. The versatility of 6SigmaET allows you to simulate the thermal performance of electronic components: ranging from the smallest ICs to the largest, most powerful servers. Learn more about 6SigmaET's value to your industry by watching one of our videos or exploring our case studies. The complete CAD geometry of a device and PCB design can be imported into 6SigmaET for thermal analysis, reducing model creation time.

Ansys Fluent is the industry-leading fluid simulation software known for its advanced physics modeling capabilities and industry leading accuracy. Ansys Fluent gives you more time to innovate and optimize product performance. Trust your simulation results with a software that has been extensively validated across a wide range of applications. With Ansys Fluent, you can create advanced physics models and analyze a variety of fluids phenomena—all in a customizable and intuitive space. Accelerate your design cycle with this powerful fluid simulation software. Ansys Fluent contains the best-in class physics models and can accurately and efficiently solve large , complex models. Ansys Fluent unlocks new potentials for CFD analysis. A fluid simulation software with fast pre-processing and faster solve times to help you be the fastest to break into the market. Fluent’s industry leading features enable limitless innovation, while never making a compromise on accuracy.

MSC Nastran is a multidisciplinary structural analysis application used by engineers to perform static, dynamic, and thermal analysis across the linear and nonlinear domains, complemented with automated structural optimization and award winning embedded fatigue analysis technologies, all enabled by high performance computing. Engineers use MSC Nastran to ensure structural systems have the necessary strength, stiffness, and life to preclude failure (excess stresses, resonance, buckling, or detrimental deformations) that may compromise structural function and safety. MSC Nastran is also used to improve the economy and passenger comfort of structural designs. Optimize the performance of existing designs or develop unique product differentiators, leading to industry advantages over competitors. Remedy structural issues that may occur during a product’s service, reducing downtime and costs.

Simcenter Nastran is a premier finite element method (FEM) solver for computational performance, accuracy, reliability and scalability. Simcenter Nastran includes powerful solutions for linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. The advantage to having all these solutions available in a single solver is that input/output file formats are the same for all solution types, which greatly simplifies modeling processes. Available as a standalone enterprise solver or as an integrated solver in Simcenter 3D, Simcenter Nastran helps manufacturers as well as engineering suppliers in aerospace, automotive, electronics, heavy machinery, medical device, and other industries for their critical engineering computing needs so they can produce safe, reliable and optimized designs within ever shorter design cycles.

AnyCasting Software is a top-tier casting simulation program, for over 20 years. Currently, we are working with companies manufacturing automobiles, ships, heavy material industries, and electronic manufacturing companies having sold over 600 copies worldwide solving and providing technical consulting for projects over 470 times all over the world. AnyCasting provides stress analysis, which can help users simulate deformation and heat and stress analysis. It also provides automatic mold designing while being able to help users create the most optimal mold design. Some of the satisfied customers domestically include Hyundai Motors, Hyundai Heavy Industries, Samsung Electronics, LG Electronics, and more. Easily identify the location of gas defects caused by the isolation of air during the filling and flow process of the melt. Our software locates gas defects by comparing the pressure of air versus the pressure of the melt.

Capture the power of natural solidification thermal analyses within an affordable and capable software package. CAPlite features a step-by-step graphical interface, making it ideal even for those not experienced in casting software. Starting with a CAD design, CAPlite guides you through every step, from meshing to post-processing. Natural solidifications are effective thermal simulation that gives results within minutes. From die casting to sand casting, CAPlite can identify problems for all casting types. The simplicity of natural solidifications enables them to augment your entire casting operation at every stage: design risers, gating, and chill configurations to identify defects, or simply help visualize the otherwise abstract process of solidification. CAPlite comes with the power of natural solidifications plus more to give you the tools you need to improve your castings at a fraction of the cost.

CoTherm is a coupling and process automation software that acts as an ambassador between CAE programs. CoTherm makes process automation simple. It is useful for running sensitivity studies, a design of experiments, or running multiple CAE models as part of a single process. This capability can streamline pre-processing, transient analysis thermal analysis, or post-processing. With a CoTherm software license, we provide templates for common coupling or automation tasks. CoTherm includes optimization capabilities that determine which inputs used in your design are the best choice. Any CAE analysis can be optimized using the general optimization sub-processes. CoTherm's mathematically rigorous solution (including multiple global and local methods) removes guesswork and complexity from your design process. CoTherm natively supports many popular thermal and CFD codes. CoTherm's powerful tools allow the coupling of any software that can run in the command line or with config files.

Simcenter MAGNET is a powerful electromagnetic field simulation solution for performance prediction of motors, generators, sensors, transformers, actuators, solenoids, or any component with permanent magnets or coils. Simcenter MAGNET helps you predict the performance of any component with permanent magnets or coils. Perform low-frequency electromagnetic field simulations. Simcenter MAGNET includes capabilities to accurately model the physics of electromagnetic devices. This includes the ability to model manufacturing processes, temperature-dependent material properties, magnetization and de-magnetization modeling, and vector hysteresis models among others. Simcenter MAGNET also has a built-in motion solver with a six-degree-of-freedom capability. It allows for complex problems like magnetic levitation or complex motion to be accurately modeled and analyzed. This is made possible with a unique smart re-meshing technology.

Our STARe software is the standard in thermal analysis, providing nearly limitless evaluation possibilities. Its unique features include modularity, flexibility, and automation. The software also helps you to remain compliant within a regulated industry. All of our thermal analysis systems are controlled from one powerful software platform. We offer a comprehensive line of thermal analysis systems with the best variety of instruments. Our thermal analysis software STARe is powerful and easy to use. Measurements and experiments are sent to the instruments, and the resulting curves can then be evaluated immediately based on the user’s wishes. STARe sets the standard for thermal analysis software. It is an extremely versatile software that offers extreme flexibility and almost limitless evaluation possibilities. STARe is a comprehensive software that powers all of METTLER TOLDEO’s thermal analysis systems, further simplifying workflows.

Simulate the complete range of heat transfer phenomena, from convection to radiation, storage to dissipation, and steady-state to dynamic and transient environmental influences. TAITherm thermal analysis software is as easy to use as it is powerful. It solves for solar and thermal radiation, convection, and conduction, including ever-changing environments. TAITherm removes the burden of complicated thermal simulations and ensures that your design will function optimally in real-world scenarios. TAITherm is used by thousands of engineers and teams around the globe. Our customers use TAITherm for an array of applications including the latest advancements in automotive, electronics, wearables, military technology, architecture, and more. Our customers are pushing the boundaries of new technology by increasing usability, safety, and effectiveness in their industries through thermal simulations and thermal analysis.

Thermal Desktop includes all aspects of model creation. Built-in finite difference, finite element, and lumped capacitance objects can be combined in any configuration. Thermal-specific objects such as contact conductance, insulation, heat loads, and heaters can be added to model anything from automotive components to manned spacecraft. Thermal Desktop provides full parameterization using variables and arbitrarily complex expressions as input rather than hardwired numbers. These variables, called symbols, allow models to be rapidly manipulated with a few keystrokes, meaning updating or maintaining the model is easy, as is performing sensitivity studies and investigating what-if scenarios. This also provides access to SINDA/FLUINT’s optimization and reliability modules and automatic model correlation.