Adafruit CircuitPython framebuf driver for SSD1306 or SSD1305 OLED displays. Not for use with displayio. See README.

Library for OLED-displays runs on AVR

Arduino library for the SparkFun Micro OLED - a breakout board for a monochrome, 0.66", 64x48 OLED display.

A Smart HUD Glass built using ESP8266-01 which can communicate through a GET request from any client.

DisplayIO driver for SSD1306 monochrome OLED displays

A MP3 streaming WiFi speaker for ESP8266 & ESP32 chips

Arduino project to upgrade cheap Hobbyking HK-T6A or Flysky FS-CT6B transmitters or any other old RC TX

The FluxGarage RoboEyes library draws smoothly animated robot eyes on OLED displays, using the Adafruit GFX library.

Provides a series of pseudo-display devices which allow the luma.core components to be used without running a physical device.

A split ortholinear keyboard based on Sofle V2 that uses RP2040 Pico MCU, 128x64 OLEDs, RGB lighting, and rotary encoders.

WiFi connection manager for ESP32 and ESP8266 with OLED support

Library for graphical user interface for Arduino/ESP32/ESP8266 programs

A no buffer Arduino library for the SH1106 I2C OLED display, for the lower end AVR devices

MicroPython driver for SSD1327 128x128 4-bit greyscale OLED displays

MicroPython driver for SH1107 OLED displays (128x128 and 128x64 pixels)

C Library to support the I2C 128X64 OLED Display Module driven by the SSD1306 controller for the Raspberry pi SBC eco-system.

A controller for the display and fan of the Raspberry Pi Waveshare PoE HAT written in Rust 🦀

Scanner WiFi avec écran OLED I2C (SSD1306) sur un ESP-01 (ESP8266)

A controller for the display and fan of the Raspi PoE HAT (Type B)

ssd1306 i2c implementation for stm32f103 cortex-m3