Paket: ponyprog (3.1.3 ds-2)

ponyprog için bağlantılar

Debian Kaynakları:

ponyprog Kaynak Paketini İndir:

Geliştiriciler:

Dış Kaynaklar:

Ana Sayfa [github.com]

Benzer paketler:

Serial device programmer

PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux. It's purpose is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.

PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.

You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program on the chip using PonyProg. PonyProg enables the user to write, verify and erase data on the microchip.

Also setting fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep file, BIN file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers serial or parallel port programming for uC's. You can even change polarity of control lines without touching the wires using I/O port setup.

Using PonyProg together with generic USB2serial based on FTDI adapters will work. There are plans on upstream to use libusb to add more USB2serial based functionality.

Etiketler: Alan: Computer Science, Geliştirildiği dil: C , Kullanıcı Arayüzü: interface::graphical, interface::x11, Rol: Program, Arayüz Araç Takımı: Qt, X Pencere Sistemi: Uygulama

ponyprog ile İlgili Diğer Paketler

bağımlılıklar

tavsiye edilen

önerilen

enhances

dep: libc6 (>= 2.38)

GNU C Library: Shared libraries
ayrıca şunun tarafından sağlanan bir sanal paket libc6-udeb
dep: libftdi1-2 (>= 1.2)

C Library to control and program the FTDI USB controllers
dep: libftdipp1-3 (>= 1.5)

C Library to control and program the FTDI USB controllers
dep: libgcc-s1 (>= 3.5)

GCC support library
dep: libqt5core5t64 (>= 5.15.1)

Qt 5 core module
dep: libqt5gui5t64 (>= 5.11.0~rc1)

Qt 5 GUI module

ya da libqt5gui5-gles (>= 5.11.0~rc1)

Qt 5 GUI module — OpenGL ES variant
dep: libqt5multimedia5 (>= 5.6.0~beta)

Qt 5 Multimedia module
dep: libqt5printsupport5t64 (>= 5.2.0)

Qt 5 print support module
dep: libqt5widgets5t64 (>= 5.0.2)

Qt 5 widgets module
dep: libstdc 6 (>= 5.2)

GNU Standard C Library v3
dep: libusb-1.0-0 (>= 2:1.0.16)

userspace USB programming library

ponyprog indir

Tüm mevcut mimariler için indir
Mimari	Paket Boyutu	Kurulu Boyut	Dosyalar
armhf	674,0 kB	2.103,0 kB	[dosya listesi]