apt-get source vim

sudo apt-get install libncurses5-dev

$ ./configure --prefix=/usr --sysconfdir=/etc --enable-tclinterp --enable-pythoninterp=yes --enable-perlinterp=yes --enable-rubyinterp=yes --enable-cscope --enable-multibyte --enable-xim --enable-gtk2-check --enable-fontset --with-x

$ make
$ sudo make install

term         黑白终端的属性  
cterm        彩色终端的属性  
ctermfg      彩色终端前景色  
ctermbg      彩色终端背景色  
gui          GUI属性  
guifg        GUI前景色  
guibg        GUI背景色  

* 由于不是所有终端都支持256色，因此使用一些安全色会使我们的主题更有移植性，而GUI可以支持所有颜色，不在考虑范围之内，vim文档给出的安全色如下：

"0      Black    
"1      DarkBlue    
"2      DarkGreen          
"3      DarkCyan   
"4      DarkRed  
"5      DarkMagenta          
"6      Brown, DarkYellow              
"7      LightGray, LightGrey, Gray, Grey                     
"8      DarkGray, DarkGrey     
"9      Blue, LightBlue       
"10     Green, LightGreen            
"11     Cyan, LightCyan                      
"12     Red, LightRed                           
"13     Magenta, LightMagenta   
"14     Yellow, LightYellow     
"15     White       

* 配色语法

hi Type             ctermfg=LightYellow     ctermbg=Black           cterm=bold

PS : hi是highlight命令的缩写，用于高亮配置；Type是要配色的元素名称，如：StatusLine | ModeMsg ；参数采用的是Key=Value的形式。

map <C-l> :tabn<cr>             " 下一个tab
map <C-h> :tabp<cr>             " 上一个tab
map <C-n> :tabnew<cr>           " 新tab
map <C-k> :bn<cr>               " 下一个文件
map <C-j> :bp<cr>               " 上一个文件

let g:nerdtree_tabs_open_on_console_startup=1       	" 设置打开vim的时候默认打开目录树
map <F3> :NERDTreeTabsToggle <CR>         		" 设置打开目录树的快捷键
imap <F3> :NERDTreeTabsToggle <CR>         		" 设置关闭目录树的快捷键

set helplang=cn			" setting zh_cn
set helplang=en			" setting en_us
set encoding=utf-8

set tags=tags  		" 设置tags  
set autochdir 

nnoremap <silent> <F8> :TlistToggle<CR><CR>	" 按F8按钮，在窗口的左侧出现taglist的窗口, 像vc的左侧的workpace
" :Tlist              				" 调用TagList
let Tlist_Auto_Open=0 				" 默认打开Taglist 
let Tlist_Ctags_Cmd = '/usr/bin/ctags'  
let Tlist_Show_One_File=1                    	" 只显示当前文件的tags
let Tlist_Exit_OnlyWindow=1                  	" 如果Taglist窗口是最后一个窗口则退出Vim
let Tlist_Use_Right_Window=1                 	" 在右侧窗口中显示taglist窗口
let Tlist_File_Fold_Auto_Close=1             	" 自动折叠

map <F6> :BufExplorer<CR>

let g:miniBufExplModSelTarget = 1
let g:miniBufExplorerMoreThanOne = 2
let g:miniBufExplUseSingleClick = 1
let g:miniBufExplMapWindowNavVim = 1
let g:miniBufExplVSplit = 25
let g:miniBufExplSplitBelow=1

let g:bufExplorerSortBy = "name"

let g:miniBufExplMapWindowNavArrows = 1
let g:miniBufExplMapCTabSwitchBufs = 1
let g:miniBufExplModSelTarget = 1 

autocmd BufRead,BufNew :call UMiniBufExplorer

map <leader>u :TMiniBufExplorer<cr>

hi MBEChanged guibg=darkblue ctermbg=darkblue 
"" termbg=darkblue

"Pressing ,ss will toggle and untoggle spell checking
map <leader>ss :setlocal spell!<cr>

"Shortcuts using <leader>
map <leader>sn ]s
map <leader>sp [s
map <leader>sa zg
map <leader>s? z=

	* Linux/Unix系统：将python_pydiction.vim文件复制到 ~/.vim/after/ftplugin 目录下。如果该目录不存在，则创建它，vim会自动在此目录下搜索。

　　	* Windows系统：将python_pydiction.vim文件复制到 C:\vim\vimfiles\ftplugin 目录下（假设你的Vim安装路径为C:\vim）

　　	* 除此之外的另两个文件complete-dict和pydiction.py可以放置到任何你想放置的位置，但在ftplugin目录下最好只存放python_pydiction.vim而不应该还有其他文件。
	进入解压后的pydiction目录

	$ cp after/ftplugin/python_pydiction.vim ~/.vim/after/ftplugin
	$ cp complete-dict ~/.vim
	$ cp pydiction.py ~/.vim
	
	* 解决tab键冲突问题：
		* Pydiction tab键修改：
		sudo ~/.vim/bundle/Pydiction/after/ftplugin/python_pydiction.vim 找到这行
		inoremap <silent> <buffer> <TAB>
		修改为下面这样，就可以通过Ctrl p来进行补全了。
		inoremap <silent> <buffer> <C-y>
		inoremap <silent> <buffer> <S-TAB>换成
		inoremap <silent> <buffer> <C-S-y>

"pydiction 1.2 python auto complete
filetype plugin on
let g:pydiction_location = '~/.vim/tools/pydiction/complete-dict'
"defalut g:pydiction_menu_height == 15
"let g:pydiction_menu_height = 20 

let g:neocomplcache_enable_at_startup = 1

set showtabline=2 	" set tab page height 
set guitablabel=%t

map t :TaskList<CR>

if has("cscope")
    """"""""""""" Standard cscope/vim boilerplate

    " use both cscope and ctag for 'ctrl-]', ':ta', and 'vim -t'
    set cscopetag

    " check cscope for definition of a symbol before checking ctags: set to 1
    " if you want the reverse search order.
    set csto=0

    " add any cscope database in current directory
    "if filereadable("cscope.out")
     "   cs add cscope.out  
    " else add the database pointed to by environment variable 
    "elseif $CSCOPE_DB != ""
     "   cs add $CSCOPE_DB
    "endif

    " show msg when any other cscope db added
    set cscopeverbose  


    """"""""""""" My cscope/vim key mappings
    "
    " The following maps all invoke one of the following cscope search types:
    "
    "   's'   symbol: find all references to the token under cursor
    "   'g'   global: find global definition(s) of the token under cursor
    "   'c'   calls:  find all calls to the function name under cursor
    "   't'   text:   find all instances of the text under cursor
    "   'e'   egrep:  egrep search for the word under cursor
    "   'f'   file:   open the filename under cursor
    "   'i'   includes: find files that include the filename under cursor
    "   'd'   called: find functions that function under cursor calls
    "
    " Below are three sets of the maps: one set that just jumps to your
    " search result, one that splits the existing vim window horizontally and
    " diplays your search result in the new window, and one that does the same
    " thing, but does a vertical split instead (vim 6 only).
    "
    " I've used CTRL-\ and CTRL-@ as the starting keys for these maps, as it's
    " unlikely that you need their default mappings (CTRL-\'s default use is
    " as part of CTRL-\ CTRL-N typemap, which basically just does the same
    " thing as hitting 'escape': CTRL-@ doesn't seem to have any default use).
    " If you don't like using 'CTRL-@' or CTRL-\, , you can change some or all
    " of these maps to use other keys.  One likely candidate is 'CTRL-_'
    " (which also maps to CTRL-/, which is easier to type).  By default it is
    " used to switch between Hebrew and English keyboard mode.
    "
    " All of the maps involving the <cfile> macro use '^<cfile>$': this is so
    " that searches over '#include <time.h>" return only references to
    " 'time.h', and not 'sys/time.h', etc. (by default cscope will return all
    " files that contain 'time.h' as part of their name).


    " To do the first type of search, hit 'CTRL-\', followed by one of the
    " cscope search types above (s,g,c,t,e,f,i,d).  The result of your cscope
    " search will be displayed in the current window.  You can use CTRL-T to
    " go back to where you were before the search.  
    "

    nmap <C-\>s :cs find s <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>g :cs find g <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>c :cs find c <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>t :cs find t <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>e :cs find e <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>f :cs find f <C-R>=expand("<cfile>")<CR><CR>	
    nmap <C-\>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
    nmap <C-\>d :cs find d <C-R>=expand("<cword>")<CR><CR>	


    " Using 'CTRL-spacebar' (intepreted as CTRL-@ by vim) then a search type
    " makes the vim window split horizontally, with search result displayed in
    " the new window.
    "
    " (Note: earlier versions of vim may not have the :scs command, but it
    " can be simulated roughly via:
    "    nmap <C-@>s <C-W><C-S> :cs find s <C-R>=expand("<cword>")<CR><CR>	

    nmap <C-@>s :scs find s <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>g :scs find g <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>c :scs find c <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>t :scs find t <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>e :scs find e <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>f :scs find f <C-R>=expand("<cfile>")<CR><CR>	
    nmap <C-@>i :scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>	
    nmap <C-@>d :scs find d <C-R>=expand("<cword>")<CR><CR>	


    " Hitting CTRL-space *twice* before the search type does a vertical 
    " split instead of a horizontal one (vim 6 and up only)
    "
    " (Note: you may wish to put a 'set splitright' in your .vimrc
    " if you prefer the new window on the right instead of the left

    nmap <C-@><C-@>s :vert scs find s <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>g :vert scs find g <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>c :vert scs find c <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>t :vert scs find t <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>e :vert scs find e <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>f :vert scs find f <C-R>=expand("<cfile>")<CR><CR>	
    nmap <C-@><C-@>i :vert scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>	
    nmap <C-@><C-@>d :vert scs find d <C-R>=expand("<cword>")<CR><CR>


    """"""""""""" key map timeouts
    "
    " By default Vim will only wait 1 second for each keystroke in a mapping.
    " You may find that too short with the above typemaps.  If so, you should
    " either turn off mapping timeouts via 'notimeout'.
    "
    "set notimeout 
    "
    " Or, you can keep timeouts, by uncommenting the timeoutlen line below,
    " with your own personal favorite value (in milliseconds):
    "
    "set timeoutlen=4000
    "
    " Either way, since mapping timeout settings by default also set the
    " timeouts for multicharacter 'keys codes' (like <F1>), you should also
    " set ttimeout and ttimeoutlen: otherwise, you will experience strange
    " delays as vim waits for a keystroke after you hit ESC (it will be
    " waiting to see if the ESC is actually part of a key code like <F1>).
    "
    "set ttimeout 
    "
    " personally, I find a tenth of a second to work well for key code
    " timeouts. If you experience problems and have a slow terminal or network
    " connection, set it higher.  If you don't set ttimeoutlen, the value for
    " timeoutlent (default: 1000 = 1 second, which is sluggish) is used.
    "
    "set ttimeoutlen=100
    
    " cscope.out config file dir added .
    " cs add /home/kylin/cscope.out /home/kylin/
    
endif