-
Clone the esp-homekit-demo project (if that's what you use to build your sensor)
git clone https://github.com/maximkulkin/esp-homekit-demo.git -
Go into directory & update :
cd esp-homekit-demo git submodule update --init --recursive -
Change the Wifi credentials for yours :
cp wifi.h.sample wifi.h sed -i 's/mywifi/'"MY_WIFI_SSID"'/g' wifi.h sed -i 's/mypassword/'"MY_WIFI_PASSWORD"'/g' wifi.h -
Build your project using this Docker image from one of the approach below :
-
Still from the source directory ./esp-homekit-demo, or change the path of volume below instead of $(pwd):
docker run -v $(pwd):/src --rm mach5even/esp-homekit make -C /src/examples/temperature_sensor -
Your output binary should now be in (on your host machine) :
- ./examples/temperature_sensor/firmware
- If you wish to flash directly from the container after build, use (assuming your USB device is /dev/tty.wchusbserial1440) :
docker run -v $(pwd):/src --device=/dev/tty.wchusbserial1440 -e ESPPORT=/dev/tty.wchusbserial1440 --rm mach5even/esp-homekit make -C /src/examples/temperature_sensor