To install this software, run:
gem install wifi-wand
or, you may need to precede that command with sudo:
sudo gem install wifi-wand
The wifi-wand gem enables the query and management
of WiFi configuration and environment on a Mac.
The code encapsulates the Mac OS specific logic in model classes
to more easily add support for other operating systems,
but as of now, only Mac OS is supported. (Feel free to add an OS!)
It can be run in single-command or interactive mode. Interactive mode uses the pry gem, providing an interface familiar to Rubyists and other REPL users.
Available commands can be seen by using the h (or help) option. Here is its
output at the time of this writing:
$ wifi-wand -h
Command Line Switches: [wifi-wand version 2.14.0 at https://github.com/keithrbennett/wifiwand]
-o {i,j,k,p,y} - outputs data in inspect, JSON, pretty JSON, puts, or YAML format when not in shell mode
-p wifi_interface_name - override automatic detection of interface name with this name
-s - run in shell mode
-v - verbose mode (prints OS commands and their outputs)
Commands:
a[vail_nets] - array of names of the available networks
ci - connected to Internet (not just wifi on)?
co[nnect] network-name - turns wifi on, connects to network-name
cy[cle] - turns wifi off, then on, preserving network selection
d[isconnect] - disconnects from current network, does not turn off wifi
f[orget] name1 [..name_n] - removes network-name(s) from the preferred networks list
in interactive mode, can be a single array of names, e.g. returned by `pref_nets`
h[elp] - prints this help
i[nfo] - a hash of wifi-related information
na[meservers] - nameservers: 'show' or no arg to show, 'clear' to clear,
or IP addresses to set, e.g. '9.9.9.9 8.8.8.8'
ne[twork_name] - name (SSID) of currently connected network
on - turns wifi on
of[f] - turns wifi off
pa[ssword] network-name - password for preferred network-name
pr[ef_nets] - preferred (saved) networks
q[uit] - exits this program (interactive shell mode only) (see also 'x')
ro[pen] - open resource ('cap' (Portal Logins), 'ipl' (IP Location), 'ipw' (What is My IP), 'libre' (LibreSpeed), 'spe' (Speed Test), 'this' (wifi-wand home page))
t[ill] - returns when the desired Internet connection state is true. Options:
1) 'on'/:on, 'off'/:off, 'conn'/:conn, or 'disc'/:disc
2) wait interval between tests, in seconds (optional, defaults to 0.5 seconds)
w[ifi_on] - is the wifi on?
x[it] - exits this program (interactive shell mode only) (see also 'q')
When in interactive shell mode:
* remember to quote string literals.
* for pry commands, use prefix `%`.
Internally, it uses several Mac command line utilities to interact with the underlying operating system.
For nicely formatted output of the info command in non-interactive mode,
the awesome_print gem is used if it is installed;
otherwise, the somewhat less awesome pretty print (pp) is used. Therefore,
installation of the awesome_print gem is recommended.
This is accomplished by the following command:
gem install awesome_print
You may need to precede this command with sudo , especially if you are using the
version of Ruby that comes packaged with MacOS.
You can specify that output in noninteractive mode be in a certain format. Currently, JSON, "Pretty" JSON, YAML, inspect, and puts formats are supported. See the help for which command line switches to use.
If you would like to see the Mac OS commands and their output, you can do so by specifying "-v" (for verbose) on the command line.
You may notice that some commands are executed more than once. This is to simplify the application logic and eliminate the need for the complexity of balancing the speed that a cache offers and the risk of stale data.
If you try to run the shell, the script will require the pry gem, so that will need to be installed.
pry in turn requires access to a readline library. If you encounter an error relating to finding a
readline library, this can probably be fixed by installing the pry-coolline gem: gem install pry-coolline.
If you are using the Ruby packaged with Mac OS, or for some other reason require root access to install
gems, you will need to precede those commands with sudo:
sudo gem install pry
sudo gem install pry-coolline
If the program immediately exits when you try to run the shell, try upgrading pry and pry-byebug.
This can be done by running gem install pry; gem install pry-byebug.
The shell, invoked with the -s switch on the command line, provides an interactive
session. It can be useful when:
- you want to issue multiple commands
- you want to combine commands
- you want the data in a format not provided by this application
- you want to incorporate these commands into other Ruby code interactively
- you want to combine the results of commands with other OS commands
(you can shell out to run other command line programs by preceding the command with a period (
.)) .
There are a couple of things (that may be surprising) to keep in mind when using the shell. They relate to the fact that local variables and method calls use the same notation in Ruby (since use of parentheses in a method call is optional):
- In Ruby, when both a method and a local variable have the same name, the local variable will override the method name. Therefore, local variables may override this app's commands. For example:
[1] pry(#<WifiWandView>)> n # network_name command
=> ".@ AIS SUPER WiFi"
[2] pry(#<WifiWandView>)> n = 123 # override it with a local variable
=> 123
[3] pry(#<WifiWandView>)> n # 'n' no longer calls the method
=> 123
[4] pry(#<WifiWandView>)> ne # but any other name that `network_name starts with will still call the method
=> ".@ AIS SUPER WiFi"
[5] pry(#<WifiWandView>)> network_name
=> ".@ AIS SUPER WiFi"
[6] pry(#<WifiWandView>)> ne_xzy123
"ne_xyz123" is not a valid command or option. If you intend for this to be a string literal, use quotes.
If you don't want to deal with this, you could use global variables, instance variables, or constants, which will not hide the methods:
[7] pry(#<WifiWandView>)> N = 123
[8] pry(#<WifiWandView>)> @n = 456
[9] pry(#<WifiWandView>)> $n = 789
[10] pry(#<WifiWandView>)> puts n, N, @n, $n
.@ AIS SUPER WiFi
123
456
789
=> nil
- If you accidentally refer to a nonexistent variable or method name, the result may be mysterious. For example, if I were write the WiFi information to a file, this would work:
[1] pry(#<WifiWandView>)> File.write('x', info)
=> 431
However, if I forget to quote the filename, the program exits:
[2] pry(#<WifiWandView>)> File.write(x, info)
➜ wifi-wand git:(master) ✗
What happened? x was assumed by Ruby to be a method name.
method_missing was called, and since x is the exit
command, the program exited.
Bottom line is, be careful to quote your strings, and you're probably better off using constants or instance variables if you want to create variables in your shell.
wifi-wand i # prints out wifi info
wifi-wand a # prints out names of available networks
wifi-wand pr # prints preferred networks
wifi-wand cy # cycles the wifi off and on
wifi-wand co a-network a-password # connects to a network requiring a password
wifi-wand co a-network # connects to a network _not_ requiring a password
wifi-wand t on && say "Internet connected" # Play audible message when Internet becomes connected
When in shell mode, commands generally return the target object (e.g. the array of
available networks) rather than outputting a nicely formatted string.
This is intentional, so that you can compose expressions and in general
have maximum flexibility. The result may be that pry displays
that returned value in an ugly way.
If you don't need the return value but just want to display the value nicely,
you can use the fancy_puts method to output it nicely. An alias fp has been
provided for your convenience. You're welcome! For example:
[5] pry(#<WifiWand::CommandLineInterface>)> fp pr.first(3)
[
[0] " AIS SMART Login",
[1] " BubblesLive",
[2] "#HKAirport Free WiFi"
]
For best display results, be sure awesome_print is gem installed.
The program will silently use a not-as-nice formatter without it.
(This silence is intentional, so that users who don't want to install
awesome-print will not be bothered.)
If you want to suppress output altogether (e.g. if you are using the value in an
expression and don't need to see it displayed,
you can simply append ;nil to the expression
and nil will be value output to the console. For example:
[10] pry(#<WifiWand::CommandLineInterface>)> available_networks = avail_nets; nil
=> nil
The code has been structured so that you can call the models from your own Ruby code, bypassing the command line interface. Here is an example of how to do that:
require 'wifi-wand'
model = WifiWand::MacOsModel.new
puts model.available_network_names.to_yaml # etc...More Examples
(For brevity, semicolons are used here to put multiple commands on one line, but these commands could also each be specified on a line of its own.)
# Print out WiFi info:
i
# Cycle (off/on) the network then connect to the specified network not requiring a password
> cycle; connect 'my-network'
# Cycle (off/on) the network, then connect to the same network not requiring a password
> @name = network_name; cycle; connect @name
# Cycle (off/on) the network then connect to the specified network using the specified password
> cycle; connect 'my-network', 'my-password'
> @i = i; puts "You are connected on port #{@i[:port]} to #{@i[:network]} on IP address #{@i[:ip_address]}."
You are connected on port en0 to .@ AIS SUPER WiFi on IP address 172.27.145.225.
> puts "There are #{pr.size} preferred networks."
There are 341 preferred networks.
# Delete all preferred networks whose names begin with "TOTTGUEST", the hard way:
> pr.grep(/^TOTTGUEST/).each { |n| forget(n) }
# Delete all preferred networks whose names begin with "TOTTGUEST", the easy way.
# 'forget' can take multiple network names,
# but they must be specified as separate parameters; thus the '*'.
> forget(*pr.grep(/^TOTTGUEST/))
# Define a method to wait for the Internet connection to be active.
# (This functionality is included in the `till` command.)
# Call it, then output celebration message:
[17] pry(#<WifiWandView>)> def wait_for_internet; loop do; break if ci; sleep 0.5; end; end
[18] pry(#<WifiWandView>)> wait_for_internet; puts "Connected!"
Connected!
# Same, but using a lambda instead of a method so we can use a variable name
# and not need to worry about method name collision:
@wait_for_internet = -> { loop do; break if ci; sleep 0.5; end }
@wait_for_internet.() ; puts "Connected!"
Connected!
Currently, no dependent gems are installed when this gem is installed. However, the program will use other gems as follows:
pry, when the interactive shell is requested with the-soptionawesome_print, if it is found, to more nicely format output in non-interactive mode
So the user can avoid installing gems other than this one altogether as long as they don't need to use the interactive shell, and as long as they are comfortable with the less pretty output.
The information hash will normally include information about the public IP address.
However, the command that provides this information, curl -s ipinfo.io, will sometimes
return this:
Rate limit exceeded. Subscribe to a paid plan to increase your usage limits
If this happens, the public IP information will be silently omitted from the
information hash. In this case, the web site 'https://www.iplocation.net/' is
recommended, and wifi-wand ro ipl on the command line or ro 'ipl' in the shell will
open that page in your browser for you.
You may find it odd (I did, anyway) that even if you issue the password command
(mac_wifi password a-network-name) using sudo, you will still be prompted
with a graphical dialog for both a user id and password. This is no doubt
for better security, but it's unfortunate in that it makes it impossible to fully automate this task.
In particular, it would be nice for the cycle command to be able to fetch the current network's
password, cycle the network, and then reconnect to the original network with it after turning the network on.
However, since fetching the password without user intervention is not possible, this cannot be automated.
If you don't mind storing the network password in plain text somewhere, then you could easily
automate it (e.g. wifi-wand cycle && wifi-wand connect a-network a-password). Also, you might find it handy
to create a script for your most commonly used networks containing something like this:
wifi-wand connect my-usual-network its-password
Starting in Mac OS version 14.4, the airport utility on which some of this project's
functionality relies has been disabled and will presumably eventually be removed.
The following tasks were restored by using Swift scripts:
- listing names of all available networks
- disconnecting from a network (with the added benefit that sudo access is no longer required)
The following tasks were restored by using networksetup:
- determining whether or not wifi is on
- the name of the currently connected network
The only remaining issue is that we were getting some extended information from airport for each available network. This extended information has now been removed in version 2.17.0.
In addition, the extended information about the available networks (ls_avail_nets) has been removed in version 2.17.0.
Apache 2 License (see LICENSE.txt)
Logo designed and generously contributed by Anhar Ismail (Github: @anharismail, Twitter: @aizenanhar).
I am available for consulting, development, tutoring, training, troubleshooting, etc.
You can contact me via GMail, Twitter, Github, and LinkedIn, as keithrbennett.