//#pragma GCC diagnostic error "-Wconversion"

/*

HABalloon by KD2NDR, Miami Florida October 25 2018

Improvements by YO3ICT, Bucharest Romania, April-May 2019

Improvements By SA6BSS, Sweden, fall 2020

You may use and modify the following code to suit

your needs so long as it remains open source

and it is for non-commercial use only.

*/

#include <Sodaq_wdt.h>

#include <si5351.h>

#include <JTEncode.h>

#include <TimeLib.h>

#include <TinyGPS .h>

#include <avr/power.h>

#define WSPR_CTC 1334 // CTC value for WSPR - 10672 @ 16Mhz //5336 @ 8Mhz //2668 @ 4Mhz //1334 @ 2Mhz //667 @ 1Mhz

#define WSPR_TONE_SPACING 146 // 146 ~1.46 Hz

//#define WSPR_FREQ 7040185UL

//#define WSPR_FREQ 10140285UL

#define WSPR_FREQ 14097192UL // <<<<< SET TX FREQUENCY HERE

// Enumerations

enum mode {MODE_WSPR};

TinyGPSPlus gps;

Si5351 si5351;

JTEncode jtencode;

// Global variables

unsigned long freq;

char call[] = "SA7BSS"; // WSPR Standard callsign

char call_telemetry[7]; // WSPR telemetry callsign

char loc_telemetry[5]; // WSPR telemetry locator

uint8_t dbm_telemetry; // WSPR telemetry dbm

char loc4[5]; // 4 digit gridsquare locator

byte Hour, Minute, Second; // Used for timing

long lat, lon, oldlat, oldlon; // Used for location

uint8_t tx_buffer[255]; // WSPR Tx buffer

uint8_t symbol_count; // JTencode

uint16_t tone_delay, tone_spacing; // JTencode

int alt_meters = 0;

bool telemetry_set = false;

int Sats = 0;

int gps_speed = 0;

volatile bool proceed = false;

#include "TelemFunctions.h" // Various telemetry functions

#include "Timing2.h" // Scheduling

ISR(TIMER1_COMPA_vect)

{ proceed = true; }

void setup()

}

void loop()

}