R43ples (Revision for triples) is an open source Revision Management Tool for the Semantic Web.

It provides different revisions of named graphs via a SPARQL interface. All information about revisions, changes, commits, branches and tags are stored in additional named graphs beside the original graph in an attached external triple store.

This project provides an enhanced SPARQL endpoint for revision management of named graphs. R43ples uses an internal Jena TDB is attached to an existing SPARQL endpoint of a triplestore and acts as another endpoint both for normal SPARQL queries as well as for revision-enhanced SPARQL queries, named R43ples queries. The R43ples endpoint allows to specify revisions which should be queried for each named graph used inside a SPARQL query. The whole revision information is stored in additional graphs in the attached Jena TDB.

The website of R43ples contains further project information including Javadocs of the develop branch. A running test server should be available under http://eatld.et.tu-dresden.de:9998/r43ples/sparql

• JDK 1.8

• Maven

  sudo apt-get install maven default-jdk

Maven is used for compiling

mvn compile exec:java

Packages (JAR with dependencies for the webservice) can be be built with:

mvn package

R43ples runs with standalone web server

java -jar target/r43ples.jar

Releases are stored on GitHub.

There are also stable and latest docker images available:

docker pull plttud/r43ples

Run default r43ples via docker

docker run -p 9998:9998 plttud/r43ples

Run with specific configuration

docker run -p 9998:9998 -v $PWD/r43ples.conf:/r43ples.conf plttud/r43ples

There is a configuration file named resources/r43ples.conf. The most important ones are the following:

• triplestore.type - type of attached triplestore (can be tdb, virtuoso [not working right now], http)
• triplestore.uri - URI or path under which R43ples can access the attached triplestore
• triplestore.user - user of attached triplestore if necessary
• triplestore.password - password of attached triplestore if necessary
• revision.graph - named graph which is used by R43ples to store revision graph information
• evolution.graph - named graph which is used by R43ples to store all information regarding evolutions
• sdg.graph - named graph for storing the SDG
• sdg.graph.defaultContent - default content of SDG which should be stored within named graph (sdg.graph)
• sdg.graph.defaultSDG - Structural Definition Group within the named graph (sdg.graph) which should be associated with new graphs under revision control (mmo:hasDefaultSDG)
• rules.graph - named graph for storing the high level change aggregation and co-evolution rules
• rules.graph.defaultContent - default content of rules
• service.host - host which provides R43ples
• service.port - port which should provide R43ples
• service.path - path of host which should provide R43ples

The logging configuration is stored in resources/log4j.properties

SPARQL endpoint is available at:

[uri]:[port]/r43ples/sparql

The endpoint directly accepts SPARQL queries with HTTP GET or HTTP POST parameters for query and format:

[uri]:[port]/r43ples/sparql?query=[]&format=[]

The formats can be specified as URL Path Parameter format, as HTTP post paramter format or as HTTP header parameter Accept:

• text/turtle
• application/json
• application/rdf xml
• text/html
• text/plain

There are some additional keywords which extends SPARQL and can be used to control the revisions of graphs:

• Create graph

    CREATE GRAPH <graph>
  

• Select query

    SELECT *
    WHERE {
    	GRAPH <graph> REVISION "23" {?s ?p ?o}
    }
    
    SELECT *
    WHERE {
        GRAPH <graph> REVISION "master" {?s ?p ?o}
    }
  

• Update query

    USER "mgraube" MESSAGE "test commit"
    INSERT {
        GRAPH <test> BRANCH "master" {
            <a> <b> <c> .
        }
    }
    
    USER "mgraube" MESSAGE "test commit"
    DELETE {
        GRAPH <test> BRANCH "develop" {
            <a> <b> <c> .
        }
    }
  

• Branching

    USER "mgraube"
    MESSAGE "test commit"
    BRANCH GRAPH <test> REVISION "2" TO "unstable"
  

• Tagging

    USER "mgraube"
    MESSAGE "test commit"
    TAG GRAPH <test> REVISION "2" TO "v0.3-alpha"
  

• Merging

    USER "Mister X."
    MESSAGE "merge example for a common merge"
    MERGE GRAPH <test> BRANCH "branch-1" INTO BRANCH "branch-2"
    
    USER "Mister X."
    MESSAGE "merge example for automatica conflict resolution based upon specified SDD"
    MERGE AUTO GRAPH <test> BRANCH "branch-1" INTO BRANCH "branch-2"
    
    USER "Mister X."
    MESSAGE "merge example for a common merge with conflict resolution in WITH part"
    MERGE GRAPH <test> BRANCH "branch-1" INTO BRANCH "branch-2" WITH {
        <http://test.com/Carlos> <http://test.com/knows> <http://test.com/Danny> .
        <http://test.com/Franz> <http://test.com/knows> <http://test.com/Silvia> .
    }
    
    USER "Mister X."
    MESSAGE "merge example for manual specification of merged revision content"
    MERGE MANUAL GRAPH <test> BRANCH "branch-1" INTO BRANCH "branch-2" WITH {
        <http://test.com/Carlos> <http://test.com/knows> <http://test.com/Danny> .
        <http://test.com/Franz> <http://test.com/knows> <http://test.com/Silvia> .
    }
  

• Pick a revision into a branch

    USER "Mister X."
    MESSAGE "pick single revision example"
    PICK GRAPH <test> REVISION "56" INTO BRANCH "develop"
    
    USER "Mister X."
    MESSAGE "pick multiple revisions example"
    PICK GRAPH <test> REVISION "56" TO REVISION "62" INTO BRANCH "develop"
  

• Aggregate atomic changes to high level ones (semantic changes)

    AGG GRAPH <test> REVISION "1" TO REVISION "2"
  

• Coevolve semantic changes to dependent revised graphs

    USER "Mister X."
    MESSAGE "Coevolution example"
    COEVO GRAPH <test> REVISION "1" TO REVISION "2"
  

There is a new option for R43ples which improves the performance. The necessary revision is not temporarily generated anymore. The SPARQL query is rewritten in such a way that the branch and the change sets are directly joined inside the query. This includes the order of the change sets. It is currently under development and further research.

The option can be enabled by passing an additional parameter "query_rewriting=true"

It currently supports:

• Multiple Graphs
• Multiple TriplePath
• FILTER
• MINUS

For more details, have a look into the doc/ directory.

R43ples redirects the queries performed on the debug endpoint directly to the attached triplstore. Thus, this endpoint can be used for debugging purposes.

[uri]:[port]/r43ples/debug

R43ples provides some functionalities additionally via an external API, even if all information can also be queried directly from the triplestore

• api/getRevisedGraphs lists all graphs managed by R43ples
• createSampleDataset generates some sample datasets with revision information
• revisiongraph?graph=&format=application/json provides the revision graph for the specified graph (

R43ples itself does not story any information. All information in the revised graphs and about the revised graphs are stored in the attached triplestore. R43ples acts only as a proxy which evaluates additional revision information in the SPARQL queries.

All information about the revision history of all named graphs is stored in the named graph http://eatld.et.tu-dresden.de/r43ples-revisions (as long as not configured otherwise in the configuration file).

Here, the Revision Management Ontology (RMO) is used to model revisions, branches and tags. Furthermore commits are stored which connect each revision, tag and branch with its prior revision.

The RMO is derived from the PROV ontology:

An exemplary revision graph is shown here: 

Each response header contains information about the revision information of the graphs specified in the requests in the r43ples-revisiongraph HTTP header field. This information follows the RMO and is transferred as Turtle serialization.

Clients can also pass this information in R43ples update queries to the R43ples server via the r43ples-revisiongraph HTTP header attribute. The server will check if the client is aware of the most recent version of the involved revised graphs. If this is not the case, the update query will be rejected.

Following libraries are used in R43ples:

• Jersey for RestFul web services in Java
• Grizzly as web server
• Jena ARQ for processing SPARQL results
• Jena TDB as triplestore
• jQuery as JavaScript framework
• Bootstrap as HTML, CSS and JS framework
• Mustache as template engine
• SpinRDF as SPIN engine

Following articles describe the funcionalities and rationales of R43ples:

• Graube, M., Hensel, S., & Urbas, L. (2014). R43ples: Revisions for Triples—An Approach for Version Control in the Semantic Web. In M. Knuth, D. Kontokostas, & H. Sack (Eds.), Proceedings of the 1st Workshop on Linked Data Quality (LDQ)
• Graube, M., Hensel, S., & Urbas, L. (2016). Open Semantic Revision Control with R43ples—Extending SPARQL to access revisions of Named Graphs. Presented at the SEMANTICS, Leipzig