This is the Go SDK for Oracle Cloud Infrastructure. This project is open source and maintained by Oracle Corp. The home page for the project is here.
Are you a Developer using the OCI SDK? If so, please fill out our survey to help us make the OCI SDK better for you. Click here for the survey page.
- Install Go programming language, Go1.17, 1.18, 1.19, 1.20, and 1.21 are supported By OCI Go SDK.
- Install GNU Make, using the package manager or binary distribution tool appropriate for your platform.
- The breaking changes in service client APIs will no longer result in a major version bump (x 1.y.z relative to the last published version). Instead, we will bump the minor version of the SDK (x.y 1.z relative to the last published version).
- If there are no breaking changes in a release, we will bump the patch version of the SDK (x.y.z 1 relative to the last published version). We will continue to announce any breaking changes in a new version under the Breaking Changes section in the release changelog and on the Github release page [https://github.com/oracle/oci-go-sdk/releases].
- However, breaking changes in the SDK's common module will continue to result in a major version bump (x 1.y.z relative to the last published version). That said, we'll continue to maintain backward compatibility as much as possible to minimize the effort involved in upgrading the SDK version used by your code.
If you want to install the SDK under $GOPATH, you can use go get
to retrieve the SDK:
go get -u github.com/oracle/oci-go-sdk
If you are using Go modules, you can install by running the following command within a folder containing a go.mod
file:
go get -d github.com/oracle/oci-go-sdk/v49@latest
The latest major version (for example v49
) can be identified on the Github releases page.
Alternatively, you can install a specific version (supported from v25.0.0
on):
go get -d github.com/oracle/oci-go-sdk/[email protected]
Run go mod tidy
In your project, you also need to ensure the import paths contain the correct major-version:
import "github.com/oracle/oci-go-sdk/v49/common" // or whatever major version you're using
To start working with the Go SDK, you import the service package, create a client, and then use that client to make calls.
Before using the SDK, set up a config file with the required credentials. See SDK and Tool Configuration for instructions.
Note that the Go SDK does not support profile inheritance or defining custom values in the configuration file.
Once a config file has been setup, call common.DefaultConfigProvider()
function as follows:
// Import necessary packages
import (
"github.com/oracle/oci-go-sdk/v49/common"
"github.com/oracle/oci-go-sdk/v49/identity" // Identity or any other service you wish to make requests to
)
//...
configProvider := common.DefaultConfigProvider()
Or, to configure the SDK programmatically instead, implement the ConfigurationProvider
interface shown below:
// ConfigurationProvider wraps information about the account owner
type ConfigurationProvider interface {
KeyProvider
TenancyOCID() (string, error)
UserOCID() (string, error)
KeyFingerprint() (string, error)
Region() (string, error)
// AuthType() is used for specify the needed auth type, like UserPrincipal, InstancePrincipal, etc. AuthConfig is used for getting auth related paras in config file.
AuthType() (AuthConfig, error)
}
Or simply use one of structs exposed by the oci-go-sdk
that already implement the above interface
To make a request to an Oracle Cloud Infrastructure service, create a client for the service and then use the client to call a function from the service.
- Creating a client: All packages provide a function to create clients, using the naming convention
New<ServiceName>ClientWithConfigurationProvider
, such asNewVirtualNetworkClientWithConfigurationProvider
orNewIdentityClientWithConfigurationProvider
. To create a new client, pass a struct that conforms to theConfigurationProvider
interface, or use theDefaultConfigProvider()
function in the common package.
For example:
config := common.DefaultConfigProvider()
client, err := identity.NewIdentityClientWithConfigurationProvider(config)
if err != nil {
panic(err)
}
- Making calls: After successfully creating a client, requests can now be made to the service. Generally all functions associated with an operation
accept
context.Context
and a struct that wraps all input parameters. The functions then return a response struct that contains the desired data, and an error struct that describes the error if an error occurs.
For example:
id := "your_group_id"
response, err := client.GetGroup(context.Background(), identity.GetGroupRequest{GroupId:&id})
if err != nil {
//Something happened
panic(err)
}
//Process the data in response struct
fmt.Println("Group's name is:", response.Name)
- Expect header: Some services specified "PUT/POST" requests add Expect 100-continue header by default, if it is not expected, please explicitly set the env var:
export OCI_GOSDK_USING_EXPECT_HEADER=FALSE
- Circuit Breaker: By default, circuit breaker feature is enabled, if it is not expected, please explicitly set the env var:
export OCI_SDK_DEFAULT_CIRCUITBREAKER_ENABLED=FALSE
- Cicuit Breaker: Circuit Breaker error message includes a set of previous failed responses. By default, the number of the failed responses is set to 5. It can be explicitly set using the env var:
export OCI_SDK_CIRCUITBREAKER_NUM_HISTORY_RESPONSE=<int value>
The oci-go-sdk
contains the following:
-
Service packages: All packages except
common
and any other package found insidecmd
. These packages represent the Oracle Cloud Infrastructure services supported by the Go SDK. Each package represents a service. These packages include methods to interact with the service, structs that model input and output parameters, and a client struct that acts as receiver for the above methods. -
Common package: Found in the
common
directory. The common package provides supporting functions and structs used by service packages. Includes HTTP request/response (de)serialization, request signing, JSON parsing, pointer to reference and other helper functions. Most of the functions in this package are meant to be used by the service packages. -
cmd: Internal tools used by the
oci-go-sdk
.
Examples can be found here
Full documentation can be found on the godocs site.
- The Issues page of this GitHub repository.
- Stack Overflow, use the oracle-cloud-infrastructure and oci-go-sdk tags in your post.
- Developer Tools of the Oracle Cloud forums.
- My Oracle Support.
This project welcomes contributions from the community. Before submitting a pull request, please review our contribution guide
Please consult the security guide for our responsible security vulnerability disclosure process
Copyright (c) 2016, 2023, Oracle and/or its affiliates. All rights reserved. This software is dual-licensed to you under the Universal Permissive License (UPL) 1.0 as shown at https://oss.oracle.com/licenses/upl or Apache License 2.0 as shown at http://www.apache.org/licenses/LICENSE-2.0. You may choose either license.
See LICENSE for more details.
See CHANGELOG.
You can find information on any known issues with the SDK here and under the Issues tab of this project's GitHub repository.
For Go versions below 1.17
- Install Testify with the command:
go get github.com/stretchr/testify
- Install gobreaker with the command:
go get github.com/sony/gobreaker
- Install flock with the command:
go get github.com/gofrs/flock
- Install go lint with the command:
go get -u golang.org/x/lint/golint
For Go versions 1.17 and above
- Install Testify with the command:
go install github.com/stretchr/testify
- Install gobreaker with the command:
go install github.com/sony/gobreaker
- Install flock with the command:
go install github.com/gofrs/flock
- Install go lint with the command:
go install github.com/golang/lint/golint
- Install staticcheck with the command:
go install honnef.co/go/tools/cmd/[email protected]
Linting (performed by golint) can be done with the following command:
make lint
Linting will perform a number of formatting changes across the code base.
make static-check
This command is also run by the make build and make test commands. Staticcheck will provide formatting warnings but will not make any changes to any files. You can also cause staticcheck to be run before calls to "git commit" with the pre-commit plugin.
pre-commit install
You can install pre-commit itself, you can use your package manager of choice, such as
brew install pre-commit
Building is provided by the make file at the root of the project. To build the project execute.
make build
To run the tests:
make test