Skip to content

leachiml/DCDC-IBB_-12V

Repository files navigation

DCDC-IBB_-12V

High Voltage Inverting Buck-Boost Converter 48V to -12V 2A

Based on the LM5085 from Texas Instruments

  • Input: 45V to 63V DC (nominal 48V)
  • Output: -12V DC (variable)
  • Max. Output Current: 2A (max. 2.2A)
  • Disable Jumper
  • Output-On LED

Voltage configuration

To set the voltage, turn the Trim-Potentiometer until you've reached your desired Output.

NOTE: Don't set Voltages below -16V, because it could damage your circuit! (If you don't replace certain Capacitors)

How do I open the Files?

You have multiple Options:

  • Go to my CADLAB.io Repository and view/download the Files
  • Open the Files with the Altium viewer
  • Open the Files in Altium Designer 19

LICENSE

(c) Copyright Michael Berger 2021

This source describes Open Hardware and is licensed under the CERN-OHL-S v2 .

You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2 or any later version (https://ohwr.org/cern_ohl_s_v2.txt).

This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 or any later version for applicable conditions.

Source location: https://github.com/leachiml/DCDC-IBB_-12V

As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the PCB of the DCDC IBB or other products you make using this source.