-
amdgpu_top
displays AMDGPU usage. The tool displays information gathered from performance counters (GRBM, GRBM2), sensors, fdinfo, gpu_metrics and AMDGPU driver
-
lsm303agr
Platform-agnostic Rust driver for the LSM303AGR ultra-compact high-performance eCompass module: ultra-low-power 3D accelerometer and 3D magnetometer
-
libmedium
interface with lm_sensors
-
realsense-rust
High-level RealSense library in Rust
-
twinleaf-tools
Tools for the Twinleaf I/O protocol for reading data from Twinleaf quantum sensors
-
hw
强大而统一的跨平台硬件监控工具
-
opt300x
Platform-agnostic Rust driver for the OPT300x ambient light sensors. Compatible with OPT3001, OPT3002, OPT3004, OPT3006 and OPT3007
-
sensirion-i2c
Common functionality for I2C based sensors from Sensirion
-
lm-sensors
Hardware monitoring in Linux
-
bluer-miflora-cli
CLI to communicate with the miflora devices with bluer
-
tcn75a
Embedded HAL driver for accessing TCN75A temperature sensors
-
realsense-sys
Rust abstraction layer for the RealSense SDK C library
-
embedded-devices
Device driver implementations for many embedded sensors and devices
-
embedded-aht20
Platform-agnostic Rust driver for the AHT20 temperature & humidity sensor
-
scd4x-rs
query SCD4x sensors over I²C
-
phidget
Phidget library for Rust
-
bme280-rs
query BME280 sensors over I²C
-
sht31
temperature and humidity sensor
-
tmp006
Platform-agnostic Rust driver for the TMP006/TMP006B non-contact infrared (IR) thermopile temperature sensor
-
sensors
A Rust-friendly interface to lm-sensors
-
embedded-registers
Procedural macro for effortless definitions of registers in embedded device drivers
-
tether-lidar2d-consolidation
Tether Lidar2D Consolidator Agent, Rust edition
-
biometrics_pb
protocol buffers corresponding to biometric readings
-
scd30-interface
An I2C driver for the SCD30 sensor in Rust
-
fingerprint-sensor
interfacing with fingerprint sensors
-
hcsr04_async
A no-std driver for the HC-SR04 ultrasonic sensor using async and Embassy
-
sensors-sys
Hardware monitoring in Linux
-
bluer-miflora
communicate with the miflora devices with bluer
-
xsens-mti
An unofficial and incomplete no_std Rust driver for Xsens MTi-series sensors
-
embedded-ccs811
Platform-agnostic Rust driver for the CCS811 ultra-low power digital gas sensor for monitoring indoor air quality
-
veml7700
Platform-agnostic Rust driver for the VEML7700 High Accuracy Ambient Light Sensor
-
icm42670
An embedded-hal driver for the ICM-42670 6-axis IMU
-
sen0177
Read air quality data from the SEN0177 and PMSA003I sensors
-
max44009
Platform-agnostic Rust driver for the MAX44009 ambient light sensor
-
vl53l1x-uld
source port of the ULD driver for the VL53L1X
-
twinleaf
working with the Twinleaf I/O protocol and Twinleaf quantum sensors
-
mh-z19c
Pure rust implementation to read out the Winsen MH-Z19C CO2 sensor
-
wave
A no-std no-alloc gesture recognition library for low resolution TOF-Sensors
-
veml6030
Platform-agnostic Rust driver for the VEML6030 and VEML7700 high-accuracy ambient light sensors
-
dht-sensor
Driver for the DHT11/DHT22 sensor based on embedded-hal
-
desktop2mqtt
A daemon to integrate any pc into your home automation system
-
onewire
using embedded_hal as abstraction layer, based on arduino OneWire library. WIP
-
sensehat
Interface with the Raspberry Pi Foundation's official Sense HAT sensor board
-
l3gd20-registers
A typed map of the STMicroelectronics L3GD20 Gyroscope registers
-
bhi160
driver for the Bosch Sensortec BHI160(B) smart sensors
-
scd30-modbus
SCD30 driver implementation
-
mh-z19
serial protocol for Winsen MH-Z19 / MH-Z19B / MH-Z14 CO2 sensors
-
dht-logger
Read DHT sensor data formatted in JSON over a serial interface and log it
-
ingics
parser for various Ingics iBS Sensors
-
tmag5170
A platform agnostic driver to interface with the TMAG5170-Q1 (3D hall sensor)
-
multi-mission-library-rs
designed to hold composable, reusable driver code / wrappers for various sensors and hardware output devices. Currently it does not support differing STM32 models and only supports the STM32F4…
-
luftpost
Watches luftdaten.info particulates sensors and sends E-Mails if measurements exceed thresholds
-
dht-mmap-rust
access to DHT11 and DHT22 sensors for the Raspberry PI
-
embedded-qmp6988
Platform-agnostic Rust driver for the QMP6988 barometric pressure sensor
-
hal_sensor_dht
A Embedded HAL driver for the DHT humidity and temperature sensors
-
gpmf
WIP gpmf implementation
-
opensensor
streaming and archiving measurements from sensors
-
dht-hal-drv
HAL based driver for digital humidity and temperature sensors DHT11, DHT21, DHT22
-
tsic
Platform-agnostic access to TSIC sensors via embedded-hal
-
ms8607
A platform agnostic driver for the MS8607 Pressure, Temperature, and Humidity Sensor from TE Connectivity
-
ms5611-spi
no_std driver for MS5611 and MS5607 barometer sensors
-
sps30-i2c
Platform-agnostic Rust driver for the SPS30 particulate matter sensor
-
houseflow-device
Device for Houseflow
-
sindit-senml
SenML RFC8428 proposed standard
-
lsm6dsox
Platform-agnostic embedded-hal driver for the ST LSM6DSOX iNEMO inertial module
-
libsensors-sys
Rust bindings to libsensors
-
hlk_ld6002
interfacing with the HLK-LD6002 respiratory and heartbeat radar module
-
iaq-core
Platform-agnostic Rust driver for the iAQ-Core indoor air quality sensor. Compatible with iAQ-Core-C and iAQ-Core-P.
-
sensirion-rht
Driver for several temperature and humidity sensors from Sensirion
-
datagen_network
Data generator network application, server and client
-
pms700x
Embeded-hal implementation for the PMS700x family of sensors
-
leptrino-force-torque-sensor
Device driver for Leptrino force torque sensor written in pure Rust
-
heim-sensors
Cross-platform sensors information
-
htu2xd
Driver for the TE Connectivity Measurement Specialties HTU20D and HTU21D series I2C temperature and humidity sensors
-
dynpick-force-torque-sensor
Device driver for Wacoh-tech force-torque sensor written in pure Rust
-
android_sensor-sys
Bindings to Android Sensor Library
-
mh-zx-driver
MH-Z* family (MH-Z14/Z19/Z19B) CO2 sensor driver built on top of
embedded-hal
primitives -
bevy_2d_box_physics
A 2D box-collision physics engine for use with the bevy engine
-
i2csensors
Traits for I2C sensors
-
gy-21
Driver for the GY-21 temperature and relative humidity sensor
-
conreg
Control and Regulation
-
tsl256x
Platform agnostic driver for TSL256x series light intensity sensors built using the embedded-hal
-
deconz-exporter
A very simple (and naive) Prometheus exporter for deCONZ Phoscon zigbee gateway
-
prometheus_sensors_exporter
Get measurements from some hardware sensors and share them using prometheus protocol to integrate with grafana visualisation graphs
-
water_mon_app
A local webserver-based app to view Water Monitor readings
-
sensorem
A colorful temperature sensor output
-
camm
WIP camm implementation
-
blehr
reading heart rate from BLE heart rate devices
Try searching with DuckDuckGo.