OpenBSD manual page server

Manual Page Search Parameters

IPS(4) Device Drivers Manual IPS(4)

ipsIBM SATA/SCSI ServeRAID controller

ips* at pci?

The ips driver provides support for IBM ServeRAID controllers, including:

Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers. All RAID configuration is done through the bootable IBM ServeRAID Support CD; a CD image is freely available at the IBM website.

RAID management is done through the bio(4) device with the bioctl(8) command. Logical disk status is exposed under the hw.sensors sysctl(8) and can be monitored using sensorsd(8).

bio(4), intro(4), pci(4), scsi(4), sd(4), bioctl(8), sensorsd(8), sysctl(8)

https://www.ibm.com

The ips driver first appeared in OpenBSD 4.1.

The ips driver was written by Alexander Yurchenko <[email protected]>.

Due to bioctl(8) limitations the ips driver associates all unused and hot spare drives with the first volume but the drives can be used for rebuilding any degraded volume.

February 19, 2022 OpenBSD-current