15_day/timer.c

/* 定时器 */

#include "bootpack.h"

#define PIT_CTRL	0x0043
#define PIT_CNT0	0x0040

struct TIMERCTL timerctl;

#define TIMER_FLAGS_ALLOC 1 /* 已配置状态 */
#define TIMER_FLAGS_USING 2 /* 定时器运行中 */

void init_pit(void)
{
	int i;
	struct TIMER *t;
	io_out8(PIT_CTRL, 0x34);
	io_out8(PIT_CNT0, 0x9c);
	io_out8(PIT_CNT0, 0x2e);
	timerctl.count = 0;
	for (i = 0; i < MAX_TIMER; i  ) {
		timerctl.timers0[i].flags = 0; /* 没有使用 */
	}
	t = timer_alloc(); /* 取得一个 */
	t->timeout = 0xffffffff;
	t->flags = TIMER_FLAGS_USING;
	t->next = 0; /* 末尾 */
	timerctl.t0 = t; /* 因为现在只有哨兵，所以他就在最前面*/
	timerctl.next = 0xffffffff; /* 因为只有哨兵，所以下一个超时时刻就是哨兵的时刻 */
	return;
}

struct TIMER *timer_alloc(void)
{
	int i;
	for (i = 0; i < MAX_TIMER; i  ) {
		if (timerctl.timers0[i].flags == 0) {
			timerctl.timers0[i].flags = TIMER_FLAGS_ALLOC;
			return &timerctl.timers0[i];
		}
	}
	return 0; /* 没找到 */
}

void timer_free(struct TIMER *timer)
{
	timer->flags = 0; /* 未使用 */
	return;
}

void timer_init(struct TIMER *timer, struct FIFO32 *fifo, int data)
{
	timer->fifo = fifo;
	timer->data = data;
	return;
}

void timer_settime(struct TIMER *timer, unsigned int timeout)
{
	int e;
	struct TIMER *t, *s;
	timer->timeout = timeout   timerctl.count;
	timer->flags = TIMER_FLAGS_USING;
	e = io_load_eflags();
	io_cli();
	t = timerctl.t0;
	if (timer->timeout <= t->timeout) {
	/* 插入最前面的情况 */
		timerctl.t0 = timer;
		timer->next = t; /* 下面是设定t */
		timerctl.next = timer->timeout;
		io_store_eflags(e);
		return;
	}
	for (;;) {
		s = t;
		t = t->next;
		if (timer->timeout <= t->timeout) {
		/* 插入s和t之间的情况 */
			s->next = timer; /* s下一个是timer */
			timer->next = t; /* timer的下一个是t */
			io_store_eflags(e);
			return;
		}
	}
}

void inthandler20(int *esp)
{
	struct TIMER *timer;
	char ts = 0;
	io_out8(PIC0_OCW2, 0x60); /* 把IRQ-00接收信号结束的信息通知给PIC */
	timerctl.count  ;
	if (timerctl.next > timerctl.count) {
		return;
	}
	timer = timerctl.t0; /* 首先把最前面的地址赋给timer */
	for (;;) {
	/* 因为timers的定时器都处于运行状态，所以不确认flags */
		if (timer->timeout > timerctl.count) {
			break;
		}
		/* 超时 */
		timer->flags = TIMER_FLAGS_ALLOC;
		if (timer != mt_timer) {
			fifo32_put(timer->fifo, timer->data);
		} else {
			ts = 1; /* mt_timer超时*/
		}
		timer = timer->next; /* 将下一个定时器的地址赋给timer*/
	}
	timerctl.t0 = timer;
	timerctl.next = timer->timeout;
	if (ts != 0) {
		mt_taskswitch();
	}
	return;
}