TCPI/IP network stack simulator implemented in C. The simulator implements Basic Layer 2 (MAC Addresses, Arp) and Layer 3 (Routing , IPs) functionality.
Implementation works with Linux and MacOS
- make >= 4.1 (Linux, Mac)
- Clone this repo.
- Make a build directory in the top level directory:
mkdir build && cd build - Compile:
make - Run it:
./test.
$./test
root@juniper> $ show topo saved 1
1 - Linear
----------- ----------- ----------- -----------
| |0/1 0/2| |0/3 0/4| |0/3 0/2| |
R0 ------------------------ R1 ------------------------- R2 ------------------------- R3
| |10.1.1.1/24 10.1.1.2/24| |20.1.1.2/24 20.1.1.1/24| |30.1.1.1/24 30.1.1.2/24| |
----------- ----------- ----------- -----------
root@juniper> $ config topo load 1
network receiver thread started for topology "Linear Topology"
Topology Loaded.
root@juniper> $ show node R0 interface
Interface Name : eth0/1 (IP Routed)
Nbr Node R1, Local Node : eth0/1 , cost = 1
IP Addr : 10.1.1.1(10.1.1.0/24 ) MAC : 62:86:8e:21:80:40
root@juniper> $ run node R1 ping 10.1.1.2
[send_ping_request] Sending 1 packets to 10.1.1.2
Node R1 : 12 bytes received from : icmp_seq=0 ttl=64