The service allow controlling gateway LEDs, button, and illuminance sensor over MQTT

Default config should be located in /etc/lumimqtt.json or can be overridden with LUMIMQTT_CONFIG environment variable.

Example run command:

LUMIMQTT_CONFIG=./lumimqtt.json python3 -m lumimqtt

The configuration file is a JSON with the following content:

{
    "mqtt_host": "localhost",
    "mqtt_port": 1883,
    "mqtt_user": "",
    "mqtt_password": "",
    "topic_root": "lumi/{device_id}",
    "auto_discovery": true,
    "sensor_retain": false,
    "sensor_threshold": 50,
    "sensor_debounce_period": 60,
    "light_transition_period": 1.0
}

Every line is optional. By default, LumiMQTT will use the connection to localhost with the anonymous login.

device_id if not provided will be automatically replaced by a hex number representing a MAC address of the first network interface.

auto_discovery set to false to disable creating autodiscovery topics that are user by Home Assistant to discover entities.

sensor_retain is option to enable storing last sensor value on the broker

sensor_threshold is a threshold to avoid sending data to MQTT on small changes

sensor_debounce_period value in seconds to send data despite the threshold

light_transition_period value in seconds to set default transition for light switching or light change. Use 0 to remove the transition.

To use SSL connection, you need to set mqtt_cert and mqtt_key, and optional mqtt_ca with corresponding paths to files.

You can also use GPIO(s) as binary sensor(s). Add this to configuration:

{
    <your configuration>,
    "binary_sensors": {
        "<sensor name>": {
            "gpio": "<gpio number>",
            "device_class": "<device class>",
            "topic": "<sensor name>"
        }
    }
}

Values in <> must be replaced.

gpio is required, device_class and topic are optional. By default topic is sensor's name.

List of GPIOs. List of device classes.

You can add an extra section with custom commands that are executed with mqtt topics. Every command is exported as a switch entity in Home Assistant. If json is passed to the set topic, the command will be interpolated with the values. Plain text is passed as {text} variable

{
    <your configuration>,
    "custom_commands": {
      "blink": "for i in 0 255 0 255 0 255 0; do echo $i > /sys/class/leds/{color}/brightness; sleep 1; done",
      "tts": "echo \"Test TTS without MPD component for home assistant\" | python3 -c 'from urllib.parse import quote_plus;from sys import stdin;print(\"wget -O /tmp/tts.mp3 -U Mozilla \\\"http://translate.google.com/translate_tts?q=\" quote_plus(stdin.read()[:100]) \"&ie=UTF-8&tl=en&total=1&idx=0&client=tw-ob&prev=input&ttsspeed=1\\\" && amixer set Master 200 && mpg123 /tmp/tts.mp3\")' | sh 2> /dev/null",
      "tts_interpolate": "echo \"{text}\" | python3 -c 'from urllib.parse import quote_plus;from sys import stdin;print(\"wget -O /tmp/tts.mp3 -U Mozilla \\\"http://translate.google.com/translate_tts?q=\" quote_plus(stdin.read()[:100]) \"&ie=UTF-8&tl=en&total=1&idx=0&client=tw-ob&prev=input&ttsspeed=1\\\" && amixer set Master {volume} && mpg123 /tmp/tts.mp3\")' | sh 2> /dev/null",
      "restart_lumimqtt": "/etc/init.d/lumimqtt restart",
      "reboot": "/sbin/reboot"
    }
}

opkg update 
opkg install python3-pip python3-asyncio python3-evdev
pip3 install -U lumimqtt

To upgrade you can just run

pip3 install -U lumimqtt

lumimqtt

lumimqtt &

To run lumimqtt on start you need a file /etc/init.d/lumimqtt with the following content:

#!/bin/sh /etc/rc.common
START=98
USE_PROCD=1
start_service()
{
    procd_open_instance

    procd_set_param env LUMIMQTT_CONFIG=/etc/lumimqtt.json
    procd_set_param command lumimqtt
    procd_set_param respawn
    procd_set_param stdout 1
    procd_set_param stderr 1
    procd_close_instance
}

To install this file on the gateway you can run

wget https://raw.githubusercontent.com/openlumi/lumimqtt/main/init.d/lumimqtt -O /etc/init.d/lumimqtt
chmod  x /etc/init.d/lumimqtt
/etc/init.d/lumimqtt enable
/etc/init.d/lumimqtt start