Waldo is a simple command line application that allows you to ask questions and search the Internet. It wraps around the DuckDuckGo search engine, the Ollama LLM framework, OpenAI's GPT models as well as Google's Gemini model.
Install cmake and go:
$ brew install cmake go
Then generate dependencies:
$ go generate ./...
Then build the binary:
$ go build .
Install cmake and Go on your operating system.
Then generate dependencies:
$ go generate ./...
Then build the binary:
$go build .
$ ./run
Type help on the waldo prompt to see the commands.
Commands:
add add a new model to Waldo
ask ask waldo
clear clear the screen
exit exit waldo
help display help
info information about Waldo
search search the Internet
shell run shell commands
switch switch to a different model
You can add a local model into Waldo and use it. Waldo's local models are based off Ollama's so you can add any of the Ollama models available here https://ollama.ai/library.
waldo> add
model name? phi:chat
verifying sha256 digest
writing manifest
removing any unused layers
success
(1 second 979 milliseconds)
waldo>
(The output below shows ~2 seconds to add phi:chat because it's already added)
You can switch to any of the local models that you have downloaded and added to Waldo. If you want to use OpenAI or Google Gemini, please get an API key first, then add it into the .env file.
Your current model is llama2:7b-chat. Which model to switch to?
❯ gpt-3.5-turbo
gpt-4
gpt-4-turbo
gpt-4-vision
gemini-pro
gemini-pro-vision
codellama:13b
codellama:latest
falcon:latest
llama2:13b
llama2:7b-chat
llama2:latest
llava:13b
llava:7b
mistral:latest
phi:chat
vicuna:7b-16k
yi:34b
Provides information about Waldo.
Allows you to step into a shell-like environment within Waldo.
waldo> shell
shell> ls -al
executing> ls -al
total 53144
drwxr-xr-x 18 sausheong staff 576 Dec 30 15:08 .
drwxr-xr-x 129 sausheong staff 4128 Dec 28 23:01 ..
-rw-r--r-- 1 sausheong staff 166 Dec 30 15:02 .env
-rw-r--r-- 1 sausheong staff 126 Dec 30 15:02 .env.example
drwxr-xr-x 13 sausheong staff 416 Dec 30 15:09 .git
-rw-r--r-- 1 sausheong staff 30 Dec 30 15:02 .gitignore
-rw-r--r-- 1 sausheong staff 79 Dec 29 00:28 .gitmodules
-rw-r--r-- 1 sausheong staff 1116 Dec 30 15:04 README.md
drwxr-xr-x 3 sausheong staff 96 Dec 29 22:27 assets
-rw-r--r-- 1 sausheong staff 3926 Dec 30 14:48 go.mod
-rw-r--r-- 1 sausheong staff 31271 Dec 30 14:48 go.sum
-rw-r--r-- 1 sausheong staff 43 Dec 30 14:23 llama.log
-rw-r--r-- 1 sausheong staff 6653 Dec 30 14:54 main.go
drwxr-xr-x 28 sausheong staff 896 Dec 29 11:11 ollama
-rwxr-xr-x 1 sausheong staff 20 Dec 30 15:08 run
-rw-r--r-- 1 sausheong staff 2528 Dec 30 09:54 types.go
-rwxr-xr-x 1 sausheong staff 27120498 Dec 30 14:56 waldo
-rw-r--r-- 1 sausheong staff 5711 Dec 30 14:56 waldo.go
Allows you to ask the current model any questions.
waldo> ask
ask> Why is the sky blue?
The sky appears blue because of a phenomenon called Rayleigh scattering. When sunlight enters Earth's atmosphere, it encounters tiny molecules of gases such as nitrogen and oxygen. These molecules absorb and scatter the light in all directions, but they scatter shorter (blue) wavelengths more than longer (red) wavelengths. This is known as Rayleigh scattering.
As a result of this scattering, the blue light is dispersed throughout the atmosphere, giving the sky its blue appearance. The blue color we see is actually the combination of light from the sun that has been scattered in all directions by the tiny molecules of gases in the atmosphere.
So, to summarize, the sky appears blue because of the way light interacts with the tiny molecules of gases in Earth's atmosphere through Rayleigh scattering.
(5 seconds 279 milliseconds)
Allows you to ask for answers through the Internet (using DuckDuckGo).
waldo> search
search> COVID-19 cases in Singapore
The query "COVID-19 cases in Singapore" has resulted in several relevant search results that provide up-to-date information on the current situation of COVID-19 in Singapore. Here are some key points from each result:
* According to the Ministry of Health (MOH) website, the estimated number of COVID-19 cases in Singapore rose to 56,043 in the week of December 3 to 9, compared to 32,035 cases in the previous week. The average daily COVID-19 hospitalizations also increased to 350 from 225 in the previous week, while the average daily Intensive Care Unit (ICU) cases rose to nine cases from four cases in the previous week. (Source: MOH | COVID-19 Statistics - Ministry of Health)
* Singapore has seen a significant increase in COVID-19 cases in recent weeks, with the number of new cases admitted to hospitals jumping to 965 in the past week, up from 763 the previous week. (Source: New weekly COVID-19 cases admitted to hospitals and ICUs highest for ... - CNA)
* The Ministry of Health (MOH) has also confirmed that there have been rumors about a large increase in severe COVID-19 cases and deaths due to the XBB strain, but these are not true. (Source: Latest COVID-19 News and Data - CNA)
* To prepare for another potential COVID-19 wave, Singapore has taken various measures such as increasing the capacity of isolation facilities and enhancing contact tracing efforts. (Source: Is Singapore ready for another COVID-19 wave? - CNA)
Overall, these search results suggest that COVID-19 cases in Singapore have been on the rise in recent weeks, with a significant increase in hospitalizations and ICU cases. The Ministry of Health has also taken measures to prepare for another potential COVID-19 wave.
List of URLs returned:
* [MOH | COVID-19 Statistics - Ministry of Health](https://www.moh.gov.sg/covid-19/statistics)
* [Singapore COVID - Coronavirus Statistics - Worldometer](https://www.worldometers.info/coronavirus/country/singapore/)
* [MOH | News Highlights - Ministry of Health](https://www.moh.gov.sg/news-highlights/details/update-on-local-covid-19-situation-and-measures-to-protect-healthcare-capacity)
* [Latest COVID-19 News and Data - CNA](https://www.channelnewsasia.com/coronavirus-covid-19)
* [Is Singapore ready for another COVID-19 wave? - CNA](https://www.channelnewsasia.com/singapore/is-singapore-ready-for-another-covid-19-wave-1435176)
* [New weekly COVID-19 cases admitted to hospitals and ICUs highest for ... - CNA](https://www.channelnewsasia.com/singapore/new-weekly-covid-19-cases-admitted-to-hospitals-and-icu-highest-for-2023-4005086)
(28 seconds 222 milliseconds)
Allows you to ask questions on images using the image command. This only works for certain local multi-modal LLMs like Llava and Bakllava, as well as Gemini-Pro-Vision and GPT-4-Vision. If you're not using any of them, you will be asked to switch to any of them first.
Once you issue the image command, you will be asked to add image file(s) (one or more, separated by a space). These image files will be the subject for your questions.
Under images> prompt, when you issue the command /clear you will clear the image cache and Waldo will ask you to add image file(s) again.
If you're running iTerm2 on MacOS, under images> prompt, when you issue the command /show, you can display the images inline.
