- 1. Please Donate
- 2. CI Matrix
- 3. Introduction
- 4. Programming Style: Modern BASH DSL
- 5. Compatibility
- 6. Project Motivation
- 7. Installing Bashmatic
- 8. Discovering via the
Makefile
- 9. Examples of Bashmatic in Action
- 9.1. Example I. Install Gems via Homebrew
- 9.2. Example II: Download and install binaries.
- 9.3. Example III: Developer Environment Bootstrap Script
- 9.4. Example IV: Installing GRC Colourify Tool
- 9.5. Example V:
db
Shortcut for Database Utilities &db top
- 9.6. Other
db
Functions - 9.7. Sub-Commands of
db
- 9.8.
bin/tablet
Script
- 10. Usage
- 10.1. Function Naming Convention Unpacked
- 10.2. Seeing All Functions
- 10.3. Seeing Specific Functions
- 10.4. Various Modules
- 10.5. Key Modules Explained
- 10.5.1. Runtime Framework — Executing Commands The Right Way™
- 10.5.2. Controlling Output
- 10.5.3. Package management: Brew and RubyGems
- 10.5.4. Shortening URLs and Github Access
- 10.5.5. Github Access
- 10.5.6. File Helpers
- 10.5.7. Array Helpers
- 10.5.8. Utilities
- 10.5.9. Ruby and Ruby Gems
- 10.5.10. Audio & Video Compression Helpers
- 10.5.11. Additional Helpers
- 11. How To Guide
- 12. Contributing
- 13. Copyright & License
Bashmatic® is a BASH framework, meaning its a collection of BASH functions (almost 900 of them) that, we hope, make BASH programming easier, more enjoyable, and more importantly, fun - due to the library’s focus on providing the developer with a constant feedback about what is happening, while a script that uses Bashmatic’s helpers is running.
Tip
|
We suggest that you learn about Bashmatic from the PDF version of this document which is much better for print. |
After you install the library (the default location is ~/.bashmatic
), realize that you have a choice of either:
-
Automatically sourcing the library (and all 900 functions) from your shell 'dotfiles' like
~/.bash_profile
by adding this line:source ~/.bashmatic/init.sh
. On a recent M1 Apple laptop this adds about 100ms total. -
OR, can skip it during your login initialization, and only load it at the top of the scripts that use the library.
Caution
|
Both approaches are absolutely valid and have their pros and cons. Loading bashmatic in your dotfiles could be a bit risky. One way or another we’ll soon provide ways to verify that bashmatic you download is the safe and correct version, every time. |
All we’ll say on this matter is that we manage the optimize the hell out of the sourcing the library. Here is an example:
Bashmatic®'s programming style is heavily influenced by Ruby’s DSL languages. If you take a quick look at the is.sh script, it defines a bunch of DSL functions that can be chained with &&
and ||
to create a compact and self-documenting code like this:
[arrow circle down]
# An example of a DSL-like function
function bashmatic.auto-update() {
local dir="${1:-"${BASHMATIC_HOME"}}"
is.a-directory "${dir}" && {
file.exists-and-newer-than "${dir}/.last-update" 30 && return 0
(
cd ${BASHMATIC_HOME} && \
git.is-it-time-to-update && \
git.sync-remote
)
}
}
# check if the function is defined and call it
is.a-function.invoke bashmatic.auto-update "$@"
To use it in your own scripts, you’ll want to first study the Examples provided below, and take advantage of ach module available under lib
.
Final note, - once Bashmatic is installed and loaded by your shell init files, you can type is.<tab><tab>
to see what functions are available to you that start with is
. Each module under lib
typically defines public functions starting with the name of the file. Such as, functions in array.sh
typically start with array.<something>.<action>
Bashmatic® offers a huge range of ever-growing helper functions for running commands, auto-retrying, repeatable, runtime-measuring execution framework with the key function run
. There are helpers for every occasion, from drawing boxes, lines, headers, to showing progress bars, getting user input, installing packages, and much more.
Note
|
A good portion of the helpers within Bashmatic® are written for OS-X, although many useful functions will also work under linux. Our entire test suite runs on Ubuntu. There is an effort underway to convert Homebrew-specific functions to OS-neutral helpers such as package.install that would work equally well on linux.
|
Start exploring Bashmatic® below with our examples section. When you are ready, the complete entire set of pubic functions (nearly 500 of those) can be found in the functions index page.
And, finally, don’t worry, Bashmatic® is totally open source and free to use and extend. We just like the way it looks with a little ® :)
-
BASH version 4
-
BASH version 3 (partial compatibility, some functions are disabled)
-
ZSH – as of recent update, Bashmatic is almost 90% compatible with ZSH.
Not Currently Supported
-
FISH (although you could use Bashmatic via
bin/bashmatic
script helper, or its executables)
This project was born out of a simple realization made by several very senior and highly experienced engineers, that:
-
It is often easier to use BASH for writing things like universal installers, a.k.a. setup scripts, uploaders, wrappers for all sorts of functionality, such as NPM, rbenv, installing gems, rubies, using AWS, deploying code, etc.
-
BASH function’s return values lend themselves nicely to a compact DSL (domain specific language) where multiple functions can be chained by logical AND
&&
and OR||
to provide a very compact execution logic. Most importantly, we think that this logic is extremely easy to read and understand.
Despite the above points, it is also generally accepted that:
-
A lot of BASH scripts are very poorly written and hard to read and understand.
-
It’s often difficult to understand what the hell is going on while the script is running, because either its not outputting anything useful, OR it’s outputting way too much.
-
When BASH errors occur, shit generally hits the fan and someone decides that they should rewrite the 20-line BASH script in C or Go, because, well, it’s a goddamn BASH script and it ain’t working.
Tip
|
Bashmatic's goal is to make BASH programming both fun, consistent, and provide plenty of visible output to the user so that there is no mystery as to what is going on. |
Perhaps the easiest way to install Bashmatic® is using curl
as shown below.
First, make sure that you have Curl installed, run which curl
to see. Then copy/paste this command into your Terminal.
[arrow down]
bash -c "$(curl -fsSL https://bashmatic.re1.re); bashmatic-install -q"
[arrow up]
Where:
-
-q stands for "quiet";
-
-v for "verbose"
Tip
|
The URL https://bashmatic.re1.re redirects to the HEAD of the bin/bashmatic-install script in the Github Bashmatic Repo. We use this URL so that we retain the ability to redirect the installation to a different script in the future, if need be.
|
If you prefer to be able to examine the script before executing code piped straight off the Internet, I don’t blame you. You are cautious and smart.
For folks like you, here is a slightly more secure way of doing the same thing:
export script="/tmp/install"
curl -fsSL https://bashmatic.re1.re > /tmp/install
chmod 755 /tmp/install
# At this point you can examine /tmp/install
/tmp/install --help
/tmp/install --verbose --debug # install with extra info
This method allows you to examine the /tmp/install
script before running it.
Below are some of the explanations
You can install a branch or a tag of Bashmatic by passing -b / --git-branch <tag|branch>
flag.
You can pass flags to the bashmatic-install
function to control how, where to Bashmatic is installed, and where from it is downloaded, including:
-
-v
or--verbose
for displaying additional output, or the opposite: -
-d
or--debug
will print additional debugging output -
-f
or--force
will replace any existing bashmatic folder with the new one -
-q
or--quiet
for no output -
-l
or--skip-on-login
to NOT install the hook that loads Bashmatic on login. -
If you prefer to install Bashmatic in a non-standard location (the default is
~/.bashmatic
), you can use the-H PATH
flag
For instance, here we are installing Bashmatic into a non-default destination, while printing additional verbose & debug information, as well as using -f
(force) to possibly overwrite the destination folder (if it already exists) with a checkout of Bashmatic according to a tag v2.4.1
:
bash -c "$(curl -fsSL https://bashmatic.re1.re); \
bashmatic-install -d -v -f -b v2.4.1 -H ~/workspace/bashmatic"
If you have your SSH keys installed both locally, and the public key was configured with your account on Github, you might want to install Bashmatic using [email protected]:kigster/bashmatic
origin, instead of the default https://github.com/kigster/bashmatic
:
Here is the complete list of options accepted by the installer:
When you run bash -c "$(curl -fsSL https://bashmatic.re1.re); bashmatic-install"
, the following typically happens:
-
curl
downloads thebin/bashmatic-install
script and passes it to the built-in BASH for evaluation. -
Once evaluated, function
bashmatic-install
is invoked, which actually performs the installation.-
This is the function that accepts the above listed arguments.
-
-
The script may ask for your password to enable sudo access - this may be required on OS-X to install XCode Developer tools (which include
git
) -
If your version of BASH is 3 or older, the script will download and build from sources version 5 of BASH, and install it into
/usr/local/bin/bash
. SUDO may be required for this step. -
On OS-X the script will install Homebrew on OS-X, if not already there.
-
Once Brew is installed, brew packages
coreutils
andgnu-sed
are installed, as both are required and are relied upon by Bashmatic.
-
-
The script will then attempt to
git clone
the bashmatic repo into the Bashmatic home folder, or - if it already exists - it willgit pull
latest changes. -
Finally, unless you specify
-l
or--skip-on-login
the script will check your bash dot files, and will add the hook to load Bashmatic from either~/.bashrc
or~/.bash_profile
.
The last part my require some explanation.
Now, you may or may not want to load Bashmatic on login.
In other words, you have something like this in your ~/.bashrc
:
# Let's see if ~/.bashrc mentions Bashmatic:
$ grep bashmatic ~/.bashrc
[[ -f ~/.bashmatic/init.sh ]] && source ~/.bashmatic/init.sh
- [check circle] Pros of loading at login
-
Instant access to 800 convenience functions Bashmatic© offers and helpers. Bashmatic will auto-update whenever its loaded from the main branch.
- [times circle] Cons of loading at login
-
About 134ms delay at login, and a potential security attack vector (eg, if someone hacks the repo).
Tip
|
We recently dramatically improved the loading time of the entirety of Bashmatic© functions. Previously it took nearly 900ms, almost a full second to load 854 functions. Today it’s no more than 180ms: |
❯ time source init.sh
real 0m0.134s
user 0m0.078s
sys 0m0.074s
If the above command shows the output you see above, when you grep your bashrc
or zshrc
, then all Bashmatic Functions will be loaded into your shell. This could be very convenient, for instance,
-
you could invoke
ruby.install-ruby-with-readline-and-openssl 3.0.1
to get Ruby installed. -
You could invoke
gem.remote.version sym
to see that the last published verison ofsym
is3.0.1
. -
You could join an array of values with with
array.join ", " apple pear orange
NOTICE: Bashmatic takes no more than 200-300ms to load typically. That said, you might not want to have this many shell functions in your environment, so in that case you can skip login hook by passing -l
or --skip-on-login
.
Install it with:
bash -c "$(curl -fsSL https://bashmatic.re1.re); bashmatic-install -l"
In this case we suggest that you simply add the Bashmatic’s bin
folder to the $PATH
.
For instance:
# ~/.bashrc
export BASHMATIC_HOME="${HOME}/.bashmatic"
export PATH="${BASHMATIC_HOME}/bin:${PATH}"
Then you will have access to the executable script bashmatic
which can be used *as a "gateway" to all bashmatic functions:
You use it like so: bashmatic <function> <args>
:
Important
|
Examples below assume you’ve set the PATH to include ${HOME}/.bashmatic/bin
|
# Eg, if as in the previous example you sourced in Bashmatic:
$ bashmatic.version
2.1.2
# If you have not, you can still invoke 'bashmatic.version':
$ bashmatic version
# Or another function, 'array.join' — if you sourced in init.sh:
$ array.join '|' hello goodbye
hello|goodbye
# Or using the script:
$ bashmatic array.join '|' hello goodbye
hello|goodbye
If you get an error, perhaps Bashmatic® did not properly install.
Therefore for situawtion where curl
may not be available, offer the following shell function that works on Linux/Ubuntu and OS-X-based systems. It can be easily extended with new operating systems:
# @description Installs bashmatic dependency into the ~/.bashmatic folder.
function install_bashmatic() {
# install bashmatic using https:// URL instead of git@
command -v curl >/dev/null || {
local OS=$(uname -s)
local code
case ${OS} in
Linux)
apt-get update -yq && apt-get install curl -yqq
code=$?
((code)) && sudo apt-get update -yq && sudo apt-get install curl -yqq
;;
Darwin)
command -v brew >/dev/null || /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
hash -r
brew install curl
;;
*)
echo "OS ${OS} is not supported."
;;
esac
}
[[ -d ~/.bashmatic ]] || bash -c "$(curl -fsSL https://bashmatic.re1.re); bashmatic-install -q -m https"
return 0
}
To discover the breadth of available functions, type the following command to see all imported shell functions:
# List all functions using 4-column mode; print top 5 lines.
❯ bashmatic functions 4 | head -5
7z.a db.psql.connect.db-set hl.yellow-on-gray run.inspect-variables
7z.install db.psql.connect.db-set hr run.inspect-variables-
7z.unzip db.psql.connect.just-d hr.colored run.inspect.set-skip-f
7z.x db.psql.connect.table- http.servers run.on-error.ask-is-en
7z.zip db.psql.connect.table- https.servers run.print-command
# or, to get the count of all functions, use 1 column output:
$ bashmatic functions 1 | wc -l
773
To install Bashmatic manually, follow these steps (feel free to change BASHMATIC_HOME
if you like):
export BASHMATIC_HOME="${HOME}/.bashmatic"
test -d "${BASHMATIC_HOME}" || \
git clone https://github.com/kigster/bashmatic.git "${BASHMATIC_HOME}"
cd "${BASHMATIC_HOME}" && ./bin/bashmatic-install -v
cd ->/dev/null
Sometimes you may not be able to use git
(I have seen issues ranging from local certificate mismatch to old versions of git, and more), but maybe able to download with curl
. In that case, you can lookup the latest tag (substitute "v1.6.0" below with that tag), and then issue this command:
export BASHMATIC_TAG="v2.4.1"
set -e
cd ${HOME}
curl --insecure -fSsl \
https://codeload.github.com/kigster/bashmatic/tar.gz/${BASHMATIC_TAG} \
-o bashmatic.tar.gz
rm -rf .bashmatic && tar xvzf bashmatic.tar.gz && mv bashmatic-${BASHMATIC_TAG} .bashmatic
source ~/.bashmatic/init.sh
cd ${HOME}/.bashmatic && ./bin/bashmatic-install -v
cd ~ >/dev/null
You can always reload Bashmatic® with bashmatic.reload
function. This simply performs the sourcing of ${BASHMATIC_HOME}/init.sh
.
When you install Bashmatic it automatically adds a hook to your ~/.bash_profile
, but if you are on ZSH you may need to add it manually (for now).
Add the following to your ~/.zshrc
file:
[[ -f ~/.bashmatic/init.sh ]] && source "~/.bashmatic/init.sh"
Note
|
The entire library takes less than 300ms to load on ZSH and a recent MacBook Pro. |
The top-level Makefile
is mostly provided as a convenience as it encapsulates some common tasks used in development by Bashmatic Author(s), as well as others useful to anyone exploring Bashmatic.
You can run make help
and read the available targets:
❯ make
help Prints help message auto-generated from the comments.
open-readme Open README.pdf in the system viewer
docker-build Builds the Docker image with the tooling inside
docker-run-bash Drops you into a BASH session with Bashmatic Loaded
docker-run-fish Drops you into a FISH session with Bashmatic Loaded
docker-run-zsh Drops you into a ZSH session with Bashmatic Loaded
docker-run Drops you into a BASH session
file-stats-git Print all files known to `git ls-files` command
file-stats-local Print all non-test files and run `file` utility on them.
install-dev Installs the Development Tooling using dev-setup script
install-ruby Installs the Bashmatic default Ruby version using rbenv
install install BashMatic Locally in ~/.bashmatic
release Make a new release named after the latest tag
tag Tag this commit with .version and push to remote
setup Run the comprehensive development setup on this machine
shell-files Lists every single checked in SHELL file in this repo
test Run fully automated test suite based on Bats
test-parallel Run the fully auto-g mated test suite
update-changelog Auto-generate the doc/CHANGELOG (requires GITHUB_TOKEN env var set)
update-functions Auto-generate doc/FUNCTIONS index at doc/FUNCTIONS.adoc/pdf
update-readme Re-generate the PDF version of the README
update-usage Auto-generate doc/USAGE documentation from lib shell files,
to doc/USAGE.adoc/pdf
update Runs all update targets to regenerate all PDF docs and the
Changelog.
I’ve added whitespaces around a set of common tasks you might find useful.
Let’s take a quick look at what’s available here.
Makefile is provided as a convenience for running most common tasks and to simplify running some more complex tasks that require remembering many arguments, such as make setup
. You might want to use the Makefile for several reasons:
-
make open-readme
This tasks opens the PDF version of the README in your PDF system viewer.
-
make install
This allows you to install the Bashmatic Framework locally. It simply runs
bin/bashmatic-install
script. At most this will add hooks to your shell init files so that Bashmatic is loaded at login. -
make setup
This task invokes the
bin/dev-setup
script under the hood, so that you can setup your local computer developer setup for software development.Now, this script offers a very rich CLI interface, so you can either run the script directly and have a fine-grained control over what it’s doing, or you can run it with default flags via this make target.
This particular make target runs
bin/dev-setup
script with the following actions:dev, cpp, fonts, gnu, go, java, js, load-balancing, postgres, ruby
-
make test
andmake test-parallel
are both meant for Bashmatic Developers and contributors. Please see the Contributing section on how to run and what to expect from the UNIT tests. -
make update
is the task that should be run by library contributors after they’ve made their their changes and want the auto-generated documentation to reflect the new functions added and so on and so force. This tasks also generates the function index, re-generate the latest PDFs ofREADME
,USAGE
or theCHANGELOG
files.
Note
|
Running make update is is required for submitting any pull request.
|
Bashmatic comes with a Dockerfile that can be used to run tests or jsut manually validate various functionality under linux, and possibly to experiment.
Run make docker-build
to create an docker image bashmatic:latest
.
Run make docker-run-bash
(or …-zsh
or …-fish
) to start a container with your favorite shell, and then validate if your functions work as expected.
Note how this dropped me straight into the Linux environment prompt with Bashmatic already installed.
Why do we need another BASH framework?
BASH is know to be too verbose and unreliable. We beg to differ. This is why we wanted to start this README with a couple of examples.
Just look at this tiny, five-line script:
#!/usr/bin/env bash
source ${BASHMATIC_HOME}/init.sh
h2 "Installing ruby gem sym and brew package curl..." \
"Please standby..."
gem.install "sym" && brew.install.package "curl" && \
success "installed sym ruby gem, version $(gem.version sym)"
Results in this detailed and, let’s be honest, gorgeous ASCII output:
Tell me you are not at all excited to start writing complex installation flows in BASH right away?
Not only you get pretty output, but you can each executed command, it’s exit status, whether it’s been successful (green/red), as well each command’s bloody duration in milliseconds. What’s not to like?!?
Still not convinced?
Take a look at a more comprehensive example next.
In this example, we’ll download and install binaries kubectl
and minikube
binaries into /usr/local/bin
We provided an example script in examples/k8s-installer.sh
. Please click and take a look at the source.
Here is the output of running this script:
Why do we think this type of installer is pretty awesome, compared to a silent but deadly shell script that "Jim-in-the-corner" wrote and now nobody understands?
Because:
-
The script goes out of its way to over-communicate what it does to the user.
-
It allows and reminds about a clean getaway (Ctrl-C)
-
It shares the exact command it runs and its timings so that you can eyeball issues like network congestions or network addresses, etc.
-
It shows in green exit code '0' of each command. Should any of the commands fail, you’ll see it in red.
-
It’s source code is terse, explicit, and easy to read. There is no magic. Just BASH functions.
Note
|
If you need to create a BASH installer, Bashmatic® offers some incredible time savers. |
Let’s get back to the Earth, and talk about how to install Bashmatic, and how to use it in more detail right after.
This final and most feature-rich example is not just an example – it’s a working functioning tool that can be used to install a bunch of developer dependencies on your Apple Laptop.
Note
|
the script relies on Homebrew behind the scenes, and therefore would not work on linux or Windows (unless Brew gets ported there). |
It’s located in bin/dev-setup
and has many CLI flags:
In the example below we’ll use dev-setup
script to install the following:
-
Dev Tools
-
PostgreSQL
-
Redis
-
Memcached
-
Ruby 2.7.1
-
NodeJS/NPM/Yarn
Despite that this is a long list, we can install it all in one command.
We’ll run this from a folder where our application is installed, because then the Ruby Version will be auto-detected from our .ruby-version
file, and in addition to installing all the dependencies the script will also run bundle install
and npm install
(or yarn install
). Not bad, huh?
${BASHMATIC_HOME}/bin/dev-setup \
-g "ruby postgres mysql caching js monitoring" \
-r $(cat .ruby-version) \
-p 9.5 \ # use PostgreSQL version 9.5
-m 5.6 # use MySQL version 5.6
This compact command line installs a ton of things, but don’t take our word for it - run it yourself. Or, at the very least enjoy this one extremely long screenshot :)
This is a great tool that colorizes nearly any other tool''s output.
Run it like so:
${BASHMATIC_HOME}/bin/install-grc
You might need to enter your password for SUDO.
Once it completes, run source ~/.bashrc
(or whatever shell you use), and type something like ls -al
or netstat -rn
or ping 1.1.1.1
and notice how all of the above is nicely colored.
If you are using PostgreSQL, you are in luck! Bashmatic includes numerous helpers for PostreSQL’s CLI
utility psql
.
Note
|
Before you begin, we recommend that you install file .psqlrc from Bashmatic’s conf directory into your home folder. While not required, this file sets up your prompt and various macros for PostgreSQL that will come very handy if you use psql with any regularity.
|
What is db top
anyway?
Just like with the regular top
you can see the "top" resource-consuming processes running on your local system, with dbtop
you can observe a self-refreshing report of the actively running queries on up to three database servers at the same time.
Here is the pixelated screenshot of dbtop
running against two live databases:
In order for this to work, you must first define database connection parameters in a YAML file located at the following PATH: ~/.db/database.yml
.
Here is how the file should be organized (if you ever used Ruby on Rails, the standard config/database.yml
file should be fully compatible):
development:
database: development
username: postgres
host: localhost
password:
staging:
database: staging
username: postgres
host: staging.db.example.com
password:
production:
database: production
username: postgres
host: production.db.example.com
password: "a098098safdaf0998ff79789a798a7sdf"
Given the above file, you should be able to run the following command to see all available (registered in the above YAML file) connections:
$ db connections
development
staging
production
Once that’s working, you should be able run dbtop
:
db top development staging production
Note
|
At the moment, only the default port 5432 is supported. If you are using an alternative port, and as long as it’s shared across the connections you can set the PGPORT environment variable that psql will read.
|
DB Top Configuration:
You can configure the following settings for db top
:
-
You can change the location of the
database.yml
file withdb.config.set-file <filepath>
-
You can change the refresh rate of the
dbtop
with eg.db.top.set-refresh 0.5
(in seconds, fractional values allowed). This sets the sleep time between the screen is fully refreshed.
If you run db
without any arguments, or with -h
you will see the following:
As you might notice, there is an ever-growing list of "actions" — the sub-commands to the db
script.
You can view the full list by passing --commands
flag:
Altgernatively, here is the --examples
view:
You can get a list of all availabled db connections with either
db connections
# OR
db --connections
For instance, a recent addition is the ability to invoke pg_activity Python-based DB "top", a much more advanced top query monitor for PostgreSQL.
You can invoke db pga <connection>
where the connection is taken from the database connection definitions shown above. This is what pg-activity
looks like in action:
Once you know what database you are connecting to, you can then run one of the commands:
- db connect <connection>
-
opens psql session to the given connection
- db db-settings-toml <connection>
-
prints all PostgreSQL settings (obtained with
show all
) as a sorted TOML-formatted file. - db -q list-tables <connection>
-
print a list of all tables in the given database, -q (or --quiet) skips printing the header so that only the table listing is printed.
- db csv <connection> <query>
-
export the result of the query as a CSV to STDOUT, eg
$ db csv filestore "select * from files limit 2"
Results in the following output
component_id,file_path,fingerprint_sha_256,fingerprint_comment_stripped_sha_256,license_info
6121f5b3-d68d-479d-9b83-77e9ca07dd2b,weiboSDK/src/main/java/com/sina/weibo/sdk/openapi/models/Tag.java,
6121f5b3-d68d-479d-9b83-77e9ca07dd2b,weiboSDK/src/main/java/com/sina/weibo/sdk/openapi/models/Comment.java,
Building atop of the powerful db
script mechanics, is another powerful script called tablet
.
The script is meant to be run against one database, and perform a table-level operation on a set of tables that can be specified in numerous ways. It started with the need to ANALYZE only some of the tables, specifically those that have not been auto-analyzed, but grew into a much more capable tool that can do things like:
-
Analyze all tables in a database that have never been analyzed`
-
Analyze all tables in a database that have not been analyzed in N days
-
Analyze a set of specific tables, or exclude tables using regular expression
-
Instead of analyzing tables, perform any other table-level command such as:
-
TRUNCATE
-
VACUUM
andVACCUUM FULL
-
DROP TABLE
-
REINDEX TABLE
-
etc..
-
Below is the screenshot of the help screen from this script:
Welcome to Bashmatic – an ever growing collection of scripts and mini-bash frameworks for doing all sorts of things quickly and efficiently.
We have adopted the Google Bash Style Guide, and it’s recommended that anyone committing to this repo reads the guides to understand the conventions, gotchas and anti-patterns.
Bashmatic® provides a large number of functions, which are all loaded in your current shell. The functions are split into two fundamental groups:
-
Functions with names beginning with a
.
are considered "private" functions, for example.run.env
and.run.initializer
-
All other functions are considered public.
The following conventions apply to all functions:
-
We use the "dot" for separating namespaces, hence
git.sync
andgem.install
. -
Function names should be self-explanatory and easy to read.
-
DO NOT abbreviate words.
-
All public functions must be written defensively: i.e. if the function is called from the Terminal without any arguments, and it requires arguments, the function must print its usage info and a meaningful error message.
For instance:
$ gem.install
┌─────────────────────────────────────────────────────────┐
│ « ERROR » Error - gem name is required as an argument │
└─────────────────────────────────────────────────────────┘
Now let’s run it properly:
$ gem.install simple-feed
installing simple-feed (latest)...
✔︎ $ gem install simple-feed ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪〔 5685 ms 〕 0
✔︎ $ gem list > ${BASHMATIC_TEMP}/.gem/gem.list ▪▪▪▪▪▪〔 503 ms 〕 0
The naming convention we use is a derivative of Google’s Bash StyleGuide, using .
to separate BASH function namespaces instead of much more verbose ::
.
After running the above, run bashmatic.functions
function to see all available functions. You can also open the FUNCTIONS.adoc file to see the alphabetized list of all 422 functions.
To get a list of module or pattern-specific functions installed by the framework, run the following:
$ bashmatic.functions-from pattern [ columns ]
For instance:
$ bashmatic.functions-from docker 2
docker.abort-if-down docker.build.container
docker.actions.build docker.containers.clean
.......
docker.actions.update
You can list various modules by listing the lib
sub-directory of the ${BASHMATIC_HOME}
folder.
Note how we use Bashmatic® helper columnize [ columns ]
to display a long list in five columns.
$ ls -1 ${BASHMATIC_HOME}/lib | sed 's/\.sh//g' | columnize 5
7z deploy jemalloc runtime-config time
array dir json runtime trap
audio docker net set url
aws file osx set user
bashmatic ftrace output settings util
brew gem pids shell-set vim
caller git-recurse-updat progress-bar ssh yaml
color git ruby subshell
db sedx run sym
At a high level, the following modules are provided, in order of importance:
One of the key parts of Bashmatic is the framework around running commands and reporting on their execution status.
The two most important functions in this framework are:
-
run.set-next [ option option … ]
-
run.set-all [ option option … ]
-
run "command"
The first two allow you to configure how the run
command behaves. The run.set-next
only affects the first invocation of run
. After that all runtime options revert to the defaults.
run.set-all
affects ALL run
invocations following it.
The following options can be passed to the run.set-next
and run.set-all
:
- abort-on-error
-
exits the script when the command fails.
- ask-on-error
-
interactively asks the user when the command fails.
- continue-on-error
-
prints a warning, and continues when the command fails.
- dry-run-on
-
turns dry-run on
- dry-run-off
-
turns dry-run off
- on-decline-exit
-
when
run.ui.ask
is used and user says NO, exits the program. - on-decline-return
-
when
run.ui.ask
is used and user says NO, returns from the function.
- show-command-on
-
shows the command being executed
- show-command-off
-
silently executes the command
- show-output-off
-
swallows command’s STDOUT, but prints STDERR on error
- show-output-on
-
prints STDOUT of the command as it executes
For example:
❯ run.set-next show-output-off; run "ls -1 | wc -l"; run.set-next show-output-on; run "ls -1 | wc -l";
✔︎ ❯ ls -1 | wc -l ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪〔 74 ms 〕 0
# Command below will be shown with its output:
❯ ls -1 | wc -l
17
✔︎ ▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪▪〔 80 ms 〕 0
The following files provide this functionality:
-
lib/run.sh
-
lib/runtime.sh
-
lib/runtime-config.sh
.
These collectively offer the following functions:
$ bashmatic.functions-from 'run*'
run run.set-next
run.config.detail-is-enabled run.set-next.list
run.config.verbose-is-enabled run.ui.ask
run.inspect run.ui.ask-user-value
run.inspect-variable run.ui.get-user-value
run.inspect-variables run.ui.press-any-key
run.inspect-variables-that-are run.ui.retry-command
run.inspect.set-skip-false-or-blank run.variables-ending-with
run.on-error.ask-is-enabled run.variables-starting-with
run.print-variable run.with.minimum-duration
run.print-variables run.with.ruby-bundle
run.set-all run.with.ruby-bundle-and-output
run.set-all.list
Using these functions you can write powerful shell scripts that display each command they run, it’s status, duration, and can abort on various conditions. You can ask the user to confirm, and you can show a user message and wait for any key pressed to continue.
NOTE, in the following examples we assume you installed the library into your project’s folder as
.bashmatic
(a "hidden" folder starting with a dot).
Programming style used in this project lends itself nicely to using a DSL-like approach to shell programming. For example, in order to configure the behavior of the run-time framework (see below) you would run the following command:
#!/usr/bin/env bash
# (See below on the location of .bashmatic and ways to install it)
source ${BASHMATIC_HOME}/init.sh
# configure global behavior of all run() invocations
run.set-all abort-on-error show-output-off
run "git clone https://gthub.com/user/rails-repo rails"
run "cd rails"
run "bundle check || bundle install"
# the following configuration only applies to the next invocation of `run()`
# and then resets back to `off`
run.set-next show-output-on
run "bundle exec rspec"
And most importantly, you can use our fancy UI drawing routines to communicate with the user, which are based on familiar HTML constructs, such as h1
, h2
, hr
, etc.
A large chunk of Bashmatic is devoted to printing pretty dialogs and controlling the output of program execution.
The lib/output.sh
module does all of the heavy lifting with providing many UI elements, such as frames, boxes, lines, headers, and many more.
Here is the list of functions in this module:
$ bashmatic.functions-from output 3
abort error: left-prefix
ascii-clean h.black ok
box.blue-in-green h.blue okay
box.blue-in-yellow h.green output.color.off
box.green-in-cyan h.red output.color.on
box.green-in-green h.yellow output.is-pipe
box.green-in-magenta h1 output.is-redirect
box.green-in-yellow h1.blue output.is-ssh
box.magenta-in-blue h1.green output.is-terminal
box.magenta-in-green h1.purple output.is-tty
box.red-in-magenta h1.red puts
box.red-in-red h1.yellow reset-color
box.red-in-yellow h2 reset-color:
box.yellow-in-blue h2.green screen-width
box.yellow-in-red h3 screen.height
box.yellow-in-yellow hdr screen.width
br hl.blue shutdown
center hl.desc stderr
columnize hl.green stdout
command-spacer hl.orange success
cursor.at.x hl.subtle test-group
cursor.at.y hl.white-on-orange ui.closer.kind-of-ok
cursor.down hl.white-on-salmon ui.closer.kind-of-ok:
cursor.left hl.yellow ui.closer.not-ok
cursor.rewind hl.yellow-on-gray ui.closer.not-ok:
cursor.right hr ui.closer.ok:
cursor.up hr.colored warn
debug inf warning
duration info warning:
err info:
error left
Note that some function names end with :
– this indicates that the function outputs a new-line in the end. These functions typically exist together with their non-:
-terminated counter-parts. If you use one, eg, inf
, you are then supposed to finish the line by providing an additional output call, most commonly it will be one of ok:
, ui.closer.not-ok:
and ui.closer.kind-of-ok:
.
Here is an example:
function valid-cask() { sleep 1; return 0; }
function verify-cask() {
inf "verifying brew cask ${1}...."
if valid-cask ${1}; then
ok:
else
not-ok:
fi
}
When you run this, you should see something like this:
$ verify-cask TextMate
✔︎ verifying brew cask TextMate....
In the above example, you see the checkbox appear to the left of the text. In fact, it appears a second after, right as sleep 1
returns. This is because this paradigm is meant for wrapping constructs that might succeed or fail.
If we change the valid-cask
function to return a failure:
function valid-cask() { sleep 1; return 1; }
Then this is what we’d see:
$ verify-cask TextMate
✘ verifying brew cask TextMate....
Components are BASH functions that draw something concrete on the screen. For instance, all functions starting with box.
are components, as are h1
, h2
, hr
, br
and more.
$ h1 Hello
┌───────────────────┐
│ Hello │
└───────────────────┘
These are often named after HTML elements, such as hr
, h1
, h2
, etc.
Here is another example where we are deciding whether to print something based on whether the output is a proper terminal (and not a pipe or redirect):
output.is-tty && h1 "Yay For Terminals!" output.has-stdin && echo "We are being piped into..."
The above reads more like a high level language like Ruby or Python than Shell. That’s because BASH is more powerful than most people think.
There is an example script that demonstrates the capabilities of Bashmatic.
If you ran the script, you should see the output shown in this screenshot. Your colors may vary depending on what color scheme and font you use for your terminal.
You can reliably install ruby gems or brew packages with the following syntax:
#!/usr/bin/env bash
source ${BASHMATIC_HOME}/init.sh
h2 "Installing ruby gem sym and brew package curl..."
gem.install sym
brew.install.package curl
success "installed Sym version $(gem.version sym)"
When you run the above script, you shyould seee the following output:
You can shorten URLs on the command line using Bitly, but for this to work, you must set the following environment variables in your shell init:
export BITLY_LOGIN="<your login>"
export BITLY_API_KEY="<your api key>"
Then you can run it like so:
$ url.shorten https://raw.githubusercontent.com/kigster/bashmatic/main/bin/install
# http://bit.ly/2IIPNE1
There are a couple of Github-specific helpers:
github.clone github.setup
github.org github.validate
For instance:
$ github.clone sym
✘ Validating Github Configuration...
Please enter the name of your Github Organization:
$ kigster
Your github organization was saved in your ~/.gitconfig file.
To change it in the future, run:
$ github.org <org-name>
✔︎ $ git clone [email protected]:kigster/sym ▪▪▪▪▪▪〔 931 ms 〕
$ bashmatic.functions-from file
file.exists_and_newer_than file.list.filter-non-empty
file.gsub file.size
file.install-with-backup file.size.mb
file.last-modified-date file.source-if-exists
file.last-modified-year file.stat
file.list.filter-existing
For instance, file.stat
offers access to the fstat()
C-function:
$ file.stat README.md st_size
22799
$ bashmatic.functions-from array
array.to.bullet-list array.includes
array.has-element array.includes-or-exit
array.to.csv array.from.stdin
array-join array.join
array-piped array.to.piped-list
array.includes-or-complain
For instance:
$ declare -a farm_animals=(chicken duck rooster pig)
$ array.to.bullet-list ${farm_animals[@]}
• chicken
• duck
• rooster
• pig
$ array.includes "duck" "${farm_animals[@]}" && echo Yes || echo No
Yes
$ array.includes "cow" "${farm_animals[@]}" && echo Yes || echo No
No
The utilities module has the following functions:
$ bashmatic.functions-from util
pause.long util.install-direnv
pause util.is-a-function
pause.short util.is-numeric
pause.medium util.is-variable-defined
util.append-to-init-files util.lines-in-folder
util.arch util.remove-from-init-files
util.call-if-function util.shell-init-files
shasum.sha-only util.shell-name
shasum.sha-only-stdin util.ver-to-i
util.functions-starting-with util.whats-installed
util.generate-password watch.ls-al
For example, version helpers can be very handy in automated version detection, sorting and identifying the latest or the oldest versions:
$ util.ver-to-i '12.4.9'
112004009
$ util.i-to-ver $(util.ver-to-i '12.4.9')
12.4.9
Ruby Version Helpers and Ruby Gem Helpers, that can extract curren gem version from either Gemfile.lock
or globally installed gem list.
Additional Ruby helpers abound:
$ bashmatic.functions-from ruby
bundle.gems-with-c-extensions ruby.install-ruby-with-deps
interrupted ruby.install-upgrade-bundler
ruby.bundler-version ruby.installed-gems
ruby.compiled-with ruby.kigs-gems
ruby.default-gems ruby.linked-libs
ruby.full-version ruby.numeric-version
ruby.gemfile-lock-version ruby.rbenv
ruby.gems ruby.rubygems-update
ruby.gems.install ruby.stop
ruby.gems.uninstall ruby.top-versions
ruby.init ruby.top-versions-as-yaml
ruby.install ruby.validate-version
ruby.install-ruby
From the obvious ruby.install-ruby <version>
to incredibly useful ruby.top-versions <platform>
– which, using rbenv and ruby_build plugin, returns the most recent minor version of each major version upgrade, as well as the YAML version that allows you to pipe the output into your .travis.yml
to test against each major version of Ruby, locked to the very latest update in each.
$ ruby.top-versions
2.0.0-p648
2.1.10
2.2.10
2.3.8
2.4.9
2.5.7
2.6.5
2.7.0
2.8.0-dev
$ ruby.top-versions jruby
jruby-1.5.6
jruby-1.6.8
jruby-1.7.27
jruby-9.0.5.0
jruby-9.1.17.0
jruby-9.2.10.0
$ ruby.top-versions mruby
mruby-dev
mruby-1.0.0
mruby-1.1.0
mruby-1.2.0
mruby-1.3.0
mruby-1.4.1
mruby-2.0.1
mruby-2.1.0
These are fun helpers to assist in scripting gem management.
$ bashmatic.functions-from gem
g-i gem.gemfile.version
g-u gem.global.latest-version
gem.cache-installed gem.global.versions
gem.cache-refresh gem.install
gem.clear-cache gem.is-installed
gem.configure-cache gem.uninstall
gem.ensure-gem-version gem.version
For instance
$ g-i awesome_print
✔︎ gem awesome_print (1.8.0) is already installed
$ gem.version awesome_print
1.8.0
You can discover the audio and video functions using bashmatic.functions
helper:
❯ bashmatic.functions 1 | egrep -i 'video|audio'
audio.dir.mp3-to-wav
audio.dir.rename-karaoke-wavs
audio.dir.rename-wavs
audio.file.frequency
audio.file.mp3-to-wav
audio.make.mp3
audio.make.mp3.usage
audio.make.mp3s
video-squeeze
video.convert.compress
These commands auto-install ffmpeg and other utilities, and then use best in class compression. For instance, here is 80% compressed video file:
There are plenty more modules, that help with:
-
AWS helpers – requires
awscli
and credentials setup, and offers some helpers to simplify AWS management. -
Docker Helpers – assist with docker image building and pushing/pulling
And many more.
See the full function index with the function implementation body in the FUNCTIONS.adoc index.
The following example is the actual code from a soon to be integrated AWS credentials install script. This code below checks that a user has a local ~/.aws/credentials
file needed by the awscli
, and in the right INI format. If it doesn’t find it, it checks for the access key CSV file in the ~/Downloads
folder, and converts that if found. Now, if even that is not found, it prompts the user with instructions on how to generate a new key pair on AWS IAM website, and download it locally, thereby quickly converting and installing it as a proper credentials file. Not bad, for a compact BASH script, right? (of course, you are not seeing all of the involved functions, only the public ones).
# define a new function in AWS namespace, related to credentials.
# name of the function is self-explanatory: it validates credentials
# and exits if they are invalid.
aws.credentials.validate-or-exit() {
aws.credentials.are-valid || {
aws.credentials.install-if-missing || bashmatic.exit-or-return 1
}
}
aws.credentials.install-if-missing() {
aws.credentials.are-present || { # if not present
aws.access-key.is-present || aws.access-key.download # attempt to download the key
aws.access-key.is-present && aws.credentials.check-downloads-folder # attempt to find it in ~/Downloads
}
aws.credentials.are-present || { # final check after all attempts to install credentials
error "Unable to find AWS credentials. Please try again." && bashmatic.exit-or-return 1
}
bashmatic.exit-or-return 0
}
Now, how would you use it in a script? Let’s say you need a script to upload something to AWS S3. But before you begin, wouldn’t it be nice to verify that the credentials exist, and if not – help the user install it? Yes it would.
And that is exactly what the code above does, but it looks like a DSL. because it is a DSL.
This script could be your bin/s3-uploader
aws.credentials.validate-or-exit
# if we are here, that means that AWS credentials have been found.
# and we can continue with our script.
Some bash files exists as libraries to be "sourced in", and others exist as scripts to be run. But users won’t always know what is what, and may try to source in a script that should be run, or vice versa - run a script that should be sourced in.
What do you, programmer, do to educate the user about correct usage of your script/library?
Bashmatic® offers a reliable way to test this:
#!/usr/bin/env bash
# load library
if [[ -f "${Bashmatic__Init}" ]]; then source "${Bashmatic__Init}"; else source ${BASHMATIC_HOME}/init.sh; fi
bashmatic.validate-subshell || return 1
If you’rather require a library to be sourced in, but not run, use the code as follows:
#!/usr/bin/env bash
# load library
if [[ -f "${Bashmatic__Init}" ]]; then source "${Bashmatic__Init}"; else source ${BASHMATIC_HOME}/init.sh; fi
bashmatic.validate-sourced-in || exit 1
If you are stuck working on a monitor that does not support switching digit input from TV to PC, NOR does OS-X show the "underscan" slider in the Display Preferences, you may be forced to change the underscan manually. The process is a bit tricky, but we have a helpful script to do that:
$ source init.sh
$ change-underscan 5
This will reduce underscan by 5% compared to the current value. The total value is 10000, and is stored in the file /var/db/.com.apple.iokit.graphics
. The tricky part is determining which of the display entries map to your problem monitor. This is what the script helps with.
Do not forget to restart after the change.
Acknowledgements: the script is an automation of the method offered on this blog post.
Please submit a pull request or at least an issue!
The framework comes with a bunch of automated unit tests based on the fantastic framework bats
.
Bats is auto-installed by the bin/specs
script.
We use Bats framework for testing, however we provided a convenient wrapper bin/specs
which installs Bats and its dependencies so that we don’t have to worry about installing it manually.
The script can be run:
-
Without any arguments to run all tests in the
test
folder in parallel by default -
You can pass one or more existing test file paths as arguments, eg
bin/specs test/time_test.bats
-
Finally, you can pass an abbreviated test file name — eg "time" will resolve to
test/time_test.bats
The script accepts a bunch of CLI arguments and flags shown below:
By the default, bin/spec
runs tests in parallel, and takes about 20 seconds.
If you pass the -P/--no-parallel
flag, it will run sequentially and take about twice as long.
Below is the screenshot of the tests running in the parallel mode. The script automatically detects that my machine has 16 CPU cores and uses this as a parallization factor.
Note that you can run all tests in parallel using the following make target:
make test
While not every single function is tested (far from it), we do try to add tests to the critical ones.
Please see existing tests for the examples.