Skip to content
/ u-case Public

Represent use cases in a simple and powerful way while writing modular, expressive and sequentially logical code.

rubygems.org/gems/u-case

License

MIT license
527 stars 33 forks Branches Tags Activity
Star
Notifications You must be signed in to change notification settings

serradura/u-case

BranchesTags

Repository files navigation

u-case - Represent use cases in a simple and powerful way while writing modular, expressive and sequentially logical code.

Represent use cases in a simple and powerful way while writing modular, expressive and sequentially logical code.


Ruby Gem Build Status Maintainability Test Coverage

The main project goals are:

  1. Easy to use and easy to learn (input >> process >> output).
  2. Promote immutability (transforming data instead of modifying it) and data integrity.
  3. No callbacks (ex: before, after, around) to avoid code indirections that could compromise the state and understanding of application flows.
  4. Solve complex business logic, by allowing the composition of use cases (flow creation).
  5. Be fast and optimized (Check out the benchmarks section).

Note: Check out the repo https://github.com/serradura/from-fat-controllers-to-use-cases to see a Rails application that uses this gem to handle its business logic.

Documentation

Version Documentation
unreleased https://github.com/serradura/u-case/blob/main/README.md
4.5.1 https://github.com/serradura/u-case/blob/v4.x/README.md
3.1.0 https://github.com/serradura/u-case/blob/v3.x/README.md
2.6.0 https://github.com/serradura/u-case/blob/v2.x/README.md
1.1.0 https://github.com/serradura/u-case/blob/v1.x/README.md

Note: Você entende português? 🇧🇷 🇵🇹 Verifique o README traduzido em pt-BR.

Table of Contents

Compatibility

u-case branch ruby activemodel u-attributes
unreleased main >= 2.2.0 >= 3.2, < 7.0 >= 2.7, < 3.0
4.5.1 v4.x >= 2.2.0 >= 3.2, < 7.0 >= 2.7, < 3.0
3.1.0 v3.x >= 2.2.0 >= 3.2, < 6.1 ~> 1.1
2.6.0 v2.x >= 2.2.0 >= 3.2, < 6.1 ~> 1.1
1.1.0 v1.x >= 2.2.0 >= 3.2, < 6.1 ~> 1.1

Note: The activemodel is an optional dependency, this module can be enabled to validate the use cases' attributes.

Dependencies

  1. kind gem.

    A simple type system (at runtime) for Ruby.

    It is used to validate some internal u-case's methods input. This gem also exposes an ActiveModel validator when requiring the u-case/with_activemodel_validation module, or when the Micro::Case.config was used to enable it.

  2. u-attributes gem.

    This gem allows defining read-only attributes, that is, your objects will have only getters to access their attributes data. It is used to define the use case attributes.

Installation

Add this line to your application's Gemfile:

gem 'u-case', '~> 4.5.1'

And then execute:

$ bundle

Or install it yourself as:

$ gem install u-case

Usage

Micro::Case - How to define a use case?

class Multiply < Micro::Case
  # 1. Define its input as attributes
  attributes :a, :b

  # 2. Define the method `call!` with its business logic
  def call!

    # 3. Wrap the use case output using the `Success(result: *)` or `Failure(result: *)` methods
    if a.is_a?(Numeric) && b.is_a?(Numeric)
      Success result: { number: a * b }
    else
      Failure result: { message: '`a` and `b` attributes must be numeric' }
    end
  end
end

#========================#
# Performing an use case #
#========================#

# Success result

result = Multiply.call(a: 2, b: 2)

result.success? # true
result.data     # { number: 4 }

# Failure result

bad_result = Multiply.call(a: 2, b: '2')

bad_result.failure? # true
bad_result.data     # { message: "`a` and `b` attributes must be numeric" }

# Note:
# ----
# The result of a Micro::Case.call is an instance of Micro::Case::Result

⬆️ Back to Top

Micro::Case::Result - What is a use case result?

A Micro::Case::Result stores the use cases output data. These are their main methods:

  • #success? returns true if is a successful result.
  • #failure? returns true if is an unsuccessful result.
  • #use_case returns the use case responsible for it. This feature is handy to handle a flow failure (this topic will be covered ahead).
  • #type a Symbol which gives meaning for the result, this is useful to declare different types of failures or success.
  • #data the result data itself.
  • #[] and #values_at are shortcuts to access the #data values.
  • #key? returns true if the key is present in #data.
  • #value? returns true if the given value is present in #data.
  • #slice returns a new hash that includes only the given keys. If the given keys don't exist, an empty hash is returned.
  • #on_success or #on_failure are hook methods that help you to define the application flow.
  • #then this method will allow applying a new use case if the current result was a success. The idea of this feature is to allow the creation of dynamic flows.
  • #transitions returns an array with all of transformations wich a result has during a flow.

Note: for backward compatibility, you could use the #value method as an alias of #data method.

⬆️ Back to Top

What are the default result types?

Every result has a type, and these are their default values:

  • :ok when success
  • :error or :exception when failures
class Divide < Micro::Case
  attributes :a, :b

  def call!
    if invalid_attributes.empty?
      Success result: { number: a / b }
    else
      Failure result: { invalid_attributes: invalid_attributes }
    end
  rescue => exception
    Failure result: exception
  end

  private def invalid_attributes
    attributes.select { |_key, value| !value.is_a?(Numeric) }
  end
end

# Success result

result = Divide.call(a: 2, b: 2)

result.type     # :ok
result.data     # { number: 1 }
result.success? # true
result.use_case # #<Divide:0x0000 @__attributes={"a"=>2, "b"=>2}, @a=2, @b=2, @__result=...>

# Failure result (type == :error)

bad_result = Divide.call(a: 2, b: '2')

bad_result.type     # :error
bad_result.data     # { invalid_attributes: { "b"=>"2" } }
bad_result.failure? # true
bad_result.use_case # #<Divide:0x0000 @__attributes={"a"=>2, "b"=>"2"}, @a=2, @b="2", @__result=...>

# Failure result (type == :exception)

err_result = Divide.call(a: 2, b: 0)

err_result.type     # :exception
err_result.data     # { exception: <ZeroDivisionError: divided by 0> }
err_result.failure? # true
err_result.use_case # #<Divide:0x0000 @__attributes={"a"=>2, "b"=>0}, @a=2, @b=0, @__result=#<Micro::Case::Result:0x0000 @use_case=#<Divide:0x0000 ...>, @type=:exception, @value=#<ZeroDivisionError: divided by 0>, @success=false>

# Note:
# ----
# Any Exception instance which is wrapped by
# the Failure(result: *) method will receive `:exception` instead of the `:error` type.

⬆️ Back to Top

How to define custom result types?

Answer: Use a symbol as the argument of Success(), Failure() methods and declare the result: keyword to set the result data.

class Multiply < Micro::Case
  attributes :a, :b

  def call!
    if a.is_a?(Numeric) && b.is_a?(Numeric)
      Success result: { number: a * b }
    else
      Failure :invalid_data, result: {
        attributes: attributes.reject { |_, input| input.is_a?(Numeric) }
      }
    end
  end
end

# Success result

result = Multiply.call(a: 3, b: 2)

result.type     # :ok
result.data     # { number: 6 }
result.success? # true

# Failure result

bad_result = Multiply.call(a: 3, b: '2')

bad_result.type     # :invalid_data
bad_result.data     # { attributes: {"b"=>"2"} }
bad_result.failure? # true

⬆️ Back to Top

Is it possible to define a custom type without a result data?

Answer: Yes, it is possible. But this will have special behavior because the result data will be a hash with the given type as the key and true as its value.

class Multiply < Micro::Case
  attributes :a, :b

  def call!
    if a.is_a?(Numeric) && b.is_a?(Numeric)
      Success result: { number: a * b }
    else
      Failure(:invalid_data)
    end
  end
end

result = Multiply.call(a: 2, b: '2')

result.failure?            # true
result.data                # { :invalid_data => true }
result.type                # :invalid_data
result.use_case.attributes # {"a"=>2, "b"=>"2"}

# Note:
# ----
# This feature is handy to handle failures in a flow
# (this topic will be covered ahead).

⬆️ Back to Top

How to use the result hooks?

As mentioned earlier, the Micro::Case::Result has two methods to improve the application flow control. They are: #on_success, on_failure.

The examples below show how to use them:

class Double < Micro::Case
  attribute :number

  def call!
    return Failure :invalid, result: { msg: 'number must be a numeric value' } unless number.is_a?(Numeric)
    return Failure :lte_zero, result: { msg: 'number must be greater than 0' } if number <= 0

    Success result: { number: number * 2 }
  end
end

#================================#
# Printing the output if success #
#================================#

Double
  .call(number: 3)
  .on_success { |result| p result[:number] }
  .on_failure(:invalid) { |result| raise TypeError, result[:msg] }
  .on_failure(:lte_zero) { |result| raise ArgumentError, result[:msg] }

# The output will be:
#   6

#=============================#
# Raising an error if failure #
#=============================#

Double
  .call(number: -1)
  .on_success { |result| p result[:number] }
  .on_failure { |_result, use_case| puts "#{use_case.class.name} was the use case responsible for the failure" }
  .on_failure(:invalid) { |result| raise TypeError, result[:msg] }
  .on_failure(:lte_zero) { |result| raise ArgumentError, result[:msg] }

# The outputs will be:
#
# 1. It will print the message: Double was the use case responsible for the failure
# 2. It will raise the exception: ArgumentError (the number must be greater than 0)

# Note:
# ----
# The use case responsible for the result will always be accessible as the second hook argument

Why the hook usage without a defined type exposes the result itself?

Answer: To allow you to define how to handle the program flow using some conditional statement like an if or case when.

class Double < Micro::Case
  attribute :number

  def call!
    return Failure(:invalid) unless number.is_a?(Numeric)
    return Failure :lte_zero, result: attributes(:number) if number <= 0

    Success result: { number: number * 2 }
  end
end

Double
  .call(number: -1)
  .on_failure do |result, use_case|
    case result.type
    when :invalid then raise TypeError, "number must be a numeric value"
    when :lte_zero then raise ArgumentError, "number `#{result[:number]}` must be greater than 0"
    else raise NotImplementedError
    end
  end

# The output will be an exception:
#
# ArgumentError (number `-1` must be greater than 0)

Note: The same that was did in the previous examples could be done with #on_success hook!

Using decomposition to access the result data and type

The syntax to decompose an Array can be used in assignments and in method/block arguments. If you doesn't know it, check out the Ruby doc.

# The object exposed in the hook without a type is a Micro::Case::Result and it can be decomposed. e.g:

Double
  .call(number: -2)
  .on_failure do |(data, type), use_case|
    case type
    when :invalid then raise TypeError, 'number must be a numeric value'
    when :lte_zero then raise ArgumentError, "number `#{data[:number]}` must be greater than 0"
    else raise NotImplementedError
    end
  end

# The output will be the exception:
#
# ArgumentError (the number `-2` must be greater than 0)

Note: The same that was did in the previous examples could be done with #on_success hook!

⬆️ Back to Top

What happens if a result hook was declared multiple times?

Answer: The hook always will be triggered if it matches the result type.

class Double < Micro::Case
  attributes :number

  def call!
    if number.is_a?(Numeric)
      Success :computed, result: { number: number * 2 }
    else
      Failure :invalid, result: { msg: 'number must be a numeric value' }
    end
  end
end

result = Double.call(number: 3)
result.data         # { number: 6 }
result[:number] * 4 # 24

accum = 0

result
  .on_success { |result| accum  = result[:number] }
  .on_success { |result| accum  = result[:number] }
  .on_success(:computed) { |result| accum  = result[:number] }
  .on_success(:computed) { |result| accum  = result[:number] }

accum # 24

result[:number] * 4 == accum # true

How to use the Micro::Case::Result#then method?

This method allows you to create dynamic flows, so, with it, you can add new use cases or flows to continue the result transformation. e.g:

class ForbidNegativeNumber < Micro::Case
  attribute :number

  def call!
    return Success result: attributes if number >= 0

    Failure result: attributes
  end
end

class Add3 < Micro::Case
  attribute :number

  def call!
    Success result: { number: number   3 }
  end
end

result1 =
  ForbidNegativeNumber
    .call(number: -1)
    .then(Add3)

result1.data    # {'number' => -1}
result1.failure? # true

# ---

result2 =
  ForbidNegativeNumber
    .call(number: 1)
    .then(Add3)

result2.data     # {'number' => 4}
result2.success? # true

Note: this method changes the Micro::Case::Result#transitions.

⬆️ Back to Top

What does happens when a Micro::Case::Result#then receives a block?

It will yields self (a Micro::Case::Result instance) to the block, and will return the output of the block instead of itself. e.g:

class Add < Micro::Case
  attributes :a, :b

  def call!
    if Kind.of?(Numeric, a, b)
      Success result: { sum: a   b }
    else
      Failure(:attributes_arent_numbers)
    end
  end
end

# --

success_result =
  Add
    .call(a: 2, b: 2)
    .then { |result| result.success? ? result[:sum] : 0 }

puts success_result # 4

# --

failure_result =
  Add
    .call(a: 2, b: '2')
    .then { |result| result.success? ? result[:sum] : 0 }

puts failure_result # 0

⬆️ Back to Top

How to make attributes data injection using this feature?

Pass a Hash as the second argument of the Micro::Case::Result#then method.

Todo::FindAllForUser
  .call(user: current_user, params: params)
  .then(Paginate)
  .then(Serialize::PaginatedRelationAsJson, serializer: Todo::Serializer)
  .on_success { |result| render_json(200, data: result[:todos]) }

⬆️ Back to Top

Micro::Cases::Flow - How to compose use cases?

We call as flow a composition of use cases. The main idea of this feature is to use/reuse use cases as steps of a new use case. e.g.

module Steps
  class ConvertTextToNumbers < Micro::Case
    attribute :numbers

    def call!
      if numbers.all? { |value| String(value) =~ /\d / }
        Success result: { numbers: numbers.map(&:to_i) }
      else
        Failure result: { message: 'numbers must contain only numeric types' }
      end
    end
  end

  class Add2 < Micro::Case::Strict
    attribute :numbers

    def call!
      Success result: { numbers: numbers.map { |number| number   2 } }
    end
  end

  class Double < Micro::Case::Strict
    attribute :numbers

    def call!
      Success result: { numbers: numbers.map { |number| number * 2 } }
    end
  end

  class Square < Micro::Case::Strict
    attribute :numbers

    def call!
      Success result: { numbers: numbers.map { |number| number * number } }
    end
  end
end

#-------------------------------------------#
# Creating a flow using Micro::Cases.flow() #
#-------------------------------------------#

Add2ToAllNumbers = Micro::Cases.flow([
  Steps::ConvertTextToNumbers,
  Steps::Add2
])

result = Add2ToAllNumbers.call(numbers: %w[1 1 2 2 3 4])

result.success? # true
result.data    # {:numbers => [3, 3, 4, 4, 5, 6]}

#-------------------------------#
# Creating a flow using classes #
#-------------------------------#

class DoubleAllNumbers < Micro::Case
  flow Steps::ConvertTextToNumbers,
       Steps::Double
end

DoubleAllNumbers.
  call(numbers: %w[1 1 b 2 3 4]).
  on_failure { |result| puts result[:message] } # "numbers must contain only numeric types"

When happening a failure, the use case responsible will be accessible in the result.

result = DoubleAllNumbers.call(numbers: %w[1 1 b 2 3 4])

result.failure?                                    # true
result.use_case.is_a?(Steps::ConvertTextToNumbers) # true

result.on_failure do |_message, use_case|
  puts "#{use_case.class.name} was the use case responsible for the failure" # Steps::ConvertTextToNumbers was the use case responsible for the failure
end

⬆️ Back to Top

Is it possible to compose a flow with other flows?

Answer: Yes, it is possible.

module Steps
  class ConvertTextToNumbers < Micro::Case
    attribute :numbers

    def call!
      if numbers.all? { |value| String(value) =~ /\d / }
        Success result: { numbers: numbers.map(&:to_i) }
      else
        Failure result: { message: 'numbers must contain only numeric types' }
      end
    end
  end

  class Add2 < Micro::Case::Strict
    attribute :numbers

    def call!
      Success result: { numbers: numbers.map { |number| number   2 } }
    end
  end

  class Double < Micro::Case::Strict
    attribute :numbers

    def call!
      Success result: { numbers: numbers.map { |number| number * 2 } }
    end
  end

  class Square < Micro::Case::Strict
    attribute :numbers

    def call!
      Success result: { numbers: numbers.map { |number| number * number } }
    end
  end
end

DoubleAllNumbers =
  Micro::Cases.flow([Steps::ConvertTextToNumbers, Steps::Double])

SquareAllNumbers =
  Micro::Cases.flow([Steps::ConvertTextToNumbers, Steps::Square])

DoubleAllNumbersAndAdd2 =
  Micro::Cases.flow([DoubleAllNumbers, Steps::Add2])

SquareAllNumbersAndAdd2 =
  Micro::Cases.flow([SquareAllNumbers, Steps::Add2])

SquareAllNumbersAndDouble =
  Micro::Cases.flow([SquareAllNumbersAndAdd2, DoubleAllNumbers])

DoubleAllNumbersAndSquareAndAdd2 =
  Micro::Cases.flow([DoubleAllNumbers, SquareAllNumbersAndAdd2])

SquareAllNumbersAndDouble
  .call(numbers: %w[1 1 2 2 3 4])
  .on_success { |result| p result[:numbers] } # [6, 6, 12, 12, 22, 36]

DoubleAllNumbersAndSquareAndAdd2
  .call(numbers: %w[1 1 2 2 3 4])
  .on_success { |result| p result[:numbers] } # [6, 6, 18, 18, 38, 66]

Note: You can blend any approach to create use case flows - examples.

⬆️ Back to Top

Is it possible a flow accumulates its input and merges each success result to use as the argument of the next use cases?

Answer: Yes, it is possible! Look at the example below to understand how the data accumulation works inside of a flow execution.

module Users
  class FindByEmail < Micro::Case
    attribute :email

    def call!
      user = User.find_by(email: email)

      return Success result: { user: user } if user

      Failure(:user_not_found)
    end
  end
end

module Users
  class ValidatePassword < Micro::Case::Strict
    attributes :user, :password

    def call!
      return Failure(:user_must_be_persisted) if user.new_record?
      return Failure(:wrong_password) if user.wrong_password?(password)

      return Success result: attributes(:user)
    end
  end
end

module Users
  Authenticate = Micro::Cases.flow([
    FindByEmail,
    ValidatePassword
  ])
end

Users::Authenticate
  .call(email: '[email protected]', password: 'password')
  .on_success { |result| sign_in(result[:user]) }
  .on_failure(:wrong_password) { render status: 401 }
  .on_failure(:user_not_found) { render status: 404 }

First, let's see the attributes used by each use case:

class Users::FindByEmail < Micro::Case
  attribute :email
end

class Users::ValidatePassword < Micro::Case
  attributes :user, :password
end

As you can see the Users::ValidatePassword expects a user as its input. So, how does it receives the user? Answer: It receives the user from the Users::FindByEmail success result!

And this is the power of use cases composition because the output of one step will compose the input of the next use case in the flow!

input >> process >> output

Note: Check out these test examples Micro::Cases::Flow and Micro::Cases::Safe::Flow to see different use cases having access to the data in a flow.

⬆️ Back to Top

How to understand what is happening during a flow execution?

Use Micro::Case::Result#transitions!

Let's use the previous section example to ilustrate how to use this feature.

user_authenticated =
  Users::Authenticate.call(email: '[email protected]', password: user_password)

user_authenticated.transitions
[
  {
    :use_case => {
      :class      => Users::FindByEmail,
      :attributes => { :email => "[email protected]" }
    },
    :success => {
      :type  => :ok,
      :result => {
        :user => #<User:0x00007fb57b1c5f88 @email="[email protected]" ...>
      }
    },
    :accessible_attributes => [ :email, :password ]
  },
  {
    :use_case => {
      :class      => Users::ValidatePassword,
      :attributes => {
        :user     => #<User:0x00007fb57b1c5f88 @email="[email protected]" ...>
        :password => "123456"
      }
    },
    :success => {
      :type  => :ok,
      :result => {
        :user => #<User:0x00007fb57b1c5f88 @email="[email protected]" ...>
      }
    },
    :accessible_attributes => [ :email, :password, :user ]
  }
]

The example above shows the output generated by the Micro::Case::Result#transitions. With it is possible to analyze the use cases' execution order and what were the given inputs ([:attributes]) and outputs ([:success][:result]) in the entire execution.

And look up the accessible_attributes property, it shows whats attributes are accessible in that flow step. For example, in the last step, you can see that the accessible_attributes increased because of the data flow accumulation.

Note: The Micro::Case::Result#then increments the Micro::Case::Result#transitions.

Micro::Case::Result#transitions schema
[
  {
    use_case: {
      class:      <Micro::Case>,# Use case which was executed
      attributes: <Hash>        # (Input) The use case's attributes
    },
    [success:, failure:] => {   # (Output)
      type:  <Symbol>,          # Result type. Defaults:
                                # Success = :ok, Failure = :error/:exception
      result: <Hash>            # The data returned by the use case result
    },
    accessible_attributes: <Array>, # Properties that can be accessed by the use case's attributes,
                                    # it starts with Hash used to invoke it and that will be incremented
                                    # with the result values of each use case in the flow.
  }
]
Is it possible disable the Micro::Case::Result#transitions?

Answer: Yes, it is! You can use the Micro::Case.config to do this. Link to this section.

Is it possible to declare a flow that includes the use case itself as a step?

Answer: Yes, it is! You can use self or the self.call! macro. e.g:

class ConvertTextToNumber < Micro::Case
  attribute :text

  def call!
    Success result: { number: text.to_i }
  end
end

class ConvertNumberToText < Micro::Case
  attribute :number

  def call!
    Success result: { text: number.to_s }
  end
end

class Double < Micro::Case
  flow ConvertTextToNumber,
       self.call!,
       ConvertNumberToText

  attribute :number

  def call!
    Success result: { number: number * 2 }
  end
end

result = Double.call(text: '4')

result.success? # true
result[:number] # "8"

Note: This feature can be used with the Micro::Case::Safe. Checkout this test to see an example: https://github.com/serradura/u-case/blob/714c6b658fc6aa02617e6833ddee09eddc760f2a/test/micro/case/safe/with_inner_flow_test.rb

⬆️ Back to Top

Micro::Case::Strict - What is a strict use case?

Answer: it is a kind of use case that will require all the keywords (attributes) on its initialization.

class Double < Micro::Case::Strict
  attribute :numbers

  def call!
    Success result: { numbers: numbers.map { |number| number * 2 } }
  end
end

Double.call({})

# The output will be:
# ArgumentError (missing keyword: :numbers)

⬆️ Back to Top

Micro::Case::Safe - Is there some feature to auto handle exceptions inside of a use case or flow?

Yes, there is one! Like Micro::Case::Strict the Micro::Case::Safe is another kind of use case. It has the ability to auto intercept any exception as a failure result. e.g:

require 'logger'

AppLogger = Logger.new(STDOUT)

class Divide < Micro::Case::Safe
  attributes :a, :b

  def call!
    if a.is_a?(Integer) && b.is_a?(Integer)
      Success result: { number: a / b}
    else
      Failure(:not_an_integer)
    end
  end
end

result = Divide.call(a: 2, b: 0)
result.type == :exception                   # true
result.data                                 # { exception: #<ZeroDivisionError...> }
result[:exception].is_a?(ZeroDivisionError) # true

result.on_failure(:exception) do |result|
  AppLogger.error(result[:exception].message) # E, [2019-08-21T00:05:44.195506 #9532] ERROR -- : divided by 0
end

If you need to handle a specific error, I recommend the usage of a case statement. e,g:

result.on_failure(:exception) do |data, use_case|
  case exception = data[:exception]
  when ZeroDivisionError then AppLogger.error(exception.message)
  else AppLogger.debug("#{use_case.class.name} was the use case responsible for the exception")
  end
end

Note: It is possible to rescue an exception even when is a safe use case. Examples:

u-case/test/micro/case/safe_test.rb

Lines 90 to 118 in 714c6b6

class Divide2ByArgV2 < Micro::Case::Safe
attribute :arg
def call!
Success(result: 2 / arg)
rescue => e
Failure result: e
end
end
class Divide2ByArgV3 < Micro::Case::Safe
attribute :arg
def call!
Success(result: 2 / arg)
rescue => e
Failure :foo, result: e
end
end
class GenerateZeroDivisionError < Micro::Case::Safe
attribute :arg
def call!
Failure(result: arg / 0)
rescue => e
Success(result: e)
end
end

⬆️ Back to Top

Micro::Cases::Safe::Flow

As the safe use cases, safe flows can intercept an exception in any of its steps. These are the ways to define one:

module Users
  Create = Micro::Cases.safe_flow([
    ProcessParams,
    ValidateParams,
    Persist,
    SendToCRM
  ])
end

Defining within classes:

module Users
  class Create < Micro::Case::Safe
    flow ProcessParams,
         ValidateParams,
         Persist,
         SendToCRM
  end
end

⬆️ Back to Top

Micro::Case::Result#on_exception

In functional programming errors/exceptions are handled as regular data, the idea is to transform the output even when it happens an unexpected behavior. For many, exceptions are very similar to the GOTO statement, jumping the application flow to paths which could be difficult to figure out how things work in a system.

To address this the Micro::Case::Result has a special hook #on_exception to helping you to handle the control flow in the case of exceptions.

Note: this feature will work better if you use it with a Micro::Case::Safe flow or use case.

How does it work?

class Divide < Micro::Case::Safe
  attributes :a, :b

  def call!
    Success result: { division: a / b }
  end
end

Divide
  .call(a: 2, b: 0)
  .on_success { |result| puts result[:division] }
  .on_exception(TypeError) { puts 'Please, use only numeric attributes.' }
  .on_exception(ZeroDivisionError) { |_error| puts "Can't divide a number by 0." }
  .on_exception { |_error, _use_case| puts 'Oh no, something went wrong!' }

# Output:
# -------
# Can't divide a number by 0
# Oh no, something went wrong!

Divide
  .call(a: 2, b: '2')
  .on_success { |result| puts result[:division] }
  .on_exception(TypeError) { puts 'Please, use only numeric attributes.' }
  .on_exception(ZeroDivisionError) { |_error| puts "Can't divide a number by 0." }
  .on_exception { |_error, _use_case| puts 'Oh no, something went wrong!' }

# Output:
# -------
# Please, use only numeric attributes.
# Oh no, something went wrong!

As you can see, this hook has the same behavior of result.on_failure(:exception), but, the idea here is to have a better communication in the code, making an explicit reference when some failure happened because of an exception.

⬆️ Back to Top

u-case/with_activemodel_validation - How to validate the use case attributes?

Requirement:

To do this your application must have the activemodel >= 3.2, < 6.1.0 as a dependency.

By default, if your application has ActiveModel as a dependency, any kind of use case can make use of it to validate its attributes.

class Multiply < Micro::Case
  attributes :a, :b

  validates :a, :b, presence: true, numericality: true

  def call!
    return Failure :invalid_attributes, result: { errors: self.errors } if invalid?

    Success result: { number: a * b }
  end
end

But if do you want an automatic way to fail your use cases on validation errors, you could do:

  1. require 'u-case/with_activemodel_validation' in the Gemfile
gem 'u-case', require: 'u-case/with_activemodel_validation'
  1. Use the Micro::Case.config to enable it. Link to this section.

Using this approach, you can rewrite the previous example with less code. e.g:

require 'u-case/with_activemodel_validation'

class Multiply < Micro::Case
  attributes :a, :b

  validates :a, :b, presence: true, numericality: true

  def call!
    Success result: { number: a * b }
  end
end

Note: After requiring the validation mode, the Micro::Case::Strict and Micro::Case::Safe classes will inherit this new behavior.

If I enabled the auto validation, is it possible to disable it only in specific use cases?

Answer: Yes, it is possible. To do this, you will need to use the disable_auto_validation macro. e.g:

require 'u-case/with_activemodel_validation'

class Multiply < Micro::Case
  disable_auto_validation

  attribute :a
  attribute :b
  validates :a, :b, presence: true, numericality: true

  def call!
    Success result: { number: a * b }
  end
end

Multiply.call(a: 2, b: 'a')

# The output will be:
# TypeError (String can't be coerced into Integer)

⬆️ Back to Top

Kind::Validator

The kind gem has a module to enable the validation of data type through ActiveModel validations. So, when you require the 'u-case/with_activemodel_validation', this module will also require the Kind::Validator.

The example below shows how to validate the attributes types.

class Todo::List::AddItem < Micro::Case
  attributes :user, :params

  validates :user, kind: User
  validates :params, kind: ActionController::Parameters

  def call!
    todo_params = params.require(:todo).permit(:title, :due_at)

    todo = user.todos.create(todo_params)

    Success result: { todo: todo }
  rescue ActionController::ParameterMissing => e
    Failure :parameter_missing, result: { message: e.message }
  end
end

⬆️ Back to Top

Micro::Case.config

The idea of this resource is to allow the configuration of some u-case features/modules. I recommend you use it only once in your codebase. e.g. In a Rails initializer.

You can see below, which are the available configurations with their default values:

Micro::Case.config do |config|
  # Use ActiveModel to auto-validate your use cases' attributes.
  config.enable_activemodel_validation = false

  # Use to enable/disable the `Micro::Case::Results#transitions`.
  config.enable_transitions = true
end

⬆️ Back to Top

Benchmarks

Micro::Case

Success results

Gem / Abstraction Iterations per second Comparison
Dry::Monads 315635.1 The Fastest
Micro::Case 75837.7 4.16x slower
Interactor 59745.5 5.28x slower
Trailblazer::Operation 28423.9 11.10x slower
Dry::Transaction 10130.9 31.16x slower
Show the full benchmark/ips results. 
# Warming up --------------------------------------
#           Interactor     5.711k i/100ms
# Trailblazer::Operation
#                          2.283k i/100ms
#          Dry::Monads    31.130k i/100ms
#     Dry::Transaction   994.000  i/100ms
#          Micro::Case     7.911k i/100ms
#    Micro::Case::Safe     7.911k i/100ms
#  Micro::Case::Strict     6.248k i/100ms

# Calculating -------------------------------------
#           Interactor     59.746k (±29.9%) i/s -    274.128k in   5.049901s
# Trailblazer::Operation
#                          28.424k (±15.8%) i/s -    141.546k in   5.087882s
#          Dry::Monads    315.635k (± 6.1%) i/s -      1.588M in   5.048914s
#     Dry::Transaction     10.131k (± 6.4%) i/s -     50.694k in   5.025150s
#          Micro::Case     75.838k (± 9.7%) i/s -    379.728k in   5.052573s
#    Micro::Case::Safe     75.461k (±10.1%) i/s -    379.728k in   5.079238s
#  Micro::Case::Strict     64.235k (± 9.0%) i/s -    324.896k in   5.097028s

# Comparison:
#          Dry::Monads:   315635.1 i/s
#          Micro::Case:    75837.7 i/s - 4.16x  (± 0.00) slower
#    Micro::Case::Safe:    75461.3 i/s - 4.18x  (± 0.00) slower
#  Micro::Case::Strict:    64234.9 i/s - 4.91x  (± 0.00) slower
#           Interactor:    59745.5 i/s - 5.28x  (± 0.00) slower
# Trailblazer::Operation:    28423.9 i/s - 11.10x  (± 0.00) slower
#     Dry::Transaction:    10130.9 i/s - 31.16x  (± 0.00) slower

https://github.com/serradura/u-case/blob/main/benchmarks/perfomance/use_case/success_results.rb

Failure results

Gem / Abstraction Iterations per second Comparison
Dry::Monads 135386.9 The Fastest
Micro::Case 73489.3 1.85x slower
Trailblazer::Operation 29016.4 4.67x slower
Interactor 27037.0 5.01x slower
Dry::Transaction 8988.6 15.06x slower
Show the full benchmark/ips results. 
# Warming up --------------------------------------
#           Interactor     2.626k i/100ms
# Trailblazer::Operation   2.343k i/100ms
#          Dry::Monads    13.386k i/100ms
#     Dry::Transaction   868.000  i/100ms
#          Micro::Case     7.603k i/100ms
#    Micro::Case::Safe     7.598k i/100ms
#  Micro::Case::Strict     6.178k i/100ms

# Calculating -------------------------------------
#           Interactor     27.037k (±24.9%) i/s -    128.674k in   5.102133s
# Trailblazer::Operation   29.016k (±12.4%) i/s -    145.266k in   5.074991s
#          Dry::Monads    135.387k (±15.1%) i/s -    669.300k in   5.055356s
#     Dry::Transaction      8.989k (± 9.2%) i/s -     45.136k in   5.084820s
#          Micro::Case     73.247k (± 9.9%) i/s -    364.944k in   5.030449s
#    Micro::Case::Safe     73.489k (± 9.6%) i/s -    364.704k in   5.007282s
#  Micro::Case::Strict     61.980k (± 8.0%) i/s -    308.900k in   5.014821s

# Comparison:
#          Dry::Monads:   135386.9 i/s
#    Micro::Case::Safe:    73489.3 i/s - 1.84x  (± 0.00) slower
#          Micro::Case:    73246.6 i/s - 1.85x  (± 0.00) slower
#  Micro::Case::Strict:    61979.7 i/s - 2.18x  (± 0.00) slower
# Trailblazer::Operation:    29016.4 i/s - 4.67x  (± 0.00) slower
#           Interactor:    27037.0 i/s - 5.01x  (± 0.00) slower
#     Dry::Transaction:     8988.6 i/s - 15.06x  (± 0.00) slower

https://github.com/serradura/u-case/blob/main/benchmarks/perfomance/use_case/failure_results.rb

Micro::Cases::Flow

Gems / Abstraction Success results Failure results
Micro::Case::Result pipe method 80936.2 i/s 78280.4 i/s
Micro::Case::Result then method 0x slower 0x slower
Micro::Cases.flow 0x slower 0x slower
Micro::Case class with an inner flow 1.72x slower 1.68x slower
Micro::Case class including itself as a step 1.93x slower 1.87x slower
Interactor::Organizer 3.33x slower 3.22x slower

* The Dry::Monads, Dry::Transaction, Trailblazer::Operation gems are out of this analysis because all of them doesn't have this kind of feature.

Success results - Show the full benchmark/ips results. 
# Warming up --------------------------------------
# Interactor::Organizer             1.809k i/100ms
# Micro::Cases.flow([])             7.808k i/100ms
# Micro::Case flow in a class       4.816k i/100ms
# Micro::Case including the class   4.094k i/100ms
# Micro::Case::Result#|             7.656k i/100ms
# Micro::Case::Result#then          7.138k i/100ms

# Calculating -------------------------------------
# Interactor::Organizer             24.290k (±24.0%) i/s -    113.967k in   5.032825s
# Micro::Cases.flow([])             74.790k (±11.1%) i/s -    374.784k in   5.071740s
# Micro::Case flow in a class       47.043k (± 8.0%) i/s -    235.984k in   5.047477s
# Micro::Case including the class   42.030k (± 8.5%) i/s -    208.794k in   5.002138s
# Micro::Case::Result#|             80.936k (±15.9%) i/s -    398.112k in   5.052531s
# Micro::Case::Result#then          71.459k (± 8.8%) i/s -    356.900k in   5.030526s

# Comparison:
# Micro::Case::Result#|:            80936.2 i/s
# Micro::Cases.flow([]):            74790.1 i/s - same-ish: difference falls within error
# Micro::Case::Result#then:         71459.5 i/s - same-ish: difference falls within error
# Micro::Case flow in a class:      47042.6 i/s - 1.72x  (± 0.00) slower
# Micro::Case including the class:  42030.2 i/s - 1.93x  (± 0.00) slower
# Interactor::Organizer:            24290.3 i/s - 3.33x  (± 0.00) slower
Failure results - Show the full benchmark/ips results. 
# Warming up --------------------------------------
# Interactor::Organizer            1.734k i/100ms
# Micro::Cases.flow([])            7.515k i/100ms
# Micro::Case flow in a class      4.636k i/100ms
# Micro::Case including the class  4.114k i/100ms
# Micro::Case::Result#|            7.588k i/100ms
# Micro::Case::Result#then         6.681k i/100ms

# Calculating -------------------------------------
# Interactor::Organizer            24.280k (±24.5%) i/s -    112.710k in   5.013334s
# Micro::Cases.flow([])            74.999k (± 9.8%) i/s -    375.750k in   5.055777s
# Micro::Case flow in a class      46.681k (± 9.3%) i/s -    236.436k in   5.105105s
# Micro::Case including the class  41.921k (± 8.9%) i/s -    209.814k in   5.043622s
# Micro::Case::Result#|            78.280k (±12.6%) i/s -    386.988k in   5.022146s
# Micro::Case::Result#then         68.898k (± 8.8%) i/s -    347.412k in   5.080116s

# Comparison:
# Micro::Case::Result#|:            78280.4 i/s
# Micro::Cases.flow([]):            74999.4 i/s - same-ish: difference falls within error
# Micro::Case::Result#then:         68898.4 i/s - same-ish: difference falls within error
# Micro::Case flow in a class:      46681.0 i/s - 1.68x  (± 0.00) slower
# Micro::Case including the class:  41920.8 i/s - 1.87x  (± 0.00) slower
# Interactor::Organizer:            24280.0 i/s - 3.22x  (± 0.00) slower

https://github.com/serradura/u-case/blob/main/benchmarks/perfomance/flow/

⬆️ Back to Top

Running the benchmarks

Performance (Benchmarks IPS)

Clone this repo and access its folder, then run the commands below:

Use cases

ruby benchmarks/perfomance/use_case/failure_results.rb
ruby benchmarks/perfomance/use_case/success_results.rb

Flows

ruby benchmarks/perfomance/flow/failure_results.rb
ruby benchmarks/perfomance/flow/success_results.rb

Memory profiling

Use cases

./benchmarks/memory/use_case/success/with_transitions/analyze.sh
./benchmarks/memory/use_case/success/without_transitions/analyze.sh

Flows

./benchmarks/memory/flow/success/with_transitions/analyze.sh
./benchmarks/memory/flow/success/without_transitions/analyze.sh

⬆️ Back to Top

Comparisons

Check it out implementations of the same use case with different gems/abstractions.

⬆️ Back to Top

Examples

1️⃣ Users creation

An example of a flow that defines steps to sanitize, validate, and persist its input data. It has all possible approaches to represent use cases using the u-case gem.

Link: https://github.com/serradura/u-case/blob/main/examples/users_creation

2️⃣ Rails App (API)

This project shows different kinds of architecture (one per commit), and in the last one, how to use the Micro::Case gem to handle the application business logic.

Link: https://github.com/serradura/from-fat-controllers-to-use-cases

3️⃣ CLI calculator

Rake tasks to demonstrate how to handle user data, and how to use different failure types to control the program flow.

Link: https://github.com/serradura/u-case/tree/main/examples/calculator

4️⃣ Rescuing exceptions inside of the use cases

Link: https://github.com/serradura/u-case/blob/main/examples/rescuing_exceptions.rb

⬆️ Back to Top

Development

After checking out the repo, run bin/setup to install dependencies. Then, run ./test.sh to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/serradura/u-case. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the Contributor Covenant code of conduct.

License

The gem is available as open source under the terms of the MIT License.

Code of Conduct

Everyone interacting in the Micro::Case project’s codebases, issue trackers, chat rooms and mailing lists is expected to follow the code of conduct.

About

Represent use cases in a simple and powerful way while writing modular, expressive and sequentially logical code.

rubygems.org/gems/u-case

Topics

ruby ruby-gem command service-object interactors business-logic use-case application-flow u-attributes no-callbacks

Resources

Readme

License

MIT license

Code of conduct

Code of conduct
Activity

Stars

527 stars

Watchers

19 watching

Forks

33 forks
Report repository

Releases

54 tags

Packages

No packages published

Contributors 12

Languages