This repository contains a controller that allows you to operate a Varnish cache on Kubernetes.
quay.io/spaces/kube-httpcache to quay.io/mittwald/kube-httpcache. The old image will remain available (for the time being), but only the new image name will receive any updates. Please remember to adjust the image name when upgrading.
- How it works
- High-Availability mode
- Getting started
- Detailed how-tos
- Helm Chart installation
- Developer notes
This controller is not intended to be a replacement of a regular ingress controller. Instead, it is intended to be used between your regular Ingress controller and your application's service.
┌─────────┐ ┌─────────┐ ┌─────────────┐
| Ingress | ----> | Varnish | ----> | Application |
└─────────┘ └─────────┘ └─────────────┘
The Varnish controller needs the following prerequisites to run:
- A Go-template that will be used to generate a VCL configuration file
- An application Kubernetes service that will be used as backend for the Varnish controller
- A Varnish Kubernetes service that will be used as frontend for the Varnish controller
- If RBAC is enabled in your cluster, you'll need a ServiceAccount with a role that grants
WATCHaccess to theendpointsresource in the respective namespace
After starting, the Varnish controller will watch the configured Varnish service's endpoints and application service's endpoints; on startup and whenever these change, it will use the supplied VCL template to generate a new Varnish configuration and load this configuration at runtime.
The controller does not ship with any preconfigured configuration; the upstream connection and advanced features like load balancing are possible, but need to be configured in the VCL template supplied by you.
It can run in high avalability mode using multiple Varnish and application pods.
┌─────────┐
│ Ingress │
└────┬────┘
|
┌────┴────┐
│ Service │
└───┬┬────┘
┌───┘└───┐
┌────────────┴──┐ ┌──┴────────────┐
│ Varnish 1 ├──┤ Varnish 2 │
│ Signaller 1 ├──┤ Signaller 2 │
└─────────┬┬────┘ └────┬┬─────────┘
│└─────┌──────┘│
│┌─────┘└─────┐│
┌─────────┴┴────┐ ┌────┴┴─────────┐
│ Application 1 │ | Application 2 │
└───────────────┘ └───────────────┘
The Signaller component supports broadcasting PURGE and BAN requests to all Varnish nodes.
ConfigMap) may still be subject to change. Future implementations might for example use a Kubernetes Custom Resource for the entire configuration set.
Start by creating a ConfigMap that contains a VCL template:
apiVersion: v1
kind: ConfigMap
metadata:
name: vcl-template
data:
default.vcl.tmpl: |
vcl 4.0;
import std;
import directors;
// ".Frontends" is a slice that contains all known Varnish instances
// (as selected by the service specified by -frontend-service).
// The backend name needs to be the Pod name, since this value is compared
// to the server identity ("server.identity" [1]) later.
//
// [1]: https://varnish-cache.org/docs/6.4/reference/vcl.html#local-server-remote-and-client
{{ range .Frontends }}
backend {{ .Name }} {
.host = "{{ .Host }}";
.port = "{{ .Port }}";
}
{{- end }}
backend fe-primary {
.host = "{{ .PrimaryFrontend.Host }}";
.port = "{{ .PrimaryFrontend.Port }}";
}
{{ range .Backends }}
backend be-{{ .Name }} {
.host = "{{ .Host }}";
.port = "{{ .Port }}";
}
{{- end }}
backend be-primary {
.host = "{{ .PrimaryBackend.Host }}";
.port = "{{ .PrimaryBackend.Port }}";
}
acl purgers {
"127.0.0.1";
"localhost";
"::1";
{{- range .Frontends }}
"{{ .Host }}";
{{- end }}
{{- range .Backends }}
"{{ .Host }}";
{{- end }}
}
sub vcl_init {
new cluster = directors.hash();
{{ range .Frontends -}}
cluster.add_backend({{ .Name }}, 1);
{{ end }}
new lb = directors.round_robin();
{{ range .Backends -}}
lb.add_backend(be-{{ .Name }});
{{ end }}
}
sub vcl_recv
{
# Set backend hint for non cachable objects.
set req.backend_hint = lb.backend();
# ...
# Routing logic. Pass a request to an appropriate Varnish node.
# See https://info.varnish-software.com/blog/creating-self-routing-varnish-cluster for more info.
unset req.http.x-cache;
set req.backend_hint = cluster.backend(req.url);
set req.http.x-shard = req.backend_hint;
if (req.http.x-shard != server.identity) {
return(pass);
}
set req.backend_hint = lb.backend();
# ...
return(hash);
}
# ...Environment variables can be used from the template. {{ .Env.ENVVAR }} is replaced with the
environment variable value. This can be used to set for example the Host-header for the external
service.
Create a Secret object that contains the secret for the Varnish administration port:
$ kubectl create secret generic varnish-secret --from-literal=secret=$(head -c32 /dev/urandom | base64)
If RBAC is enabled in your cluster, you will need to create a ServiceAccount with a respective Role.
$ kubectl create serviceaccount kube-httpcache
$ kubectl apply -f https://raw.githubusercontent.com/mittwald/kube-httpcache/master/deploy/kubernetes/rbac.yaml
$ kubectl create rolebinding kube-httpcache --clusterrole=kube-httpcache --serviceaccount=kube-httpcache
-
Create a
StatefulSetfor the Varnish controller:apiVersion: apps/v1 kind: StatefulSet metadata: name: cache-statefulset labels: app: cache spec: serviceName: cache-service replicas: 2 updateStrategy: type: RollingUpdate selector: matchLabels: app: cache template: metadata: labels: app: cache spec: containers: - name: cache image: quay.io/mittwald/kube-httpcache:stable imagePullPolicy: Always args: - -admin-addr=0.0.0.0 - -admin-port=6083 - -signaller-enable - -signaller-port=8090 - -frontend-watch - -frontend-namespace=$(NAMESPACE) - -frontend-service=frontend-service - -frontend-port=8080 - -backend-watch - -backend-namespace=$(NAMESPACE) - -backend-service=backend-service - -varnish-secret-file=/etc/varnish/k8s-secret/secret - -varnish-vcl-template=/etc/varnish/tmpl/default.vcl.tmpl - -varnish-storage=malloc,128M env: - name: NAMESPACE valueFrom: fieldRef: fieldPath: metadata.namespace volumeMounts: - name: template mountPath: /etc/varnish/tmpl - name: secret mountPath: /etc/varnish/k8s-secret ports: - containerPort: 8080 name: http - containerPort: 8090 name: signaller serviceAccountName: kube-httpcache # when using RBAC restartPolicy: Always volumes: - name: template configMap: name: vcl-template - name: secret secret: secretName: varnish-secret
NOTE: Using a
StatefulSetis particularly important when using a stateful, self-routed Varnish cluster. Otherwise, you could also use aDeploymentresource, instead. -
Create a service for the Varnish controller:
apiVersion: v1 kind: Service metadata: name: cache-service labels: app: cache spec: ports: - name: "http" port: 80 targetPort: http - name: "signaller" port: 8090 targetPort: signaller selector: app: cache
-
Create an
Ingressto forward requests to cache service. Typically, you should only need an Ingress for the Serviceshttpport, and not for thesignallerport (if for some reason you do, make sure to implement proper access controls)
Logging uses glog.
Detailed logging e.g. for troubleshooting can be activated by passing command line parameter -v7 (where 7 is requested logging level).
The signaller component is responsible for broadcasting HTTP requests to all nodes of a Varnish cluster. This is useful in HA cluster setups, when BAN or PURGE requests should be broadcast across the entire cluster.
To broadcast a BAN or PURGE request to all Varnish endpoints, run one of the following commands, respectively:
$ curl -H "X-Url: /path" -X BAN http://cache-service:8090
$ curl -H "X-Host: www.example.com" -X PURGE http://cache-service:8090/path
When running from outside the cluster, you can use kubectl port-forward to forward the signaller port to your local machine (and then send your requests to http://localhost:8090):
$ kubectl port-forward service/cache-service 8090:8090
NOTE: Specific headers for PURGE/BAN requests depend on your Varnish configuration. E.g. X-Host header is set for convenience, because signaller is listening on other URL than Varnish. However, you need to support such headers in your VCL.
sub vcl_recv {
# ...
# Purge logic
if (req.method == "PURGE") {
if (client.ip !~ purgers) {
return (synth(403, "Not allowed."));
}
if (req.http.X-Host) {
set req.http.host = req.http.X-Host;
}
return (purge);
}
# Ban logic
if (req.method == "BAN") {
if (client.ip !~ purgers) {
return (synth(403, "Not allowed."));
}
if (req.http.Cache-Tags) {
ban("obj.http.Cache-Tags ~ " req.http.Cache-Tags);
return (synth(200, "Ban added " req.http.host));
}
if (req.http.X-Url) {
ban("obj.http.X-Url == " req.http.X-Url);
return (synth(200, "Ban added " req.http.host));
}
return (synth(403, "Cache-Tags or X-Url header missing."));
}
# ...
}NOTE: Native support for ExternalName services is a requested feature. Have a look at #39 if you're willing to help out.
In some cases, you might want to cache content from a cluster-external resource. In this case, create a new Kubernetes service of type ExternalName for your backend:
apiVersion: v1
kind: Service
metadata:
name: external-service
namespace: default
spec:
type: ExternalName
externalName: external-service.exampleIn your VCL template, you can then simply use this service as static backend (since there are no dynamic endpoints, you do not need to iterate over .Backends in your VCL template):
kind: ConfigMap
apiVersion: v1
metadata: # [...]
data:
default.vcl.tmpl: |
vcl 4.0;
{{ range .Frontends }}
backend {{ .Name }} {
.host = "{{ .Host }}";
.port = "{{ .Port }}";
}
{{- end }}
backend backend {
.host = "external-service.svc";
}
// ...When starting kube-httpcache, remember to set the --backend-watch=false flag to disable watching the (non-existent) backend endpoints.
You can use the Helm chart to rollout an instance of kube-httpcache:
$ helm repo add mittwald https://helm.mittwald.de
$ helm install -f your-values.yaml kube-httpcache mittwald/kube-httpcache
For possible values, have a look at the comments in the provided values.yaml file. Take special note that you'll most likely have to overwrite the vclTemplate value with your own VCL configuration file.
Ensure your defined backend services have a port named http:
apiVersion: v1
kind: Service
metadata:
name: backend-service
spec:
ports:
- name: http
port: 80
protocol: TCP
targetPort: 8080
type: ClusterIP
An ingress points to the kube-httpcache service which cached your backend service:
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
name: example-ingress
spec:
rules:
- host: www.example.com
http:
paths:
- backend:
service:
name: kube-httpcache
port:
number: 80
path: /
pathType: Prefix
Look at the vclTemplate property in chart/values.yaml to define
your own Varnish cluster rules or load with extraVolume an extra file
as initContainer if your ruleset is really big.
A Dockerfile for building the container image yourself is located in build/package/docker. Invoke docker build as follows:
$ docker build -t $IMAGE_NAME -f build/package/docker/Dockerfile .