#ifndef LANGUAGE_H

#define LANGUAGE_H

// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES

//

// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"

// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS

// Languages

// 1 English

// 2 Polish

// 3 French

// 4 German

// 5 Spanish

// 6 Russian

// 7 Italian

// 8 Portuguese

// 9 Finnish

// 10 Aragonese

#ifndef LANGUAGE_CHOICE

#define LANGUAGE_CHOICE 1 // Pick your language from the list above

#endif

#define PROTOCOL_VERSION "1.0"

#if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72

#define MACHINE_NAME "Ultimaker"

#define FIRMWARE_URL "http://firmware.ultimaker.com"

#elif MOTHERBOARD == 80

#define MACHINE_NAME "Rumba"

#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"

#elif MOTHERBOARD == 77

#define MACHINE_NAME "3Drag"

#define FIRMWARE_URL "http://3dprint.elettronicain.it/"

#else

#ifdef CUSTOM_MENDEL_NAME

#define MACHINE_NAME CUSTOM_MENDEL_NAME

#else

#define MACHINE_NAME "Mendel"

#endif

// Default firmware set to Mendel

#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"

#endif

#ifndef MACHINE_UUID

#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"

#endif

#define STRINGIFY_(n) #n

#define STRINGIFY(n) STRINGIFY_(n)

// Common LCD messages

/* nothing here as of yet */

// Common serial messages

#define MSG_MARLIN "Marlin"

#if LANGUAGE_CHOICE == 1

// LCD Menu Messages

// Please note these are limited to 17 characters!

#define WELCOME_MSG MACHINE_NAME " ready."

#define MSG_SD_INSERTED "Card inserted"

#define MSG_SD_REMOVED "Card removed"

#define MSG_MAIN "Main"

#define MSG_AUTOSTART "Autostart"

#define MSG_DISABLE_STEPPERS "Disable steppers"

#define MSG_AUTO_HOME "Auto home"

#define MSG_SET_ORIGIN "Set origin"

#define MSG_PREHEAT_PLA "Preheat PLA"

#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"

#define MSG_PREHEAT_ABS "Preheat ABS"

#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"

#define MSG_COOLDOWN "Cooldown"

#define MSG_SWITCH_PS_ON "Switch power on"

#define MSG_SWITCH_PS_OFF "Switch power off"

#define MSG_EXTRUDE "Extrude"

#define MSG_RETRACT "Retract"

#define MSG_MOVE_AXIS "Move axis"

#define MSG_MOVE_X "Move X"

#define MSG_MOVE_Y "Move Y"

#define MSG_MOVE_Z "Move Z"

#define MSG_MOVE_E "Extruder"

#define MSG_MOVE_01MM "Move 0.1mm"

#define MSG_MOVE_1MM "Move 1mm"

#define MSG_MOVE_10MM "Move 10mm"

#define MSG_SPEED "Speed"

#define MSG_NOZZLE "Nozzle"

#define MSG_NOZZLE1 "Nozzle2"

#define MSG_NOZZLE2 "Nozzle3"

#define MSG_BED "Bed"

#define MSG_FAN_SPEED "Fan speed"

#define MSG_FLOW "Flow"

#define MSG_CONTROL "Control"

#define MSG_MIN " \002 Min"

#define MSG_MAX " \002 Max"

#define MSG_FACTOR " \002 Fact"

#define MSG_AUTOTEMP "Autotemp"

#define MSG_ON "On "

#define MSG_OFF "Off"

#define MSG_PID_P "PID-P"

#define MSG_PID_I "PID-I"

#define MSG_PID_D "PID-D"

#define MSG_PID_C "PID-C"

#define MSG_ACC "Accel"

#define MSG_VXY_JERK "Vxy-jerk"

#define MSG_VZ_JERK "Vz-jerk"

#define MSG_VE_JERK "Ve-jerk"

#define MSG_VMAX "Vmax "

#define MSG_X "x"

#define MSG_Y "y"

#define MSG_Z "z"

#define MSG_E "e"

#define MSG_VMIN "Vmin"

#define MSG_VTRAV_MIN "VTrav min"

#define MSG_AMAX "Amax "

#define MSG_A_RETRACT "A-retract"

#define MSG_XSTEPS "Xsteps/mm"

#define MSG_YSTEPS "Ysteps/mm"

#define MSG_ZSTEPS "Zsteps/mm"

#define MSG_ESTEPS "Esteps/mm"

#define MSG_RECTRACT "Rectract"

#define MSG_TEMPERATURE "Temperature"

#define MSG_MOTION "Motion"

#define MSG_CONTRAST "LCD contrast"

#define MSG_STORE_EPROM "Store memory"

#define MSG_LOAD_EPROM "Load memory"

#define MSG_RESTORE_FAILSAFE "Restore failsafe"

#define MSG_REFRESH "Refresh"

#define MSG_WATCH "Info screen"

#define MSG_PREPARE "Prepare"

#define MSG_TUNE "Tune"

#define MSG_PAUSE_PRINT "Pause print"

#define MSG_RESUME_PRINT "Resume print"

#define MSG_STOP_PRINT "Stop print"

#define MSG_CARD_MENU "Print from SD"

#define MSG_NO_CARD "No SD card"

#define MSG_DWELL "Sleep..."

#define MSG_USERWAIT "Wait for user..."

#define MSG_RESUMING "Resuming print"

#define MSG_NO_MOVE "No move."

#define MSG_KILLED "KILLED. "

#define MSG_STOPPED "STOPPED. "

#define MSG_CONTROL_RETRACT "Retract mm"

#define MSG_CONTROL_RETRACTF "Retract F"

#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

#define MSG_CONTROL_RETRACT_RECOVER "UnRet mm"

#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"

#define MSG_AUTORETRACT "AutoRetr."

#define MSG_FILAMENTCHANGE "Change filament"

#define MSG_INIT_SDCARD "Init. SD card"

#define MSG_CNG_SDCARD "Change SD card"

#define MSG_ZPROBE_OUT "Z probe out. bed"

#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

#define MSG_ZPROBE_ZOFFSET "Z Offset"

#define MSG_BABYSTEP_X "Babystep X"

#define MSG_BABYSTEP_Y "Babystep Y"

#define MSG_BABYSTEP_Z "Babystep Z"

#define MSG_ENDSTOP_ABORT "Endstop abort"

// Serial Console Messages

#define MSG_Enqueing "enqueing \""

#define MSG_POWERUP "PowerUp"

#define MSG_EXTERNAL_RESET " External Reset"

#define MSG_BROWNOUT_RESET " Brown out Reset"

#define MSG_WATCHDOG_RESET " Watchdog Reset"

#define MSG_SOFTWARE_RESET " Software Reset"

#define MSG_AUTHOR " | Author: "

#define MSG_CONFIGURATION_VER " Last Updated: "

#define MSG_FREE_MEMORY " Free Memory: "

#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "

#define MSG_OK "ok"

#define MSG_FILE_SAVED "Done saving file."

#define MSG_ERR_LINE_NO "Line Number is not Last Line Number 1, Last Line: "

#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "

#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "

#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "

#define MSG_FILE_PRINTED "Done printing file"

#define MSG_BEGIN_FILE_LIST "Begin file list"

#define MSG_END_FILE_LIST "End file list"

#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "

#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "

#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "

#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "

#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"

#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "

#define MSG_HEATING "Heating..."

#define MSG_HEATING_COMPLETE "Heating done."

#define MSG_BED_HEATING "Bed Heating."

#define MSG_BED_DONE "Bed done."

#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

#define MSG_COUNT_X " Count X: "

#define MSG_ERR_KILLED "Printer halted. kill() called!"

#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"

#define MSG_RESEND "Resend: "

#define MSG_UNKNOWN_COMMAND "Unknown command: \""

#define MSG_ACTIVE_EXTRUDER "Active Extruder: "

#define MSG_INVALID_EXTRUDER "Invalid extruder"

#define MSG_X_MIN "x_min: "

#define MSG_X_MAX "x_max: "

#define MSG_Y_MIN "y_min: "

#define MSG_Y_MAX "y_max: "

#define MSG_Z_MIN "z_min: "

#define MSG_Z_MAX "z_max: "

#define MSG_M119_REPORT "Reporting endstop status"

#define MSG_ENDSTOP_HIT "TRIGGERED"

#define MSG_ENDSTOP_OPEN "open"

#define MSG_HOTEND_OFFSET "Hotend offsets:"

#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"

#define MSG_SD_INIT_FAIL "SD init fail"

#define MSG_SD_VOL_INIT_FAIL "volume.init failed"

#define MSG_SD_OPENROOT_FAIL "openRoot failed"

#define MSG_SD_CARD_OK "SD card ok"

#define MSG_SD_WORKDIR_FAIL "workDir open failed"

#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "

#define MSG_SD_FILE_OPENED "File opened: "

#define MSG_SD_SIZE " Size: "

#define MSG_SD_FILE_SELECTED "File selected"

#define MSG_SD_WRITE_TO_FILE "Writing to file: "

#define MSG_SD_PRINTING_BYTE "SD printing byte "

#define MSG_SD_NOT_PRINTING "Not SD printing"

#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"

#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "

#define MSG_STEPPER_TOO_HIGH "Steprate too high: "

#define MSG_ENDSTOPS_HIT "endstops hit: "

#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"

#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"

#define MSG_BABYSTEPPING_X "Babystepping X"

#define MSG_BABYSTEPPING_Y "Babystepping Y"

#define MSG_BABYSTEPPING_Z "Babystepping Z"

#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"

#endif

#if LANGUAGE_CHOICE == 2

// LCD Menu Messages

// Please note these are limited to 17 characters!

#define WELCOME_MSG MACHINE_NAME " gotowy."

#define MSG_SD_INSERTED "Karta wlozona"

#define MSG_SD_REMOVED "Karta usunieta"

#define MSG_MAIN "Menu glowne"

#define MSG_AUTOSTART "Autostart"

#define MSG_DISABLE_STEPPERS "Wylacz silniki"

#define MSG_AUTO_HOME "Auto. poz. zerowa"

#define MSG_SET_ORIGIN "Ustaw punkt zero"

#define MSG_PREHEAT_PLA "Rozgrzej PLA"

#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"

#define MSG_PREHEAT_ABS "Rozgrzej ABS"

#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"

#define MSG_COOLDOWN "Chlodzenie"

#define MSG_SWITCH_PS_ON "Wlacz zasilacz"

#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"

#define MSG_EXTRUDE "Ekstruzja"

#define MSG_RETRACT "Cofanie"

#define MSG_MOVE_AXIS "Ruch osi"

#define MSG_MOVE_X "Przesun w X"

#define MSG_MOVE_Y "Przesun w Y"

#define MSG_MOVE_Z "Przesun w Z"

#define MSG_MOVE_E "Ekstruzja (os E)"

#define MSG_MOVE_01MM "Przesuwaj co .1mm"

#define MSG_MOVE_1MM "Przesuwaj co 1mm"

#define MSG_MOVE_10MM "Przesuwaj co 10mm"

#define MSG_SPEED "Predkosc"

#define MSG_NOZZLE "Dysza"

#define MSG_NOZZLE1 "Dysza 2"

#define MSG_NOZZLE2 "Dysza 3"

#define MSG_BED "Loze"

#define MSG_FAN_SPEED "Obroty wiatraka"

#define MSG_FLOW "Przeplyw"

#define MSG_CONTROL "Kontrola"

#define MSG_MIN " \002 Min"

#define MSG_MAX " \002 Max"

#define MSG_FACTOR " \002 Mnoznik"

#define MSG_AUTOTEMP "Auto. temperatura"

#define MSG_ON "Wl. "

#define MSG_OFF "Wyl."

#define MSG_PID_P "PID-P"

#define MSG_PID_I "PID-I"

#define MSG_PID_D "PID-D"

#define MSG_PID_C "PID-C"

#define MSG_ACC "Przyspieszenie"

#define MSG_VXY_JERK "Zryw Vxy"

#define MSG_VZ_JERK "Zryw Vz"

#define MSG_VE_JERK "Zryw Ve"

#define MSG_VMAX "Vmax"

#define MSG_X "x"

#define MSG_Y "y"

#define MSG_Z "z"

#define MSG_E "e"

#define MSG_VMIN "Vmin"

#define MSG_VTRAV_MIN "Vskok min"

#define MSG_AMAX "Amax"

#define MSG_A_RETRACT "A-wycofanie"

#define MSG_XSTEPS "krokiX/mm"

#define MSG_YSTEPS "krokiY/mm"

#define MSG_ZSTEPS "krokiZ/mm"

#define MSG_ESTEPS "krokiE/mm"

#define MSG_RECTRACT "Wycofanie"

#define MSG_TEMPERATURE "Temperatura"

#define MSG_MOTION "Ruch"

#define MSG_CONTRAST "Kontrast LCD"

#define MSG_STORE_EPROM "Zapisz w pamieci"

#define MSG_LOAD_EPROM "Wczytaj z pamieci"

#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"

#define MSG_REFRESH "\004Odswiez"

#define MSG_WATCH "Ekran glowny"

#define MSG_PREPARE "Przygotuj"

#define MSG_CONTROL "Ustawienia"

#define MSG_TUNE "Strojenie"

#define MSG_PAUSE_PRINT "Pauza"

#define MSG_RESUME_PRINT "Wznowienie"

#define MSG_STOP_PRINT "Stop"

#define MSG_CARD_MENU "Menu karty SD"

#define MSG_NO_CARD "Brak karty"

#define MSG_DWELL "Uspij..."

#define MSG_USERWAIT "Oczekiwanie..."

#define MSG_RESUMING "Wznawianie druku"

#define MSG_NO_MOVE "Brak ruchu"

#define MSG_KILLED "Ubity. "

#define MSG_STOPPED "Zatrzymany. "

#define MSG_STEPPER_RELEASED "Zwolniony."

#define MSG_CONTROL_RETRACT "Wycofaj mm"

#define MSG_CONTROL_RETRACTF "Wycofaj F"

#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"

#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. mm"

#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"

#define MSG_AUTORETRACT "Auto. wycofanie"

#define MSG_FILAMENTCHANGE "Zmien filament"

#define MSG_INIT_SDCARD "Inicjal. karty SD"

#define MSG_CNG_SDCARD "Zmiana karty SD"

#define MSG_ZPROBE_OUT "Sonda Z za lozem"

#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"

#define MSG_ZPROBE_ZOFFSET "Offset Z"

#define MSG_BABYSTEP_X "Babystep X"

#define MSG_BABYSTEP_Y "Babystep Y"

#define MSG_BABYSTEP_Z "Babystep Z"

#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."

#define MSG_CONTRAST "Kontrast"

// Serial Console Messages

#define MSG_Enqueing "Kolejkowanie \""

#define MSG_POWERUP "Zasilanie wlaczone"

#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"

#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"

#define MSG_WATCHDOG_RESET " Reset (watchdog)"

#define MSG_SOFTWARE_RESET " Reset (programowy)"

#define MSG_AUTHOR " | Autor: "

#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "

#define MSG_FREE_MEMORY " Wolna pamiec: "

#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "

#define MSG_OK "OK"

#define MSG_FILE_SAVED "Plik zapisany."

#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki 1; ostatnia linijka:"

#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "

#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"

#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"

#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"

#define MSG_BEGIN_FILE_LIST "Start listy plikow"

#define MSG_END_FILE_LIST "Koniec listy plikow"

#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "

#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "

#define MSG_M200_INVALID_EXTRUDER "M200 Niepoprawny ekstruder "

#define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "

#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("

#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "

#define MSG_HEATING "Nagrzewanie ekstrudera..."

#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."

#define MSG_BED_HEATING "Nagrzewanie loza..."

#define MSG_BED_DONE "Nagrzewanie loza zakonczone."

#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

#define MSG_COUNT_X " Licznik X: "

#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"

#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"

#define MSG_RESEND "Wyslij ponownie: "

#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""

#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "

#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"

#define MSG_X_MIN "x_min: "

#define MSG_X_MAX "x_max: "

#define MSG_Y_MIN "y_min: "

#define MSG_Y_MAX "y_max: "

#define MSG_Z_MIN "z_min: "

#define MSG_Z_MAX "z_max: "

#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"

#define MSG_ENDSTOP_HIT "Wyzwolony"

#define MSG_ENDSTOP_OPEN "Otwarty"

#define MSG_HOTEND_OFFSET "Offsety dysz:"

#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"

#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"

#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"

#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"

#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"

#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"

#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "

#define MSG_SD_FILE_OPENED "Otwarto plik:"

#define MSG_SD_SIZE " Rozmiar:"

#define MSG_SD_FILE_SELECTED "Wybrano plik"

#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "

#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "

#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"

#define MSG_SD_ERR_WRITE_TO_FILE "Wystapil blad podczas zapisu do pliku"

#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "

#define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: "

#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "

#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"

#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"

#define MSG_BABYSTEPPING_X "Babystepping w osi X"

#define MSG_BABYSTEPPING_Y "Babystepping w osi Y"

#define MSG_BABYSTEPPING_Z "Babystepping w osi Z"

#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"

#endif

#if LANGUAGE_CHOICE == 3

// LCD Menu Messages

// Please note these are limited to 17 characters!

#define WELCOME_MSG MACHINE_NAME " prete."

#define MSG_SD_INSERTED "Carte inseree"

#define MSG_SD_REMOVED "Carte retiree"

#define MSG_MAIN "Menu principal"

#define MSG_AUTOSTART "Demarrage auto"

#define MSG_DISABLE_STEPPERS "Arreter moteurs"

#define MSG_AUTO_HOME "Home auto."

#define MSG_SET_ORIGIN "Regler origine"

#define MSG_PREHEAT_PLA " Prechauffage PLA"

#define MSG_PREHEAT_PLA_SETTINGS " Regl. prech. PLA"

#define MSG_PREHEAT_ABS "Prechauffage ABS"

#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"

#define MSG_COOLDOWN "Refroidir"

#define MSG_SWITCH_PS_ON "Allumer alim."

#define MSG_SWITCH_PS_OFF "Eteindre alim."

#define MSG_EXTRUDE "Extrusion"

#define MSG_RETRACT "Retraction"

#define MSG_PREHEAT_PLA "Prechauffage PLA"

#define MSG_PREHEAT_ABS "Prechauffage ABS"

#define MSG_MOVE_AXIS "Deplacer un axe"

#define MSG_MOVE_X "Move X"

#define MSG_MOVE_Y "Move Y"

#define MSG_MOVE_Z "Move Z"

#define MSG_MOVE_E "Extruder"

#define MSG_MOVE_01MM "Move 0.1mm"

#define MSG_MOVE_1MM "Move 1mm"

#define MSG_MOVE_10MM "Move 10mm"

#define MSG_SPEED " Vitesse"

#define MSG_NOZZLE "Buse"

#define MSG_NOZZLE1 "Buse2"

#define MSG_NOZZLE2 "Buse3"

#define MSG_BED "Plateau"

#define MSG_FAN_SPEED "Vite. ventilateur"

#define MSG_FLOW "Flux"

#define MSG_CONTROL "Controler"

#define MSG_MIN " \002 Min"

#define MSG_MAX " \002 Max"

#define MSG_FACTOR " \002 Facteur"

#define MSG_AUTOTEMP "Temp. Auto."

#define MSG_ON "Marche "

#define MSG_OFF "Arret"

#define MSG_PID_P "PID-P"

#define MSG_PID_I "PID-I"

#define MSG_PID_D "PID-D"

#define MSG_PID_C "PID-C"

#define MSG_ACC "Accel"

#define MSG_VXY_JERK "Vxy-jerk"

#define MSG_VZ_JERK "Vz-jerk"

#define MSG_VE_JERK "Ve-jerk"

#define MSG_VMAX "Vmax"

#define MSG_X "x"

#define MSG_Y "y"

#define MSG_Z "z"

#define MSG_E "e"

#define MSG_VMIN "Vmin"

#define MSG_VTRAV_MIN "Vdepl min"

#define MSG_AMAX "Amax "

#define MSG_A_RETRACT "A-retract"

#define MSG_XSTEPS "Xpas/mm"

#define MSG_YSTEPS "Ypas/mm"

#define MSG_ZSTEPS "Zpas/mm"

#define MSG_ESTEPS "Epas/mm"

#define MSG_TEMPERATURE "Temperature"

#define MSG_MOTION "Mouvement"

#define MSG_CONTRAST "Contraste LCD"

#define MSG_STORE_EPROM "Sauver config"

#define MSG_LOAD_EPROM "Lire config"

#define MSG_RESTORE_FAILSAFE "Restaurer defauts"

#define MSG_REFRESH "Actualiser"

#define MSG_WATCH "Surveiller"

#define MSG_PREPARE "Preparer"

#define MSG_TUNE "Regler"

#define MSG_PAUSE_PRINT "Interrompre impr."

#define MSG_RESUME_PRINT "Reprendre impr."

#define MSG_STOP_PRINT "Arreter impr."

#define MSG_CARD_MENU "Impr. depuis SD"

#define MSG_NO_CARD "Pas de carte"

#define MSG_DWELL "Repos..."

#define MSG_USERWAIT "Atten. de l'util."

#define MSG_RESUMING "Repri. de l'impr."

#define MSG_NO_MOVE "Aucun mouvement."

#define MSG_KILLED "MORT."

#define MSG_STOPPED "STOPPE."

#define MSG_STEPPER_RELEASED "RELACHE."

#define MSG_CONTROL_RETRACT "Retraction mm"

#define MSG_CONTROL_RETRACTF "Retraction F"

#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

#define MSG_CONTROL_RETRACT_RECOVER "UnRet mm"

#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"

#define MSG_AUTORETRACT "Retract. Auto."

#define MSG_FILAMENTCHANGE "Changer filament"

#define MSG_INIT_SDCARD "Init. la carte SD"

#define MSG_CNG_SDCARD "Changer de carte"

#define MSG_ZPROBE_OUT "Z sonde exte. lit"

#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"

#define MSG_ZPROBE_ZOFFSET "Offset Z"

#define MSG_BABYSTEP_X "Babystep X"

#define MSG_BABYSTEP_Y "Babystep Y"

#define MSG_BABYSTEP_Z "Babystep Z"

#define MSG_ENDSTOP_ABORT "Butee abandon"

#define MSG_CONTRAST "Contrast"

// Serial Console Messages

#define MSG_Enqueing "Mise en tampon \""

#define MSG_POWERUP "Allumage"

#define MSG_EXTERNAL_RESET " RAZ Externe"

#define MSG_BROWNOUT_RESET " RAZ defaut alim."

#define MSG_WATCHDOG_RESET " RAZ Watchdog"

#define MSG_SOFTWARE_RESET " RAZ logicielle"

#define MSG_AUTHOR " | Auteur: "

#define MSG_CONFIGURATION_VER " Derniere MaJ: "

#define MSG_FREE_MEMORY " Memoire libre: "

#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "

#define MSG_OK "ok"

#define MSG_FILE_SAVED "Fichier enregistre."

#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne 1, derniere ligne: "

#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "

#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "

#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "

#define MSG_FILE_PRINTED "Impression terminee"

#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"

#define MSG_END_FILE_LIST "Fin de la liste de fichiers"

#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"

#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"

#define MSG_M200_INVALID_EXTRUDER "M200 Extruder invalide"

#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"

#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"

#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "

#define MSG_HEATING "En chauffe..."

#define MSG_HEATING_COMPLETE "Chauffe terminee."

#define MSG_BED_HEATING "Chauffe du lit."

#define MSG_BED_DONE "Chauffe du lit terminee."

#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

#define MSG_COUNT_X " Compteur X: "

#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"

#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"

#define MSG_RESEND "Renvoie: "

#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""

#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "

#define MSG_INVALID_EXTRUDER "Extrudeur invalide"

#define MSG_X_MIN "x_min: "

#define MSG_X_MAX "x_max: "

#define MSG_Y_MIN "y_min: "

#define MSG_Y_MAX "y_max: "

#define MSG_Z_MIN "z_min: "

#define MSG_Z_MAX "z_max: "

#define MSG_M119_REPORT "Affichage du status des fin de course"

#define MSG_ENDSTOP_HIT "DECLENCHE"

#define MSG_ENDSTOP_OPEN "OUVERT"

#define MSG_HOTEND_OFFSET "Hotend offsets:"

#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"

#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"

#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"

#define MSG_SD_OPENROOT_FAIL "Echec openRoot"

#define MSG_SD_CARD_OK "Carte SD Ok"

#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"

#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "

#define MSG_SD_FILE_OPENED "Fichier ouvert: "

#define MSG_SD_SIZE " Taille: "

#define MSG_SD_FILE_SELECTED "Fichier selectionne"

#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "

#define MSG_SD_PRINTING_BYTE "Octet impression SD "

#define MSG_SD_NOT_PRINTING "Pas d'impression SD"

#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"

#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "

#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: "

#define MSG_ENDSTOPS_HIT "Fin de course atteint: "

#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"

#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"

#define MSG_BABYSTEPPING_X "Babystepping X"

#define MSG_BABYSTEPPING_Y "Babystepping Y"

#define MSG_BABYSTEPPING_Z "Babystepping Z"

#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"

#endif

#if LANGUAGE_CHOICE == 4

// LCD Menu Messages

// Please note these are limited to 17 characters!

#define WELCOME_MSG MACHINE_NAME " Bereit."

#define MSG_SD_INSERTED "SDKarte erkannt"

#define MSG_SD_REMOVED "SDKarte entfernt"

#define MSG_MAIN "Hauptmenü"

#define MSG_AUTOSTART "Autostart"

#define MSG_DISABLE_STEPPERS "Stepper abschalt."

#define MSG_AUTO_HOME "Auto Nullpunkt"

#define MSG_SET_ORIGIN "Setze Nullpunkt"

#define MSG_PREHEAT_PLA "Vorwärmen PLA"

#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."

#define MSG_PREHEAT_ABS "Vorwärmen ABS"

#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."

#define MSG_COOLDOWN "Abkühlen"

#define MSG_SWITCH_PS_ON "Switch Power On"

#define MSG_SWITCH_PS_OFF "Switch Power Off"

#define MSG_EXTRUDE "Extrude"

#define MSG_RETRACT "Retract"

#define MSG_MOVE_AXIS "Achsen bewegen"

#define MSG_MOVE_X "X bewegen"

#define MSG_MOVE_Y "Y bewegen"

#define MSG_MOVE_Z "Z bewegen"

#define MSG_MOVE_E "Extruder"

#define MSG_MOVE_01MM "0.1mm bewegen"

#define MSG_MOVE_1MM "1mm bewegen"

#define MSG_MOVE_10MM "10mm bewegen"

#define MSG_SPEED "Geschw"

#define MSG_NOZZLE "Düse"

#define MSG_NOZZLE1 "Düse2"

#define MSG_NOZZLE2 "Düse3"

#define MSG_BED "Bett"

#define MSG_FAN_SPEED "Lüftergeschw."

#define MSG_FLOW "Fluss"

#define MSG_CONTROL "Einstellungen"

#define MSG_MIN "\002 Min"

#define MSG_MAX "\002 Max"

#define MSG_FACTOR "\002 Faktor"

#define MSG_AUTOTEMP "AutoTemp"

#define MSG_ON "Ein"

#define MSG_OFF "Aus"

#define MSG_PID_P "PID-P"

#define MSG_PID_I "PID-I"

#define MSG_PID_D "PID-D"

#define MSG_PID_C "PID-C"

#define MSG_ACC "Acc"

#define MSG_VXY_JERK "Vxy-jerk"

#define MSG_VZ_JERK "Vz-jerk"

#define MSG_VE_JERK "Ve-jerk"

#define MSG_VMAX "Vmax "

#define MSG_X "x"

#define MSG_Y "y"

#define MSG_Z "z"

#define MSG_E "e"

#define MSG_VMIN "Vmin"

#define MSG_VTRAV_MIN "VTrav min"

#define MSG_AMAX "Amax "

#define MSG_A_RETRACT "A-Retract"

#define MSG_XSTEPS "Xsteps/mm"

#define MSG_YSTEPS "Ysteps/mm"

#define MSG_ZSTEPS "Zsteps/mm"

#define MSG_ESTEPS "Esteps/mm"

#define MSG_RECTRACT_WIDE "Rectract"

#define MSG_WATCH "Beobachten"

#define MSG_TEMPERATURE "Temperatur"

#define MSG_MOTION "Bewegung"

#define MSG_CONTRAST "LCD contrast"

#define MSG_STORE_EPROM "EPROM speichern"

#define MSG_LOAD_EPROM "EPROM laden"

#define MSG_RESTORE_FAILSAFE "Standardkonfig."

#define MSG_REFRESH "Aktualisieren"

#define MSG_PREPARE "Vorbereitung"

#define MSG_CONTROL "Einstellungen"

#define MSG_TUNE "Justierung"

#define MSG_PAUSE_PRINT "Druck anhalten"

#define MSG_RESUME_PRINT "Druck fortsetz"

#define MSG_STOP_PRINT "Druck stoppen"

#define MSG_CARD_MENU "SDKarten Menü"

#define MSG_NO_CARD "Keine SDKarte"

#define MSG_DWELL "Warten..."

#define MSG_USERWAIT "Warte auf Nutzer"

#define MSG_RESUMING "Druck fortsetzung"

#define MSG_NO_MOVE "Kein Zug."

#define MSG_KILLED "KILLED"

#define MSG_STOPPED "GESTOPPT"

#define MSG_STEPPER_RELEASED "Stepper frei"

#define MSG_CONTROL_RETRACT "Retract mm"

#define MSG_CONTROL_RETRACTF "Retract F"

#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

#define MSG_CONTROL_RETRACT_RECOVER "UnRet mm"

#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"

#define MSG_AUTORETRACT "AutoRetr."

#define MSG_FILAMENTCHANGE "Filament wechseln"

#define MSG_INIT_SDCARD "Init. SD-Card"

#define MSG_CNG_SDCARD "Change SD-Card"

#define MSG_ZPROBE_OUT "Z probe out. bed"

#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

#define MSG_ZPROBE_ZOFFSET "Z Offset"

#define MSG_BABYSTEP_X "Babystep X"

#define MSG_BABYSTEP_Y "Babystep Y"

#define MSG_BABYSTEP_Z "Babystep Z"

#define MSG_ENDSTOP_ABORT "Endstop abort"

#define MSG_CONTRAST "Contrast"

// Serial Console Messages

#define MSG_Enqueing "enqueing \""

#define MSG_POWERUP "PowerUp"

#define MSG_EXTERNAL_RESET " External Reset"

#define MSG_BROWNOUT_RESET " Brown out Reset"

#define MSG_WATCHDOG_RESET " Watchdog Reset"

#define MSG_SOFTWARE_RESET " Software Reset"

#define MSG_AUTHOR " | Author: "

#define MSG_CONFIGURATION_VER " Last Updated: "

#define MSG_FREE_MEMORY " Free Memory: "

#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "

#define MSG_OK "ok"

#define MSG_FILE_SAVED "Done saving file."

#define MSG_ERR_LINE_NO "Line Number is not Last Line Number 1, Last Line:"

#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"

#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"

#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"

#define MSG_FILE_PRINTED "Done printing file"

#define MSG_BEGIN_FILE_LIST "Begin file list"

#define MSG_END_FILE_LIST "End file list"

#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "

#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "

#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "

#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "

#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"

#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "

#define MSG_HEATING "Heating..."

#define MSG_HEATING_COMPLETE "Heating done."

#define MSG_BED_HEATING "Bed Heating."

#define MSG_BED_DONE "Bed done."

#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

#define MSG_COUNT_X " Count X:"

#define MSG_ERR_KILLED "Printer halted. kill() called !!"

#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"

#define MSG_RESEND "Resend:"

#define MSG_UNKNOWN_COMMAND "Unknown command:\""

#define MSG_ACTIVE_EXTRUDER "Active Extruder: "

#define MSG_INVALID_EXTRUDER "Invalid extruder"

#define MSG_X_MIN "x_min: "

#define MSG_X_MAX "x_max: "

#define MSG_Y_MIN "y_min: "

#define MSG_Y_MAX "y_max: "

#define MSG_Z_MIN "z_min: "

#define MSG_Z_MAX "z_max: "

#define MSG_M119_REPORT "Reporting endstop status"

#define MSG_ENDSTOP_HIT "TRIGGERED"

#define MSG_ENDSTOP_OPEN "open"

#define MSG_HOTEND_OFFSET "Hotend offsets:"

#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"

#define MSG_SD_INIT_FAIL "SD init fail"

#define MSG_SD_VOL_INIT_FAIL "volume.init failed"

#define MSG_SD_OPENROOT_FAIL "openRoot failed"

#define MSG_SD_CARD_OK "SD card ok"

#define MSG_SD_WORKDIR_FAIL "workDir open failed"

#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "

#define MSG_SD_FILE_OPENED "File opened:"

#define MSG_SD_SIZE " Size:"

#define MSG_SD_FILE_SELECTED "File selected"

#define MSG_SD_WRITE_TO_FILE "Writing to file: "

#define MSG_SD_PRINTING_BYTE "SD printing byte "

#define MSG_SD_NOT_PRINTING "Not SD printing"

#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"

#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"

#define MSG_STEPPER_TOO_HIGH "Steprate too high : "

#define MSG_ENDSTOPS_HIT "endstops hit: "

#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"

#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"

#define MSG_BABYSTEPPING_X "Babystepping X"

#define MSG_BABYSTEPPING_Y "Babystepping Y"

#define MSG_BABYSTEPPING_Z "Babystepping Z"

#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"

#endif

#if LANGUAGE_CHOICE == 5

// LCD Menu Messages

// Please note these are limited to 17 characters!

#define WELCOME_MSG MACHINE_NAME " lista."

#define MSG_SD_INSERTED "Tarjeta colocada"

#define MSG_SD_REMOVED "Tarjeta retirada"

#define MSG_MAIN "Menu principal"

#define MSG_AUTOSTART " Autostart"

#define MSG_DISABLE_STEPPERS "Apagar motores"

#define MSG_AUTO_HOME "Llevar al origen"

#define MSG_SET_ORIGIN "Establecer cero"

#define MSG_PREHEAT_PLA "Precalentar PLA"

#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"

#define MSG_PREHEAT_ABS "Precalentar ABS"

#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"

#define MSG_COOLDOWN "Enfriar"

#define MSG_SWITCH_PS_ON "Switch Power On"

#define MSG_SWITCH_PS_OFF "Switch Power Off"

#define MSG_EXTRUDE "Extruir"

#define MSG_RETRACT "Retraer"

#define MSG_MOVE_AXIS "Mover ejes"

#define MSG_MOVE_X "Move X"

#define MSG_MOVE_Y "Move Y"

#define MSG_MOVE_Z "Move Z"

#define MSG_MOVE_E "Extruder"

#define MSG_MOVE_01MM "Move 0.1mm"

#define MSG_MOVE_1MM "Move 1mm"

#define MSG_MOVE_10MM "Move 10mm"

#define MSG_SPEED "Velocidad"

#define MSG_NOZZLE "Nozzle"

#define MSG_NOZZLE1 "Nozzle2"

#define MSG_NOZZLE2 "Nozzle3"

#define MSG_BED "Base"

#define MSG_FAN_SPEED "Ventilador"

#define MSG_FLOW "Flujo"

#define MSG_CONTROL "Control"

#define MSG_MIN "\002 Min"

#define MSG_MAX "\002 Max"

#define MSG_FACTOR "\002 Fact"

#define MSG_AUTOTEMP "Autotemp"

#define MSG_ON "On"

#define MSG_OFF "Off"

#define MSG_PID_P "PID-P"

#define MSG_PID_I "PID-I"

#define MSG_PID_D "PID-D"

#define MSG_PID_C "PID-C"

#define MSG_ACC "Acel"

#define MSG_VXY_JERK "Vxy-jerk"

#define MSG_VZ_JERK "Vz-jerk"

#define MSG_VE_JERK "Ve-jerk"

#define MSG_VMAX "Vmax"

#define MSG_X "x"

#define MSG_Y "y"

#define MSG_Z "z"

#define MSG_E "e"

#define MSG_VMIN "Vmin"

#define MSG_VTRAV_MIN "VTrav min"

#define MSG_AMAX "Amax"

#define MSG_A_RETRACT "A-retrac."

#define MSG_XSTEPS "X pasos/mm"

#define MSG_YSTEPS "Y pasos/mm"

#define MSG_ZSTEPS "Z pasos/mm"

#define MSG_ESTEPS "E pasos/mm"

#define MSG_RECTRACT "Retraer"

#define MSG_TEMPERATURE "Temperatura"

#define MSG_MOTION "Movimiento"

#define MSG_STORE_EPROM "Guardar memoria"

#define MSG_LOAD_EPROM "Cargar memoria"

#define MSG_RESTORE_FAILSAFE "Rest. de emergen."

#define MSG_REFRESH "Volver a cargar"

#define MSG_WATCH "Monitorizar"

#define MSG_PREPARE "Preparar"

#define MSG_TUNE "Ajustar"

#define MSG_PAUSE_PRINT "Pausar impresion"

#define MSG_RESUME_PRINT "Reanudar impres."

#define MSG_STOP_PRINT "Detener impresion"

#define MSG_CARD_MENU "Menu de SD"

#define MSG_NO_CARD "No hay tarjeta SD"

#define MSG_DWELL "Reposo..."

#define MSG_USERWAIT "Esperando ordenes"

#define MSG_RESUMING "Resumiendo impre."

#define MSG_NO_MOVE "Sin movimiento"

#define MSG_KILLED "PARADA DE EMERG."

#define MSG_STOPPED "PARADA"

#define MSG_CONTROL_RETRACT "Retraer mm"

#define MSG_CONTROL_RETRACTF "Retraer F"

#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"

#define MSG_CONTROL_RETRACT_RECOVER "DesRet mm"

#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"

#define MSG_AUTORETRACT "AutoRetr."

#define MSG_FILAMENTCHANGE "Change filament"

#define MSG_INIT_SDCARD "Iniciando tarjeta"

#define MSG_CNG_SDCARD "Cambiar tarjeta"

#define MSG_RECTRACT_WIDE "Retraer"

#define MSG_TEMPERATURE_WIDE "Temperatura"

#define MSG_TEMPERATURE_RTN "Temperatura"

#define MSG_MAIN_WIDE "Menu principal"

#define MSG_MOTION_WIDE "Movimiento"

#define MSG_PREPARE_ALT "Preparar"

#define MSG_CONTROL_ARROW "Control"

#define MSG_RETRACT_ARROW "Retraer"

#define MSG_STEPPER_RELEASED "Desacoplada."

#define MSG_ZPROBE_OUT "Z probe out. bed"

#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

#define MSG_ZPROBE_ZOFFSET "Z Offset"

#define MSG_BABYSTEP_X "Babystep X"

#define MSG_BABYSTEP_Y "Babystep Y"

#define MSG_BABYSTEP_Z "Babystep Z"

#define MSG_ENDSTOP_ABORT "Endstop abort"

#define MSG_CONTRAST "Contrast"

// Serial Console Messages

#define MSG_Enqueing "En cola \""

#define MSG_POWERUP "PowerUp"

#define MSG_EXTERNAL_RESET " Reset Externo"

#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"

#define MSG_WATCHDOG_RESET " Reset por Bloqueo"

#define MSG_SOFTWARE_RESET " Reset por Software"

#define MSG_AUTHOR " | Autor: "

#define MSG_CONFIGURATION_VER " Ultima actualizacion: "

#define MSG_FREE_MEMORY " Memoria libre: "

#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "

#define MSG_OK "ok"

#define MSG_FILE_SAVED "Guardado."

#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea 1, Ultima Linea:"

#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"

#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"

#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"

#define MSG_FILE_PRINTED "Impresion terminada"

#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"

#define MSG_END_FILE_LIST "Fin de la lista de archivos"

#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "

#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "

#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido "

#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "

#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"

#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "

#define MSG_HEATING "Calentando..."

#define MSG_HEATING_COMPLETE "Calentamiento Hecho."

#define MSG_BED_HEATING "Calentando la base."

#define MSG_BED_DONE "Base Caliente."

#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

#define MSG_COUNT_X " Cuenta X:"

#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"

#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"

#define MSG_RESEND "Reenviar:"

#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""

#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "

#define MSG_INVALID_EXTRUDER "Extrusor Invalido"

#define MSG_X_MIN "x_min: "

#define MSG_X_MAX "x_max: "

#define MSG_Y_MIN "y_min: "

#define MSG_Y_MAX "y_max: "

#define MSG_Z_MIN "z_min: "

#define MSG_Z_MAX "z_max: "

#define MSG_M119_REPORT "Comprobando fines de carrera."

#define MSG_ENDSTOP_HIT "PULSADO"

#define MSG_ENDSTOP_OPEN "abierto"

#define MSG_HOTEND_OFFSET "Hotend offsets:"

#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."

#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"

#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"

#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"

#define MSG_SD_CARD_OK "Tarjeta SD OK"

#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"

#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "

#define MSG_SD_FILE_OPENED "Archivo abierto:"

#define MSG_SD_SIZE " Tamaño:"

#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"

#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "

#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "

#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"

#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"

#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"

#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : "

#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "

#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"

#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"

#define MSG_BABYSTEPPING_X "Babystepping X"

#define MSG_BABYSTEPPING_Y "Babystepping Y"

#define MSG_BABYSTEPPING_Z "Babystepping Z"

#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"

#endif

#if LANGUAGE_CHOICE == 6

// LCD Menu Messages

// Please note these are limited to 17 characters!

#define WELCOME_MSG MACHINE_NAME " Готов."

#define MSG_SD_INSERTED "Карта вставлена"