Automatic Mixed Precision examples¶
Ordinarily, “automatic mixed precision training” means training with
torch.autocast
and torch.amp.GradScaler
together.
Instances of torch.autocast
enable autocasting for chosen regions.
Autocasting automatically chooses the precision for GPU operations to improve performance
while maintaining accuracy.
Instances of torch.amp.GradScaler
help perform the steps of
gradient scaling conveniently. Gradient scaling improves convergence for networks with float16
(by default on CUDA and XPU)
gradients by minimizing gradient underflow, as explained here.
torch.autocast
and torch.amp.GradScaler
are modular.
In the samples below, each is used as its individual documentation suggests.
(Samples here are illustrative. See the Automatic Mixed Precision recipe for a runnable walkthrough.)
Typical Mixed Precision Training¶
# Creates model and optimizer in default precision
model = Net().cuda()
optimizer = optim.SGD(model.parameters(), ...)
# Creates a GradScaler once at the beginning of training.
scaler = GradScaler()
for epoch in epochs:
for input, target in data:
optimizer.zero_grad()
# Runs the forward pass with autocasting.
with autocast(device_type='cuda', dtype=torch.float16):
output = model(input)
loss = loss_fn(output, target)
# Scales loss. Calls backward() on scaled loss to create scaled gradients.
# Backward passes under autocast are not recommended.
# Backward ops run in the same dtype autocast chose for corresponding forward ops.
scaler.scale(loss).backward()
# scaler.step() first unscales the gradients of the optimizer's assigned params.
# If these gradients do not contain infs or NaNs, optimizer.step() is then called,
# otherwise, optimizer.step() is skipped.
scaler.step(optimizer)
# Updates the scale for next iteration.
scaler.update()
Working with Unscaled Gradients¶
All gradients produced by scaler.scale(loss).backward()
are scaled. If you wish to modify or inspect
the parameters’ .grad
attributes between backward()
and scaler.step(optimizer)
, you should
unscale them first. For example, gradient clipping manipulates a set of gradients such that their global norm
(see torch.nn.utils.clip_grad_norm_()
) or maximum magnitude (see torch.nn.utils.clip_grad_value_()
)
is some user-imposed threshold. If you attempted to clip without unscaling, the gradients’ norm/maximum
magnitude would also be scaled, so your requested threshold (which was meant to be the threshold for unscaled
gradients) would be invalid.
scaler.unscale_(optimizer)
unscales gradients held by optimizer
’s assigned parameters.
If your model or models contain other parameters that were assigned to another optimizer
(say optimizer2
), you may call scaler.unscale_(optimizer2)
separately to unscale those
parameters’ gradients as well.
Gradient clipping¶
Calling scaler.unscale_(optimizer)
before clipping enables you to clip unscaled gradients as usual:
scaler = GradScaler()
for epoch in epochs:
for input, target in data:
optimizer.zero_grad()
with autocast(device_type='cuda', dtype=torch.float16):
output = model(input)
loss = loss_fn(output, target)
scaler.scale(loss).backward()
# Unscales the gradients of optimizer's assigned params in-place
scaler.unscale_(optimizer)
# Since the gradients of optimizer's assigned params are unscaled, clips as usual:
torch.nn.utils.clip_grad_norm_(model.parameters(), max_norm)
# optimizer's gradients are already unscaled, so scaler.step does not unscale them,
# although it still skips optimizer.step() if the gradients contain infs or NaNs.
scaler.step(optimizer)
# Updates the scale for next iteration.
scaler.update()
scaler
records that scaler.unscale_(optimizer)
was already called for this optimizer
this iteration, so scaler.step(optimizer)
knows not to redundantly unscale gradients before
(internally) calling optimizer.step()
.
Warning
unscale_
should only be called once per optimizer per step
call,
and only after all gradients for that optimizer’s assigned parameters have been accumulated.
Calling unscale_
twice for a given optimizer between each step
triggers a RuntimeError.
Working with Scaled Gradients¶
Gradient accumulation¶
Gradient accumulation adds gradients over an effective batch of size batch_per_iter * iters_to_accumulate
(* num_procs
if distributed). The scale should be calibrated for the effective batch, which means inf/NaN checking,
step skipping if inf/NaN grads are found, and scale updates should occur at effective-batch granularity.
Also, grads should remain scaled, and the scale factor should remain constant, while grads for a given effective
batch are accumulated. If grads are unscaled (or the scale factor changes) before accumulation is complete,
the next backward pass will add scaled grads to unscaled grads (or grads scaled by a different factor)
after which it’s impossible to recover the accumulated unscaled grads step
must apply.
Therefore, if you want to unscale_
grads (e.g., to allow clipping unscaled grads),
call unscale_
just before step
, after all (scaled) grads for the upcoming
step
have been accumulated. Also, only call update
at the end of iterations
where you called step
for a full effective batch:
scaler = GradScaler()
for epoch in epochs:
for i, (input, target) in enumerate(data):
with autocast(device_type='cuda', dtype=torch.float16):
output = model(input)
loss = loss_fn(output, target)
loss = loss / iters_to_accumulate
# Accumulates scaled gradients.
scaler.scale(loss).backward()
if (i 1) % iters_to_accumulate == 0:
# may unscale_ here if desired (e.g., to allow clipping unscaled gradients)
scaler.step(optimizer)
scaler.update()
optimizer.zero_grad()
Gradient penalty¶
A gradient penalty implementation commonly creates gradients using
torch.autograd.grad()
, combines them to create the penalty value,
and adds the penalty value to the loss.
Here’s an ordinary example of an L2 penalty without gradient scaling or autocasting:
for epoch in epochs:
for input, target in data:
optimizer.zero_grad()
output = model(input)
loss = loss_fn(output, target)
# Creates gradients
grad_params = torch.autograd.grad(outputs=loss,
inputs=model.parameters(),
create_graph=True)
# Computes the penalty term and adds it to the loss
grad_norm = 0
for grad in grad_params:
grad_norm = grad.pow(2).sum()
grad_norm = grad_norm.sqrt()
loss = loss grad_norm
loss.backward()
# clip gradients here, if desired
optimizer.step()
To implement a gradient penalty with gradient scaling, the outputs
Tensor(s)
passed to torch.autograd.grad()
should be scaled. The resulting gradients
will therefore be scaled, and should be unscaled before being combined to create the
penalty value.
Also, the penalty term computation is part of the forward pass, and therefore should be
inside an autocast
context.
Here’s how that looks for the same L2 penalty:
scaler = GradScaler()
for epoch in epochs:
for input, target in data:
optimizer.zero_grad()
with autocast(device_type='cuda', dtype=torch.float16):
output = model(input)
loss = loss_fn(output, target)
# Scales the loss for autograd.grad's backward pass, producing scaled_grad_params
scaled_grad_params = torch.autograd.grad(outputs=scaler.scale(loss),
inputs=model.parameters(),
create_graph=True)
# Creates unscaled grad_params before computing the penalty. scaled_grad_params are
# not owned by any optimizer, so ordinary division is used instead of scaler.unscale_:
inv_scale = 1./scaler.get_scale()
grad_params = [p * inv_scale for p in scaled_grad_params]
# Computes the penalty term and adds it to the loss
with autocast(device_type='cuda', dtype=torch.float16):
grad_norm = 0
for grad in grad_params:
grad_norm = grad.pow(2).sum()
grad_norm = grad_norm.sqrt()
loss = loss grad_norm
# Applies scaling to the backward call as usual.
# Accumulates leaf gradients that are correctly scaled.
scaler.scale(loss).backward()
# may unscale_ here if desired (e.g., to allow clipping unscaled gradients)
# step() and update() proceed as usual.
scaler.step(optimizer)
scaler.update()
Working with Multiple Models, Losses, and Optimizers¶
If your network has multiple losses, you must call scaler.scale
on each of them individually.
If your network has multiple optimizers, you may call scaler.unscale_
on any of them individually,
and you must call scaler.step
on each of them individually.
However, scaler.update
should only be called once,
after all optimizers used this iteration have been stepped:
scaler = torch.amp.GradScaler()
for epoch in epochs:
for input, target in data:
optimizer0.zero_grad()
optimizer1.zero_grad()
with autocast(device_type='cuda', dtype=torch.float16):
output0 = model0(input)
output1 = model1(input)
loss0 = loss_fn(2 * output0 3 * output1, target)
loss1 = loss_fn(3 * output0 - 5 * output1, target)
# (retain_graph here is unrelated to amp, it's present because in this
# example, both backward() calls share some sections of graph.)
scaler.scale(loss0).backward(retain_graph=True)
scaler.scale(loss1).backward()
# You can choose which optimizers receive explicit unscaling, if you
# want to inspect or modify the gradients of the params they own.
scaler.unscale_(optimizer0)
scaler.step(optimizer0)
scaler.step(optimizer1)
scaler.update()
Each optimizer checks its gradients for infs/NaNs and makes an independent decision whether or not to skip the step. This may result in one optimizer skipping the step while the other one does not. Since step skipping occurs rarely (every several hundred iterations) this should not impede convergence. If you observe poor convergence after adding gradient scaling to a multiple-optimizer model, please report a bug.
Working with Multiple GPUs¶
The issues described here only affect autocast
. GradScaler
‘s usage is unchanged.
DataParallel in a single process¶
Even if torch.nn.DataParallel
spawns threads to run the forward pass on each device.
The autocast state is propagated in each one and the following will work:
model = MyModel()
dp_model = nn.DataParallel(model)
# Sets autocast in the main thread
with autocast(device_type='cuda', dtype=torch.float16):
# dp_model's internal threads will autocast.
output = dp_model(input)
# loss_fn also autocast
loss = loss_fn(output)
DistributedDataParallel, one GPU per process¶
torch.nn.parallel.DistributedDataParallel
’s documentation recommends one GPU per process for best
performance. In this case, DistributedDataParallel
does not spawn threads internally,
so usages of autocast
and GradScaler
are not affected.
DistributedDataParallel, multiple GPUs per process¶
Here torch.nn.parallel.DistributedDataParallel
may spawn a side thread to run the forward pass on each
device, like torch.nn.DataParallel
. The fix is the same:
apply autocast as part of your model’s forward
method to ensure it’s enabled in side threads.
Autocast and Custom Autograd Functions¶
If your network uses custom autograd functions
(subclasses of torch.autograd.Function
), changes are required for
autocast compatibility if any function
takes multiple floating-point Tensor inputs,
wraps any autocastable op (see the Autocast Op Reference), or
requires a particular
dtype
(for example, if it wraps CUDA extensions that were only compiled fordtype
).
In all cases, if you’re importing the function and can’t alter its definition, a safe fallback
is to disable autocast and force execution in float32
( or dtype
) at any points of use where errors occur:
with autocast(device_type='cuda', dtype=torch.float16):
...
with autocast(device_type='cuda', dtype=torch.float16, enabled=False):
output = imported_function(input1.float(), input2.float())
If you’re the function’s author (or can alter its definition) a better solution is to use the
torch.amp.custom_fwd()
and torch.amp.custom_bwd()
decorators as shown in
the relevant case below.
Functions with multiple inputs or autocastable ops¶
Apply custom_fwd
and custom_bwd
(with no arguments) to forward
and
backward
respectively. These ensure forward
executes with the current autocast state and backward
executes with the same autocast state as forward
(which can prevent type mismatch errors):
class MyMM(torch.autograd.Function):
@staticmethod
@custom_fwd
def forward(ctx, a, b):
ctx.save_for_backward(a, b)
return a.mm(b)
@staticmethod
@custom_bwd
def backward(ctx, grad):
a, b = ctx.saved_tensors
return grad.mm(b.t()), a.t().mm(grad)
Now MyMM
can be invoked anywhere, without disabling autocast or manually casting inputs:
mymm = MyMM.apply
with autocast(device_type='cuda', dtype=torch.float16):
output = mymm(input1, input2)
Functions that need a particular dtype
¶
Consider a custom function that requires torch.float32
inputs.
Apply custom_fwd(device_type='cuda', cast_inputs=torch.float32)
to forward
and custom_bwd(device_type='cuda')
to backward
.
If forward
runs in an autocast-enabled region, the decorators cast floating-point Tensor
inputs to float32
on designated device assigned by the argument device_type,
CUDA in this example, and locally disable autocast during forward
and backward
:
class MyFloat32Func(torch.autograd.Function):
@staticmethod
@custom_fwd(device_type='cuda', cast_inputs=torch.float32)
def forward(ctx, input):
ctx.save_for_backward(input)
...
return fwd_output
@staticmethod
@custom_bwd(device_type='cuda')
def backward(ctx, grad):
...
Now MyFloat32Func
can be invoked anywhere, without manually disabling autocast or casting inputs:
func = MyFloat32Func.apply
with autocast(device_type='cuda', dtype=torch.float16):
# func will run in float32, regardless of the surrounding autocast state
output = func(input)