[MIPS] miscompile of 64-bit shift with masked shift amount #64794

jacobly0 · 2023-08-18T10:19:34Z

target triple = "mips"

define i64 @f(i64 %0) {
  %2 = and i64 %0, 63
  %3 = lshr i64 -1, %2
  ret i64 %3
}

define i32 @main() {
  %1 = call i64 @f(i64 12)
  %2 = icmp ne i64 %1, lshr (i64 -1, i64 12)
  %3 = zext i1 %2 to i32
  ret i32 %3
}

version 16.0.0 (https://github.com/llvm/llvm-project.git 08d094a0e457360ad8b94b017d2dc277e697ca76) returns 0
version 17.x (https://github.com/llvm/llvm-project.git 8f4dd44097c9ae25dd203d5ac87f3b48f854bba8) returns 1

        andi    $1, $5, 63
        addiu   $2, $zero, -1
-       srlv    $2, $2, $1
-       not     $1, $1
-       addiu   $3, $zero, -2
-       sllv    $1, $3, $1
-       or      $3, $1, $2
        srlv    $3, $2, $1
        andi    $1, $5, 32
-       movn    $3, $2, $1
        move    $2, $3
        jr      $ra
        movn    $2, $zero, $1

The text was updated successfully, but these errors were encountered:

llvmbot · 2023-08-18T10:36:08Z

@llvm/issue-subscribers-backend-mips

jacobly0 · 2023-08-19T10:53:25Z

These changes get downstream tests passing:

diff --git a/llvm/lib/Target/Mips/MipsISelLowering.cpp b/llvm/lib/Target/Mips/MipsISelLowering.cpp
index 18d7773067f1..d92e94a353bf 100644
--- a/llvm/lib/Target/Mips/MipsISelLowering.cpp
    b/llvm/lib/Target/Mips/MipsISelLowering.cpp
@@ -2593,16  2593,20 @@ SDValue MipsTargetLowering::lowerShiftLeftParts(SDValue Op,
   SDValue Shamt = Op.getOperand(2);
   // if shamt < (VT.bits):
   //  lo = (shl lo, shamt)
-  //  hi = (or (shl hi, shamt) (srl (srl lo, 1), ~shamt))
   //  hi = (or (shl hi, shamt) (srl (srl lo, 1), (xor shamt, VT.bits-1)))
   // else:
   //  lo = 0
   //  hi = (shl lo, shamt[4:0])
-  SDValue Not = DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
-                            DAG.getConstant(-1, DL, MVT::i32));
   SDValue Not =
       DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftRight1Lo = DAG.getNode(ISD::SRL, DL, VT, Lo,
                                       DAG.getConstant(1, DL, VT));
   SDValue ShiftRightLo = DAG.getNode(ISD::SRL, DL, VT, ShiftRight1Lo, Not);
-  SDValue ShiftLeftHi = DAG.getNode(ISD::SHL, DL, VT, Hi, Shamt);
   SDValue ShamtMasked =
       DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftLeftHi = DAG.getNode(ISD::SHL, DL, VT, Hi, ShamtMasked);
   SDValue Or = DAG.getNode(ISD::OR, DL, VT, ShiftLeftHi, ShiftRightLo);
   SDValue ShiftLeftLo = DAG.getNode(ISD::SHL, DL, VT, Lo, Shamt);
   SDValue Cond = DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
@@ -2623,7  2627,7 @@ SDValue MipsTargetLowering::lowerShiftRightParts(SDValue Op, SelectionDAG &DAG,
   MVT VT = Subtarget.isGP64bit() ? MVT::i64 : MVT::i32;
 
   // if shamt < (VT.bits):
-  //  lo = (or (shl (shl hi, 1), ~shamt) (srl lo, shamt))
   //  lo = (or (shl (shl hi, 1), (xor shamt, VT.bits-1)) (srl lo, shamt))
   //  if isSRA:
   //    hi = (sra hi, shamt)
   //  else:
@@ -2635,15  2639,19 @@ SDValue MipsTargetLowering::lowerShiftRightParts(SDValue Op, SelectionDAG &DAG,
   //  else:
   //   lo = (srl hi, shamt[4:0])
   //   hi = 0
-  SDValue Not = DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
-                            DAG.getConstant(-1, DL, MVT::i32));
   SDValue Not =
       DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftLeft1Hi = DAG.getNode(ISD::SHL, DL, VT, Hi,
                                      DAG.getConstant(1, DL, VT));
   SDValue ShiftLeftHi = DAG.getNode(ISD::SHL, DL, VT, ShiftLeft1Hi, Not);
   SDValue ShiftRightLo = DAG.getNode(ISD::SRL, DL, VT, Lo, Shamt);
   SDValue Or = DAG.getNode(ISD::OR, DL, VT, ShiftLeftHi, ShiftRightLo);
-  SDValue ShiftRightHi = DAG.getNode(IsSRA ? ISD::SRA : ISD::SRL,
-                                     DL, VT, Hi, Shamt);
   SDValue ShamtMasked =
       DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftRightHi =
       DAG.getNode(IsSRA ? ISD::SRA : ISD::SRL, DL, VT, Hi, ShamtMasked);
   SDValue Cond = DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                              DAG.getConstant(VT.getSizeInBits(), DL, MVT::i32));
   SDValue Ext = DAG.getNode(ISD::SRA, DL, VT, Hi,

tru · 2023-08-21T08:18:53Z

Is this fix posted to phabricator somewhere? should we still try to get this fix into 17.x?

brad0 · 2023-08-22T08:22:42Z

@wzssyqa

brad0 · 2023-08-26T05:01:02Z

@FlyGoat

FlyGoat · 2023-08-31T07:54:40Z

@wzssyqa Do you mind to submit it?

yingopq · 2023-09-15T07:04:23Z

@jacobly0 I could not reproduce this issue on mips64el. What is your steps? How can you get result of the forward .ll file?
I added printf in .ll file and used clang to obtain a.out.
Thanks.

jacobly0 · 2023-09-17T02:06:59Z

target triple = "mips-pc-linux"

define i64 @f(i64 %0) {
  %2 = and i64 %0, 63
  %3 = lshr i64 -1, %2
  ret i64 %3
}

define void @__start() {
  %1 = call i64 @f(i64 12)
  %2 = icmp ne i64 %1, lshr (i64 -1, i64 12)
  %3 = zext i1 %2 to i32
  call void asm sideeffect "syscall", "{$2},{$4}"(i32 4001, i32 %3)
  unreachable
}

$ llc-16 repro.ll -o 16.s
$ llc-17 repro.ll -o 17.s
$ diff -U2 16.s 17.s
--- 16.s
    17.s
@@ -23,11  23,7 @@
 	andi	$1, $5, 63
 	addiu	$2, $zero, -1
-	srlv	$2, $2, $1
-	not	$1, $1
-	addiu	$3, $zero, -2
-	sllv	$1, $3, $1
-	or	$3, $1, $2
 	srlv	$3, $2, $1
 	andi	$1, $5, 32
-	movn	$3, $2, $1
 	move	$2, $3
 	jr	$ra
 	movn	$2, $zero, $1
$ clang-16 -nostdlib -static -fuse-ld=lld -target mips-pc-linux repro.ll && qemu-mips ./a.out; echo $?
0
$ clang-17 -nostdlib -static -fuse-ld=lld -target mips-pc-linux repro.ll && qemu-mips ./a.out; echo $?
1

yingopq · 2023-09-18T07:53:37Z

@jacobly0 I used mips64el and did not reproduce, I would try mips.

$ sudo ./install-ninja/bin/clang-17 -static -fuse-ld=/usr/bin/mips64el-linux-gnuabi64-ld -target mips64el-unknown-linux-gnuabi64 1.ll -o main3 && qemu-mips64el ./main3; echo $?
fffffffffffff
fffffffffffff
0
0
$ cat 1.ll
target triple = "mips64el-unknown-linux-gnuabi64"

@.str = private unnamed_addr constant [4 x i8] c"%d\0A\00", align 1
@.str64 = private unnamed_addr constant [5 x i8] c"%lx\0A\00", align 1

define i64 @f(i64 %0) {
  %2 = and i64 %0, 63
  %3 = lshr i64 -1, %2
  %4 = call signext i32 (i8*, ...) @printf(i8* getelementptr inbounds ([5 x i8], [5 x i8]* @.str64, i64 0, i64 0), i64 signext %3)
  %5 = lshr i64 -1, %0
  %6 = call signext i32 (i8*, ...) @printf(i8* getelementptr inbounds ([5 x i8], [5 x i8]* @.str64, i64 0, i64 0), i64 signext %5)
  ret i64 %3
}

define i32 @main() {
  %1 = call i64 @f(i64 12)
  %2 = icmp ne i64 %1, lshr (i64 -1, i64 12)
  %3 = zext i1 %2 to i32
  %4 = call signext i32 (i8*, ...) @printf(i8* getelementptr inbounds ([4 x i8], [4 x i8]* @.str, i64 0, i64 0), i32 signext %3)
  ret i32 %3
}

declare signext i32 @printf(i8*, ...)

jacobly0 · 2023-09-18T08:32:05Z

There's no way my repro exhibits the issue on mips64 because it happens after splitting a 64-bit shift.

yingopq · 2023-09-22T07:22:30Z

@jacobly0 Yes, I reproduced on mips32el and did little change about diff and the result was same OK.
How did you think my diff? If OK, I would submit it.
Thanks.

diff --git a/llvm/lib/Target/Mips/MipsISelLowering.cpp b/llvm/lib/Target/Mips/MipsISelLowering.cpp
index 18d7773067f1..a0bfeb1dc3f0 100644
--- a/llvm/lib/Target/Mips/MipsISelLowering.cpp
    b/llvm/lib/Target/Mips/MipsISelLowering.cpp
@@ -2593,23  2593,29 @@ SDValue MipsTargetLowering::lowerShiftLeftParts(SDValue Op,
   SDValue Shamt = Op.getOperand(2);
   // if shamt < (VT.bits):
   //  lo = (shl lo, shamt)
-  //  hi = (or (shl hi, shamt) (srl (srl lo, 1), ~shamt))
   //  hi = (or (shl hi, shamt) (srl (srl lo, 1), (xor shamt, VT.bits-1))))
   // else:
   //  lo = 0
   //  hi = (shl lo, shamt[4:0])
   SDValue Not = DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
-                            DAG.getConstant(-1, DL, MVT::i32));
                             DAG.getConstant(VT.getSizeInBits()-1, DL, MVT::i32));
   SDValue ShiftRight1Lo = DAG.getNode(ISD::SRL, DL, VT, Lo,
                                       DAG.getConstant(1, DL, VT));
   SDValue ShiftRightLo = DAG.getNode(ISD::SRL, DL, VT, ShiftRight1Lo, Not);
   SDValue ShamtMasked =
       DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue HiTrue =
       DAG.getNode(ISD::SHL, DL, VT, Hi, ShamtMasked);
   SDValue ShiftLeftHi = DAG.getNode(ISD::SHL, DL, VT, Hi, Shamt);
   SDValue Or = DAG.getNode(ISD::OR, DL, VT, ShiftLeftHi, ShiftRightLo);
   SDValue ShiftLeftLo = DAG.getNode(ISD::SHL, DL, VT, Lo, Shamt);
   SDValue Cond = DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                              DAG.getConstant(VT.getSizeInBits(), DL, MVT::i32));
 
   Lo = DAG.getNode(ISD::SELECT, DL, VT, Cond,
                    DAG.getConstant(0, DL, VT), ShiftLeftLo);
-  Hi = DAG.getNode(ISD::SELECT, DL, VT, Cond, ShiftLeftLo, Or);
   Hi = DAG.getNode(ISD::SELECT, DL, VT, Cond, HiTrue, Or);
 
   SDValue Ops[2] = {Lo, Hi};
   return DAG.getMergeValues(Ops, DL);
@@ -2623,7  2629,7 @@ SDValue MipsTargetLowering::lowerShiftRightParts(SDValue Op, SelectionDAG &DAG,
   MVT VT = Subtarget.isGP64bit() ? MVT::i64 : MVT::i32;
 
   // if shamt < (VT.bits):
-  //  lo = (or (shl (shl hi, 1), ~shamt) (srl lo, shamt))
   //  lo = (or (shl (shl hi, 1), (xor shamt, VT.bits-1))) (srl lo, shamt))
   //  if isSRA:
   //    hi = (sra hi, shamt)
   //  else:
@@ -2636,12  2642,17 @@ SDValue MipsTargetLowering::lowerShiftRightParts(SDValue Op, SelectionDAG &DAG,
   //   lo = (srl hi, shamt[4:0])
   //   hi = 0
   SDValue Not = DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
-                            DAG.getConstant(-1, DL, MVT::i32));
                             DAG.getConstant(VT.getSizeInBits()-1, DL, MVT::i32));
   SDValue ShiftLeft1Hi = DAG.getNode(ISD::SHL, DL, VT, Hi,
                                      DAG.getConstant(1, DL, VT));
   SDValue ShiftLeftHi = DAG.getNode(ISD::SHL, DL, VT, ShiftLeft1Hi, Not);
   SDValue ShiftRightLo = DAG.getNode(ISD::SRL, DL, VT, Lo, Shamt);
   SDValue Or = DAG.getNode(ISD::OR, DL, VT, ShiftLeftHi, ShiftRightLo);
   SDValue ShamtMasked =
       DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue LoTrue =
       DAG.getNode(IsSRA ? ISD::SRA : ISD::SRL, DL, VT, Hi, ShamtMasked);
   SDValue ShiftRightHi = DAG.getNode(IsSRA ? ISD::SRA : ISD::SRL,
                                      DL, VT, Hi, Shamt);
   SDValue Cond = DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
@@ -2658,7  2669,7 @@ SDValue MipsTargetLowering::lowerShiftRightParts(SDValue Op, SelectionDAG &DAG,
                        ShiftRightHi);
   }
 
-  Lo = DAG.getNode(ISD::SELECT, DL, VT, Cond, ShiftRightHi, Or);
   Lo = DAG.getNode(ISD::SELECT, DL, VT, Cond, LoTrue, Or);
   Hi = DAG.getNode(ISD::SELECT, DL, VT, Cond,
                    IsSRA ? Ext : DAG.getConstant(0, DL, VT), ShiftRightHi);

jacobly0 · 2023-09-22T15:58:32Z

Note that when shamt < 32 then shamt is necessarily equal to shamt[4:0], which is why the same masked shift can be reused for both cases. The select does stop the propagation of this poison in the other case, so this diff is certainly valid, it just generates more instructions.

It would be nice to lower these masked shifts later into just a mips shift instruction, since the cpu already implicitly masks shifts, which you can see being done in other target InstrInfo.td files. This would allow the backend to generate the original optimized instruction sequence again without risking misoptimizations by shared optimization passes, but I don't think that needs to make it into a release.

yingopq · 2023-09-25T02:48:44Z

Note that when shamt < 32 then shamt is necessarily equal to shamt[4:0], which is why the same masked shift can be reused for both cases. The select does stop the propagation of this poison in the other case, so this diff is certainly valid, it just generates more instructions.

@jacobly0 In function MipsTargetLowering::lowerShiftLeftParts, should we modify ShiftLeftLo rather than ShiftLeftHi according to your idea which would reduce instructions?

It would be nice to lower these masked shifts later into just a mips shift instruction, since the cpu already implicitly masks shifts, which you can see being done in other target InstrInfo.td files. This would allow the backend to generate the original optimized instruction sequence again without risking misoptimizations by shared optimization passes, but I don't think that needs to make it into a release.

I did not undertstand clearly, you mean we did not need to commit these codes to release 17.x?

jacobly0 · 2023-10-02T16:39:54Z

In function MipsTargetLowering::lowerShiftLeftParts, should we modify ShiftLeftLo rather than ShiftLeftHi according to your idea which would reduce instructions?

Sorry, yeah, I meant to make the same change to both functions:

diff --git a/llvm/lib/Target/Mips/MipsISelLowering.cpp b/llvm/lib/Target/Mips/MipsISelLowering.cpp
index 18d7773067f1..480861156eb6 100644
--- a/llvm/lib/Target/Mips/MipsISelLowering.cpp
    b/llvm/lib/Target/Mips/MipsISelLowering.cpp
@@ -2593,18  2593,22 @@ SDValue MipsTargetLowering::lowerShiftLeftParts(SDValue Op,
   SDValue Shamt = Op.getOperand(2);
   // if shamt < (VT.bits):
   //  lo = (shl lo, shamt)
-  //  hi = (or (shl hi, shamt) (srl (srl lo, 1), ~shamt))
   //  hi = (or (shl hi, shamt) (srl (srl lo, 1), (xor shamt, VT.bits-1)))
   // else:
   //  lo = 0
   //  hi = (shl lo, shamt[4:0])
-  SDValue Not = DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
-                            DAG.getConstant(-1, DL, MVT::i32));
   SDValue Not =
       DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftRight1Lo = DAG.getNode(ISD::SRL, DL, VT, Lo,
                                       DAG.getConstant(1, DL, VT));
   SDValue ShiftRightLo = DAG.getNode(ISD::SRL, DL, VT, ShiftRight1Lo, Not);
   SDValue ShiftLeftHi = DAG.getNode(ISD::SHL, DL, VT, Hi, Shamt);
   SDValue Or = DAG.getNode(ISD::OR, DL, VT, ShiftLeftHi, ShiftRightLo);
-  SDValue ShiftLeftLo = DAG.getNode(ISD::SHL, DL, VT, Lo, Shamt);
   SDValue ShamtMasked =
       DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftLeftLo = DAG.getNode(ISD::SHL, DL, VT, Lo, ShamtMasked);
   SDValue Cond = DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                              DAG.getConstant(VT.getSizeInBits(), DL, MVT::i32));
   Lo = DAG.getNode(ISD::SELECT, DL, VT, Cond,
@@ -2623,7  2627,7 @@ SDValue MipsTargetLowering::lowerShiftRightParts(SDValue Op, SelectionDAG &DAG,
   MVT VT = Subtarget.isGP64bit() ? MVT::i64 : MVT::i32;

   // if shamt < (VT.bits):
-  //  lo = (or (shl (shl hi, 1), ~shamt) (srl lo, shamt))
   //  lo = (or (shl (shl hi, 1), (xor shamt, VT.bits-1)) (srl lo, shamt))
   //  if isSRA:
   //    hi = (sra hi, shamt)
   //  else:
@@ -2635,15  2639,19 @@ SDValue MipsTargetLowering::lowerShiftRightParts(SDValue Op, SelectionDAG &DAG,
   //  else:
   //   lo = (srl hi, shamt[4:0])
   //   hi = 0
-  SDValue Not = DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
-                            DAG.getConstant(-1, DL, MVT::i32));
   SDValue Not =
       DAG.getNode(ISD::XOR, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftLeft1Hi = DAG.getNode(ISD::SHL, DL, VT, Hi,
                                      DAG.getConstant(1, DL, VT));
   SDValue ShiftLeftHi = DAG.getNode(ISD::SHL, DL, VT, ShiftLeft1Hi, Not);
   SDValue ShiftRightLo = DAG.getNode(ISD::SRL, DL, VT, Lo, Shamt);
   SDValue Or = DAG.getNode(ISD::OR, DL, VT, ShiftLeftHi, ShiftRightLo);
-  SDValue ShiftRightHi = DAG.getNode(IsSRA ? ISD::SRA : ISD::SRL,
-                                     DL, VT, Hi, Shamt);
   SDValue ShamtMasked =
       DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                   DAG.getConstant(VT.getSizeInBits() - 1, DL, MVT::i32));
   SDValue ShiftRightHi =
       DAG.getNode(IsSRA ? ISD::SRA : ISD::SRL, DL, VT, Hi, ShamtMasked);
   SDValue Cond = DAG.getNode(ISD::AND, DL, MVT::i32, Shamt,
                              DAG.getConstant(VT.getSizeInBits(), DL, MVT::i32));
   SDValue Ext = DAG.getNode(ISD::SRA, DL, VT, Hi,

I did not undertstand clearly, you mean we did not need to commit these codes to release 17.x?

I'm suggesting a potential future optimization to turn x >> (shift & 31) into a single srlv instead of andi srlv, since the mips variable shift instruction already implicitly masks the shift, like what is already done with x86 and wasm. Since this would be strictly an optimization, I'm saying it's not needed in the release for correct behavior.

yingopq · 2023-10-19T07:22:05Z

@jacobly0 I appreciate your latest diff, and how about I submit this diff and then research the optimizition?

jacobly0 · 2023-10-19T07:26:57Z

Yes, that sound good to me.

In function lowerShiftRightParts and lowerShiftLeftParts: 1. xor should use VT.bits-1 not -1; 2. The comments above the code are incorrect； 3. ShiftLeftLo and ShiftRightHi are wrong respectively. Fix llvm#64794

yingopq · 2023-11-06T03:46:15Z

@jacobly0 Why we add ShamtMasked, the mips cpu has done this when shift > bits?

I'm suggesting a potential future optimization to turn x >> (shift & 31) into a single srlv instead of andi srlv

This means modify all relateds .ll testfiles?

jacobly0 · 2023-11-06T06:29:34Z

Why we add ShamtMasked, the mips cpu has done this when shift > bits?

Because ISD::SRL is an llvm shift, not a mips shift, so other llvm passes assume that a shift larger than the bit size is UB and will happily delete such an instruction. Instead, you have to represent the operation that is actually happening, which is ISD::SRL of ISD::AND, and then during instruction selection you know you have a single mips instruction that performs both operations.

nikic · 2023-11-08T08:31:05Z

/cherry-pick 8d24d39

llvmbot · 2023-11-08T08:35:55Z

/branch llvm/llvm-project-release-prs/issue64794

llvmbot · 2023-11-08T08:43:03Z

/pull-request llvm/llvm-project-release-prs#768

github-actions bot added the new issue label Aug 18, 2023

jacobly0 mentioned this issue Aug 18, 2023

LLVM 17 regression: floating point behavior tests on mips ziglang/zig#16846

Closed

nikic added this to the LLVM 17.0.X Release milestone Aug 18, 2023

nikic added backend:MIPS miscompilation and removed new issue labels Aug 18, 2023

nikic mentioned this issue Sep 26, 2023

64 bit shift is broken in nightly build for MIPS rust-lang/rust#116177

Closed

Cyanoxygen mentioned this issue Nov 3, 2023

[Mips] Incorrect code generated to perform i128 shifting by a truncated amount #71142

Closed

yingopq mentioned this issue Nov 3, 2023

[MIPS] Fix miscompile of 64-bit shift with masked shift amount #71154

Closed

martn3 mentioned this issue Nov 8, 2023

Cherry-pick of upstreamed LLVM patch that fix MIPS int shift miscompilation rust-lang/llvm-project#156

Closed

llvmbot mentioned this issue Nov 8, 2023

PR for llvm/llvm-project#64794 llvm/llvm-project-release-prs#768

Merged

EugeneZelenko added the release:backport label Nov 8, 2023

tatsuya6502 mentioned this issue Nov 11, 2023

With Rust 1.73.0, some unit tests started to fail for mips-unknown-linux-musl target moka-rs/moka#333

Open

tru closed this as completed in llvm/llvm-project-release-prs#768 Nov 13, 2023

EugeneZelenko added the release:merged label Nov 13, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[MIPS] miscompile of 64-bit shift with masked shift amount #64794

[MIPS] miscompile of 64-bit shift with masked shift amount #64794

jacobly0 commented Aug 18, 2023

llvmbot commented Aug 18, 2023

jacobly0 commented Aug 19, 2023

tru commented Aug 21, 2023

brad0 commented Aug 22, 2023

brad0 commented Aug 26, 2023

FlyGoat commented Aug 31, 2023

yingopq commented Sep 15, 2023

jacobly0 commented Sep 17, 2023 •

edited

Loading

yingopq commented Sep 18, 2023

jacobly0 commented Sep 18, 2023 •

edited

Loading

yingopq commented Sep 22, 2023

jacobly0 commented Sep 22, 2023

yingopq commented Sep 25, 2023 •

edited

Loading

jacobly0 commented Oct 2, 2023 •

edited

Loading

yingopq commented Oct 19, 2023

jacobly0 commented Oct 19, 2023

yingopq commented Nov 6, 2023 •

edited

Loading

jacobly0 commented Nov 6, 2023

nikic commented Nov 8, 2023

llvmbot commented Nov 8, 2023

llvmbot commented Nov 8, 2023

[MIPS] miscompile of 64-bit shift with masked shift amount #64794

[MIPS] miscompile of 64-bit shift with masked shift amount #64794

Comments

jacobly0 commented Aug 18, 2023

llvmbot commented Aug 18, 2023

jacobly0 commented Aug 19, 2023

tru commented Aug 21, 2023

brad0 commented Aug 22, 2023

brad0 commented Aug 26, 2023

FlyGoat commented Aug 31, 2023

yingopq commented Sep 15, 2023

jacobly0 commented Sep 17, 2023 • edited Loading

yingopq commented Sep 18, 2023

jacobly0 commented Sep 18, 2023 • edited Loading

yingopq commented Sep 22, 2023

jacobly0 commented Sep 22, 2023

yingopq commented Sep 25, 2023 • edited Loading

jacobly0 commented Oct 2, 2023 • edited Loading

yingopq commented Oct 19, 2023

jacobly0 commented Oct 19, 2023

yingopq commented Nov 6, 2023 • edited Loading

jacobly0 commented Nov 6, 2023

nikic commented Nov 8, 2023

llvmbot commented Nov 8, 2023

llvmbot commented Nov 8, 2023

jacobly0 commented Sep 17, 2023 •

edited

Loading

jacobly0 commented Sep 18, 2023 •

edited

Loading

yingopq commented Sep 25, 2023 •

edited

Loading

jacobly0 commented Oct 2, 2023 •

edited

Loading

yingopq commented Nov 6, 2023 •

edited

Loading