Software for IC programming, testing, debugging and hacking using python3, gcc and the arduino due.
- Test control from the python shell (ipyhon3 or jupyter-lab).
- Debug control from the python shell with the arduino due as debug hardware.
- Arduino Due as adapter for SPI, I2C, UART and HDQ.
- MIT licensed SAM3x8e libraries.
- No need for any IDE.
- A python3 package with samba, loader, programmer, tester, debugger and adapter classes. The samba class talks to the SAM-BA ROM code of the SAM3x8e MCU. The other classes communicate with a corresponding handler on the arduino due target via application protocol data units (APDUs).
- Self-contained C-code for the sam3x8e / arduino due including a driver library, loader, programmer, tester, debugger and adapter handlers, and Makefiles for the ARM gnu toolchain.
- A programmer for flashing code into the arduino due.
- A debugger with python control the arduino due as debugger hardware for debugging any system supporting the SWD protocol.
- An adapter for protocols SPI, I2C, UART and HDQ with the arduino due as adapter hardware.
We are going to publish a few jupyter-notebooks and youtube videos to show how to use the testbench in practical examples.
The software was tested on a Debian 10 system with the following packages installed:
- gcc-arm-none-eabi (15:7-2018-q2-6)
- binutils-arm-none-eabi (2.31.1-12 11)
- ipython3 (5.8.0-1)
- python3-serial (3.4-4)
The application requires at least one arduino due board. The adapter application additionally requires any target with SPI, I2C, or HDQ interface. The debugger application requires any target with SWD interface.