Base platform for robotics application using the KR260 Starter Kit

NNgen: A Fully-Customizable Hardware Synthesis Compiler for Deep Neural Network

This repository was developed in the context of the Pervasive AI Developer Contest with AMD

Source code and schematics for the mini OCXO (Oven Controlled Crystal Oscillator) generator with independently programmable 3x outputs

Work being done on the DVB-receiver for Phase 4 Ground.

RTL implementation of components for DVB-S2

Free and Open Source API and drivers for immersive technology.

Do-it-Yourself Geiger Counter YouTube video

Create simple APRS modulator using Arduino UNO

6 GHz CW RF generator based on a MAX2871, STM32F030K6 and F1958

Linux Driver Development with Raspberry Pi - Practical Labs

Pluto DVB2 Firmware for DATV based on maia-sdr scripts

Run gnuradio based automated FT8 QSOs

An FPGA-based USB full-speed device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB full-speed device端…

PICDIV firmware - PIC micocontroller based 10MHz to 1PPS divider/counter, from http://www.leapsecond.com/pic/picdiv.htm

An HDMI video source using a Raspberry Pi 3 to display Test Cards, WebCams and Pi Cameras

Qt-based digital signal analyzer, using Suscan core and Sigutils DSP library

A cross platform library for interfacing with local and remote Linux IIO devices

open-source IEEE 802.11 WiFi baseband FPGA (chip) design: driver, software

PYNQ-Z1 AD936X openwifi capable SDR platform

Low cost frequency generator 0/100 MHz driven by Arduino

A VFO between 4 KHz and 225 MHz based on Si5351 and Arduino Nano

基于ZYNQ AD9363的开源SDR硬件

DVB-S2 Receiver Extensions for GNU Radio