Skip to content

luamfb/intro_x86-64

Repository files navigation

What is this?

An introduction to x86 64-bit assembly, with thoroughly commented code, and exercises at the end of each file.

Why?

Because most entry-level assembly code is 32-bit, yet most processors nowadays are 64-bit. Also, information about assembly in general seems scarce.

But why learn assembly?

When I started learning C, I had a mental diagram that went

graph LR
subgraph black magic
f(foo.c) -- compiler --> p(program)
end
Loading

As I learned, this diagram was updated until it became something like this:

graph LR
c1(foo1.c) -- preprocessor --> pp1(foo1.i)
c2(foo2.c) --> pp2(foo2.i)
cN(fooN.c) --> ppN(fooN.i)
subgraph black magic 
pp1 -- compiler --> o1(foo1.o)
pp2 --> o2(foo2.o)
ppN --> oN(fooN.o)
dl(dynamic libraries) -- linker, runtime --> p
sl(static libraries) -- linker --> p{program}
o1 -- linker --> p
o2 --> p
oN --> p
end
Loading

There's still an awful lot of black magic in that. (The preprocessor was the only thing I actually understood, because it's just text substitution.)
It felt like the Wise Ones, from the top of Mount Turing, had granted us, lowly apprentices, the all-mighty Compiler, so we could play around with our silly programming languages and pretend we're like Them...
"How can I call myself a programmer if I don't understand the tool I use most often?" I wondered. So I decided to study how the compiler works, and that's what led me to assembly.

There are plenty of other reasons to learn it, though. You'll need to know assembly to:

  • Deal with executables directly, which may be needed if you don't have the source code:

    • Binary patches, i.e. changing the program directly
    • Reverse engineering, i.e. retrieving source code from an exectuable
    • Malware analysis, i.e. deciding whether a program is malware or not
  • Implement some performance-critical systems, which use assembly to squeeze every bit (pun intended) of performance out of the CPU

  • Believe it or not, debugging. In some cases where you don't have a clue why your program is behaving the way it is, looking at the assembly code generated can tell what the program is actually doing.

What is assembly?

Your CPU doesn't understand C, Python, Javascript, or whatever programming language you're used to. What does it understand, then? There must be some set of basic operations which are understood directly by the processor, and which are Turing complete, otherwise Turing complete languages wouldn't be able to run on it.
Indeed, those basic operations are called instructions, and they're encoded by a bunch of bytes meant to be fed directly to the processor. For instance:

	48 89 c8

What instruction is that? You don't know? Neither do I. Obviously, looking at the bytes of instructions directly isn't very effective unless you memorize which instruction corresponds to which bytes.
Now, if I tell you that instruction is

	mov rax, rcx

Much better, isn't it? You may not know yet what this means, but at least you can read it.
The previous raw bytes are in a way the processor would understand directly, so we say it's written in a machine language. As for the human-readable form, it's in an assembly language.
To use assembly languages, assemblers have been created: programs that convert assembly code to machine code.

Naturally, machine language may vary from one processor to another. Any CPU belongs to a certain architecture, which defines, among other things, the instruction set that CPU understands.
Therefore, assembly isn't a single programming language, but a family of languages, each of which gives human-readable form to the machine code understood by a certain CPU architecture.

Here, we'll show assembly code for the x86 architecture, to which most computers' CPUs belong (as opposed to mobile devices, whose processors are generally ARM). Specifically, the assembly code shown here is for the 64-bit version of the x86 archictecture, which is generally called x86-64, x64, or amd64. (That last name is used for Intel processors as well as AMD ones.)

Assembly languages are often called low-level languages, because they deal very closely with hardware. In contrast, all other programming languages are called high-level languages. (Some people say C is a low-level language, because it's much closer to the hardware than languages like Python, but throwing C in the same basket as assembly isn't right either. Perhaps we should compromise and call C a middle-level language?)

Assembly has significant short-comings, though, and that's what ultimately led to the creation of high-level languages. Namely, assembly

  • isn't portable: code written for one processor won't necessarily work on a different one. Nowadays this may not be so much of an issue, since there's only half a dozen prevailing CPU architectures now, but back when the first high-level languages were created, this was a serious issue. Also, assembly code depends on which assembler you use, because each have their own syntax and directives; this is unlike writing C code, because C always has the same syntax regardless of which compiler will be used. (Assembly code also depends on the operating system, but so does most high-level code anyway.)

  • is hard to read and mantain: ever heard of spaghetti code? In assembly that's the only way of doing anything. There's no if or while or anything of that sort. Even Dijkstra's famous paper "Go To Statement Considered Harmful" has a remark in that sense:

[...] and I became convinced that the go to statement should be abolished from all higher level" programming languages (i.e. everything except, perhaps, plain machine code)

Not only that, but assembly allows doing computations in bizarre ways, which might as well be faster to execute, but are much slower to understand.

  • is easy to make mistakes in: the closer you get to the hardware, the more annoying details you'll forget to put in your code there are. Also, since assembly is even closer to the hardware than C, you'll get all the segmentation faults you'd get there, plus a few more (no, really). So if you're used to Java levels of hand-holding, I warn you beforehand: this will be a royal pain.

  • lacks abstractions that make coding easier. Classes, closures, smart pointers / garbage collection, you name it... none of this exists here.

It should be noted, however, that all this high-level code has to become machine code at some point so it can be executed: usually, this is done translating that code to assembly first (after which the assembler takes over).
And who does that? The all-mighty Compiler, granted to us by the Wise Ones... not for us, but for themselves, because they were fed up with assembly!

Full compilation diagram

After learning all that, my mental compilation diagram was finally updated to this:

graph TB
c1(foo1.c) -- preprocessor --> pp1(foo1.i)
c2(foo2.c) --> pp2(foo2.i)
cN(fooN.c) --> ppN(fooN.i)
subgraph compiler
pp1 -- frontend --> ir1(IR, foo1)
pp2 --> ir2(IR, foo2)
ppN --> irN(IR, foo3)
ir1 -- backend --> s1(foo1.S: assembly)
ir2 --> s2(foo2.S)
irN --> sN(fooN.S)
end
s1 -- assembler --> o1(foo1.o: machine code)
s2 --> o2(foo2.o)
sN --> oN(fooN.o)
dl(dynamic libraries: machine code) -- linker, runtime --> p
sl(static libraries: machine code) -- linker --> p{program: machine code}
o1 -- linker --> p
o2 --> p
oN --> p
Loading

Note how the compiler is split into frontend and backend: compilers usually support writing machine code to more than one CPU architecture, so rather than converting the high-level code to that directly, it first converts it into some form of architecture-independent intermediate representation (IR).

Also, it may seem weird that the linker recieves and produces machine code. Indeed, the linker doesn't translate the code, it just takes the symbols (functions, global variables, etc) referenced (but not defined) in some file and ties them to their definition in some other file. If the input files are being linked against some dynamic library, the linker is called again at runtime.

System Requirements

Assembly isn't portable at all. Therefore, the code here will only run in Linux, in a CPU with the x86-64 architecture. If you don't know yours, run

	$ uname -m

To assemble the code, you'll need nasm (Netwide Assembler), version 2.12 or greater. To link it, any linker will do. (ld and gold come with binutils, so chances are you have them already).

For assembly code that uses C library functions, you'll need an implementation of the C library; glibc will do (once again, you probably have it). gcc isn't strictly needed, but it makes it easier to link such code.

Human Requirements

I expect you to have a solid understanding of the basic programming language concepts: branches, loops, functions, arrays etc. If you're still struggling with these, come back later.
I do not expect you to know C - however, some things are explained in terms of how they would look like in C, and some C functions are used in the code, so you may have to look these things up if you don't know them already.

Assembling and linking

UPDATE: there's a Makefile now, so all you have to do is run 'make' to build all programs. Note that the Makefile requires a C compiler.

Assembling with nasm:

	$ nasm -g -f elf64 foo.asm

The -g switch is to produce debugging information, for e.g. gdb, and it's optional. The -f switch specifies the format (in this case, the 64-bit Executable and Linking Format (ELF)).
If everything goes well, you should get a foo.o file.

Linking:

	$ ld -o foo foo.o		# default
	$ gcc -o [-no-pie] foo foo.o -v	# if your file contains C function calls

The -o switch (in both lines) specifies the executable's name; if omitted, it will be named a.out. The -v switch (in the 2nd line) is optional, and increases verbosity, in case you want to see what gcc is doing under the hood. You may need the -no-pie option when linking with gcc if your code is using absolute addresses.
If, upon trying to execute the executable, you get

	bash: ./foo: No such file or directory

It means something went wrong when linking, but you've got an useless file nonetheless. Sweet.

Debugging

Debugging programs generated by assemblers might seem, in principle, the same as with any other program. However, debuggers are usually tied to the high-level code that generated that program (stepping through line numbers in that code, keeping track of variables, etc). Here, we normally want to step through instructions rather than source code lines, and to see the registers' and memory's contents instead of variables.
I don't know whether the debugger of your favourite IDE (if you have one) has such features: feel free to check that. What I do know is the GNU Debugger (gdb) has them:

option description
disas[semble] print the instructions of a function.
set disassembly-flavor intel so that the output of disas will be in intel syntax, as opposed to AT&T (which is gdb's default)
si, ni analogous to s and n execept they step through instructions rather than source code lines
info reg [reg1] [reg2] ... prints the value of the requested registers. (Omitting that argument will print all registers)
print $<reg> another way of printing a single register's value. The $ is required.
x/<fmt> examine the contents of a memory location.
info stack print the stack.

Also, there are a few debugging tools out there that you probably didn't need with high-level languages, but which are of great use in assembly:

  • strace: prints your program's system calls. This can be used to quickly find errors in system calls.
  • ltrace: prints your program's library calls. Same idea.

And as usual, valgrind is wonderful for finding memory-related errors.

Intel vs AT&T syntax

In x86 assembly, there are two "flavors" of syntax: Intel and AT&T. nasm uses Intel syntax, while the GNU assmebler (as) uses AT&T syntax by default (though it has support for Intel syntax as well). All source files presented here were written for nasm and therefore use the Intel syntax.

The file att.md summarizes the differences between the two flavors.

References

There are several seemingly vague references in the code, such as 'ABI', 'instruction set', etc. Here are the documents I'm citing:

Reference Document
ABI System V Application Binary Interface, AMD64 Architecture Processor Supplement, Draft Version 0.99.8
Basic architecture Intel(R) 64 and IA-32 Architectures Software Developer's Manual Volume 1: Basic Architecture
Instruction set Intel(R) 64 and IA-32 Architectures Software Developer's Manual Volume 2 (2A, 2B & 2C): Instruction Set Reference, A-Z
NASM manual NASM - The Netwide Assembler, version 2.12.01
System programming guide Intel(R) 64 and IA-32 Architectures Software Developer's Manual Volume 3 (3A, 3B, 3C & 3D): System Programming Guide

It's also noteworthy that the number corresponding to each system call can be found in /usr/include/asm/unistd_64.h.

Contributing

I am by no means an expert in assembly. If you see anything that's wrong or poorly explained, or if there's something that wasn't mentioned here but you think should be, please file an issue in Gitlab and/or send a pull request.

External Links

This image shows all x86-64 registers.

Acknowledgements

Thanks to Vitor Guidi for the suggestion of adding exercises.

Copyright

This file, as well as all other files in this project, are relased under the CC-BY-SA 2.0 license. See the file called LICENSE for details.

About

Introduction to x86-64 assembly

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published