Movacolor

𝗟𝗲𝗮𝗿𝗻 𝘄𝗵𝗮𝘁 𝘄𝗲 𝗱𝗼 𝗮𝘁 𝗠𝗼𝘃𝗮𝗰𝗼𝗹𝗼𝗿 At Movacolor, we aim to help customers with accurate dosing and blending, by having a wide range of products that provide solutions to their specific needs. In doing so, we actively support our customers in reaching their sustainability goals. Our dosing technology is based on almost 30 years of experience and partnerships with plastics professionals all over the world. That's why we understand the most common problems in injection molding, blow molding, and extrusion. At our HQ in the Netherlands, we engineer, assemble, and test our products before sending them all over the world through our distributor network. We are working with over 70 distributors and agents all over the world. Most of these are located in the Asia-Pacific, Americas, Europe, Middle East, and Africa, establishing our presence as an international company.    Learn more about what we can do for your business by following this link ➡ https://bit.ly/3WZOcQL #Injectionmolding #Plastics #Innovation #Blowmolding #Extrusion

🚗 Enhance Your Automotive Manufacturing with our MHBS Hybrid Blender The automotive industry uses many materials to produce parts that demand high standards. Because of this complex process, they combine expensive additives, like fire retardant, and the main component or masterbatch. Our MHBS Hybrid Blender is the perfect solution for the automotive industry. It combines batch blending with inline gravimetric dosing using the MDS Balance. Embracing sustainability is crucial in today's market. The need for closed-loop recycling solutions is growing as the automotive industry shifts towards using more recycled materials. Our MCS Regrind fits seamlessly in your production process; reusing rejects or other forms of regrind into the production process. Using an MCS Regrind helps reduce the environmental footprint and aligns with the growing demand for eco-friendly manufacturing practices. By leveraging advanced blending technology and supporting sustainable material use, we help manufacturers stay competitive and environmentally responsible. 🔗 Learn more about how the MHBS Hybrid Blender can improve your automotive production: https://bit.ly/3Tw9iFJ 🔗Click on this link to learn more about the MCS Regrind: https://bit.ly/4elcQmq #Automotiveindustry #Sustainability #injectionmoldign #Blowmolding

𝗜𝗻𝘁𝗿𝗼𝗱𝘂𝗰𝗶𝗻𝗴 𝘁𝗵𝗲 𝗔𝘀𝘀𝗲𝗺𝗯𝗹𝘆 𝗗𝗲𝗽𝗮𝗿𝘁𝗺𝗲𝗻𝘁 Today, we are showing you around Movacolor's Assembly department. To give you an insight, one of our dedicated employees, Frank, will share his experiences and the department's responsibilities. He plays a crucial role in ensuring the smooth operation of the assembly process. "My job in the assembly department is to ensure that all orders are complete and ready in time for delivery. When preparing the orders, I work according to the order information, and if I notice any mistakes, I communicate them to the concerned departments." Another essential task of Frank is observing the department's different operations and noting where improvement or change is needed. When he notices any weak points, he communicates them to those responsible for innovations in the company. Frank is also responsible for reviewing the tasks of other assembly department employees. He ensures that others are satisfied with their roles and that the environment is good overall. "Something I like about my job is that we work as a team toward a common goal. Being accurate is a priority for all of us - whether it is order handling, packaging or other departments – which keeps work running smoothly at Movacolor." Communication is the cornerstone of our work in the assembly department. We believe in listening to everyone's ideas, which fosters an environment where each employee can contribute uniquely while being part of a cohesive team. #movacolor #greatplacetowork #plasticsindustry

Our distributor, Labotek Deutschland GmbH, is exhibiting at Fakuma Messe 2024! 𝗪𝗵𝘆 𝘀𝗵𝗼𝘂𝗹𝗱 𝘆𝗼𝘂 𝘃𝗶𝘀𝗶𝘁 𝗟𝗮𝗯𝗼𝘁𝗲𝗸 𝗮𝘁 𝗙𝗮𝗸𝘂𝗺𝗮 𝟮𝟬𝟮𝟰? They are set to showcase their latest innovations to improve efficiency in drying, conveying, and dosing plastics. Their solutions are designed to optimize your plastics processing operations, resulting in enhanced productivity, energy savings, and cost savings. Don’t miss the opportunity to visit Fakuma this year, claim your free ticket to the exhibition by clicking this Link ➡️ https://bit.ly/3X7wScX

Is accessing high-placed dosing equipment compromising your team's safety and slowing down production? ⚠ Climbing ladders to reach dosing units not only poses safety risks but also leads to operational inefficiencies and downtime. Imagine bringing the dosing equipment right to floor level, enhancing safety and streamlining your workflow while ensuring high dosing precision. Our MDS Balance is the benchmark in accurate additive and colourant dosing and plays an integral role in our MCS Off-line Dosing System. The MDS Balance's unmatched accuracy makes it the cornerstone of the MCS Off-line Dosing System. It delivers precise dosing and high-quality end products without the need for hazardous climbs. This innovative combination ensures seamless material changes and optimizes performance for plastics production processes. Ready to bring your production safety and efficiency to a higher level? Visit us at the Fakuma Messe from October 15-19 to discover how the MDS Balance and MCS Off-line Dosing System can transform your operations. Claim your free tickets here: https://bit.ly/3XE5Qd5

🚨 𝐄𝐧𝐝 𝐨𝐟 𝐚𝐧 𝐄𝐫𝐚: 𝐌𝐂𝐓𝐂 𝐑𝐞𝐭𝐢𝐫𝐞𝐬, 𝐰𝐞𝐥𝐜𝐨𝐦𝐞 𝐭𝐨 𝐭𝐡𝐞 𝐏𝐓𝐂! After decades of reliable service, it's time for the MCTC to enjoy its well-deserved retirement. We're excited to introduce its successor: the Portable Touchscreen Controller (PTC) Starting October 15th, the PTC will be available with all Movacolor gravimetric and optometric solutions. Don't miss the chance to experience it live at Fakuma Messe 2024! 📅 Will we see you there? 𝐏𝐓𝐂 𝐇𝐢𝐠𝐡𝐥𝐢𝐠𝐡𝐭𝐬: - Sleek 8-inch full-color touchscreen with ergonomic design - Portable up to 15 meters via a single CAN-bus cable - Storage for up to 1,000 recipes for efficient workflows - Control up to 15 gravimetric solutions from a single device - Adaptable mounting options for ultimate flexibility Click below to visit our FAKUMA page and 𝐜𝐥𝐚𝐢𝐦 𝐲𝐨𝐮𝐫 𝐟𝐫𝐞𝐞 𝐭𝐢𝐜𝐤𝐞𝐭 today. 🔗 - https://bit.ly/3MT3i5U

𝗟𝘂𝗻𝗰𝗵 𝗯𝗿𝗲𝗮𝗸𝘀 𝗮𝘁 𝗠𝗼𝘃𝗮𝗰𝗼𝗹𝗼𝗿   Lunchtime comes around noon when everyone is ready to take a break from hard work at Movacolor. We usually start by gathering at the big table and sharing our lunch while catching up with each other—whether it is a work-related topic or weekend plans, we always have fun conversations.   No matter how hard or how busy we work, we always make time after our meal to recharge in the game area and engage in team-building activities with our co-workers—a short ping-pong competition, darts, or a quick table football match.   These games clear our minds, help maintain focus, and ensure we stay connected to each other. They also give us energy and a bit of competitiveness.   Our competitive spirit doesn't stop at our free-time activities. It's also a key element of our work. We constantly strive to provide the most innovative solutions for our products, maintain the highest quality, and meet special needs. We're always ready to tackle the issues in our field. Get to know more about our innovative solutions by clicking on the link below! ⬇ 🔗 bit.ly/4exHpov #teambuilding #movacolor #teamwork #lunchbreak

🌍 Fakuma Messe 𝗶𝘀 𝗹𝗲𝘀𝘀 𝘁𝗵𝗮𝗻 𝟰 𝘄𝗲𝗲𝗸𝘀 𝗮𝘄𝗮𝘆!  Join us next month at the international trade fair for plastics processing and discover: 🔹 𝗠𝗗𝗦 𝗕𝗮𝗹𝗮𝗻𝗰𝗲 – The cornerstone of precise dosing in the plastic industry. 🔹 𝗠𝗖𝗦 𝗥𝗲𝗴𝗿𝗶𝗻𝗱 – Revolutionizing closed-loop recycling and gravimetric dosing, making your processes more sustainable. 🔹 𝗠𝗖𝗦 𝗢𝗳𝗳-𝗹𝗶𝗻𝗲 𝗱𝗼𝘀𝗶𝗻𝗴  – No more hazardous situations, access the dosing equipment on the production floor.   🔹 𝗠𝗛𝗕𝗦 𝗛𝘆𝗯𝗿𝗶𝗱 𝗕𝗹𝗲𝗻𝗱𝗲𝗿 – Our patented solution combining gravimetric dosing and batch blending, all in one powerful unit. 🔹 𝗠𝗗𝗦 𝗩𝗼𝗹𝘂𝗺𝗲𝘁𝗿𝗶𝗰 𝗙𝗲𝗲𝗱𝗲𝗿 – Our high-performance volumetric dosing unit designed for consistency and reliability. 📅 Fakuma 2024 📍 Location: Friedrichshafen, Germany 🔗 Click this Link to schedule a meeting with our Sales manager in the DACH area! https://bit.ly/4epMpvz 🔗 Click this Link and claim your free ticket to the exhibition! https://bit.ly/3X7wScX #Fakuma2024 #PlasticProcessing #Sustainability #GravimetricDosing #VolumetricDosing #InnovationInPlastics

🔥 𝗦𝗮𝗳𝗲𝘁𝘆 𝗶𝘀 𝗽𝗮𝗿𝗮𝗺𝗼𝘂𝗻𝘁 𝗶𝗻 𝗵𝗶𝗴𝗵-𝗿𝗶𝘀𝗸 𝘀𝗲𝘁𝘁𝗶𝗻𝗴𝘀 𝗹𝗶𝗸𝗲 𝗘𝗩 𝗯𝗮𝘁𝘁𝗲𝗿𝘆 𝗲𝗻𝗰𝗹𝗼𝘀𝘂𝗿𝗲𝘀. Don't let our name fool you! We're doing more than just colour solutions. For example, with the electric vehicle industry growing at 17.8% yearly, the demand for machinery that efficiently processes flame-retardant, UV stabilizing, and anti-static additives is rising. Meet our MHBS Hybrid Blender—a new way to process additives with high throughput against optimal cost efficiency. This solution combines gravimetric blending and inline feeding to achieve up to a 3x improvement in shot-to-shot accuracy compared to standard blenders. Our MHBS Hybrid Blender is a game-changer in the manufacturing process. It allows for higher throughput with cheaper additives through blending while ensuring the highest level of accuracy for more expensive additives with the help of gravimetric dosing units. You can get a hands-on experience with the MHBS Hybrid Blender during FAKUMA 2024! Schedule a meeting with our sales manager by clicking this link ➡ https://bit.ly/4epMpvz Learn more about our Hybrid Blender range by following this link ➡ https://bit.ly/3Tw9iFJ #gravimetricdosing #blending #EVmanufacturing #innovation

𝗘𝗣𝗔'𝘀 𝗻𝗲𝘄 𝗿𝗲𝗰𝘆𝗰𝗹𝗶𝗻𝗴 𝗴𝘂𝗶𝗱𝗲𝗹𝗶𝗻𝗲𝘀 According to a new policy released by the Environmental Protection Agency (EPA), companies can no longer advertise products with exaggerated claims about recycled material content. Until now, businesses misled consumers with an accounting method called "mass balance" to make their products appear more sustainable. Many times, labels showed 20-30% of recycled material in products, when in reality the actual amount was less than 1%. EPA's new policy only allows the government's stamp of approval, if this new method is implemented. Movacolor's values align with EPA regulations by providing a sustainable solution to increase material reuse. The MCS Regrind operates in a closed-loop recycling system, recycling the rejected plastic material back into the process. For companies looking to increase the amount of recycled material in their products, the MCS Regrind is the perfect choice! Click on the link to read more about EPA's new sustainable policies, and get to know more about Movacolor's MCS Regrind technology!⬇ EPA's policies 🔗 bit.ly/3Zqgffj MCS Regrind 🔗 bit.ly/3ATLnJG #sustainability #innovation #recycling #movacolor