- Important Note
- Why do we need the new Async Blynk_Async_WM library
- Why do we need this Blynk_WM library
- Changelog
- Prerequisites
- Installation
- Note for Platform IO using ESP32 LittleFS
- HOWTO Use analogRead() with ESP32 running WiFi and/or BlueTooth (BT/BLE)
- How to use
- HOWTO use default Credentials and have them pre-loaded onto Config Portal
- 1. To load Default Credentials
- 2. To use system default to load "blank" when there is no valid Credentials
- 3. Example of Default Credentials
- 4. How to add dynamic parameters from sketch
- 5. If you don't need to add dynamic parameters
- 6. To use custom HTML Style
- 7. To use custom Head Elements
- 8. To use CORS Header
- 9. To use and input only one set of WiFi SSID and PWD
- 10. To enable auto-scan of WiFi networks for selection in Configuration Portal
- Important Notes for using Dynamic Parameters' ids
- Important Notes
- Why using this Blynk_WiFiManager with MultiWiFi-MultiBlynk features
- Examples
- 1. AM2315_ESP32_SSL
- 2. AM2315_ESP8266
- 3. DHT11ESP32
- 4. DHT11ESP32_SSL
- 5. DHT11ESP8266
- 6. DHT11ESP8266_Debug
- 7. DHT11ESP8266_SSL
- 8. ESP32WM_Config
- 9. ESP8266WM_Config
- 10. Blynk_WM_Template
- 11. ESP32WM_MRD_Config
- 12. ESP8266WM_MRD_Config
- 13. ESP32WM_ForcedConfig
- 14. ESP8266WM_ForcedConfig
- 15. ESP32WM_MRD_ForcedConfig
- 16. ESP8266WM_MRD_ForcedConfig
- So, how it works?
- Example ESP32WM_MRD_ForcedConfig
- Debug Terminal Output Samples
- 1. ESP8266WM_MRD_Config using LittleFS with SSL on ESP8266_NODEMCU
- 2. DHT11ESP8266_SSL using LittleFS with SSL on ESP8266_NODEMCU
- 3. ESP32WM_MRD_Config using LITTLEFS without SSL on ESP32_DEV
- 4. DHT11ESP32_SSL using LittleFS with SSL on ESP32_DEV
- 5. ESP8266WM_MRD_ForcedConfig using non-persistent ConfigPortal virtual button
- 6. ESP8266WM_MRD_ForcedConfig using persistent ConfigPortal virtual button
- 7. ESP8266WM_MRD_ForcedConfig using LITTLEFS with SSL on ESP8266_NODEMCU
- 8. ESP32WM_MRD_Config using LITTLEFS with SSL on ESP32S2_DEV
- 9. ESP32WM_MRD_ForcedConfig using LITTLEFS with SSL on ESP32_DEV to demo WiFi Scan
- 10. ESP8266WM_MRD_Config using LITTLEFS with SSL on ESP8266_NODEMCU_ESP12E using new ESP8266 core v3.0.2
- Debug
- Troubleshooting
- Issues
- TO DO
- DONE
- Contributions and Thanks
- Contributing
- License
- Copyright
This Blynk_WiFiManager has just been modified to create the new Blynk_Async_WM in order to use the better and more efficient ESPAsyncWebServer Library, instead of the (ESP8266)WebServer library.
The new Blynk_Async_WM is based on and sync'ed with Blynk_WiFiManager. Therefore, all the features currently supported by this Blynk_WiFiManager will be available to the new library. The code change is to port to the new library is also very negligible, mostly just changing the include file from BlynkSimpleEspxxxx_WM.h to BlynkSimpleEspxxxx_Async_WM.h.
Why do we need the new Async Blynk_Async_WM library
- Using asynchronous network means that you can handle more than one connection at the same time
- You are called once the request is ready and parsed
- When you send the response, you are immediately ready to handle other connections while the server is taking care of sending the response in the background
- Speed is OMG
- Easy to use API, HTTP Basic and Digest MD5 Authentication (default), ChunkedResponse
- Easily extensible to handle any type of content
- Supports Continue 100
- Async WebSocket plugin offering different locations without extra servers or ports
- Async EventSource (Server-Sent Events) plugin to send events to the browser
- URL Rewrite plugin for conditional and permanent url rewrites
- ServeStatic plugin that supports cache, Last-Modified, default index and more
- Simple template processing engine to handle templates
Why do we need this Blynk_WM library
This is a Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime. Connection is with or without SSL. Configuration data to be saved in either LittleFS, SPIFFS or EEPROM. Default Credentials as well as Dynamic custom parameters can be added and modified easily without coding knowledge. DoubleResetDetector is used to force Config Portal opening even if the Credentials are still valid.
This library is designed to help you to eliminate hardcoding your Wifi and Blynk credentials for ESP8266 and ESP32 (with/without SSL), and updating/reflashing every time you need to change them.
With version v1.6.0 or later, you can use:
New ESP8266 core v3.0.0
With version v1.1.0 or later, you can use:
LittleFS for ESP32Multiple Reset Detection to enter Config Portal
With version v1.0.7 or later, you can configure:
Multiple WiFi Credentials (SSID, Password) and system will autoconnect to the best and available WiFi SSID.Multiple Blynk Credentials (Server, Token) and system will autoconnect to the available Blynk Servers.
With version v1.0.5 or later, you can configure:
Config Portal Static IP address, Name and Password.Static IP address, Gateway, Subnet Mask and 2 DNS Servers IP addresses.
This Blynk_WM library currently supports these following boards:
- ESP8266 and ESP32-based boards using EEPROM, SPIFFS or LittleFS.
- ESP32-S2 (ESP32-S2 Saola, AI-Thinker ESP-12K, etc.) using EEPROM, SPIFFS or LittleFS.
- ESP32-C3 (ARDUINO_ESP32C3_DEV) using EEPROM or SPIFFS.
Arduino IDE 1.8.16Blynk library 1.0.1.. Never use the
Blynk betaversions.ESP32 Core 2.0.0for ESP32-based boards.ESP8266 Core 3.0.2for ESP8266-based boards.. To use ESP8266 core 2.7.1 for LittleFS.
ESP_DoubleResetDetector library 1.1.1to use DRD feature. To install, check.
ESP_MultiResetDetector library 1.1.1to use MRD feature. To install, check.
LittleFS_esp32 v1.0.6for ESP32-based boards using LittleFS. To install, check. Notice: This
LittleFS_esp32 libraryhas been integrated to Arduino esp32 core v1.0.6 .
- Be certain you have installed the most up to date version of Arduino IDE.
- Be certain you have installed the most up-to-date Blynk library.
- Using Arduino IDE,
-
either use the zip file
- Navigate to the Blynk_WiFiManager page in Github.
- Download the latest release of
Blynk_WM-master.zipand save to your hard drive. - Open Arduino IDE.
- Menu: Sketch->Include Library->Add .ZIP library…
- Select the downloaded
Blynk_WM-master.zipfile - Hit Open
- Once Arduino IDE is finished installing the library, EXIT Arduino IDE.
-
or use Arduino IDE's Library Manager
- Open Arduino IDE.
- Menu: Tools->Manage Libraries…
- Wait for library list to populate.
- Search for the keyword "Blynk". Find Blynk_WiFiManager in the library list.
- Select the latest version of the Blynk_WiFiManager library.
- Hit Install.
- Once Arduino IDE is finished installing the library, EXIT Arduino IDE.
- COPY the /certs files from the main Blynk library to the Blynk_WiFiManager library.
- Find the
Blynk/src/certslibrary directory. (This is in the main Blynk library, may be named differently.) - Find the
Blynk_WiFiManager/src/certslibrary directory. (This is in the installed Blynk_WiFiManager library, may be named differently.) Using Arduino IDE, these directories are normally found under .../Arduino/Sketchbook/libraries or .../Arduino/libraries.- (Sometimes Arduino IDE names a library folder with an unhelpful name like Arduino_12345. You can safely rename that folder under …/libraries/ to a compliant name like Blynk_WiFiManager for convenience. Remember to exit and restart IDE after renaming any library directory.)
- COPY (do not cut and paste) the entire contents of the
Blynk/src/certsdirectory to theBlynk_WiFiManager/src/certsdirectory.- (FYI: the reason for copying the certs from the Blynk library to Blynk_WiFiManager library is so that Blynk_WiFiManager will have access to Blynk's SSL certificates. And you almost certainly want to be using SSL!)
- Find the
- You must do Step 4 each time you update the Blynk_WiFiManager library to keep those SSL certs accessible.
- Open Arduino IDE. Your library is installed.
- Install VS Code
- Install PlatformIO
- Install Blynk_WM library by using Library Manager. Search for Blynk_WM in Platform.io Author's Libraries
- Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File
From esp32 core v1.0.6 , LittleFS_esp32 v1.0.6 has been included and this step is not necessary anymore.
In Platform IO, to fix the error when using LittleFS_esp32 v1.0 for ESP32-based boards with ESP32 core v1.0.4- (ESP-IDF v3.2-), uncomment the following line
from
//#define CONFIG_LITTLEFS_FOR_IDF_3_2 /* For old IDF - like in release 1.0.4 */
to
#define CONFIG_LITTLEFS_FOR_IDF_3_2 /* For old IDF - like in release 1.0.4 */
It's advisable to use the latest LittleFS_esp32 v1.0.5 to avoid the issue.
Thanks to Roshan to report the issue in Error esp_littlefs.c 'utime_p'
Please have a look at ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to have more detailed description and solution of the issue.
- ADC1 controls ADC function for pins GPIO32-GPIO39
- ADC2 controls ADC function for pins GPIO0, 2, 4, 12-15, 25-27
Look in file adc_common.c
In ADC2, there're two locks used for different cases:
lock shared with app and Wi-Fi: ESP32: When Wi-Fi using the ADC2, we assume it will never stop, so app checks the lock and returns immediately if failed. ESP32S2: The controller's control over the ADC is determined by the arbiter. There is no need to control by lock.
lock shared between tasks: when several tasks sharing the ADC2, we want to guarantee all the requests will be handled. Since conversions are short (about 31us), app returns the lock very soon, we use a spinlock to stand there waiting to do conversions one by one.
adc2_spinlock should be acquired first, then adc2_wifi_lock or rtc_spinlock.
- In order to use ADC2 for other functions, we have to acquire complicated firmware locks and very difficult to do
- So, it's not advisable to use ADC2 with WiFi/BlueTooth (BT/BLE).
- Use ADC1, and pins GPIO32-GPIO39
- If somehow it's a must to use those pins serviced by ADC2 (GPIO0, 2, 4, 12, 13, 14, 15, 25, 26 and 27), use the fix mentioned at the end of ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to work with ESP32 WiFi/BlueTooth (BT/BLE).
In your code, replace
-
BlynkSimpleEsp8266.hwithBlynkSimpleEsp8266_WM.hfor ESP8266without SSL -
BlynkSimpleEsp8266_SSL.hwithBlynkSimpleEsp8266_SSL_WM.hfor ESP8266with SSL -
BlynkSimpleEsp32.hwithBlynkSimpleEsp32_WM.hfor ESP32without SSL -
BlynkSimpleEsp32_SSL.hwithBlynkSimpleEsp32_SSL_WM.hfor ESP32with SSL -
For EP8266, add
#define USE_LITTLEFS true
#define USE_SPIFFS falseto use LittleFS or
#define USE_LITTLEFS false
#define USE_SPIFFS trueto use SPIFFS or
#define USE_LITTLEFS false
#define USE_SPIFFS falseto use EEPROM.
- For EP32, add
#define USE_LITTLEFS true
#define USE_SPIFFS falseto use LittleFS or
#define USE_LITTLEFS false
#define USE_SPIFFS trueto use SPIFFS or
#define USE_LITTLEFS false
#define USE_SPIFFS falseto use EEPROM.
Currently, data size in v1.1.0, with DRD/MRD and not including dynamic params, is 380 bytes from address EEPROM_START ) to save your configuration data.
EEPROM_SIZE can be specified from 512 to 4096 (2048 for ESP32) bytes.
See examples ESP32WM_Config and ESP8266WM_Config.
// Force some params in Blynk, only valid for library version 1.0.1 and later
#define TIMEOUT_RECONNECT_WIFI 10000L
#define RESET_IF_CONFIG_TIMEOUT true
#define CONFIG_TIMEOUT_RETRYTIMES_BEFORE_RESET 5To use personalized Config Portal AP SSID and Password, as well as IP Address, channel e.g. call :
// Set config portal SSID and Password
Blynk.setConfigPortal("TestPortal-ESP8266", "TestPortalPass");
// Set config portal IP address
Blynk.setConfigPortalIP(IPAddress(192, 168, 200, 1));
// Set config portal channel, default = 1. Use 0 => random channel from 1-13 to avoid conflict
Blynk.setConfigPortalChannel(0);You can specify STA-mode Static IP address, Gateway, Subnet Mask, as well as DNS server 1 and 2:
// From v1.0.5, select either one of these to set static IP
Blynk.setSTAStaticIPConfig(IPAddress(192, 168, 2, 220), IPAddress(192, 168, 2, 1), IPAddress(255, 255, 255, 0));
//Blynk.setSTAStaticIPConfig(IPAddress(192, 168, 2, 220), IPAddress(192, 168, 2, 1), IPAddress(255, 255, 255, 0),
// IPAddress(192, 168, 2, 1), IPAddress(8, 8, 8, 8));
//Blynk.setSTAStaticIPConfig(IPAddress(192, 168, 2, 220), IPAddress(192, 168, 2, 1), IPAddress(255, 255, 255, 0),
// IPAddress(4, 4, 4, 4), IPAddress(8, 8, 8, 8));Then replace Blynk.begin(...) with :
Blynk.begin()to use default DHCP hostnameESP8266-XXXXXXorESP32-XXXXXX
or to have a personalized hostname (RFC952-conformed,- 24 chars max,- only a..z A..Z 0..9 '-' and no '-' as last char)
Blynk.begin("Personalized-HostName")
in your code. Keep Blynk.run() intact.
That's it.
See this example and modify as necessary
1. To load Default Credentials
bool LOAD_DEFAULT_CONFIG_DATA = true;bool LOAD_DEFAULT_CONFIG_DATA = false;3. Example of Default Credentials
/// Start Default Config Data //////////////////
/*
// Defined in <BlynkSimpleEsp32_WM.h> and <BlynkSimpleEsp32_SSL_WM.h>
#define SSID_MAX_LEN 32
#define PASS_MAX_LEN 64
typedef struct
{
char wifi_ssid[SSID_MAX_LEN];
char wifi_pw [PASS_MAX_LEN];
} WiFi_Credentials;
#define BLYNK_SERVER_MAX_LEN 32
#define BLYNK_TOKEN_MAX_LEN 36
typedef struct
{
char blynk_server[BLYNK_SERVER_MAX_LEN];
char blynk_token [BLYNK_TOKEN_MAX_LEN];
} Blynk_Credentials;
#define NUM_WIFI_CREDENTIALS 2
#define NUM_BLYNK_CREDENTIALS 2
typedef struct Configuration
{
char header [16];
WiFi_Credentials WiFi_Creds [NUM_WIFI_CREDENTIALS];
Blynk_Credentials Blynk_Creds [NUM_BLYNK_CREDENTIALS];
int blynk_port;
char board_name [24];
int checkSum;
} Blynk_WM_Configuration;
*/
bool LOAD_DEFAULT_CONFIG_DATA = true;
//bool LOAD_DEFAULT_CONFIG_DATA = false;
Blynk_WM_Configuration defaultConfig =
{
//char header[16], dummy, not used
#if USE_SSL
"SSL",
#else
"NonSSL",
#endif
//WiFi_Credentials WiFi_Creds [NUM_WIFI_CREDENTIALS]
//WiFi_Creds.wifi_ssid and WiFi_Creds.wifi_pw
"SSID1", "password1",
"SSID2", "password2",
// Blynk_Credentials Blynk_Creds [NUM_BLYNK_CREDENTIALS];
// Blynk_Creds.blynk_server and Blynk_Creds.blynk_token
"account.ddns.net", "token",
"account.duckdns.org", "token1",
//int blynk_port;
#if USE_SSL
9443,
#else
8080,
#endif
//char board_name [24];
"Air-Control",
//int checkSum, dummy, not used
0
};
/////////// End Default Config Data /////////////- To add custom parameters, just modify the example below
#define USE_DYNAMIC_PARAMETERS true
/////////////// Start dynamic Credentials ///////////////
//Defined in <BlynkSimpleEsp32_WM.h> and <BlynkSimpleEsp32_SSL_WM.h>
/**************************************
#define MAX_ID_LEN 5
#define MAX_DISPLAY_NAME_LEN 16
typedef struct
{
char id [MAX_ID_LEN 1];
char displayName [MAX_DISPLAY_NAME_LEN 1];
char *pdata;
uint8_t maxlen;
} MenuItem;
**************************************/
#if USE_DYNAMIC_PARAMETERS
#define MAX_MQTT_SERVER_LEN 34
char MQTT_Server [MAX_MQTT_SERVER_LEN 1] = "default-mqtt-server";
#define MAX_MQTT_PORT_LEN 6
char MQTT_Port [MAX_MQTT_PORT_LEN 1] = "1883";
#define MAX_MQTT_USERNAME_LEN 34
char MQTT_UserName [MAX_MQTT_USERNAME_LEN 1] = "default-mqtt-username";
#define MAX_MQTT_PW_LEN 34
char MQTT_PW [MAX_MQTT_PW_LEN 1] = "default-mqtt-password";
#define MAX_MQTT_SUBS_TOPIC_LEN 34
char MQTT_SubsTopic [MAX_MQTT_SUBS_TOPIC_LEN 1] = "default-mqtt-SubTopic";
#define MAX_MQTT_PUB_TOPIC_LEN 34
char MQTT_PubTopic [MAX_MQTT_PUB_TOPIC_LEN 1] = "default-mqtt-PubTopic";
MenuItem myMenuItems [] =
{
{ "mqtt", "MQTT Server", MQTT_Server, MAX_MQTT_SERVER_LEN },
{ "mqpt", "Port", MQTT_Port, MAX_MQTT_PORT_LEN },
{ "user", "MQTT UserName", MQTT_UserName, MAX_MQTT_USERNAME_LEN },
{ "mqpw", "MQTT PWD", MQTT_PW, MAX_MQTT_PW_LEN },
{ "subs", "Subs Topics", MQTT_SubsTopic, MAX_MQTT_SUBS_TOPIC_LEN },
{ "pubs", "Pubs Topics", MQTT_PubTopic, MAX_MQTT_PUB_TOPIC_LEN },
};
uint16_t NUM_MENU_ITEMS = sizeof(myMenuItems) / sizeof(MenuItem); //MenuItemSize;
#else
MenuItem myMenuItems [] = {};
uint16_t NUM_MENU_ITEMS = 0;
#endif
/////// // End dynamic Credentials ///////////
Use the following code snippet in sketch
#define USE_DYNAMIC_PARAMETERS falseor
/////////////// Start dynamic Credentials ///////////////
MenuItem myMenuItems [] = {};
uint16_t NUM_MENU_ITEMS = 0;
/////// // End dynamic Credentials ///////////
const char NewCustomsStyle[] /*PROGMEM*/ = "<style>div,input{padding:5px;font-size:1em;}input{width:95%;}body{text-align: center;}\
button{background-color:blue;color:white;line-height:2.4rem;font-size:1.2rem;width:100%;}fieldset{border-radius:0.3rem;margin:0px;}</style>";
...
Blynk.setCustomsStyle(NewCustomsStyle);
Blynk.setCustomsHeadElement("<style>html{filter: invert(10%);}</style>");
Blynk.setCORSHeader("Your Access-Control-Allow-Origin");
// Permit input only one set of WiFi SSID/PWD. The other can be "NULL or "blank"
// Default is false (if not defined) => must input 2 sets of SSID/PWD
#define REQUIRE_ONE_SET_SSID_PW true
But it's always advisable to use and input both sets for reliability.
// Permit input only one set of WiFi SSID/PWD. The other can be "NULL or "blank"
// Default is false (if not defined) => must input 2 sets of SSID/PWD
#define REQUIRE_ONE_SET_SSID_PW false
#define SCAN_WIFI_NETWORKS true
The manual input of SSIDs is default enabled, so that users can input arbitrary SSID, not only from the scanned list. This is for the sample use-cases in which users can input the known SSIDs of another place, then send the boards to that place. The boards can connect to WiFi without users entering Config Portal to re-configure.
// To disable manually input SSID, only from a scanned SSID lists
#define MANUAL_SSID_INPUT_ALLOWED false
This is for normal use-cases in which users can only select an SSID from a scanned list of SSIDs to avoid typo mistakes and/or security.
The maximum number of SSIDs in the list is seletable from 2 to 15. If invalid number of SSIDs is selected, the default number of 10 will be used.
// From 2-15
#define MAX_SSID_IN_LIST 8
- These ids (such as "mqtt" in example) must be unique.
Please be noted that the following reserved names are already used in library:
"id" for WiFi SSID
"pw" for WiFi PW
"id1" for WiFi1 SSID
"pw1" for WiFi1 PW
"sv" for Blynk Server
"tk" for Blynk Token
"sv1" for Blynk Server1
"tk1" for Blynk Token1
"pt" for Blynk Port
"nm" for Board Name
- Now you can use special chars such as ~, !, @, #, $, %, ^, &, _, -, space,etc. thanks to brondolin to provide the amazing fix in v1.0.10 to permit input special chars such as % and # into data fields. See Issue 3.
- The SSIDs, Passwords, BlynkServers and Tokens must be input (or to make them different from nothing). Otherwise, the Config Portal will re-open until those fields have been changed. If you don't need any field, just input anything or use duplicated data from similar field.
- WiFi password max length now is 63 chars according to WPA2 standard.
- Sometimes, it's hard or not possible to connect to Config Portal WiFi AP, the majority cases are caused by WiFi channel conflict if there are too many WiFi APs running around. Please use random ConfigPortal WiFi AP channel in sketch (see code snippet below) and reset the board so that another channel is used. Repeat until connection is OK
// Set config portal channel, default = 1. Use 0 => random channel from 1-13 to avoid conflict
Blynk.setConfigPortalChannel(0);Why using this Blynk_WiFiManager with MultiWiFi-MultiBlynk features
You can see that the system automatically detects and connects to the best or avaiable WiFi APs and/or Blynk Servers, whenever interruption happens. This feature is very useful for systems requiring high degree of reliability.
Moreover, this Blynk.begin() is not a blocking call, so you can use it for critical functions requiring in loop().
Anyway, this is better for projects using Blynk just for GUI (graphical user interface).
In operation, if WiFi or Blynk connection is lost, Blynk.run() will try reconnecting automatically. Therefore, Blynk.run() must be called in the loop() function. Don't use:
void loop()
{
if (Blynk.connected())
Blynk.run();
...
}just
void loop()
{
Blynk.run();
...
}- AM2315_ESP32_SSL
- AM2315_ESP8266
- DHT11ESP32
- DHT11ESP32_SSL
- DHT11ESP8266
- DHT11ESP8266_Debug
- DHT11ESP8266_SSL
- ESP32WM_Config
- ESP8266WM_Config
- Blynk_WM_Template
- ESP32WM_MRD_Config
- ESP8266WM_MRD_Config
- ESP32WM_ForcedConfig
- ESP8266WM_ForcedConfig
- ESP32WM_MRD_ForcedConfig
- ESP8266WM_MRD_ForcedConfig
If it cannot connect to the Blynk server in 30 seconds, no valid stored Credentials or Double Reset is detected within 10s, it will switch to Configuration Mode. You will see your built-in LED turned ON. In Configuration Mode, it starts an AP with default name ESP_xxxxxx and password MyESP_xxxxxx or configurable name and password you specified. The AP IP address is default at 192.168.4.1 or configured IP (e.g. 192.168.200.1).
First, connect your (PC, Laptop, Tablet, phone, etc.) WiFi to Config Portal AP, then enter the WiFi password :
- If you choose not to load default Credentials and Dynamic Parameters
After you connected, please, go to http://192.168.4.1 or the configured AP IP. The following Config Portal screen will appear:
- If you choose to load default Credentials and Dynamic Parameters
After you connected, please, go to http://192.168.4.1 or the configured AP IP. The following Config Portal screen will appear:
Enter your WiFi and Blynk Credentials:
Then click Save. The system will auto-restart. You will see the board's built-in LED turned OFF. That means, it's already connected to your Blynk server successfully.
Example ESP32WM_MRD_ForcedConfig
1. File ESP32WM_MRD_ForcedConfig.ino
#include "defines.h"
#include "Credentials.h"
#include "dynamicParams.h"
#include <Ticker.h>
#include <DHT.h> // https://github.com/adafruit/DHT-sensor-library
DHT dht(DHT_PIN, DHT_TYPE);
BlynkTimer timer;
Ticker led_ticker;
#define BLYNK_PIN_FORCED_CONFIG V10
#define BLYNK_PIN_FORCED_PERS_CONFIG V20
// Use button V10 (BLYNK_PIN_FORCED_CONFIG) to forced Config Portal
BLYNK_WRITE(BLYNK_PIN_FORCED_CONFIG)
{
if (param.asInt())
{
Serial.println( F("\nCP Button Hit. Rebooting") );
// This will keep CP once, clear after reset, even you didn't enter CP at all.
Blynk.resetAndEnterConfigPortal();
delay ( 8000 );
ESP.restart();
}
}
// Use button V20 (BLYNK_PIN_FORCED_PERS_CONFIG) to forced Persistent Config Portal
BLYNK_WRITE(BLYNK_PIN_FORCED_PERS_CONFIG)
{
if (param.asInt())
{
Serial.println( F("\nPersistent CP Button Hit. Rebooting") );
// This will keep CP forever, until you successfully enter CP, and Save data to clear the flag.
Blynk.resetAndEnterConfigPortalPersistent();
delay ( 8000 );
ESP.restart();
}
}
void readAndSendData()
{
float temperature = dht.readTemperature();
float humidity = dht.readHumidity();
if (!isnan(temperature) && !isnan(humidity))
{
Blynk.virtualWrite(V17, String(temperature, 1));
Blynk.virtualWrite(V18, String(humidity, 1));
}
else
{
Blynk.virtualWrite(V17, "NAN");
Blynk.virtualWrite(V18, "NAN");
}
// Blynk Timer uses millis() and is still working even if WiFi/Blynk not connected
Serial.print(F("R"));
}
void set_led(byte status)
{
digitalWrite(LED_BUILTIN, status);
}
void heartBeatPrint()
{
static int num = 1;
if (Blynk.connected())
{
set_led(HIGH);
led_ticker.once_ms(111, set_led, (byte) LOW);
Serial.print(F("B"));
}
else
{
Serial.print(F("F"));
}
if (num == 80)
{
Serial.println();
num = 1;
}
else if (num % 10 == 0)
{
Serial.print(F(" "));
}
}
void check_status()
{
static unsigned long checkstatus_timeout = 0;
#define STATUS_CHECK_INTERVAL 60000L
// Send status report every STATUS_REPORT_INTERVAL (60) seconds: we don't need to send updates frequently if there is no status change.
if ((millis() > checkstatus_timeout) || (checkstatus_timeout == 0))
{
// report status to Blynk
heartBeatPrint();
checkstatus_timeout = millis() STATUS_CHECK_INTERVAL;
}
}
#if USING_CUSTOMS_STYLE
const char NewCustomsStyle[] /*PROGMEM*/ = "<style>div,input{padding:5px;font-size:1em;}input{width:95%;}body{text-align: center;}\
button{background-color:blue;color:white;line-height:2.4rem;font-size:1.2rem;width:100%;}fieldset{border-radius:0.3rem;margin:0px;}</style>";
#endif
void setup()
{
pinMode(LED_BUILTIN, OUTPUT);
// Debug console
Serial.begin(115200);
while (!Serial);
delay(200);
#if (USE_LITTLEFS)
Serial.print(F("\nStarting ESP32WM_MRD_ForcedConfig using LITTLEFS"));
#elif (USE_SPIFFS)
Serial.print(F("\nStarting ESP32WM_MRD_ForcedConfig using SPIFFS"));
#else
Serial.print(F("\nStarting ESP32WM_MRD_ForcedConfig using EEPROM"));
#endif
#if USE_SSL
Serial.print(F(" with SSL on ")); Serial.println(ARDUINO_BOARD);
#else
Serial.print(F(" without SSL on ")); Serial.println(ARDUINO_BOARD);
#endif
Serial.println(BLYNK_WM_VERSION);
#if USING_MRD
Serial.println(ESP_MULTI_RESET_DETECTOR_VERSION);
#else
Serial.println(ESP_DOUBLE_RESET_DETECTOR_VERSION);
#endif
dht.begin();
// From v1.0.5
// Set config portal SSID and Password
Blynk.setConfigPortal("TestPortal-ESP32", "TestPortalPass");
// Set config portal IP address
//Blynk.setConfigPortalIP(IPAddress(192, 168, 220, 1));
// Set config portal channel, default = 1. Use 0 => random channel from 1-13 to avoid conflict
Blynk.setConfigPortalChannel(0);
// From v1.0.5, select either one of these to set static IP DNS
Blynk.setSTAStaticIPConfig(IPAddress(192, 168, 2, 230), IPAddress(192, 168, 2, 1), IPAddress(255, 255, 255, 0));
//Blynk.setSTAStaticIPConfig(IPAddress(192, 168, 2, 220), IPAddress(192, 168, 2, 1), IPAddress(255, 255, 255, 0),
// IPAddress(192, 168, 2, 1), IPAddress(8, 8, 8, 8));
//Blynk.setSTAStaticIPConfig(IPAddress(192, 168, 2, 220), IPAddress(192, 168, 2, 1), IPAddress(255, 255, 255, 0),
// IPAddress(4, 4, 4, 4), IPAddress(8, 8, 8, 8));
//////////////////////////////////////////////
#if USING_CUSTOMS_STYLE
Blynk.setCustomsStyle(NewCustomsStyle);
#endif
#if USING_CUSTOMS_HEAD_ELEMENT
Blynk.setCustomsHeadElement("<style>html{filter: invert(10%);}</style>");
#endif
#if USING_CORS_FEATURE
Blynk.setCORSHeader("Your Access-Control-Allow-Origin");
#endif
//////////////////////////////////////////////
// Use this to default DHCP hostname to ESP8266-XXXXXX or ESP32-XXXXXX
//Blynk.begin();
// Use this to personalize DHCP hostname (RFC952 conformed)
// 24 chars max,- only a..z A..Z 0..9 '-' and no '-' as last char
//Blynk.begin("ESP32-WM-Config");
Blynk.begin(HOST_NAME);
timer.setInterval(60 * 1000, readAndSendData);
if (Blynk.connected())
{
#if (USE_LITTLEFS)
Serial.println(F("\nBlynk ESP32 using LittleFS connected"));
#elif (USE_SPIFFS)
Serial.println(F("\nBlynk ESP32 using SPIFFS connected."));
#else
Serial.println(F("\nBlynk ESP32 using EEPROM connected."));
Serial.printf("EEPROM size = %d bytes, EEPROM start address = %d / 0x%X\n", EEPROM_SIZE, EEPROM_START, EEPROM_START);
#endif
Serial.print(F("Board Name : ")); Serial.println(Blynk.getBoardName());
}
}
#if USE_DYNAMIC_PARAMETERS
void displayCredentials()
{
Serial.println(F("\nYour stored Credentials :"));
for (uint16_t i = 0; i < NUM_MENU_ITEMS; i )
{
Serial.print(myMenuItems[i].displayName);
Serial.print(F(" = "));
Serial.println(myMenuItems[i].pdata);
}
}
void displayCredentialsInLoop()
{
static bool displayedCredentials = false;
if (!displayedCredentials)
{
for (uint16_t i = 0; i < NUM_MENU_ITEMS; i )
{
if (!strlen(myMenuItems[i].pdata))
{
break;
}
if ( i == (NUM_MENU_ITEMS - 1) )
{
displayedCredentials = true;
displayCredentials();
}
}
}
}
#endif
void loop()
{
Blynk.run();
timer.run();
check_status();
#if USE_DYNAMIC_PARAMETERS
displayCredentialsInLoop();
#endif
}
2. File defines.h
/*
// To add something similar to this for ESP32-C3
#if CONFIG_IDF_TARGET_ESP32
const int8_t esp32_adc2gpio[20] = {36, 37, 38, 39, 32, 33, 34, 35, -1, -1, 4, 0, 2, 15, 13, 12, 14, 27, 25, 26};
#elif CONFIG_IDF_TARGET_ESP32S2
const int8_t esp32_adc2gpio[20] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20};
#elif CONFIG_IDF_TARGET_ESP32C3
const int8_t esp32_adc2gpio[20] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20};
#endif
*/
#ifndef defines_h
#define defines_h
#if !( defined(ESP32) )
#error This code is intended to run on the ESP32 platform! Please check your Tools->Board setting.
#elif ( ARDUINO_ESP32S2_DEV || ARDUINO_FEATHERS2 || ARDUINO_ESP32S2_THING_PLUS || ARDUINO_MICROS2 || \
ARDUINO_METRO_ESP32S2 || ARDUINO_MAGTAG29_ESP32S2 || ARDUINO_FUNHOUSE_ESP32S2 || \
ARDUINO_ADAFRUIT_FEATHER_ESP32S2_NOPSRAM )
#define BOARD_TYPE "ESP32-S2"
#elif ( ARDUINO_ESP32C3_DEV )
// https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-gpio.c
#warning ESP32-C3 boards not fully supported yet. Only SPIFFS and EEPROM OK. Tempo esp32_adc2gpio to be replaced
const int8_t esp32_adc2gpio[20] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20};
#define BOARD_TYPE "ESP32-C3"
#else
#define BOARD_TYPE "ESP32"
#endif
#define BLYNK_PRINT Serial
#define BLYNK_WM_DEBUG 3
#define USING_MRD true
#if USING_MRD
// These definitions must be placed before #include <ESP_MultiResetDetector.h> to be used
// Otherwise, default values (MRD_TIMES = 3, MRD_TIMEOUT = 10 seconds and MRD_ADDRESS = 0) will be used
// Number of subsequent resets during MRD_TIMEOUT to activate
#define MRD_TIMES 3
// Number of seconds after reset during which a subseqent reset will be considered a mlti reset.
#define MRD_TIMEOUT 10
// RTC/EEPPROM Address for the MultiResetDetector to use
#define MRD_ADDRESS 0
#define MULTIRESETDETECTOR_DEBUG true
#warning Using MultiResetDetector MRD
#else
// These definitions must be placed before #include <ESP_DoubleResetDetector.h> to be used
// Otherwise, default values (DRD_TIMEOUT = 10 seconds and DRD_ADDRESS = 0) will be used
// Number of subsequent resets during DRD_TIMEOUT to activate
// Number of seconds after reset during which a subseqent reset will be considered a mlti reset.
#define DRD_TIMEOUT 10
// RTC/EEPPROM Address for the DoubleResetDetector to use
#define DRD_ADDRESS 0
#define DOUBLERESETDETECTOR_DEBUG false
#warning Using DoubleResetDetector DRD
#endif
// Not use #define USE_LITTLEFS and #define USE_SPIFFS => using SPIFFS for configuration data in WiFiManager
// (USE_LITTLEFS == false) and (USE_SPIFFS == false) => using EEPROM for configuration data in WiFiManager
// (USE_LITTLEFS == true) and (USE_SPIFFS == false) => using LITTLEFS for configuration data in WiFiManager
// (USE_LITTLEFS == true) and (USE_SPIFFS == true) => using LITTLEFS for configuration data in WiFiManager
// (USE_LITTLEFS == false) and (USE_SPIFFS == true) => using SPIFFS for configuration data in WiFiManager
// Those above #define's must be placed before #include <BlynkSimpleEsp32_WFM.h>
#if ( ARDUINO_ESP32C3_DEV )
// Currently, ESP32-C3 only supporting SPIFFS and EEPROM. Will fix to support LittleFS
#define USE_LITTLEFS false
#define USE_SPIFFS true
#else
#define USE_LITTLEFS false
#define USE_SPIFFS false
#endif
#if !( USE_SPIFFS || USE_LITTLEFS)
// EEPROM_SIZE must be <= 2048 and >= CONFIG_DATA_SIZE (currently 172 bytes)
#define EEPROM_SIZE (2 * 1024)
// EEPROM_START CONFIG_DATA_SIZE must be <= EEPROM_SIZE
#define EEPROM_START 0
#endif
/////////////////////////////////////////////
// Add customs headers from v1.2.0
#define USING_CUSTOMS_STYLE true
#define USING_CUSTOMS_HEAD_ELEMENT true
#define USING_CORS_FEATURE true
/////////////////////////////////////////////
// Force some params in Blynk, only valid for library version 1.0.1 and later
#define TIMEOUT_RECONNECT_WIFI 10000L
#define RESET_IF_CONFIG_TIMEOUT true
#define CONFIG_TIMEOUT_RETRYTIMES_BEFORE_RESET 5
// Config Timeout 120s (default 60s)
#define CONFIG_TIMEOUT 120000L
#define USE_DYNAMIC_PARAMETERS true
/////////////////////////////////////////////
#define REQUIRE_ONE_SET_SSID_PW false
#define SCAN_WIFI_NETWORKS true
// To be able to manually input SSID, not from a scanned SSID lists
#define MANUAL_SSID_INPUT_ALLOWED true
// From 2-15
#define MAX_SSID_IN_LIST 8
/////////////////////////////////////////////
// Those above #define's must be placed before #include <BlynkSimpleEsp32_WM.h> and <BlynkSimpleEsp32_SSL_WM.h>
//////////////////////////////////////////
#define USE_SSL true
//#define USE_SSL false
#if USE_SSL
#include <BlynkSimpleEsp32_SSL_WM.h>
#else
#include <BlynkSimpleEsp32_WM.h>
#endif
#define PIN_D22 22 // Pin D22 mapped to pin GPIO22/SCL of ESP32
#define DHT_PIN PIN_D22 // pin DATA @ D22 / GPIO22
#define DHT_TYPE DHT11
#define HOST_NAME "ESP32-Master-Controller"
#endif //defines_h3. File Credentials.h
#ifndef Credentials_h
#define Credentials_h
/// Start Default Config Data //////////////////
/*
// Defined in <BlynkSimpleEsp32_WM.h> and <BlynkSimpleEsp32_SSL_WM.h>
#define SSID_MAX_LEN 32
#define PASS_MAX_LEN 64
typedef struct
{
char wifi_ssid[SSID_MAX_LEN];
char wifi_pw [PASS_MAX_LEN];
} WiFi_Credentials;
#define BLYNK_SERVER_MAX_LEN 32
#define BLYNK_TOKEN_MAX_LEN 36
typedef struct
{
char blynk_server[BLYNK_SERVER_MAX_LEN];
char blynk_token [BLYNK_TOKEN_MAX_LEN];
} Blynk_Credentials;
#define NUM_WIFI_CREDENTIALS 2
#define NUM_BLYNK_CREDENTIALS 2
typedef struct Configuration
{
char header [16];
WiFi_Credentials WiFi_Creds [NUM_WIFI_CREDENTIALS];
Blynk_Credentials Blynk_Creds [NUM_BLYNK_CREDENTIALS];
int blynk_port;
char board_name [24];
int checkSum;
} Blynk_WM_Configuration;
*/
//bool LOAD_DEFAULT_CONFIG_DATA = true;
bool LOAD_DEFAULT_CONFIG_DATA = false;
Blynk_WM_Configuration defaultConfig =
{
//char header[16], dummy, not used
#if USE_SSL
"SSL",
#else
"NonSSL",
#endif
//WiFi_Credentials WiFi_Creds [NUM_WIFI_CREDENTIALS]
//WiFi_Creds.wifi_ssid and WiFi_Creds.wifi_pw
"SSID1", "password1",
"SSID2", "password2",
// Blynk_Credentials Blynk_Creds [NUM_BLYNK_CREDENTIALS];
// Blynk_Creds.blynk_server and Blynk_Creds.blynk_token
"account.ddns.net", "token",
"account.duckdns.org", "token1",
//int blynk_port;
#if USE_SSL
9443,
#else
8080,
#endif
//char board_name [24];
"Air-Control",
//int checkSum, dummy, not used
0
};
/////////// End Default Config Data /////////////
#endif //Credentials_h4. File dynamicParams.h
#ifndef dynamicParams_h
#define dynamicParams_h
// USE_DYNAMIC_PARAMETERS defined in defined.h
/////////////// Start dynamic Credentials ///////////////
//Defined in <BlynkSimpleEsp32_WM.h> and <BlynkSimpleEsp32_SSL_WM.h>
/**************************************
#define MAX_ID_LEN 5
#define MAX_DISPLAY_NAME_LEN 16
typedef struct
{
char id [MAX_ID_LEN 1];
char displayName [MAX_DISPLAY_NAME_LEN 1];
char *pdata;
uint8_t maxlen;
} MenuItem;
**************************************/
#if USE_DYNAMIC_PARAMETERS
#define MAX_MQTT_SERVER_LEN 34
char MQTT_Server [MAX_MQTT_SERVER_LEN 1] = "default-mqtt-server";
#define MAX_MQTT_PORT_LEN 6
char MQTT_Port [MAX_MQTT_PORT_LEN 1] = "1883";
#define MAX_MQTT_USERNAME_LEN 34
char MQTT_UserName [MAX_MQTT_USERNAME_LEN 1] = "default-mqtt-username";
#define MAX_MQTT_PW_LEN 34
char MQTT_PW [MAX_MQTT_PW_LEN 1] = "default-mqtt-password";
#define MAX_MQTT_SUBS_TOPIC_LEN 34
char MQTT_SubsTopic [MAX_MQTT_SUBS_TOPIC_LEN 1] = "default-mqtt-SubTopic";
#define MAX_MQTT_PUB_TOPIC_LEN 34
char MQTT_PubTopic [MAX_MQTT_PUB_TOPIC_LEN 1] = "default-mqtt-PubTopic";
MenuItem myMenuItems [] =
{
{ "mqtt", "MQTT Server", MQTT_Server, MAX_MQTT_SERVER_LEN },
{ "mqpt", "Port", MQTT_Port, MAX_MQTT_PORT_LEN },
{ "user", "MQTT UserName", MQTT_UserName, MAX_MQTT_USERNAME_LEN },
{ "mqpw", "MQTT PWD", MQTT_PW, MAX_MQTT_PW_LEN },
{ "subs", "Subs Topics", MQTT_SubsTopic, MAX_MQTT_SUBS_TOPIC_LEN },
{ "pubs", "Pubs Topics", MQTT_PubTopic, MAX_MQTT_PUB_TOPIC_LEN },
};
uint16_t NUM_MENU_ITEMS = sizeof(myMenuItems) / sizeof(MenuItem); //MenuItemSize;
#else
MenuItem myMenuItems [] = {};
uint16_t NUM_MENU_ITEMS = 0;
#endif
/////// // End dynamic Credentials ///////////
#endif //dynamicParams_hThe following is the sample terminal output when running example ESP8266WM_MRD_Config on ESP8266_NODEMCU
Starting ESP8266WM_MRD_Config using LittleFS with SSL on ESP8266_NODEMCU
Blynk_WM SSL for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFD0002
multiResetDetectorFlag = 0xFFFD0002
lowerBytes = 0x0002, upperBytes = 0x0002
No multiResetDetected, number of times = 2
LittleFS Flag read = 0xFFFD0002
Saving config file...
Saving config file OK
[310] Hostname=8266-Master-Controller
[335] LoadCfgFile
[336] OK
[336] ======= Start Stored Config Data =======
[336] Hdr=SSL_ESP8266,BrdName=Air-Control
[336] SSID=HueNet1,PW=12345678
[338] SSID1=HueNet2,PW1=12345678
[341] Server=account.duckdns.org,Token=token1
[347] Server1=account.duckdns.org,Token1=token2
[353] Port=9443
[355] ======= End Config Data =======
[358] CCSum=0x36c8,RCSum=0x36c8
[365] LoadCredFile
[365] CrR:pdata=new-mqtt-server,len=34
[366] CrR:pdata=1883,len=6
[369] CrR:pdata=new-mqtt-username,len=34
[372] CrR:pdata=default-mqtt-password,len=34
[376] CrR:pdata=default-mqtt-SubTopic,len=34
[380] CrR:pdata=default-mqtt-PubTopic,len=34
[384] OK
[385] CrCCsum=0x2670,CrRCsum=0x2670
[388] Valid Stored Dynamic Data
[391] Hdr=SSL_ESP8266,BrdName=Air-Control
[395] SSID=HueNet1,PW=12345678
[398] SSID1=HueNet2,PW1=12345678
[401] Server=account.duckdns.org,Token=token1
[407] Server1=account.duckdns.org,Token1=token2
[413] Port=9443
[415] ======= End Config Data =======
[418] bg: noConfigPortal = true
[421] Connecting MultiWifi...
[6699] WiFi connected after time: 1
[6699] SSID: HueNet1, RSSI = -37
[6700] Channel: 2, IP address: 192.168.2.166
[6700] bg: WiFi OK. Try Blynk
[6701]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on NodeMCU
[22723] NTP time: Fri Jan 1 22:15:49 2021
[22724] BlynkArduinoClient.connect: Connecting to account.duckdns.org:9443
[23520] Certificate OK
[23528] Ready (ping: 4ms).
[23601] Connected to Blynk Server = account.duckdns.org, Token = token1
[23601] bg: WiFi Blynk OK
Blynk ESP8288 using LittleFS connected.
Board Name : Air-Control
Stop multiResetDetecting
Saving config file...
Saving config file OK
B
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
BBBBBB
Starting ESP8266WM_MRD_Config using LittleFS with SSL on ESP8266_NODEMCU
Blynk_WM SSL for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFC0003
multiResetDetectorFlag = 0xFFFC0003
lowerBytes = 0x0003, upperBytes = 0x0003
multiResetDetected, number of times = 3
Saving config file...
Saving config file OK
[299] Multi or Double Reset Detected
[299] Hostname=8266-Master-Controller
[328] LoadCfgFile
[328] OK
[328] ======= Start Stored Config Data =======
[328] Hdr=SSL_ESP8266,BrdName=Air-Control
[328] SSID=HueNet1,PW=12345678
[330] SSID1=HueNet2,PW1=12345678
[333] Server=account.duckdns.org,Token=token1
[339] Server1=account.duckdns.org,Token1=token2
[346] Port=9443
[347] ======= End Config Data =======
[351] CCSum=0x36c8,RCSum=0x36c8
[358] LoadCredFile
[358] CrR:pdata=new-mqtt-server,len=34
[359] CrR:pdata=1883,len=6
[361] CrR:pdata=new-mqtt-username,len=34
[365] CrR:pdata=default-mqtt-password,len=34
[369] CrR:pdata=default-mqtt-SubTopic,len=34
[373] CrR:pdata=default-mqtt-PubTopic,len=34
[377] OK
[378] CrCCsum=0x2670,CrRCsum=0x2670
[381] Valid Stored Dynamic Data
[384] Hdr=SSL_ESP8266,BrdName=Air-Control
[387] SSID=HueNet1,PW=12345678
[390] SSID1=HueNet2,PW1=12345678
[393] Server=account.duckdns.org,Token=token1
[399] Server1=account.duckdns.org,Token1=token2
[406] Port=9443
[407] ======= End Config Data =======
[411] bg: Stay forever in config portal.DRD/MRD detected
[2473]
stConf:SSID=TestPortal-ESP8266,PW=TestPortalPass
[2473] IP=192.168.200.1,ch=5
F
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
FFFFFRFFFF FFRF
The following is the sample terminal output when running example DHT11ESP8266_SSL on ESP8266_NODEMCU
Starting DHT11ESP8266_SSL using LittleFS with SSL on ESP8266_NODEMCU
Blynk_WM SSL for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_DoubleResetDetector v1.1.1
[293] Hostname=ESP8266-DHT11-SSL
[316] LoadCfgFile
[316] OK
[316] CCSum=0x36c8,RCSum=0x36c8
[320] LoadCredFile
[320] OK
[320] CrCCsum=0x2670,CrRCsum=0x2670
[320] Hdr=SSL_ESP8266,BrdName=Air-Control
[320] SSID=HueNet1,PW=12345678
[322] SSID1=HueNet2,PW1=12345678
[325] Server=account.duckdns.org,Token=token1
[331] Server1=account.duckdns.org,12345678=token2
[338] Port=9443
[339] ======= End Config Data =======
[343] Connecting MultiWifi...
[6619] WiFi connected after time: 1
[6620] SSID: HueNet1, RSSI = -32
[6620] Channel: 2, IP address: 192.168.2.166
[6620] bg: WiFi OK. Try Blynk
[6621]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on NodeMCU
[22644] NTP time: Fri Jan 1 21:13:34 2021
[22645] BlynkArduinoClient.connect: Connecting to account.duckdns.org:9443
[23405] Certificate OK
[23411] Ready (ping: 2ms).
[23485] Connected to Blynk Server = account.duckdns.org, Token = token1
[23485] bg: WiFi Blynk OK
Blynk ESP8288 using LittleFS connected.
Board Name : Air-Control
B
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
The following is the sample terminal output when running example ESP32WM_MRD_Config on ESP32_DEV
Starting ESP32WM_MRD_Config using LITTLEFS without SSL on ESP32_DEV
Blynk_WM for ESP32 v1.6.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[498] Hostname=ESP32-Master-Controller
[516] LoadCfgFile
[518] OK
[518] ======= Start Stored Config Data =======
[518] Hdr=ESP32,BrdName=ESP32_MRD
[518] SSID=HueNet1,PW=12345678
[518] SSID1=HueNet2,PW1=12345678
[523] Server=account.duckdns.org,Token=token1
[529] Server1=account.duckdns.org,Token1=token2
[535] Port=9443
[537] ======= End Config Data =======
[540] CCSum=0x336b,RCSum=0x336b
[555] LoadCredFile
[559] CrR:pdata=default-mqtt-server,len=34
[559] CrR:pdata=1883,len=6
[559] CrR:pdata=default-mqtt-username,len=34
[559] CrR:pdata=default-mqtt-password,len=34
[563] CrR:pdata=default-mqtt-SubTopic,len=34
[567] CrR:pdata=default-mqtt-PubTopic,len=34
[571] OK
[572] CrCCsum=0x29a6,CrRCsum=0x29a6
[575] Valid Stored Dynamic Data
[578] Hdr=ESP32,BrdName=ESP32_MRD
[581] SSID=HueNet1,PW=12345678
[584] SSID1=HueNet2,PW1=12345678
[587] Server=account.duckdns.org,Token=token1
[593] Server1=account.duckdns.org,Token1=token2
[600] Port=9443
[601] ======= End Config Data =======
[604] bg: noConfigPortal = true
[607] Connecting MultiWifi...
[6439] WiFi connected after time: 1
[6439] SSID:HueNet1,RSSI=-25
[6439] Channel:2,IP address:192.168.2.101
[6439] bg: WiFi OK. Try Blynk
[6440]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP32
[6453] BlynkArduinoClient.connect: Connecting to account.duckdns.org:8080
[6587] Ready (ping: 8ms).
[6655] Connected to Blynk Server = account.duckdns.org, Token = token1
[6655] bg: WiFi Blynk OK
Blynk ESP32 using LittleFS connected
Board Name : ESP32_MRD
B
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
Stop multiResetDetecting
Saving config file...
Saving config file OK
BBBBBB
Starting ESP32WM_MRD_Config using LITTLEFS without SSL on ESP32_DEV
Blynk_WM for ESP32 v1.6.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFC0003
multiResetDetectorFlag = 0xFFFC0003
lowerBytes = 0x0003, upperBytes = 0x0003
multiResetDetected, number of times = 3
Saving config file...
Saving config file OK
[280] Multi or Double Reset Detected
[352] Hostname=ESP32-Master-Controller
[391] LoadCfgFile
[396] OK
[396] ======= Start Stored Config Data =======
[397] Hdr=ESP32,BrdName=ESP32_MRD
[397] SSID=HueNet1,PW=12345678
[397] SSID1=HueNet2,PW1=12345678
[399] Server=account.duckdns.org,Token=token1
[405] Server1=account.duckdns.org,Token1=token2
[412] Port=9443
[413] ======= End Config Data =======
[416] CCSum=0x336b,RCSum=0x336b
[433] LoadCredFile
[438] CrR:pdata=default-mqtt-server,len=34
[438] CrR:pdata=1883,len=6
[438] CrR:pdata=default-mqtt-username,len=34
[438] CrR:pdata=default-mqtt-password,len=34
[441] CrR:pdata=default-mqtt-SubTopic,len=34
[445] CrR:pdata=default-mqtt-PubTopic,len=34
[449] OK
[450] CrCCsum=0x29a6,CrRCsum=0x29a6
[453] Valid Stored Dynamic Data
[456] Hdr=ESP32,BrdName=ESP32_MRD
[459] SSID=HueNet1,PW=12345678
[462] SSID1=HueNet2,PW1=12345678
[465] Server=account.duckdns.org,Token=token1
[471] Server1=account.duckdns.org,Token1=token2
[477] Port=9443
[479] ======= End Config Data =======
[482] bg: Stay forever in config portal.DRD/MRD detected
[1332]
stConf:SSID=TestPortal-ESP32,PW=TestPortalPass
[1332] IP=192.168.220.1,ch=10
F
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
ets Jun 8 2016 00:22:57
Starting ESP32WM_MRD_Config using LITTLEFS without SSL on ESP32_DEV
Blynk_WM for ESP32 v1.6.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[498] Hostname=ESP32-Master-Controller
[516] LoadCfgFile
[518] OK
[518] ======= Start Stored Config Data =======
[518] Hdr=ESP32,BrdName=ESP32_MRD
[518] SSID=HueNet1,PW=12345678
[518] SSID1=HueNet2,PW1=12345678
[523] Server=account.duckdns.org,Token=token1
[529] Server1=account.duckdns.org,Token1=token2
[535] Port=9443
[537] ======= End Config Data =======
[540] CCSum=0x336b,RCSum=0x336b
[555] LoadCredFile
[559] CrR:pdata=default-mqtt-server,len=34
[559] CrR:pdata=1883,len=6
[559] CrR:pdata=default-mqtt-username,len=34
[559] CrR:pdata=default-mqtt-password,len=34
[563] CrR:pdata=default-mqtt-SubTopic,len=34
[567] CrR:pdata=default-mqtt-PubTopic,len=34
[571] OK
[572] CrCCsum=0x29a6,CrRCsum=0x29a6
[575] Valid Stored Dynamic Data
[578] Hdr=ESP32,BrdName=ESP32_MRD
[581] SSID=HueNet1,PW=12345678
[584] SSID1=HueNet2,PW1=12345678
[587] Server=account.duckdns.org,Token=token1
[593] Server1=account.duckdns.org,Token1=token2
[600] Port=9443
[601] ======= End Config Data =======
[604] bg: noConfigPortal = true
[607] Connecting MultiWifi...
[6439] WiFi connected after time: 1
[6439] SSID:HueNet1,RSSI=-25
[6439] Channel:2,IP address:192.168.2.101
[6439] bg: WiFi OK. Try Blynk
[6440]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP32
[6453] BlynkArduinoClient.connect: Connecting to account.duckdns.org:8080
[6587] Ready (ping: 8ms).
[6655] Connected to Blynk Server = account.duckdns.org, Token = token1
[6655] bg: WiFi Blynk OK
Blynk ESP32 using LittleFS connected
Board Name : ESP32_MRD
B
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
Stop multiResetDetecting
Saving config file...
Saving config file OK
RBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB
RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRB
[3977051] run: WiFi lost. Reconnect WiFi Blynk
[3977051] Connecting MultiWifi...
[3984620] WiFi connected after time: 2
[3984620] SSID:HueNet2,RSSI=-53
[3984620] Channel:4,IP address:192.168.2.101
[3984620] run: WiFi reconnected. Connect to Blynk
[3984623]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP32
[3984637] BlynkArduinoClient.connect: Connecting to account.duckdns.org:8080
[3984791] Ready (ping: 6ms).
[3984859] Connected to Blynk Server = account.duckdns.org, Token = token1
[3984859] run: WiFi Blynk reconnected
RBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB
RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRBRBRBRB RBRBRBRBRBRBRB
[3977051] run: WiFi lost. Reconnect WiFi Blynk
[3977051] Connecting MultiWifi...
[3984620] WiFi connected after time: 2
[3984620] SSID:HueNet2,RSSI=-53
[3984620] Channel:4,IP address:192.168.2.101
[3984620] run: WiFi reconnected. Connect to Blynk
[3984623]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP32
[3984637] BlynkArduinoClient.connect: Connecting to account.duckdns.org:8080
[3984791] Ready (ping: 6ms).
[3984859] Connected to Blynk Server = account.duckdns.org, Token = token1
[3984859] run: WiFi Blynk reconnected
The following is the sample terminal output when running example DHT11ESP8266_SSL on ESP8266_NODEMCU
Starting DHT11ESP32_SSL using LITTLEFS with SSL on ESP32_DEV
Blynk_WM SSL for ESP32 v1.6.2
ESP_DoubleResetDetector v1.1.1
[346] Hostname=ESP32-DHT11-SSL
[385] LoadCfgFile
[391] OK
[391] CCSum=0x3657,RCSum=0x3657
[407] LoadCredFile
[412] OK
[412] CrCCsum=0x2670,CrRCsum=0x2670
[413] Hdr=SSL_ESP32,BrdName=Air-Control
[413] SSID=HueNet1,PW=12345678
[413] SSID1=HueNet2,PW1=12345678
[415] Server=account.duckdns.org,Token=token1
[421] Server1=account.duckdns.org,12345678=token2
[427] Port=9443
[429] ======= End Config Data =======
[432] Connecting MultiWifi...
[6349] WiFi connected after time: 1
[6349] SSID: HueNet1, RSSI = -27
[6349] Channel: 2, IP address: 192.168.2.101
[6349] bg: WiFi OK. Try Blynk
[6351]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP32
[7364] NTP time: Fri Jan 1 21:14:44 2021
[7364] BlynkArduinoClient.connect: Connecting to account.duckdns.org:9443
[9152] Certificate OK
[9160] Ready (ping: 7ms).
[9229] Connected to Blynk Server = account.duckdns.org, Token = token1
[9229] bg: WiFi Blynk OK
Blynk ESP32 using LittleFS connected
Board Name : Air-Control
B
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
The following is the sample terminal output when running example ESP8266WM_MRD_ForcedConfig on ESP8266_NODEMCU
The function to call is
// This will keep CP once, clear after reset, even you didn't enter CP at all.
Blynk.resetAndEnterConfigPortal();
Starting ESP8266WM_MRD_ForcedConfig using LittleFS without SSL on ESP8266_NODEMCU
Blynk_WM for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[293] Hostname=8266-Master-Controller
[302] LoadCfgFile
[303] OK
[303] ======= Start Stored Config Data =======
[303] Hdr=ESP8266,BrdName=Air-Control
[303] SSID=HueNet1,PW=12345678
[304] SSID1=HueNet2,PW1=12345678
[307] Server=account.duckdns.org,Token=token
[313] Server1=account.duckdns.org,Token1=token1
[320] Port=8080
[321] ======= End Config Data =======
[325] CCSum=0x351f,RCSum=0x351f
[329] LoadCredFile
[329] CrR:pdata=new-mqtt-server,len=34
[333] CrR:pdata=1883,len=6
[335] CrR:pdata=new-mqtt-username,len=34
[339] CrR:pdata=default-mqtt-password,len=34
[344] CrR:pdata=default-mqtt-SubTopic,len=34
[347] CrR:pdata=default-mqtt-PubTopic,len=34
[351] OK
[352] CrCCsum=0x2670,CrRCsum=0x2670
[355] Valid Stored Dynamic Data
[358] Hdr=ESP8266,BrdName=Air-Control
[361] SSID=HueNet1,PW=12345678
[364] SSID1=HueNet2,PW1=12345678
[367] Server=account.duckdns.org,Token=token
[373] Server1=account.duckdns.org,Token1=token1
[379] Port=8080
[381] ======= End Config Data =======
[384] Check if isForcedCP
[389] LoadCPFile
[389] OK
[389] bg: noConfigPortal = true
[392] Connecting MultiWifi...
[6648] WiFi connected after time: 1
[6648] SSID=HueNet1,RSSI=-37
[6648] Channel=2,IP=192.168.2.87
[6648] bg: WiFi OK. Try Blynk
[6648]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on NodeMCU
[6661] BlynkArduinoClient.connect: Connecting to account.duckdns.org:8080
[6765] Ready (ping: 7ms).
[6832] Connected to BlynkServer=account.duckdns.org,Token=token
[6832] bg: WiFi Blynk OK
Blynk ESP8266 using LittleFS connected.
Board Name : Air-Control
B
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
Stop multiResetDetecting
Saving config file...
Saving config file OK
BCP Button Hit. Rebooting
[19414] setForcedCP non-Persistent <========== Non-Persistent CP requested
[19419] SaveCPFile
[19423] OK
[19429] SaveBkUpCPFile
[19433] OK
Non-Persistent CP will be removed after first reset, even you didn't enter the CP. You can optionally enter CP, input and Save config data.
Starting ESP8266WM_MRD_ForcedConfig using LittleFS without SSL on ESP8266_NODEMCU
Blynk_WM for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[287] Hostname=8266-Master-Controller
[300] LoadCfgFile
[300] OK
[300] ======= Start Stored Config Data =======
[300] Hdr=ESP8266,BrdName=Air-Control
[300] SSID=HueNet1,PW=12345678
[302] SSID1=HueNet2,PW1=12345678
[305] Server=account.duckdns.org,Token=token
[311] Server1=account.duckdns.org,Token1=token1
[317] Port=8080
[319] ======= End Config Data =======
[322] CCSum=0x351f,RCSum=0x351f
[327] LoadCredFile
[327] CrR:pdata=new-mqtt-server,len=34
[330] CrR:pdata=1883,len=6
[333] CrR:pdata=new-mqtt-username,len=34
[336] CrR:pdata=default-mqtt-password,len=34
[341] CrR:pdata=default-mqtt-SubTopic,len=34
[344] CrR:pdata=default-mqtt-PubTopic,len=34
[348] OK
[349] CrCCsum=0x2670,CrRCsum=0x2670
[352] Valid Stored Dynamic Data
[355] Hdr=ESP8266,BrdName=Air-Control
[358] SSID=HueNet1,PW=12345678
[361] SSID1=HueNet2,PW1=12345678
[364] Server=account.duckdns.org,Token=token
[370] Server1=account.duckdns.org,Token1=token1
[377] Port=8080
[378] ======= End Config Data =======
[382] Check if isForcedCP
[387] LoadCPFile
[387] OK
[387] bg: isForcedConfigPortal = true
[390] bg:Stay forever in CP:Forced-non-Persistent <========== Non-Persistent CP will clear after reset
[394] clearForcedCP
[401] SaveCPFile
[405] OK
[411] SaveBkUpCPFile
[415] OK
[2467]
stConf:SSID=TestPortal-ESP8266,PW=TestPortalPass
[2467] IP=192.168.4.1,ch=7
F
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
Stop multiResetDetecting
Saving config file...
Saving config file OK
The following is the sample terminal output when running example ESP8266WM_MRD_ForcedConfig on ESP8266_NODEMCU
The function to call is
// This will keep CP once, clear after reset, even you didn't enter CP at all.
Blynk.resetAndEnterConfigPortalPersistent();
Starting ESP8266WM_MRD_ForcedConfig using LittleFS without SSL on ESP8266_NODEMCU
Blynk_WM for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[388] Hostname=8266-Master-Controller
[403] LoadCfgFile
[404] OK
[404] ======= Start Stored Config Data =======
[404] Hdr=ESP8266,BrdName=Air-Control
[404] SSID=HueNet1,PW=12345678
[405] SSID1=HueNet2,PW1=12345678
[408] Server=account.duckdns.org,Token=token
[414] Server1=account.duckdns.org,Token1=token1
[421] Port=8080
[422] ======= End Config Data =======
[426] CCSum=0x351f,RCSum=0x351f
[431] LoadCredFile
[431] CrR:pdata=new-mqtt-server,len=34
[434] CrR:pdata=1883,len=6
[436] CrR:pdata=new-mqtt-username,len=34
[440] CrR:pdata=default-mqtt-password,len=34
[444] CrR:pdata=default-mqtt-SubTopic,len=34
[448] CrR:pdata=default-mqtt-PubTopic,len=34
[452] OK
[453] CrCCsum=0x2670,CrRCsum=0x2670
[456] Valid Stored Dynamic Data
[459] Hdr=ESP8266,BrdName=Air-Control
[462] SSID=HueNet1,PW=12345678
[465] SSID1=HueNet2,PW1=12345678
[468] Server=account.duckdns.org,Token=token
[474] Server1=account.duckdns.org,Token1=token1
[480] Port=8080
[482] ======= End Config Data =======
[485] Check if isForcedCP
[490] LoadCPFile
[490] OK
[490] bg: noConfigPortal = true
[493] Connecting MultiWifi...
[6757] WiFi connected after time: 1
[6757] SSID=HueNet1,RSSI=-37
[6757] Channel=2,IP=192.168.2.87
[6757] bg: WiFi OK. Try Blynk
[6757]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on NodeMCU
[6770] BlynkArduinoClient.connect: Connecting to account.duckdns.org:8080
[6874] Ready (ping: 9ms).
[6941] Connected to BlynkServer=account.duckdns.org,Token=token
[6942] bg: WiFi Blynk OK
Blynk ESP8266 using LittleFS connected.
Board Name : Air-Control
B
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
Stop multiResetDetecting
Saving config file...
Saving config file OK
BPersistent CP Button Hit. Rebooting
[23500] setForcedCP Persistent <========== Persistent CP requested
[23507] SaveCPFile
[23513] OK
[23520] SaveBkUpCPFile
[23526] OK
Persistent CP will remain after resets. The only way to get rid of Config Portal is to enter CP, input (even fake data or none) and Save config data.
Starting ESP8266WM_MRD_ForcedConfig using LittleFS without SSL on ESP8266_NODEMCU
Blynk_WM for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_MultiResetDetector v1.1.1
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[292] Hostname=8266-Master-Controller
[310] LoadCfgFile
[310] OK
[310] ======= Start Stored Config Data =======
[310] Hdr=ESP8266,BrdName=Air-Control
[310] SSID=HueNet1,PW=12345678
[312] SSID1=HueNet2,PW1=12345678
[315] Server=account.duckdns.org,Token=token
[321] Server1=account.duckdns.org,Token1=token1
[327] Port=8080
[329] ======= End Config Data =======
[332] CCSum=0x351f,RCSum=0x351f
[339] LoadCredFile
[340] CrR:pdata=new-mqtt-server,len=34
[340] CrR:pdata=1883,len=6
[343] CrR:pdata=new-mqtt-username,len=34
[346] CrR:pdata=default-mqtt-password,len=34
[350] CrR:pdata=default-mqtt-SubTopic,len=34
[354] CrR:pdata=default-mqtt-PubTopic,len=34
[358] OK
[359] CrCCsum=0x2670,CrRCsum=0x2670
[362] Valid Stored Dynamic Data
[365] Hdr=ESP8266,BrdName=Air-Control
[368] SSID=HueNet1,PW=12345678
[371] SSID1=HueNet2,PW1=12345678
[374] Server=account.duckdns.org,Token=token
[380] Server1=account.duckdns.org,Token1=token1
[387] Port=8080
[388] ======= End Config Data =======
[392] Check if isForcedCP
[397] LoadCPFile
[398] OK
[398] bg: isForcedConfigPortal = true
[400] bg:Stay forever in CP:Forced-Persistent <========== Persistent CP will remain after reset
[697]
stConf:SSID=TestPortal-ESP8266,PW=TestPortalPass
[697] IP=192.168.4.1,ch=6
F
Your stored Credentials :
MQTT Server = new-mqtt-server
Port = 1883
MQTT UserName = new-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
Stop multiResetDetecting
Saving config file...
Saving config file OK
The following is the sample terminal output when running example ESP8266WM_MRD_ForcedConfig on ESP8266_NODEMCU. Please note that this fix the SSL issue with Blynk Cloud Server.
Starting ESP8266WM_MRD_ForcedConfig using LittleFS with SSL on ESP8266_NODEMCU
Blynk_WM SSL for ESP8266 v1.6.2
ESP8266 core v3.0.2
ESP_MultiResetDetector v1.1.1
[267] Set CustomsStyle to : <style>div,input{padding:5px;font-size:1em;}input{width:95%;}body{text-align: center;}button{background-color:blue;color:white;line-height:2.4rem;font-size:1.2rem;width:100%;}fieldset{border-radius:0.3rem;margin:0px;}</style>
[289] Set CustomsHeadElement to : <style>html{filter: invert(10%);}</style>
[296] Set CORS Header to : Your Access-Control-Allow-Origin
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[339] Hostname=8266-Master-Controller
[361] LoadCfgFile
[361] OK
[361] ======= Start Stored Config Data =======
[361] Hdr=SSL_ESP8266,BrdName=ESP8266
[361] SSID=HueNet1,PW=12345678
[363] SSID1=HueNet2,PW1=12345678
[366] Server=blynk-cloud.com,Token=token1
[372] Server1=blynk-cloud.com,Token1=token2
[378] Port=9443
[379] ======= End Config Data =======
[383] CCSum=0x2fa3,RCSum=0x2fa3
[390] LoadCredFile
[391] CrR:pdata=default-mqtt-server,len=34
[391] CrR:pdata=1883,len=6
[393] CrR:pdata=default-mqtt-username,len=34
[397] CrR:pdata=default-mqtt-password,len=34
[401] CrR:pdata=default-mqtt-SubTopic,len=34
[405] CrR:pdata=default-mqtt-PubTopic,len=34
[409] OK
[410] CrCCsum=0x29a6,CrRCsum=0x29a6
[413] Valid Stored Dynamic Data
[416] Hdr=SSL_ESP8266,BrdName=ESP8266
[420] SSID=HueNet1,PW=12345678
[423] SSID1=HueNet2,PW1=12345678
[425] Server=blynk-cloud.com,Token=token1
[431] Server1=blynk-cloud.com,Token1=token2
[438] Port=9443
[439] ======= End Config Data =======
[442] Check if isForcedCP
[450] LoadCPFile
[450] OK
[450] bg: noConfigPortal = true
[450] Connecting MultiWifi...
[6667] WiFi connected after time: 1
[6667] SSID: HueNet1, RSSI = -46
[6667] Channel: 2, IP address: 192.168.2.92
[6668] bg: WiFi OK. Try Blynk
[6669]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on NodeMCU
[22695] NTP time: Mon Apr 19 06:36:31 2021
[22695] BlynkArduinoClient.connect: Connecting to blynk-cloud.com:9443
[23153] Ready (ping: 1ms).
[23245] Connected to Blynk Server = blynk-cloud.com, Token = token1
[23245] bg: WiFi Blynk OK
Blynk ESP8266 using LittleFS connected.
Board Name : ESP8266
Stop multiResetDetecting
Saving config file...
Saving config file OK
B
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
BBBB
The following is the sample terminal output when running example ESP32WM_MRD_Config on ESP8266_NODEMCU. Please note that this fix the SSL issue with Blynk Cloud Server and runs on new ESP32-S2 using LittleFS using esp32 core v1.0.6 (not official release v1.0.6, but master release as of 2021/04/19).
Starting ESP32WM_MRD_Config using LITTLEFS with SSL on ESP32S2_DEV
Blynk_WM SSL for ESP32 v1.6.2
ESP_MultiResetDetector v1.1.1
[134394] Set CustomsStyle to : <style>div,input{padding:5px;font-size:1em;}input{width:95%;}body{text-align: center;}button{background-color:blue;color:white;line-height:2.4rem;font-size:1.2rem;width:100%;}fieldset{border-radius:0.3rem;margin:0px;}</style>
[134417] Set CustomsHeadElement to : <style>html{filter: invert(10%);}</style>
[134424] Set CORS Header to : Your Access-Control-Allow-Origin
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[134657] Hostname=ESP32-Master-Controller
[134695] LoadCfgFile
[134700] OK
[134700] ======= Start Stored Config Data =======
[134700] Hdr=SSL_ESP32,BrdName=ESP8266
[134700] SSID=HueNet1,PW=12345678
[134701] SSID1=HueNet2,PW1=12345678
[134704] Server=account.duckdns.org,Token=token1
[134710] Server1=account.duckdns.org,Token1=token2
[134717] Port=9443
[134719] ======= End Config Data =======
[134722] CCSum=0x33eb,RCSum=0x33eb
[134738] LoadCredFile
[134742] CrR:pdata=default-mqtt-server,len=34
[134743] CrR:pdata=1883,len=6
[134743] CrR:pdata=default-mqtt-username,len=34
[134743] CrR:pdata=default-mqtt-password,len=34
[134747] CrR:pdata=default-mqtt-SubTopic,len=34
[134751] CrR:pdata=default-mqtt-PubTopic,len=34
[134755] OK
[134756] CrCCsum=0x29a6,CrRCsum=0x29a6
[134760] Valid Stored Dynamic Data
[134763] Hdr=SSL_ESP32,BrdName=ESP8266
[134766] SSID=HueNet1,PW=12345678
[134769] SSID1=HueNet2,PW1=12345678
[134773] Server=account.duckdns.org,Token=token1
[134779] Server1=account.duckdns.org,Token1=token2
[134786] Port=9443
[134787] ======= End Config Data =======
[134791] Check if isForcedCP
[134806] LoadCPFile
[134811] OK
[134811] bg: noConfigPortal = true
[134811] Connecting MultiWifi...
[144534] WiFi connected after time: 1
[144534] SSID: HueNet1, RSSI = -38
[144534] Channel: 2, IP address: 192.168.2.157
[144535] bg: WiFi OK. Try Blynk
[144536]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP32
[145549] NTP time: Mon Apr 19 05:11:59 2021
[145549] BlynkArduinoClient.connect: Connecting to account.duckdns.org:9443
[146810] Certificate OK
[146826] Ready (ping: 15ms).
[146895] Connected to Blynk Server = account.duckdns.org, Token = token1
[146895] bg: WiFi Blynk OK
Blynk ESP32 using LittleFS connected
Board Name : ESP8266
Stop multiResetDetecting
Saving config file...
Saving config file OK
B
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
The following is the sample terminal output when running example ESP32WM_MRD_ForcedConfig on ESP32_DEV with WiFi Scan for selection in Configuration Portal.
Starting ESP32WM_MRD_ForcedConfig using LITTLEFS with SSL on ESP32_DEV
Blynk_WM SSL for ESP32 v1.6.2
ESP_MultiResetDetector v1.1.1
[228] Set CustomsStyle to : <style>div,input{padding:5px;font-size:1em;}input{width:95%;}body{text-align: center;}button{background-color:blue;color:white;line-height:2.4rem;font-size:1.2rem;width:100%;}fieldset{border-radius:0.3rem;margin:0px;}</style>
[250] Set CustomsHeadElement to : <style>html{filter: invert(10%);}</style>
[257] Set CORS Header to : Your Access-Control-Allow-Origin
LittleFS Flag read = 0xFFFC0003
multiResetDetectorFlag = 0xFFFC0003
lowerBytes = 0x0003, upperBytes = 0x0003
multiResetDetected, number of times = 3
Saving config file...
Saving config file OK
[332] Multi or Double Reset Detected
[488] Hostname=ESP32-Master-Controller
[558] LoadCfgFile
[571] OK
[571] ======= Start Stored Config Data =======
[571] Hdr=SSL_ESP32,BrdName=ESP8266
[571] SSID=HueNet1,PW=password
[571] SSID1=HueNet2,PW1=password
[574] Server=blynk-cloud.com,Token=token
[577] Server1=blynk-cloud.com,Token1=token2
[581] Port=9443
[583] ======= End Config Data =======
[586] CCSum=0x2185,RCSum=0x2185
[620] LoadCredFile
[632] CrR:pdata=default-mqtt-server,len=34
[632] CrR:pdata=1883,len=6
[632] CrR:pdata=default-mqtt-username,len=34
[632] CrR:pdata=default-mqtt-password,len=34
[635] CrR:pdata=default-mqtt-SubTopic,len=34
[639] CrR:pdata=default-mqtt-PubTopic,len=34
[643] OK
[644] CrCCsum=0x29a6,CrRCsum=0x29a6
[647] Valid Stored Dynamic Data
[650] Hdr=SSL_ESP32,BrdName=ESP8266
[653] SSID=HueNet1,PW=password
[656] SSID1=HueNet2,PW1=password
[659] Server=blynk-cloud.com,Token=token
[663] Server1=blynk-cloud.com,Token1=token2
[667] Port=9443
[668] ======= End Config Data =======
[671] Check if isForcedCP
[702] LoadCPFile
[713] OK
[713] bg: isForcedConfigPortal = false
[713] bg:Stay forever in CP:DRD/MRD
[713] clearForcedCP
[746] SaveCPFile
[758] OK
[790] SaveBkUpCPFile
[802] OK
[802] Scanning Network
[6310] scanWifiNetworks: Done, Scanned Networks n = 11
[6310] Sorting
[6310] Removing Dup
[6311] WiFi networks found:
[6312] 1: HueNet, -26dB
[6312] 2: HueNet1, -30dB
[6314] 3: HueNetTek, -32dB
[6316] 4: dragino-1ed63c, -35dB
[6319] 5: HueNet2, -57dB
[6322] 6: bacau, -68dB
[6324] 7: guest_24, -69dB
[6326] 8: rogers786, -87dB
[6328] 9: Rogers 786, -87dB
[6331] 10: Access 2.0, -92dB
[6334] 11: Family Room speaker.o, -96dB
[7197]
stConf:SSID=TestPortal-ESP32,PW=TestPortalPass
[7197] IP=192.168.4.1,ch=6
[7299] s:millis() = 7299, configTimeout = 127299
F
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
[19720] h: Init menuItemUpdated
[19863] h:mqtt=default-mqtt-server
[19863] h2:myMenuItems[0]=default-mqtt-server
[19877] h:mqpt=1883
[19877] h2:myMenuItems[1]=1883
[19891] h:user=default-mqtt-username
[19891] h2:myMenuItems[2]=default-mqtt-username
[19911] h:mqpw=default-mqtt-password
[19911] h2:myMenuItems[3]=default-mqtt-password
[19925] h:subs=default-mqtt-SubTopic
[19925] h2:myMenuItems[4]=default-mqtt-SubTopic
[19939] h:pubs=default-mqtt-PubTopic
[19939] h2:myMenuItems[5]=default-mqtt-PubTopic
[19942] h:Updating LittleFS:/wmssl_conf.dat
[19982] SaveCfgFile
[19982] WCSum=0x34ef
[19996] OK
[20173] SaveBkUpCfgFile
[20184] OK
[20217] SaveCredFile
[20217] CW1:pdata=default-mqtt-server,len=34
[20228] CW1:pdata=1883,len=6
[20228] CW1:pdata=default-mqtt-username,len=34
[20228] CW1:pdata=default-mqtt-password,len=34
[20228] CW1:pdata=default-mqtt-SubTopic,len=34
[20232] CW1:pdata=default-mqtt-PubTopic,len=34
[20237] OK
[20237] CrWCSum=0x29a6
[20275] SaveBkUpCredFile
[20276] CW2:pdata=default-mqtt-server,len=34
[20288] CW2:pdata=1883,len=6
[20288] CW2:pdata=default-mqtt-username,len=34
[20288] CW2:pdata=default-mqtt-password,len=34
[20288] CW2:pdata=default-mqtt-SubTopic,len=34
[20292] CW2:pdata=default-mqtt-PubTopic,len=34
[20297] OK
[20297] h:Rst
Starting ESP32WM_MRD_ForcedConfig using LITTLEFS with SSL on ESP32_DEV
Blynk_WM SSL for ESP32 v1.6.2
ESP_MultiResetDetector v1.1.1
[227] Set CustomsStyle to : <style>div,input{padding:5px;font-size:1em;}input{width:95%;}body{text-align: center;}button{background-color:blue;color:white;line-height:2.4rem;font-size:1.2rem;width:100%;}fieldset{border-radius:0.3rem;margin:0px;}</style>
[249] Set CustomsHeadElement to : <style>html{filter: invert(10%);}</style>
[256] Set CORS Header to : Your Access-Control-Allow-Origin
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[635] Hostname=ESP32-Master-Controller
[704] LoadCfgFile
[716] OK
[717] ======= Start Stored Config Data =======
[717] Hdr=SSL_ESP32,BrdName=ESP32-SSL
[717] SSID=HueNet,PW=password
[717] SSID1=HueNet1,PW1=password
[719] Server=account.duckdns.org,Token=token
[726] Server1=account.duckdns.org,Token1=token1
[732] Port=9443
[733] ======= End Config Data =======
[737] CCSum=0x34ef,RCSum=0x34ef
[768] LoadCredFile
[779] CrR:pdata=default-mqtt-server,len=34
[779] CrR:pdata=1883,len=6
[779] CrR:pdata=default-mqtt-username,len=34
[780] CrR:pdata=default-mqtt-password,len=34
[783] CrR:pdata=default-mqtt-SubTopic,len=34
[787] CrR:pdata=default-mqtt-PubTopic,len=34
[791] OK
[791] CrCCsum=0x29a6,CrRCsum=0x29a6
[795] Valid Stored Dynamic Data
[797] Hdr=SSL_ESP32,BrdName=ESP32-SSL
[801] SSID=HueNet,PW=password
[804] SSID1=HueNet1,PW1=password
[806] Server=account.duckdns.org,Token=token
[813] Server1=account.duckdns.org,Token1=token1
[819] Port=9443
[820] ======= End Config Data =======
[824] Check if isForcedCP
[858] LoadCPFile
[871] OK
[871] bg: noConfigPortal = true
[871] Connecting MultiWifi...
[19266] WiFi connected after time: 1
[19266] SSID: HueNet, RSSI = -29
[19266] Channel: 10, IP address: 192.168.2.45
[19267] bg: WiFi OK. Try Blynk
[19268]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP32
[20282] NTP time: Sun Apr 25 04:52:35 2021
[20282] BlynkArduinoClient.connect: Connecting to account.duckdns.org:9443
[22407] Certificate OK
[22412] Ready (ping: 4ms).
[22480] Connected to Blynk Server = account.duckdns.org, Token = token
[22480] bg: WiFi Blynk OK
Blynk ESP32 using LittleFS connected
Board Name : ESP32-SSL
Stop multiResetDetecting
Saving config file...
Saving config file OK
B
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
RBRBRBRBRBRBRBRB
10. ESP8266WM_MRD_Config using LITTLEFS with SSL on ESP8266_NODEMCU_ESP12E using new ESP8266 core v3.0.2
The following is the sample terminal output when running example ESP8266WM_MRD_Config on ESP8266_NODEMCU_ESP12E using new ESP8266 core v3.0.0
Starting ESP8266WM_MRD_Config using LittleFS with SSL on ESP8266_NODEMCU_ESP12E
ESP8266 core v3.0.2
Blynk_WM SSL for ESP8266 v1.6.2
ESP_MultiResetDetector v1.1.1
[274] Set CustomsStyle to : <style>div,input{padding:5px;font-size:1em;}input{width:95%;}body{text-align: center;}button{background-color:blue;color:white;line-height:2.4rem;font-size:1.2rem;width:100%;}fieldset{border-radius:0.3rem;margin:0px;}</style>
[296] Set CustomsHeadElement to : <style>html{filter: invert(10%);}</style>
[303] Set CORS Header to : Your Access-Control-Allow-Origin
LittleFS Flag read = 0xFFFE0001
multiResetDetectorFlag = 0xFFFE0001
lowerBytes = 0x0001, upperBytes = 0x0001
No multiResetDetected, number of times = 1
LittleFS Flag read = 0xFFFE0001
Saving config file...
Saving config file OK
[337] Hostname=8266-Master-Controller
[349] LoadCfgFile
[349] OK
[349] ======= Start Stored Config Data =======
[349] Hdr=SSL_ESP8266,BrdName=ESP32
[350] SSID=HueNet1,PW=password
[351] SSID1=HueNet2,PW1=password
[354] Server=account.duckdns.org,Token=token
[360] Server1=account.duckdns.org,Token1=token1
[366] Port=9443
[368] ======= End Config Data =======
[371] CCSum=0x3473,RCSum=0x3473
[376] LoadCredFile
[376] CrR:pdata=default-mqtt-server,len=34
[380] CrR:pdata=1883,len=6
[382] CrR:pdata=default-mqtt-username,len=34
[386] CrR:pdata=default-mqtt-password,len=34
[390] CrR:pdata=default-mqtt-SubTopic,len=34
[394] CrR:pdata=default-mqtt-PubTopic,len=34
[398] OK
[399] CrCCsum=0x29a6,CrRCsum=0x29a6
[402] Valid Stored Dynamic Data
[405] Hdr=SSL_ESP8266,BrdName=ESP32
[408] SSID=HueNet1,PW=password
[411] SSID1=HueNet2,PW1=password
[414] Server=account.duckdns.org,Token=token
[420] Server1=account.duckdns.org,Token1=token1
[426] Port=9443
[428] ======= End Config Data =======
[431] Check if isForcedCP
[436] LoadCPFile
[436] OK
[436] bg: noConfigPortal = true
[439] Connecting MultiWifi...
[5576] WiFi connected after time: 1
[5577] SSID: HueNet1, RSSI = -43
[5577] Channel: 2, IP address: 192.168.2.135
[5577] bg: WiFi OK. Try Blynk
[5578]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ \/ '_/
/____/_/\_, /_//_/_/\_\
/___/ v1.0.1 on ESP8266_NODEMCU_ESP12E
[6592] NTP time: Thu May 20 02:13:51 2021
[6624] BlynkArduinoClient.connect: Connecting to account.duckdns.org:9443
[7360] Certificate OK
[7387] Ready (ping: 20ms).
[7457] Connected to Blynk Server = account.duckdns.org, Token = token
[7458] bg: WiFi Blynk OK
Blynk ESP8288 using LittleFS connected.
Board Name : ESP8266
B
Your stored Credentials :
MQTT Server = default-mqtt-server
Port = 1883
MQTT UserName = default-mqtt-username
MQTT PWD = default-mqtt-password
Subs Topics = default-mqtt-SubTopic
Pubs Topics = default-mqtt-PubTopic
Stop multiResetDetecting
Saving config file...
Saving config file OK
BBBBBRBBBB BBRBBBBBBRBB BBBBRBBBBBB
Debug is enabled by default on Serial.
You can also change the debugging level from 0 to 4
#define BLYNK_PRINT Serial
#define BLYNK_WM_DEBUG 3
#define USING_MRD true
#if USING_MRD
#define MULTIRESETDETECTOR_DEBUG true
#else
#define DOUBLERESETDETECTOR_DEBUG false
#endifIf you get compilation errors, more often than not, you may need to install a newer version of the core for Arduino boards.
Sometimes, the library will only work if you update the board core to the latest version because I am using newly added functions.
Submit issues to: Blynk_WM issues
- Fix bug. Add enhancement
- Permit EEPROM size and location configurable to avoid conflict with others.
- More flexible to configure reconnection timeout.
- For fresh config data, don't need to wait for connecting timeout before entering config portal.
- If the config data not entered completely (SSID, password, Server and Blynk token), entering config portal
- Correct the operation of BUILTIN_LED
- Modify code to be compatible with ESP8266 core pre-2.5.2.
- Add RFC952 hostname
- Add configurable Config Portal IP, SSID and Password
- Add configurable Static IP, GW, Subnet Mask and 2 DNS Servers' IP Addresses.
- Add checksum for more reliable data
- Add MultiWiFi feature to enable reconnect to the best / available WiFi AP.
- Add MultiBlynk feature to enable reconnect to the best / available Blynk Server.
- WiFi Password max length is 63, as in WPA2 standards
- Permit to input special chars such as % and # into data fields.
- Add Dynamic Parameters with checksum
- Default Credentials and dynamic parameters
- DoubleDetectDetector to force Config Portal when double reset is detected within predetermined time, default 10s.
- Configurable Config Portal Title
- Re-structure all examples to separate Credentials / Defines / Dynamic Params / Code so that you can change Credentials / Dynamic Params quickly for each device.
- Add LittleFS support to ESP8266 as SPIFFS deprecated since ESP8266 core 2.7.1.
- Add LittleFS support to ESP32 using LITTLEFS Library.
- Add support to MultiDetectDetector and MRD-related examples
- Clean-up all compiler warnings possible.
- Add Table of Contents
- Add Version String
- Add functions to control Config Portal from software or Virtual Switches.
- Add support to ESP32-S2 (ESP32-S2 Saola, AI-Thinker ESP-12K, etc.) using EEPROM, LittleFS and SPIFFS
- Configurable Customs HTML Headers, including Customs Style, Customs Head Elements, CORS Header
- Add support to ESP32-C3 using EEPROM and SPIFFS
- Fix SSL issue with Blynk Cloud Server by using SSL in unsecured mode.
- Permit optionally inputting one set of WiFi SSID/PWD by using
REQUIRE_ONE_SET_SSID_PW == true - Enforce WiFi PWD minimum length of 8 chars
- Enable scan of WiFi networks for selection in Configuration Portal
- Drastically update code to work with either ESP8266 new breaking ESP8266 core v3.0.0 or old core ESP8266 v2.7.4-
- Make SSL working using
BearSSL, not deprecatedaxTLS
- Thanks to lorol for useful LittleFS_esp32 Library
- Thanks to chriskio to report AP-staying-open bug.
- Thanks to brondolin to provide the amazing fix in v1.0.10 to permit input special chars such as % and # into data fields. See Issue 3.
- Thanks to Thor Johnson and Thor Johnson in Blynk to test, find bug, suggest and encourage to add those new features in v1.0.13, such as Default Credentials/Dynamic Parms, Configurable Config Portal Title, DRD. The powerful Blynk_WM_Template is written by Thor Johnson and is included in the examples with his permission. Check these new features thanks to his direct contribution and/or enhancement requests :
- WM Config Portal using BlynkSimpleEsp32/8266_WM.h.
- How to trigger a Config Portal from code #25
- Good new feature: Blynk.resetAndEnterConfigPortal() Thanks & question #27
- Thanks to Thor Johnson and kevinleberge to help locate the bugs, discuss the USE_DEFAULT_CONFIG_DATA solution leading to release v1.0.16. See Can’t load defaults and Setting "#define USE_DYNAMIC_PARAMETERS false" on Blynk_WM_Template.ino results in compile error
- Thanks to komaneko to report bugs in Custom Blynk port not working for BlynkSimpleEsp32_Async_WM.h #4 leading to v1.3.1
- Thanks to Michael H. "bizprof". With the impressive new feature :
Enable scan of WiFi networks for selection in Configuration Portal. Check PR for v1.3.0 - Enable scan of WiFi networks #10 leading to v1.4.0
 ⭐️ lorol |
 chriskio |
 brondolin |
 ⭐️ Thor Johnson |
 kevinleberge |
 komaneko |
 ⭐️⭐️ Michael H. "bizprof" |
If you want to contribute to this project:
- Report bugs and errors
- Ask for enhancements
- Create issues and pull requests
- Tell other people about this library
- The library is licensed under MIT
Copyright 2020- Khoi Hoang
