This is a Micropython Library for RaspberryPi-Pico to communicate with ESP8266 using AT command.
This is a basic AT Command library for RaspberryPi-Pico, which simplifies the communication process with the ESP8266. The best way to understand the library is with the example shown below, This example shows you how to make a GET/POST request using ESP8266 with the help of the RaspberryPi-Pico.
from machine import Pin
from esp8266 import ESP8266
import time, sys
print("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~")
print("RPi-Pico MicroPython Ver:", sys.version)
print("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~")
## Create On-board Led object
led=Pin(25,Pin.OUT)
## Create an ESP8266 Object
esp01 = ESP8266()
esp8266_at_ver = None
print("StartUP",esp01.startUP())
print("Echo-Off",esp01.echoING())
print("\r\n")
'''
Print ESP8266 AT comand version and SDK details
'''
esp8266_at_ver = esp01.getVersion()
if(esp8266_at_ver != None):
print(esp8266_at_ver)
'''
set the current WiFi in SoftAP STA
'''
print("WiFi Current Mode:",esp01.setCurrentWiFiMode()
print("\r\n\r\n")
'''
Connect with the WiFi
'''
print("Try to connect with the WiFi..")
while (1):
if "WIFI CONNECTED" in esp01.connectWiFi("ssid","pwd"):
print("ESP8266 connect with the WiFi..")
break;
else:
print(".")
time.sleep(2)
print("\r\n\r\n")
print("Now it's time to start HTTP Get/Post Operation.......\r\n")
while(1):
led.toggle()
time.sleep(1)
'''
Going to do HTTP Get Operation with www.httpbin.org/ip, It return the IP address of the connected device
'''
httpCode, httpRes = esp01.doHttpGet("www.httpbin.org","/ip","RaspberryPi-Pico", port=80)
print("------------- www.httpbin.org/ip Get Operation Result -----------------------")
print("HTTP Code:",httpCode)
print("HTTP Response:",httpRes)
print("-----------------------------------------------------------------------------\r\n\r\n")
'''
Going to do HTTP Post Operation with www.httpbin.org/post
'''
post_json="{\"name\":\"Noyel\"}"
httpCode, httpRes = esp01.doHttpPost("www.httpbin.org","/post","RPi-Pico", "application/json",post_json,port=80)
print("------------- www.httpbin.org/post Post Operation Result -----------------------")
print("HTTP Code:",httpCode)
print("HTTP Response:",httpRes)
print("--------------------------------------------------------------------------------\r\n\r\n")
You are very welcome to contribute: stability bugfixes, new hardware support, or any other improvements. Please.
This project is released under The MIT License (MIT) © Noyel Seth