#*****************************************************************************************

#

# By [email protected]; [email protected]

#

# Generated by Vivado on Mon Jan 21 11:32:41 0100 2019

# IP Build 2095745 on Tue Jan 30 17:13:15 MST 2018

#

# This file contains the Vivado Tcl commands for re-creating the project to the state*

# when this script was generated. In order to re-create the project, please source this

# file in the Vivado Tcl Shell.

#

# * Note that the runs in the created project will be configured the same way as the

# original project, however they will not be launched automatically. To regenerate the

# run results please launch the synthesis/implementation runs as needed.

#

#

#*****************************************************************************************

#-----------process arguments (if exist)-------

# set argv [] before source this .tcl to not having any arguments

# set argv [list ARGUMENT1 ARGUMENT2 ...] to before source this .tcl to have arguments

# argument 1: BOARD_NAME

# argument 2: NUM_CLK_PER_US. For example: input 100 for 100MHz. Valid values: 100/200/240/400

# argument 3: IQ sample filename with full path (for SAMPLE_FILE in dot11_tb.v). Change it in pre_def.v according to your need later on.

# argument 4~7 (if exist): for `define OPENOFDM_RX_ARGUMENT in openofdm_rx_pre_def.v to enable some compiling time conditions

set ARGUMENT1 [lindex $argv 0]

set ARGUMENT2 [lindex $argv 1]

set ARGUMENT3 [lindex $argv 2]

set ARGUMENT4 [lindex $argv 3]

set ARGUMENT5 [lindex $argv 4]

set ARGUMENT6 [lindex $argv 5]

set ARGUMENT7 [lindex $argv 6]

if {$ARGUMENT1 eq ""} {

set BOARD_NAME zed_fmcs2

} else {

set BOARD_NAME $ARGUMENT1

}

if {$ARGUMENT2 eq ""} {

set NUM_CLK_PER_US 100

} else {

set NUM_CLK_PER_US $ARGUMENT2

}

source ./parse_board_name.tcl

set MODULE_NAME OPENOFDM_RX

set fd [open "./verilog/openofdm_rx_pre_def.v" w]

if {$NUM_CLK_PER_US == 100} {

puts $fd "`define CLK_SPEED_100M"

} elseif {$NUM_CLK_PER_US == 200} {

puts $fd "`define CLK_SPEED_200M"

} elseif {$NUM_CLK_PER_US == 240} {

puts $fd "`define CLK_SPEED_240M"

} elseif {$NUM_CLK_PER_US == 400} {

puts $fd "`define CLK_SPEED_400M"

} else {

throw {NUM_CLK_PER_US MUST BE 100/200/240/400!}

}

puts $fd "`define BETTER_SENSITIVITY"

if {$ARGUMENT3 eq ""} {

puts $fd "`define SAMPLE_FILE \"../../../../../testing_inputs/simulated/ht_mcs7_gi1_aggr0_len14_pre100_post200_openwifi.txt\""

} else {

puts $fd "`define SAMPLE_FILE \"$ARGUMENT3\""

}

if {$ARGUMENT4 eq ""} {

puts $fd " "

} else {

puts $fd "`define $MODULE_NAME\_$ARGUMENT4"

}

if {$ARGUMENT5 eq ""} {

puts $fd " "

} else {

puts $fd "`define $MODULE_NAME\_$ARGUMENT5"

}

if {$ARGUMENT6 eq ""} {

puts $fd " "

} else {

puts $fd "`define $MODULE_NAME\_$ARGUMENT6"

}

if {$ARGUMENT7 eq ""} {

puts $fd " "

} else {

puts $fd "`define $MODULE_NAME\_$ARGUMENT7"

}

close $fd

#-----end of process arguments (if exist)-------

puts "BOARD_NAME $BOARD_NAME"

puts "NUM_CLK_PER_US $NUM_CLK_PER_US"

puts "ultra_scale_flag $ultra_scale_flag"

puts "part_string $part_string"

puts "fpga_size_flag $fpga_size_flag"

puts "ARGUMENT3 $ARGUMENT3"

puts "ARGUMENT4 $MODULE_NAME\_$ARGUMENT4"

puts "ARGUMENT5 $MODULE_NAME\_$ARGUMENT5"

puts "ARGUMENT6 $MODULE_NAME\_$ARGUMENT6"

puts "ARGUMENT7 $MODULE_NAME\_$ARGUMENT7"

#------------some defines related to sub-IP---------------------

if {$ultra_scale_flag == 0} {

set ip_fix_string zynq

} else {

set ip_fix_string zynquplus

}

#-----end of some defines related to sub-IP---------------------

# -----------generate openofdm_rx_git_rev.v---------------

set fd [open "./verilog/openofdm_rx_git_rev.v" w]

set HASHCODE [exec ./get_git_rev.sh]

puts $fd "`define OPENOFDM_RX_GIT_REV (32'h$HASHCODE)"

close $fd

# ----end of generate openofdm_rx_git_rev.v---------------

# Set the reference directory for source file relative paths (by default the value is script directory path)

set origin_dir [file dirname [info script]]

#----------Copy the IP files to a dedicated/git-un-tracked ip_repo folder-----------------------

#----------because they will be changed during status reporting and upgrading at the end--------

file delete -force $origin_dir/ip_repo

file mkdir $origin_dir/ip_repo

file copy -force $origin_dir/verilog/coregen/div_gen_new_ip_core_$ip_fix_string $origin_dir/ip_repo/div_gen_new

exec cp -rf $origin_dir/verilog/Xilinx/$ip_fix_string/. $origin_dir/ip_repo/

#---end of copy---------------------------------------------------------------------------------

# Use origin directory path location variable, if specified in the tcl shell

if { [info exists ::origin_dir_loc] } {

set origin_dir $::origin_dir_loc

}

# Set the project name

set project_name "openofdm_rx"

exec rm -rf $project_name

# Use project name variable, if specified in the tcl shell

if { [info exists ::user_project_name] } {

set project_name $::user_project_name

}

variable script_file

set script_file "openofdm_rx.tcl"

# Help information for this script

proc help {} {

variable script_file

puts "\nDescription:"

puts "Recreate a Vivado project from this script. The created project will be"

puts "functionally equivalent to the original project for which this script was"

puts "generated. The script contains commands for creating a project, filesets,"

puts "runs, adding/importing sources and setting properties on various objects.\n"

puts "Syntax:"

puts "$script_file"

puts "$script_file -tclargs \[--origin_dir <path>\]"

puts "$script_file -tclargs \[--project_name <name>\]"

puts "$script_file -tclargs \[--help\]\n"

puts "Usage:"

puts "Name Description"

puts "-------------------------------------------------------------------------"

puts "\[--origin_dir <path>\] Determine source file paths wrt this path. Default"

puts " origin_dir path value is \".\", otherwise, the value"

puts " that was set with the \"-paths_relative_to\" switch"

puts " when this script was generated.\n"

puts "\[--project_name <name>\] Create project with the specified name. Default"

puts " name is the name of the project from where this"

puts " script was generated.\n"

puts "\[--help\] Print help information for this script"

puts "-------------------------------------------------------------------------\n"

exit 0

}

if { $::argc > 0 } {

for {set i 0} {$i < [llength $::argc]} {incr i} {

set option [string trim [lindex $::argv $i]]

switch -regexp -- $option {

"--origin_dir" { incr i; set origin_dir [lindex $::argv $i] }

"--project_name" { incr i; set project_name [lindex $::argv $i] }

"--help" { help }

default {

if { [regexp {^-} $option] } {

puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"

return 1

}

}

}

}

}

# Set the directory path for the original project from where this script was exported

set src_dir "[file normalize "$origin_dir/verilog"]"

# Create project

create_project ${project_name} ./${project_name} -part $part_string

# Set the directory path for the new project

set proj_dir [get_property directory [current_project]]

# Reconstruct message rules

# None

# Set project properties

set obj [current_project]

set_property -name "board_connections" -value "" -objects $obj

# set_property -name "board_part" -value "xilinx.com:zc706:part0:1.2" -objects $obj

set_property -name "compxlib.activehdl_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/activehdl" -objects $obj

set_property -name "compxlib.funcsim" -value "1" -objects $obj

set_property -name "compxlib.ies_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/ies" -objects $obj

set_property -name "compxlib.modelsim_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/modelsim" -objects $obj

set_property -name "compxlib.overwrite_libs" -value "0" -objects $obj

set_property -name "compxlib.questa_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/questa" -objects $obj

set_property -name "compxlib.riviera_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/riviera" -objects $obj

set_property -name "compxlib.timesim" -value "1" -objects $obj

set_property -name "compxlib.vcs_compiled_library_dir" -value "$proj_dir/${project_name}.cache/compile_simlib/vcs" -objects $obj

set_property -name "compxlib.xsim_compiled_library_dir" -value "" -objects $obj

set_property -name "corecontainer.enable" -value "0" -objects $obj

set_property -name "default_lib" -value "xil_defaultlib" -objects $obj

set_property -name "dsa.num_compute_units" -value "60" -objects $obj

set_property -name "dsa.rom.debug_type" -value "0" -objects $obj

set_property -name "dsa.rom.prom_type" -value "0" -objects $obj

set_property -name "enable_optional_runs_sta" -value "0" -objects $obj

set_property -name "generate_ip_upgrade_log" -value "1" -objects $obj

set_property -name "ip_cache_permissions" -value "read write" -objects $obj

set_property -name "ip_interface_inference_priority" -value "" -objects $obj

set_property -name "ip_output_repo" -value "$proj_dir/${project_name}.cache/ip" -objects $obj

set_property -name "project_type" -value "Default" -objects $obj

set_property -name "pr_flow" -value "0" -objects $obj

set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj

set_property -name "sim.use_ip_compiled_libs" -value "1" -objects $obj

set_property -name "simulator_language" -value "Mixed" -objects $obj

set_property -name "source_mgmt_mode" -value "All" -objects $obj

set_property -name "target_language" -value "Verilog" -objects $obj

set_property -name "target_simulator" -value "XSim" -objects $obj

set_property -name "xpm_libraries" -value "XPM_MEMORY" -objects $obj

set_property -name "xsim.array_display_limit" -value "1024" -objects $obj

set_property -name "xsim.radix" -value "hex" -objects $obj

set_property -name "xsim.time_unit" -value "ns" -objects $obj

set_property -name "xsim.trace_limit" -value "65536" -objects $obj

# Create 'sources_1' fileset (if not found)

if {[string equal [get_filesets -quiet sources_1] ""]} {

create_fileset -srcset sources_1

}

# Set IP repository paths

set obj [get_filesets sources_1]

set_property "ip_repo_paths" "[file normalize "$origin_dir/verilog/coregen/div_gen_new_ip_core_$ip_fix_string"]" $obj

# Rebuild user ip_repo's index before adding any source files

update_ip_catalog -rebuild

# Set 'sources_1' fileset object

set obj [get_filesets sources_1]

set files [list \

"[file normalize "$origin_dir/verilog/bits_to_bytes.v"]"\

"[file normalize "$origin_dir/verilog/calc_mean.v"]"\

"[file normalize "$origin_dir/verilog/complex_mult.v"]"\

"[file normalize "$origin_dir/verilog/complex_to_mag.v"]"\

"[file normalize "$origin_dir/verilog/complex_to_mag_sq.v"]"\

"[file normalize "$origin_dir/verilog/crc32.v"]"\

"[file normalize "$origin_dir/verilog/deinterleave.v"]"\

"[file normalize "$origin_dir/verilog/delayT.v"]"\

"[file normalize "$origin_dir/verilog/fifo_sample_delay.v"]"\

"[file normalize "$origin_dir/verilog/common_defs.v"]"\

"[file normalize "$origin_dir/verilog/demodulate.v"]"\

"[file normalize "$origin_dir/verilog/descramble.v"]"\

"[file normalize "$origin_dir/verilog/divider.v"]"\

"[file normalize "$origin_dir/verilog/dot11.v"]"\

"[file normalize "$origin_dir/verilog/equalizer.v"]"\

"[file normalize "$origin_dir/verilog/ht_sig_crc.v"]"\

"[file normalize "$origin_dir/verilog/moving_avg.v"]"\

"[file normalize "$origin_dir/verilog/mv_avg.v"]"\

"[file normalize "$origin_dir/verilog/mv_avg_dual_ch.v"]"\

"[file normalize "$origin_dir/verilog/ofdm_decoder.v"]"\

"[file normalize "$origin_dir/verilog/openofdm_rx_s_axi.v"]"\

"[file normalize "$origin_dir/verilog/phase.v"]"\

"[file normalize "$origin_dir/verilog/usrp2/ram_2port.v"]"\

"[file normalize "$origin_dir/verilog/rotate.v"]"\

"[file normalize "$origin_dir/verilog/stage_mult.v"]"\

"[file normalize "$origin_dir/verilog/sync_long.v"]"\

"[file normalize "$origin_dir/verilog/sync_short.v"]"\

"[file normalize "$origin_dir/verilog/openofdm_rx.v"]"\

"[file normalize "$origin_dir/verilog/running_sum_dual_ch.v"]"\

"[file normalize "$origin_dir/verilog/signal_watchdog.v"]"\

"[file normalize "$origin_dir/verilog/phy_len_calculation.v"]"\

"[file normalize "$origin_dir/ip_repo/complex_multiplier/complex_multiplier.xci"]"\

"[file normalize "$origin_dir/ip_repo/atan_lut/atan_lut.coe"]"\

"[file normalize "$origin_dir/ip_repo/atan_lut/atan_lut.xci"]"\

"[file normalize "$origin_dir/ip_repo/viterbi/viterbi_v7_0.xci"]"\

"[file normalize "$origin_dir/ip_repo/deinter_lut/deinter_lut.coe"]"\

"[file normalize "$origin_dir/ip_repo/deinter_lut/deinter_lut.xci"]"\

"[file normalize "$origin_dir/ip_repo/xfft/xfft_v9.xci"]"\

"[file normalize "$origin_dir/ip_repo/rot_lut/rot_lut.coe"]"\

"[file normalize "$origin_dir/ip_repo/rot_lut/rot_lut.xci"]"\

"[file normalize "$origin_dir/ip_repo/div_gen_new/src/div_gen.v"]"\

"[file normalize "$origin_dir/ip_repo/div_gen_new/src/div_gen_div_gen_0_0/div_gen_div_gen_0_0.xci"]"\

"[file normalize "$origin_dir/ip_repo/div_gen_new/src/div_gen_xlslice_0_0/div_gen_xlslice_0_0.xci"]"\

]

# If you want to make a copy of the file to new src folder, use following command

# set imported_files [import_files -fileset sources_1 $files]

# If you want to keep the files remote, use the following command

# set added_files [add_files -fileset sources_1 $files]

add_files -norecurse -fileset $obj $files

# #Set 'sources_1' fileset file properties for remote files

#set file "$origin_dir/verilog/coregen/div_gen_v3_0.ngc"

#set file [file normalize $file]

#set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]

#set_property -name "file_type" -value "NGC" -objects $file_obj

set file "openofdm_rx_s_axi.v"

set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]

set_property -name "used_in" -value "synthesis simulation" -objects $file_obj

set_property -name "used_in_implementation" -value "0" -objects $file_obj

set file "openofdm_rx.v"

set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]

set_property -name "used_in" -value "synthesis simulation" -objects $file_obj

set_property -name "used_in_implementation" -value "0" -objects $file_obj

set file "running_sum_dual_ch.v"

set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]

set_property -name "used_in" -value "synthesis simulation" -objects $file_obj

set_property -name "used_in_implementation" -value "0" -objects $file_obj

set file "signal_watchdog.v"

set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]

set_property -name "used_in" -value "synthesis simulation" -objects $file_obj

set_property -name "used_in_implementation" -value "0" -objects $file_obj

set file "phy_len_calculation.v"

set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]

set_property -name "used_in" -value "synthesis simulation" -objects $file_obj

set_property -name "used_in_implementation" -value "0" -objects $file_obj

# Set 'sources_1' fileset file properties for local files

# Set 'sources_1' fileset properties

set obj [get_filesets sources_1]

set_property -name "top" -value "openofdm_rx" -objects $obj

# Create 'constrs_1' fileset (if not found)

if {[string equal [get_filesets -quiet constrs_1] ""]} {

create_fileset -constrset constrs_1

}

# Set 'constrs_1' fileset object

set obj [get_filesets constrs_1]

# Empty (no sources present)

# Create constraints !

# Set 'constrs_1' fileset properties

set obj [get_filesets constrs_1]

# Create runs

# Create 'sim_1' fileset (if not found)

if {[string equal [get_filesets -quiet sim_1] ""]} {

create_fileset -simset sim_1

}

# Set 'sim_1' fileset object

set obj [get_filesets sim_1]

set files [list \

"[file normalize "$origin_dir/verilog/dot11_tb.v"]"

]

add_files -norecurse -fileset $obj $files

# Empty (no sources present)

# Set 'sim_1' fileset properties

set obj [get_filesets sim_1]

set_property -name "32bit" -value "0" -objects $obj

set_property -name "generic" -value "" -objects $obj

set_property -name "include_dirs" -value "" -objects $obj

set_property -name "incremental" -value "1" -objects $obj

set_property -name "name" -value "sim_1" -objects $obj

set_property -name "nl.cell" -value "" -objects $obj

set_property -name "nl.incl_unisim_models" -value "0" -objects $obj

set_property -name "nl.process_corner" -value "slow" -objects $obj

set_property -name "nl.rename_top" -value "" -objects $obj

set_property -name "nl.sdf_anno" -value "1" -objects $obj

set_property -name "nl.write_all_overrides" -value "0" -objects $obj

set_property -name "source_set" -value "sources_1" -objects $obj

set_property -name "top" -value "dot11_tb" -objects $obj

set_property -name "transport_int_delay" -value "0" -objects $obj

set_property -name "transport_path_delay" -value "0" -objects $obj

set_property -name "verilog_define" -value "" -objects $obj

set_property -name "verilog_uppercase" -value "0" -objects $obj

set_property -name "xelab.dll" -value "0" -objects $obj

set_property -name "xsim.compile.tcl.pre" -value "" -objects $obj

set_property -name "xsim.compile.xvhdl.more_options" -value "" -objects $obj

set_property -name "xsim.compile.xvhdl.nosort" -value "1" -objects $obj

set_property -name "xsim.compile.xvhdl.relax" -value "1" -objects $obj

set_property -name "xsim.compile.xvlog.more_options" -value "" -objects $obj

set_property -name "xsim.compile.xvlog.nosort" -value "1" -objects $obj

set_property -name "xsim.compile.xvlog.relax" -value "1" -objects $obj

set_property -name "xsim.elaborate.debug_level" -value "typical" -objects $obj

set_property -name "xsim.elaborate.load_glbl" -value "1" -objects $obj

set_property -name "xsim.elaborate.mt_level" -value "auto" -objects $obj

set_property -name "xsim.elaborate.rangecheck" -value "0" -objects $obj

set_property -name "xsim.elaborate.relax" -value "1" -objects $obj

set_property -name "xsim.elaborate.sdf_delay" -value "sdfmax" -objects $obj

set_property -name "xsim.elaborate.snapshot" -value "" -objects $obj

set_property -name "xsim.elaborate.xelab.more_options" -value "" -objects $obj

set_property -name "xsim.simulate.custom_tcl" -value "" -objects $obj

set_property -name "xsim.simulate.log_all_signals" -value "0" -objects $obj

set_property -name "xsim.simulate.runtime" -value "1000ns" -objects $obj

set_property -name "xsim.simulate.saif" -value "" -objects $obj

set_property -name "xsim.simulate.saif_all_signals" -value "0" -objects $obj

set_property -name "xsim.simulate.saif_scope" -value "" -objects $obj

set_property -name "xsim.simulate.tcl.post" -value "" -objects $obj

set_property -name "xsim.simulate.wdb" -value "" -objects $obj

set_property -name "xsim.simulate.xsim.more_options" -value "" -objects $obj

# Create 'synth_1' run (if not found)

if {[string equal [get_runs -quiet synth_1] ""]} {

create_run -name synth_1 -part $part_string -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1

} else {

set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]

set_property flow "Vivado Synthesis 2018" [get_runs synth_1]

}

set obj [get_runs synth_1]

set_property set_report_strategy_name 1 $obj

set_property report_strategy {Vivado Synthesis Default Reports} $obj

set_property set_report_strategy_name 0 $obj

# Create 'synth_1_synth_report_utilization_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {

create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1

}

set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.pblocks" -value "" -objects $obj

set_property -name "options.cells" -value "" -objects $obj

set_property -name "options.slr" -value "0" -objects $obj

set_property -name "options.packthru" -value "0" -objects $obj

set_property -name "options.hierarchical" -value "0" -objects $obj

set_property -name "options.hierarchical_depth" -value "" -objects $obj

set_property -name "options.hierarchical_percentages" -value "0" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

set obj [get_runs synth_1]

set_property -name "constrset" -value "constrs_1" -objects $obj

set_property -name "description" -value "Vivado Synthesis Defaults" -objects $obj

set_property -name "flow" -value "Vivado Synthesis 2018" -objects $obj

set_property -name "name" -value "synth_1" -objects $obj

set_property -name "needs_refresh" -value "0" -objects $obj

set_property -name "srcset" -value "sources_1" -objects $obj

# set_property -name "incremental_checkpoint" -value "" -objects $obj

set_property -name "include_in_archive" -value "1" -objects $obj

set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj

set_property -name "steps.synth_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.synth_design.tcl.post" -value "" -objects $obj

set_property -name "steps.synth_design.args.flatten_hierarchy" -value "rebuilt" -objects $obj

set_property -name "steps.synth_design.args.gated_clock_conversion" -value "off" -objects $obj

set_property -name "steps.synth_design.args.bufg" -value "12" -objects $obj

set_property -name "steps.synth_design.args.fanout_limit" -value "10000" -objects $obj

set_property -name "steps.synth_design.args.directive" -value "Default" -objects $obj

set_property -name "steps.synth_design.args.retiming" -value "0" -objects $obj

set_property -name "steps.synth_design.args.fsm_extraction" -value "auto" -objects $obj

set_property -name "steps.synth_design.args.keep_equivalent_registers" -value "0" -objects $obj

set_property -name "steps.synth_design.args.resource_sharing" -value "auto" -objects $obj

set_property -name "steps.synth_design.args.control_set_opt_threshold" -value "auto" -objects $obj

set_property -name "steps.synth_design.args.no_lc" -value "0" -objects $obj

set_property -name "steps.synth_design.args.no_srlextract" -value "0" -objects $obj

set_property -name "steps.synth_design.args.shreg_min_size" -value "3" -objects $obj

set_property -name "steps.synth_design.args.max_bram" -value "-1" -objects $obj

set_property -name "steps.synth_design.args.max_uram" -value "-1" -objects $obj

set_property -name "steps.synth_design.args.max_dsp" -value "-1" -objects $obj

set_property -name "steps.synth_design.args.max_bram_cascade_height" -value "-1" -objects $obj

set_property -name "steps.synth_design.args.max_uram_cascade_height" -value "-1" -objects $obj

set_property -name "steps.synth_design.args.cascade_dsp" -value "auto" -objects $obj

set_property -name "steps.synth_design.args.assert" -value "0" -objects $obj

set_property -name "steps.synth_design.args.more options" -value "" -objects $obj

# set the current synth run

current_run -synthesis [get_runs synth_1]

# Create 'impl_1' run (if not found)

if {[string equal [get_runs -quiet impl_1] ""]} {

create_run -name impl_1 -part $part_string -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1

} else {

set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]

set_property flow "Vivado Implementation 2018" [get_runs impl_1]

}

set obj [get_runs impl_1]

set_property set_report_strategy_name 1 $obj

set_property report_strategy {Vivado Implementation Default Reports} $obj

set_property set_report_strategy_name 0 $obj

# Create 'impl_1_init_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "0" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_opt_report_drc_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {

create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.upgrade_cw" -value "0" -objects $obj

set_property -name "options.checks" -value "" -objects $obj

set_property -name "options.ruledecks" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_opt_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "0" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "0" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_place_report_io_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {

create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_place_report_utilization_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {

create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.pblocks" -value "" -objects $obj

set_property -name "options.cells" -value "" -objects $obj

set_property -name "options.slr" -value "0" -objects $obj

set_property -name "options.packthru" -value "0" -objects $obj

set_property -name "options.hierarchical" -value "0" -objects $obj

set_property -name "options.hierarchical_depth" -value "" -objects $obj

set_property -name "options.hierarchical_percentages" -value "0" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_place_report_control_sets_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {

create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.verbose" -value "1" -objects $obj

set_property -name "options.cells" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {

create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.cells" -value "" -objects $obj

set_property -name "options.hierarchical" -value "0" -objects $obj

set_property -name "options.hierarchical_depth" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {

create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.cells" -value "" -objects $obj

set_property -name "options.hierarchical" -value "0" -objects $obj

set_property -name "options.hierarchical_depth" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_place_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "0" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "0" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "0" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "0" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_route_report_drc_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {

create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.upgrade_cw" -value "0" -objects $obj

set_property -name "options.checks" -value "" -objects $obj

set_property -name "options.ruledecks" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_route_report_methodology_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {

create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.checks" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_route_report_power_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {

create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.advisory" -value "0" -objects $obj

set_property -name "options.xpe" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_route_report_route_status_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {

create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.of_objects" -value "" -objects $obj

set_property -name "options.route_type" -value "" -objects $obj

set_property -name "options.list_all_nets" -value "0" -objects $obj

set_property -name "options.show_all" -value "0" -objects $obj

set_property -name "options.has_routing" -value "0" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_route_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "0" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {

create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.cells" -value "" -objects $obj

set_property -name "options.hierarchical" -value "0" -objects $obj

set_property -name "options.hierarchical_depth" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_route_report_clock_utilization_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {

create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.write_xdc" -value "0" -objects $obj

set_property -name "options.clock_roots_only" -value "0" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)

if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {

create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1

}

set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]

if { $obj != "" } {

set_property -name "is_enabled" -value "1" -objects $obj

set_property -name "options.check_timing_verbose" -value "0" -objects $obj

set_property -name "options.delay_type" -value "" -objects $obj

set_property -name "options.setup" -value "0" -objects $obj

set_property -name "options.hold" -value "0" -objects $obj

set_property -name "options.max_paths" -value "10" -objects $obj

set_property -name "options.nworst" -value "" -objects $obj

set_property -name "options.unique_pins" -value "0" -objects $obj

set_property -name "options.path_type" -value "" -objects $obj

set_property -name "options.slack_lesser_than" -value "" -objects $obj

set_property -name "options.report_unconstrained" -value "0" -objects $obj

set_property -name "options.warn_on_violation" -value "1" -objects $obj

set_property -name "options.significant_digits" -value "" -objects $obj

set_property -name "options.cell" -value "" -objects $obj

set_property -name "options.more_options" -value "" -objects $obj

}

set obj [get_runs impl_1]

set_property -name "constrset" -value "constrs_1" -objects $obj

set_property -name "description" -value "Default settings for Implementation." -objects $obj

set_property -name "flow" -value "Vivado Implementation 2018" -objects $obj

set_property -name "name" -value "impl_1" -objects $obj

set_property -name "needs_refresh" -value "0" -objects $obj

set_property -name "pr_configuration" -value "" -objects $obj

set_property -name "srcset" -value "sources_1" -objects $obj

# set_property -name "incremental_checkpoint" -value "" -objects $obj

set_property -name "include_in_archive" -value "1" -objects $obj

set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj

set_property -name "steps.opt_design.is_enabled" -value "1" -objects $obj

set_property -name "steps.opt_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.opt_design.tcl.post" -value "" -objects $obj

set_property -name "steps.opt_design.args.verbose" -value "0" -objects $obj

set_property -name "steps.opt_design.args.directive" -value "Default" -objects $obj

set_property -name "steps.opt_design.args.more options" -value "" -objects $obj

set_property -name "steps.power_opt_design.is_enabled" -value "0" -objects $obj

set_property -name "steps.power_opt_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.power_opt_design.tcl.post" -value "" -objects $obj

set_property -name "steps.power_opt_design.args.more options" -value "" -objects $obj

set_property -name "steps.place_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.place_design.tcl.post" -value "" -objects $obj

set_property -name "steps.place_design.args.directive" -value "Default" -objects $obj

set_property -name "steps.place_design.args.more options" -value "" -objects $obj

set_property -name "steps.post_place_power_opt_design.is_enabled" -value "0" -objects $obj

set_property -name "steps.post_place_power_opt_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.post_place_power_opt_design.tcl.post" -value "" -objects $obj

set_property -name "steps.post_place_power_opt_design.args.more options" -value "" -objects $obj

set_property -name "steps.phys_opt_design.is_enabled" -value "0" -objects $obj

set_property -name "steps.phys_opt_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.phys_opt_design.tcl.post" -value "" -objects $obj

set_property -name "steps.phys_opt_design.args.directive" -value "Default" -objects $obj

set_property -name "steps.phys_opt_design.args.more options" -value "" -objects $obj

set_property -name "steps.route_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.route_design.tcl.post" -value "" -objects $obj

set_property -name "steps.route_design.args.directive" -value "Default" -objects $obj

set_property -name "steps.route_design.args.more options" -value "" -objects $obj

set_property -name "steps.post_route_phys_opt_design.is_enabled" -value "0" -objects $obj

set_property -name "steps.post_route_phys_opt_design.tcl.pre" -value "" -objects $obj

set_property -name "steps.post_route_phys_opt_design.tcl.post" -value "" -objects $obj

set_property -name "steps.post_route_phys_opt_design.args.directive" -value "Default" -objects $obj

set_property -name "steps.post_route_phys_opt_design.args.more options" -value "" -objects $obj

set_property -name "steps.write_bitstream.tcl.pre" -value "" -objects $obj

set_property -name "steps.write_bitstream.tcl.post" -value "" -objects $obj

set_property -name "steps.write_bitstream.args.raw_bitfile" -value "0" -objects $obj

set_property -name "steps.write_bitstream.args.mask_file" -value "0" -objects $obj

set_property -name "steps.write_bitstream.args.no_binary_bitfile" -value "0" -objects $obj

set_property -name "steps.write_bitstream.args.bin_file" -value "0" -objects $obj

set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj

set_property -name "steps.write_bitstream.args.logic_location_file" -value "0" -objects $obj

set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj

set_property -name "steps.write_bitstream.args.more options" -value "" -objects $obj

# set the current impl run

current_run -implementation [get_runs impl_1]

puts "INFO: Project created:$project_name"

#--------to avoid IP error message (parameter error or not found, need to be reported status and upgraded)-------

update_compile_order -fileset sources_1

report_ip_status -name ip_status

upgrade_ip [get_ips {atan_lut complex_multiplier deinter_lut div_gen_div_gen_0_0 div_gen_xlslice_0_0 rot_lut viterbi_v7_0 xfft_v9}] -log ip_upgrade.log

export_ip_user_files -of_objects [get_ips {atan_lut complex_multiplier deinter_lut div_gen_div_gen_0_0 div_gen_xlslice_0_0 rot_lut viterbi_v7_0 xfft_v9}] -no_script -sync -force -quiet

update_compile_order -fileset sources_1

report_ip_status -name ip_status